Configuring X5 with Linksys WRT54GL in full and half bridge mode

Hi
I have a Linksys WRT54GL and I want to configure this one with my Zoom X5. How I can configure the Zoom X5 in Full Bridge Mode with my WRT54GL? My other questions is that I can configure my PC (Win XP) with my X5 in half bridge mode successful (It lease a Valid ISP IP address), but when I configure my WRT54GL this one don t lease a valid address. How can I configure the WRT54GL or the X5?
Thanks.

once the modem is configured in full bridge mode , setup a PPPoE connection on the router....use the username and password provided by the ISP to configure the PPPoE connection....

Similar Messages

TS2771 My ipod touch 4g doesn't work i didnt have charger at first and when my cousins came over i charged it with his it was full and the next minute it was empty. it gave me the warning sign. After tht it shut off and i ot my charger today and it wont t

My ipod touch 4g doesn't work i didnt have charger at first and when my cousins came over i charged it with his it was full and the next minute it was empty. it gave me the warning sign. After tht it shut off and i ot my charger today and it wont turn on it also gave me a blue light which was kinda like an electric shock. Someone help plz

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Unable to Open Full and Mini Bridge in CS6

I recently purchased the Student & Mac edition of CS6 and installed it on my Mac OS X 10.7.5. I'm entirely new to CS and was following some video tutorials online, when I discovered that both the full and mini bridge components will not open. If I try to open mini bridge in Photoshop, I get a message "Waiting for Bridge CS6." If I attempt to open Bridge through the file dropdown or from the application file itself, I get an error message that says the operation cannot be completed.
I followed all of Adobe's recommendations here with no success: http://helpx.adobe.com/photoshop/kb/error-waiting-for-bridge-cs5.html I have searched this forum as well, but a similar post was solved by uninstalling a previous version of CS, which is not applicable to me.
Does anyone have any additional suggestions for me? Please let me know if I can provide additional information that is helpful. Thank you very much.

If you also tried a new user account for testing and it did not work there then it indicates you have a false install or install DVD, you might want to use the official uninstaller for Adobe, then use the cleaner tool:
http://www.adobe.com/support/contact/cscleanertool.html
Read the instructions before acting and make sure you deactivate first and have the correct serial number at hand!
And then make sure you have a legal copy of your install DVD / download installer.
Also before reinstall it might be wise to first run a check and repair permissions using your Apple Disk Utilty (Applications/ Utilities /Apple Disk Utility)
Then try again to install.

How to configure network printer with Linksys WRT54GL router network

I just bought a Linksys WRT54GL router and I am planning to build the following home-network around it:
1. A desktop computer connected to router via ethernet cable (hard-wired).
2. An HP Network Printer (Color LaserJet CM1312 MFP) connected to router via ethernet cable (hard-wired).
3. A notebook connected to router via Wi-Fi.
I want both computers (desktop and notebook) to be able to share files, and also to share the same network printer.
a. How do I do this?
b. Do I need to install the printer drivers in both computers as if the printer was local for each one?
c. What settings do I need to include in the Linksys router settings (and also the printer settings) to allow all this? I've read on the internet about DHCP configs, IP address, etc. but I hardly understand anything.
A step-by-step ("for dummies") explanation will be extremely appreciated.

You will need to install the printer driver on each computer that will be using the printer. You will need to have a printer driver that is designed to be used on a network. Many of HP's drivers (but not all of them) can be used for either a USB or a network connection.
Usually, when you use HP's printer installation software, it will walk you through the printer installation procedure, and install the printer drivers. This software is normally located on a CD that came with the printer. Some installation software demands that you setup a USB connection first, then switch to a network connection. Other installation software might install a network connection directly. Just follow the HP directions.
There are no special settings in the router. Simply wire (using an ethernet cable) your printer to a LAN port on the router, when the installation software (or instructions) tells you to do so.
Your printer will likely get a different LAN IP address (192.168.1.x ) from time to time. Some printer drivers can handle this and still work properly. Other printer drivers get confused, and cannot find your printer when it changes addresses. If your driver has this problem, then you will need to assign your printer a fixed LAN IP address. This will force the printer to have the same LAN IP address each time you boot up your network. If you need to do this, you will need to enter the LAN IP address directly into your printer (Sometimes this is done using the printer's buttons and display panel, and sometimes this is done using HP printer software). Note that any fixed LAN IP address must be outside your DHCP server range (defaults are 192.168.1.100 thru 192.168.1.149 ) , and it cannot end in 0, 1, or 255. If you need to use a fixed LAN IP address, I would suggest you use 192.168.1.13 , which should be easy to remember by looking at the model number of your printer. If you need to use a fixed LAN IP address, you will also need to enter the Subnet Mask 255.255.255.0, Default Gateway 192.168.1.1 , and DNS Server 192.168.1.1 , into your printer. If you use a fixed LAN IP address in the printer, you do not need to change any settings in the router. The router will automatically find your printer when you turn your printer on. Even if your printer is using a fixed LAN IP address, your computers can continue to get their address automatically from the router's DHCP server.

Access Modem if Static IP and in Bridged Mode

i am assuming it is in bridged mode as my firewall uses the static ip. however, how do
i access the modem to change the password? do i have to plug a computer into it? i
have not been able to figure out how to access it from one of the computers on the
network. thanks.

#1 What is the brand and model of your modem?
#2 What is the brand and model of your router?
#3 Do you have a stand alone hub?
#4 Or if not to question number 3, do you have an unmanaged swtich?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Configuring IPCop with Linksys PAP2 Adapter

I want to configure my Linksys PAP2 Adapter with the IpCop.. Any thing regarding this can be very helpfull....
Thanks

Hi… I think IpCop is just another router, so just go ahead and install the PAP2 as per instructions. Only thing is that IPCop have only one Ethernet port, so get a switch and connect the IpCop to the switch and connect the PAP2 to the switch. Revert back if have any specific error while configuring the PAP2.

AX with Linksys wrt54GL?

Has anyone been able to get the AX to work in remote mode with the linksys router? I want to use it to serve as a wireless nic for my desktop.
-Grant

If your Linksys router is DD-WRT ready, here are a few articles that may prove helpful:
- http://www.macosxhints.com/article.php?story=20060609053254368&query=linksys%2Bw rt54g
- http://ryanschwartz.net/2004/08/05/airtunes-airport-express-and-the-wrt54g
- http://www.dd-wrt.com/wiki/index.php?title=WDSLinked_routernetwork

Problem in configuring SSL with IIS 5.0 server and weblogic 6.1

Dear Freinds,
I m configuring the IIS 5.0 and weblogic 6.1.
I M using IIS and Proxy and Weblogic as Main Server.
I m able to route the Http request from IIS to wblogic but when i type in Https for
connecting to the weblogic resources it throws error and says that SSL is not Initialized.
I m using the Bea document for configuring the same.
Please Help me ASAP.
Thanks
Praveen Rana

In the environment definition,
-> External Application JDBC
-> Properties
-> Outbound JDBC Connection
You have the database URL in the "DriverProperties" field
Valid URL would be : jdbc:mysql://localhost:3306/caps
!! The doc says that this field is optional !! Seems to be an error in the doc:
Hope this helps
Seb

IPhoto with Adobe Photoshop Elements 4 and Adobe Bridge

I have not used iPhoto before now as I have been downloading photos from my Canon and Nikon cameras using their software. I have now moved everything into iPhoto but cannot find iPhoto using Adobe Bridge so I am unable to do any editing using Elements 4. Previously I could find the Canon and Nikon photos using Adobe Bridge. With a simple click on the relevant photo it opened up in Adobe Photoshop Elements 4 and I was able to edit it. Now using Bridge I simply cannot find iPhoto thus I cannot use PSE4. Can someone help before I go crazy ? I havde called Apple support but they have been unable to help me and suggested using Discussions@Apple

Many thanks for your quick response although, as a new iMac user, the mere mention of the word "corrupt" scares me ! I previously used a PC with Windows XP and PSE3 and loved being able to sort all my photos into albums with PSE3. Unfortunately the PSE4 which I have installed on my iMac doesn't let users sort their photos into albums and the only alternative is Adobe Bridge. I only recently started to use iPhoto after a visit to an Apple Store and it's great being able to catalog my photos so easily. Unfortunately PSE is far and away superior to any editing software that iPhoto has to offer. Anyway, I'll cross my fingers and try your suggestion first thing tomorrow morning.

I'm running FF 3.6.17 and when I try to log into my Blackboard page, I get an error message, "no user is currently logged in." I have noticed that some have had compatibility problems with earlier versions of FF and Blackboard, but what gives?

This recently upgraded version of Blackboard is also giving me problems with IE, and even Google Chrome. Regardless of which Windows OS I try. On these others, however, I can log in, I just can't edit.
Blackboard tech support has been blundering with this issue for two and half weeks now. But to no avail. So, I'm wondering if going back to an earlier version of FF would help.

unfortunately the fiddler2 issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
<br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

Server app : random errors in configuration applied with configuration profile

When I verify the informations contained in the user configuration profile with both the profile manager and textmate everything is ok. When i installs the configuration profile on a computer there are errors in the configuration of Mail app the email address is configured as follows: [email protected] instead of: [email protected] and username is: [email protected] instead of : user1 . Both server and client computers are on running mac os x 10.8.
thanks for the help !

When I verify the informations contained in the user configuration profile with both the profile manager and textmate everything is ok. When i installs the configuration profile on a computer there are errors in the configuration of Mail app the email address is configured as follows: [email protected] instead of: [email protected] and username is: [email protected] instead of : user1 . Both server and client computers are on running mac os x 10.8.
thanks for the help !

Problems with XB3 gateway; it won't connect to internet properly in bridge mode

I recently moved to a new area and had to replace my old gateway from the other comcast franchise with a new one. The new one has built-in wifi. Ever since I got the new gateway, my connection has been slow and unreliable, especially when more than one person is trying to use a computer at once, and I do not like that this wifi is interfering with the setup I was previously happy with using my airport time capsule as a router, with my old airport express in bridge mode for airtunes use. In that setup with the same people and devices and use habits I did not have these problems. I looked for directions on how to disable the built-in wifi (I also don't like just putting out connections I do not use, it feels like a waste of my signal and a security risk!) and followed the instructions i found on this forum which seemed very simple. I logged in to the gateway and turned bridge mode on, restarted everything, switched the time capsule back OUT of bridge mode... and my time capsule and airport were all green, as well as the online login to the gateway saying it was connected to the internet, but my time capsule showed that there was no internet connection and in terms of loading web pages... deifnitely the time capsule was correct in that I was not getting a connection. My computers and devices weren't showing up on the gateway's page as "connected devices" either. I've tried multiple times, reset everything multiple times, and rechecked directions but for now I had to re-enable the wifi and suddenly i can get online again. (And no, it's not that my computer is actually using those netowrks - I'm on my Time Capsule's network and checking the status through the airport utility.) I really want to get this extra wifi disabled and see if that resolves my crappy connection problems because the service is just useless in the evening as it is now! If anyone knows what might be wrong, I'd appreciate the help. Everything should be on pretty standard settings as far as my Time Capsule and Airport go - Airport is just in client mode, TC has to be in bridge mode when the other wifi is on or I get errors, but i haven't done anything fancy with any of its settings.

Hi, since you have 2 Linksys devices and it's hard to pinpoint the exact problem. You might the try doing changes on both Linksys devices.
WRT54GX2
- update or reflash the firmware
- change the channel from auto to 11 or 1
- change the beacon interval value to 50
WMP54GX
- download and update to the latest drivers

Bridge Mode and Wireless Clients

I have my network up and running fine, but I am now thinking I may need to tweak it a bit. I have an AEBS(n) and an Airport Express both set up with WDS. The Extreme is the base station and the Express is set in WDS Remote and in Bridge mode under the internet tab. The Express is hooked up via a wired ethernet connection to my PS3. Everything works.
I am wondering if in bridge mode, the express accepts wireless clients as well as providing net access to my PS3 over the ethernet cable. Both the extreme and express stations are close enough together that I am not sure which one I am connecting to when I use my laptop wifi.
Thanks in advance for your help.

I am wondering if in bridge mode, the express accepts wireless clients as well as providing net access to my PS3 over the ethernet cable.
Yes if you enable that option.

HT3477 I am attempting to set up a guest network. When I change the Network settings to DHCP NAT I get a message that tells me that the service has a private IP address and so I must connect using off bridge mode. In this mode I can not connect to the int

I am attempting to set up a guest network on the Airport Extreme Base Station. The Base Station is connected to a DSL Modem. The network is also extended using an Airport Express. When I have attempted to set up the Base Station using DHCP NAT in the netword feature I get a message that because the service has a private IP address the only way that I can connect is in Off Bridge Mode. In this mode I do not seem to be able to connect to the internet using the guest network. Any suggestions would be helpful.

Ok, your Speedport is actually a combination DSL modem and wireless router. In this case you would typically configure a downstream router, like your AirPort Extreme in Bridge mode. Unfortunately, when in Bridge mode, the AirPort does NOT support providing a guest network.
The only possible option is to reconfigure the Speedport as a bridge and use the Extreme as your Internet router. You would still need the DSL modem provided by the Speedport for Internet connectivity.

How to setup LAPAC1750-PRO with LAPAC1750 Workgroup Bridge Mode as WiFi Extender

I've got following devices:
1 LRT224 Dual WAN Gigabit VPN Router (Load Balancing)
2 LAPAC1750-PRO Access Points
6 LAPAC1750 Access Points
I'm supposed to make a Cluster between 2 LAPAC1750-PRO and then connect the 6 LAPAC1750 using Workgroup Bridge Mode, but after purchasing and while configuring, I found the strage thing that:
If I need to setup a Workgroup Bridge Mode, the clustering will not be available (so I need to modify the changes on either PRO APs whenever I need to perform some) and the Bridge Mode needs to be disable if Clustering is ON or vice versa.
Spoiler (Highlight to read)
+--- The Configuration ---+
I've made 2 subnets:
192.168.1.x (Existing)
192.168.10.x (New)
and configured 4 APs on each (1 PRO and 3 Normal using Trunking between 2 HP 1910 24 Switches) and then again found some strange thing that:
Only 1 Normal AP can be connected to PRO in a Workgroup Bridge Mode, and vice versa.
+--- The Configuration ---+I've made 2 subnets:192.168.1.x (Existing)192.168.10.x (New)and configured 4 APs on each (1 PRO and 3 Normal using Trunking between 2 HP 1910 24 Switches) and then again found some strange thing that: Only 1 Normal AP can be connected to PRO in a Workgroup Bridge Mode, and vice versa.
+--- The Problem ---+
--- Please correct me if I'm wrong
It supposed to extend the Wireless Range, therefore I need to do the following:
PRO AP needs to connect to the AP 1 of and the AP 1 then connects to AP 2 and so on in Workgroup Bridge Mode ...
OR
All the APs needs to connect to the PRO one by registering one by one in Workgroup Bridge Mode
Thanx in Advance

Thanx! The information is very helpful.

Configuring X5 with Linksys WRT54GL in full and half bridge mode

Similar Messages

Maybe you are looking for