Confilicts with XP "Remote Desktop" and ZFD4 "Remote Control"

He have a similar problem like this. Some machines, after installing Zen4
agent, after first login, the WS reboot automatically every time.
He have discovered a conflit with display adapter ( Intel eXtreme graphics
2 ).
Resolution: With workstation at CTRL+ALT+DEL or password prompt, access
the registry of this machine with a remote admin WS. At the
HKLM\Software\Microsoft\Windows\Current Version\Run commands, find startup
tools from the display adapter, like HotKeysCmds -> C:\Windows\System32
\hkcmd.exe and remove them from registry.
Logon at the WS and if it run fine, reinstall the display adapter.
I hope this help you.
Regards,
BJ
> Current workstation Configuration - WinXP(SP1), Client32
> (483sp1),Enabled
> Microsoft Remote Desktop (Used to connect to machine via NAT at
> Firewall),
> ZFD4 at server. I installed ZFD4 management agent as local
> administrator
> with no problem. However on initial reboot, the machine would not
> boot
> normally and was stuck in a reboot loop. I was able to oot into safe
> mode
> however, unable to un-install the ZFD4 remote agent.
>
> 1) Is there some type of conflict between the two "Remote Control"
> applications.
>
> 2)How do I correct the current reboot loop.
>
> 3)What is the best scenario to remote control a desktop via VPN or
> NAT,
> keeping in mind that I may not have the Netware Client loaded on all
controlling workstations.
>
>
>

I'm not sure if Apple Remote can, but
Microsoft offers a free program called Remote Desktop Connection so you can do just that.
www.microsoft.com/mac

Similar Messages

OSX Remote Desktop and RDGateway Remote Resources

Is it possible or planned to support RDGateway for published Remote Resources, using Microsoft Remote Desktop for OSX?
thanks

Hi,
I have just confirmed with the product group, RD Gateway is supported for Remote Resources. It does not have dedicated settings for Remote Resources.
Furthermore, the feed server (RDWeb) must be reachable by the client. If a GW is needed then the administrator must have configured the published apps to use one.
More information:
Checklist: Make RemoteApp Programs Available from the Internet
http://technet.microsoft.com/en-us/library/cc772415.aspx
Configure the Remote Desktop Web Access Server to Allow Access from the Internet
http://technet.microsoft.com/en-us/library/cc770330.aspx
Many Obstacles in Publishing RemoteApps to the Internet in Windows Server 2012
http://social.technet.microsoft.com/wiki/contents/articles/22276.many-obstacles-in-publishing-remoteapps-to-the-internet-in-windows-server-2012.aspx
Best Regards.
Jeremy Wu
TechNet Community Support

Only Remote-Desktop and Replication with 0.0 Reduction

Hi guys,
I have a solution with 16 WAAS 4.4.3 and I got good numbers in all default applications except Remote-Desktop and Replication
( All Traffic 53% of Reduction).
I can understand not otimize Remote-Desktop Applications cause the customer is using Metaframe with crypto and already compacted and
using too RDP with crypto/compacted.
But in the Replication I would expect some gain in Active Directory and MS-FRS Replication.
I got 0.0, Actually, the optmized traffic is biggest that the Original Traffic.
I have to modify something in the Microsoft servers to be able to got reduction in Replication Application ??
I'm using all the Default Classifiers in Replication Application
Double-Take                            LZ+TFO+DRE       1100, 1105
EMC-Celerra-Replicator            LZ+TFO+DRE       8888
MS-AD-Replication1                 LZ+TFO+DRE       UUID:e3514235-4b06-11d1-ab04-00c04fc2dcd2
ms-content-repl-srv                   TFO                     507, 560
MS-FRS1                                LZ+TFO+DRE       UUID:f5cc59b4-4264-101a-8c59-08002b2f8426
netapp-snapmirror                    LZ+TFO+DRE       10565-10569
pcsync-http                             LZ+TFO+DRE       8444
pcsync-https                           TFO                      8443
rrac                                        TFO                      5678
Rsync                                     LZ+TFO+DRE       873
Thanks a Lot
My Best Regards,
Andre Lomonaco

As you said, you need to only send the changes over the line.
Java can not tell you what has changed, so you need to either write some JNI, or do a check on the current image, with the last image. (this would eat quite a bit of CPU time on the server).
It might be worth looking at the source for VNC, and other simler products.
The simpliest solution would be to split the image into blocks of x by y pixels, then do a pixel-by-pixel check on that block, and only send the block if it has changed.
Next thing to think about is scrapping RMI, and using raw sockets. RMI has a fair sized overhead.
Zipping a JPEG is unlikely to have any effect. A JPEG is already compressed.
You might want to look at a lossless compression format, like PNG, as the JPEG will have articles. This might be acceptable. If so, changing the compression ratio of the JPEG might be an option.
Finally, the bottle neck might be the call to Robot.createScreenCapture. This is not the fastest method.

Apple Remote Desktop and controlling over VPN

Hi All,
I had a question about whether something was possible and if so if someone could point me to instructions/how-to on setting it up.
I have three Macs I am administering. One is an iMac that stays in the office on the network. Two are MBP's. One is always at a remote location, the other comes in and out of the office. I work remotely administering the server and the three systems. I have the latest version of Apple Remote Desktop and obviously can access the server fine. I was wondering though if there is any way besides having the person give me their IP address every time that through the VPN I can see their system, then access it in Remote Desktop just like we are on the network together? Basically they connect to the network via VPN if they are remote and I do the same thing and then access their machine.
I hope that makes sense. I went through different parts of the guide for ARD but didn't come across a method like that described in there.
Anyone with opinions? Thoughts? Chants of I'm an idiot? haha
Thanks

Yeah for some reason I cannot get this to work right. Even if I scan the 5 VPN IP's I have setup I cannot see their machines when I am connected to the VPN. I tested it the other day by connecting one of the systems to an outside internet connection, then logged it into the VPN. I then connected my own to a different source and logged into the VPN, but Remote Desktop just won't find it.
Just not sure why it doesn't work. I can see the computers on our internal network though, just not any connected via VPN.

Remote Desktop and Snow Leopard Server

What is the best way to use Remote Desktop with Snow Leopard Server?
I purchased a mac mini with snow leopard server and Remote desktop so I can easily manage my 11 computers, install and upgrade software etc. etc.
The mac mini server will basically be nothing but a server.
I will use as my main computer a mac pro. Do I need to install Remote Desktop on the server and on my mac pro? What is the best way to deploy the services of Remote desktop and mac os x server?

You install Apple Remote Desktop on the machine you want to control from. In this case, install on your Mac Pro. All you have to do on the clients (controlled Macs) is enable remote management in the System Preferences under Sharing. Just make sure that all your controlled Macs are up to date on their ARD version (v3.3.2) which can be taken care of from Software Update.

Remote desktop and apache

remote desktop and apache.
There are times I feel that someone is looking over my shoulder, and changing my settings and controlling me.
I would like to at least be able to communicate with them so I can ltarn. I also want to be able to monitor and have some say so as to what they are doing to my computer.
Thank you

Thanx for your reply.
I should have stated that this is my personal computer and if any one should be the administrator I would think it would be me.

I don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp.

i don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp

Hi champrider,
You can use an application such as Apple Remote Desktop to control your iMac remotely. See this article -
OS X Mavericks: Allow access using Apple Remote Desktop
This help page will provide you with some other useful resources for Apple Remote Desktop -
Remote Desktop Help
Thanks for using Apple Support Communities.
Best,
Brett L

Apple Remote Desktop and WildBlue Excede

I am trying, without luck, to get Remote Desktop to work with WildBlue Excede. Can port forwarding be established with their Surfbeam2 Satellite Modem? If so, what are the port numbers, and how is it done?
Has anyone had success in setting up Apple Remote Desktop and WildBlue?
WildBlue Technical Support said they do not provide static IP addresses, so it couldn't be done. Something tells me that is not true.
Has anyone had any luck with WildBlue?
Many thanks

Hi Paul,
Are you trying to connect to a computer that's connect to the internet with wildblue excede? or are you trying to connect to a computer some where else while your connect to the internet with wildeblue excede?
Ether way, have you considered an altertive solution? For instance LogMeIn?

Remote Desktop and Airport

Dear All,
I have an iMac which is connected to the internet via Airport Extreme, with no direct ethernet connection. I am trying to connect back to the computer via Remote Desktop and using the automatic IP address which is assigned. (Setings->Network)
I cannot access this IP address via Remote Desktop. Any Ideas?
Harry

Harry Ringwood wrote:
I have an iMac which is connected to the internet via Airport Extreme, with no direct ethernet connection. I am trying to connect back to the computer via Remote Desktop and using the automatic IP address which is assigned. (Setings->Network)
I suppose you mean you're trying to connect to your Mac from outside your LAN. The address you see in the Network panel of System Preferences is a LAN address. To make what you want to do work, (1) from the remote computer you're going to have to specify the WAN address of the AirPort Extreme and (2) configure the AirPort Extreme (via port mapping) to pass the Remote Desktop signals to your iMac. To see the port mapping settings, in AirPort Utility look at the Advanced panel.

I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

Probably. You may be able to use Finder > Go > Connect to server to access the server. You may be able to share folders using Remote Desktop too. Whichever one you like the best.

Windows 8.1 Update - Remote Desktop missing from Remote Tab

I recently purchased a new Lenovo G780 with Windows 8. I updated to Windows 8.1 this past weekend.
I was surprised to find the "Remote Desktop" section (on Remote tab in System Properties) was missing. I can see "Remote Access Assistance" but not "Remote Desktop". Note that I can run Remote Desktop to connect to another computer, but w/out this setting I am UNABLE to accept incoming remote desktop requests.
I did find a link related to my very same issue, though for an earlier windows version.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/e51a7001-85f7-4578-af65-6dee5a35c261/...
I have same symptom, just newer OS I can only surmise that my Windows 8.1 update messed something up. It may be possible this was the situation before I updated to Windows 8.1, as I don't think I messed with that setting.
Does anyone know of a fix? Apparently re-inputting the Product Key (and reactivating Windows) might help solve but I don't have a Product Key for Windows 8...will Lenovo supply that?
Solved!
Go to Solution.

Hi dsmall2112,
I think you answered your own question again. The upgrade from Win 8 basic will only go to 8.1 basic. The key you have will only work on the Win. 8 basic and the upgrade to 8.1 will still only give you 8.1 basic, with that key.
In order to get Win 8.1 Pro features, you will have to buy a Win 8.1 Pro key.
Regards,
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have an Ipad2, an Iphone 4 . I want to be able to sync both of these with my Windows desktop and Outlook 2007. I would like to sync to and from the Idevices and Outlook.

I have an Ipad2, an Iphone 4 . I want to be able to sync both of these with my Windows desktop and Outlook 2007. I would like to sync to and from the Idevices and Outlook. When I attempt to sync in itunes I get a popup message asking if I want to delete, Merge or cancel. Not wanting to delete of cancel the only option left is Merge.
When selecting Merge all of the entries in outlook are added to the idevice. The next time I merge all of the same entries plus any new ones are added, resulting in older entries being repeated i.e an entry like “John’s Birthday” will appear 5 or 6 times on the same date.
How do I resolve this issue? How do I get the the sync process to add only new entries?

This is a great question. First, facetime will not work because it has to establish a Call connection first. iMessage should work, but how to get it going I am not sure. Two great Apps to try are, Viber and Skype. Viber is excellent, it works over WiFi, you can make free calls and free text messages all over the world with other users who have Viber installed. It does not even have to be open on screen to work. Viber does have to recieve one text message with activation code, to activate it, this will be your only hurdle, but maybe Verizon can help you get that one text message. Skype does have to be open on screen however, but this can function like Facetime with WiFi connection. Definitely get Viber free in App Store, and put it on all your iDevices so the old Verizon iPhone can function as a telephone when on WiFi.

I want to buy a iPad2 to go along with my mac desktop and iPhone, do I have to purchase the same apps. to put on my iPad

i want to buy a iPad2 to go along with my mac desktop and iPhone, do I have to repurchase the same apps. to put on my iPad?

You can use most of the apps that you bought for your iPhone on the iPad as well. Sometimes the apps are not optimized for the iPad's larger display. Sometimes the apps are limited to the iPhone and you must purchase a separate iPad version. As with your iPhone, Mac apps cannot be used on an iOS device.

Using Leopard with iCal, Apple Remote Desktop, and Quicktime/Keynote

Hi,
I need to create the following 'synergy' or workflow or 'automation' between these softwares:
- iCal
- Apple Remote Desktop
- Quicktime/Keynote
This is the application:
Remotely controlling (ARD) and scheduling (iCal) several quicktime/keynote files for display (ie. playing full screen video but controlling which file is playing from home).
How can I integrate all softwares?
Extended application:
I would also like to know if Leopard or any Apple software has the capability to read serial (RS-232) commands. For example, I would like to know and/or be advised if a screen/monitor is turned off (regardless if the computer is properly displaying the content or not).
I look forward to your feedback.
Thanks,
LMB1980

It is if you are trying to stream it.
Users may want to stream their music into a third party program such as Ventrilo (as I do) to share their music (but not their libraries) with other listeners and speak on Ventrilo at the same time. You need two user profiles running Ventrilo at the same time, and two user profiles running iTunes.
When I roll over to User Profile #2 after setting up iTunes to stream into Vent in User Profile #1, iTunes stops playing. This is a recent change. It's annoying.
How do I change it?

Problem with remote desktop and lock screen

I know of the easy way to immediately lock a Mac's screen by clicking the menu bar lock icon from KeychainAccess. This works on every system under my control (rMBP running Mavericks, MacMini with 10.5 and Mavericks). However when I control the Macs via Remote Desktop (currently 3.7.2), that lock icon behaviour changes.
Trying to lock a 10.5 system, the screen inside the Remote Desktop window goes black immediately. Moving the mouse activates the password dialog. That is what I want. Doing the same in a remote Mavericks system, the screen goes to a dark blackish semi-transparent state. Moving the mouse immediately restores the normal desktop view, no password asked. Is this a feature or a bug in Remote Desktop? This change in behaviour must have come in around Lion or Mountain Lion.
---markus---

Hi
Do you use the Intel Proset Utility to configurate the WLan connection?
Try to configure the WLan using this tool and check if the Wlan would disconnect again.
Im also interesting what Wlan driver did you use?
Did you use one from the Intel page?
If not, check the Intel page for the newest WLan driver version.

Confilicts with XP "Remote Desktop" and ZFD4 "Remote Control"

Similar Messages

Maybe you are looking for