Confirm a bug: preview file generation when save the project

Hi, please could you confirm this bug?
Windows 8.1, Premiere CC 7.2.2
Concise problem statement: Premiere CC generates new preview of all files in Media Browser each time that the project is saved.
Steps to reproduce bug:
1. Create an empty project
2. Open a directory with video files in Media Browser. Preview are generated
3. Save the project (ctrl+s)
Results: ALL preview files are generated again
Expected results: preview files should not be generated again
This does not happen with auto save (preview files are not generated again).
It is really frustrating when we have a lot of videos in the same directory.
Can you replicate this bug?
Thank you

Hi Jim,
thank you for your test.
I'm saving an empty project just for test. However, the same happens even if the project is not empty.
So It is not OS / version problem. What could it be? What could I try?
It is a real performance problem for me.
Thank you

Similar Messages

  • I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash.  When I save the project, the file size is 20Gb.  How can I save just the 33 sec clip?

    I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash.  When I save the project, the file size is 20Gb.  How can I save just the 33 sec clip?

    Non-destructive editing is an important feature of iMovie HD 6.
    iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
    So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
    One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
    Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

  • I'm editing in FCS 5.1, but when I try to save the project, it says "File error: file unknown."  Any advice?  Thanks!

    I'm editing in FCS 5.1, but when I try to save the project, it says "File error: file unknown."  Any advice?  Thanks!

    have you tried doing a save as to a different location?  If that doesn't work, do a search here.  I seem to remember people having the same problem.
    You could also try doing an xml export (I think 5.1 has that capability). 

  • On saving mail as .rtfd file does not save the attachments.

    For a few updates to Leopard now I have had a problem with Mail. If I opt to save with attachments the file is saved as a .rtfd file but when I open the said file in Text Edit there are no photos or whatever the attachment was. I have been saving this way for years and only in the last year or so has this problem arisen. I don't want to save the files as .eml files (which DO save the attachments). Anyone else noticed this problem?

    Dear Glyn
    you posted this bug Oct 19; it still has not been fixed, Is there any way to push Apple people to stop behaving like windows people ?
    I much regret I installed the new systemsoftware ...
    What can we do to FIX it - i need the feature and it has a button to include the attachment, so it should work
    grrr

  • I ordered cards 1 week ago through iPhoto and I have not yet received a shipping confirmation.  How do I know when/if the cards will be processed and shipped? Thank you.

    I ordered cards 1 week ago through iPhoto and I have not yet received a shipping confirmation.  How do I know when/if the cards will be processed and shipped? Thank you.

    go to the online apple store (store.apple.com) and check your account for order status
    LN

  • TS5179 I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update (PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it. #out of space...??)

    I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update, 11.4.62 (on a PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it (Ugh).  First result Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there.  Second result, upon installing iCloud again, I have two iCloud contact files shown in outlook - "iCloud" & iCloud, within iCloud".  1,332 & 1,385 contacts respectively. 
    Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere.  This is NOT fun at 72-yrs old...!!
    So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ

    Interesting response, Kappy  -  Back to original post: "First result: Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there (therefore, initially I had lost my contact file from Outlook).  Second result, upon installing iCloud again, I now have two iCloud contact files shown in Outlook - "iCloud" & iCloud, within iCloud".  W/ 1,332 & 1,385 contacts respectively.  
    Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere.  This is NOT fun at 72-yrs old...!!
    So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ"
    You can safely assume that I have tried using it!   So, to make things a little clearer:
         1)  I now have two iCloud "contacts files", w/ a different total count. What's the difference?  Why the different toatl count?
         2)  Since re-installing the Apple software (part of the MSVCR" recovery instructions) "couldn't possible affected Outlook", why am I getting an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere.  What's in those files? And where are they?
    Probably more important questions get down to:
         3)  Why is a basic Apple product upgrade "screwing-up Outlook"?  This iTunes upgrade, failing to install properly forced Outlook 2007 into a 2-min start-up cycle.  Which was fixed with this "Goat-Rpdeo" of re-installing MSVCR80.dll.
         4)  And under the latest release of iOS-7.0.4 on our iPhones, why is Apple now forcing us to use the iCloud to back-up our contacts, calendars & tasks, vs. allowing these files to be backed-up directly on our PC's via the USB cable?
    Thanks again for your interest and comments.  - Russ-AZ

  • Video files in Captivate 6 externalize when publishing the project. Is there any way to publish an S

    Video files in Captivate 6 externalize when publishing the project. Is there any way to publish an SWF project with the video files all in one single file?

    Rhonda, I used Captivate 6. Create a New Project. Set the project size to the size of  your MP4. In my experience, this was 640 v 480 which also happened to fit nicely within my final project.
    From the menu, select Video > Insert Video. Choose "Multi-slide Synchronized" and point to the MP4 on your local drive. Select a skin and playbar that you like from Project > Skin Editor. Then publish. In the Publish dialog, choose SWF as your output format option (not HTML5).
    This is the SWF that I added to my master project through Insert > Animation.
    Hope this helps!

  • The package file is missing from the project directory

    Today after working in SSIS all day with no problems, I re-opened one of my projects and got the message:
    The package file ‘package_name.dtsx’ is missing from the project directory. This package has been skipped, and project will continue to load.
    So two of my packages loaded and all remaining packages where skipped, one pop-up dialog for each “missing” package. I then looked in my project directory and all my packages are still there.
    1. Has anyone experienced this and found why this happens?
    2. Can I just import my packages again and be good to go?
    Update:
    I discovered that this had to do with renaming my packages in SSDT. For some reason the name changes did not get saved into the project .dtproj file. I was able to correct by renaming the .dtsx files in the project directory to their original name. Then
    I re-opened the project, renamed the packages to the new names, saved and closed all packages. At this point you need to save the project, which actually wasn't really straight forward. You need to highlight the project name in Solution Explorer
    and then from the File menu select 'Save Selected Items'. This updates the .dtproj file.
    Upon closing SSDT, a dialog SOMETIMES appears asking you to save the project, after selecting Yes, the .dtproj file also updates. However, I've realized that upon closing the project, that the dialog asking to save the project does not always appear,
    depending on what has changed in the project. To be safe, use method previously described, especially after renaming packages. Also, if SSDT happens to crash after you have renamed a package, the project will not re-open properly.

    I remember one such occurrence when I used Source Control (if I recall right it was TFS), and yes, you can simply right-click on the packages folder and choose 'add existing package'.
    But check for project file perhaps it has a wrong reference. E.g. something from the outside manipulated on the package files.
    Arthur
    MyBlog
    Twitter

  • Not able to save the project

    hi,
    When i am trying to save the project, not able to do it.please help me to solve this issue.
    I am getting following error.
    preference.properties
    (Acess denied)
    Preference.properties (Access is denied)
    java.io.FileNotFoundException: Preference.properties (Access is denied)
         at java.io.FileOutputStream.open(Native Method)
         at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
         at java.io.FileOutputStream.<init>(FileOutputStream.java:70)
         at oracle.wh.service.sdk.OWBPreferences.saveToClientStorage(OWBPreferences.java:367)
         at oracle.wh.ui.console.WorkBenchController.doRealcommit(WorkBenchController.java:1155)
         at oracle.wh.ui.console.commands.CommitCmd.performAction(CommitCmd.java:24)
         at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Thanks
    dadivela

    Hi
    Carsten Herbe is right you do not have read and write permission on the file.
    either login by Administrator or ask Administator to give Read and write permission onthe same filePreference.properties
    or
    better to take Read and write permission on %OWB_HOME folder

  • After Effects CC: how to retain Camera Raw's settings when opening the project from a different drive

    I want to open a project from a drive which is different than the original one, but which has exactly the same folder structure and files as the original drive. When opening the project, all files appear as missing because the drive is different. When I replace these missing files for the ones in the new drive, After Affects relinks all media. However, the camera-raw settings that were embedded in such files are lost: After Effects opens the files as no previous camera-raw correction had been done. Is there a way to avoid this?

    What could be in my project that makes it unable to open?

  • PE4 Saving My Presets effects when saving the project

    I have created custom effects and saved them in 2 folders within My Presets Effects. I also exported the 2 folders in one ".prfpset" file. After I save the project and exit premiere, and reopen the project, My Presets effects are not present. I have to import the saved ".prfpset" file everytime. Is there a way to keep the My Presets effects as part of the project and/or premiere (just like the standard effects)????

    Steve,
    Thanks for your reply. Unforturnately the effects are not available in My Presets folder in any project that I open or create. So I have to import the exported ".prfpset" everytime. From what you are saying, the My Presets folder automatically becomes part of Premiere (and not only a project). Looks like I have a defect in Premiere or did something to unset an option to save.
    Roy

  • HT6114 Can't save downloads to existing files??  In the "save as" box I use the little "search" window to locate where I want to put a new file but when found the location file does not operate.  And dropdown menu says "save to online acct"

    When I try to save an emailed-to-me document to an existing file on my hard drive by using the little "search" window the recipient file is inactive and does not open to recieve the document I want to save (nothing happens when I click on it and it's a subdued color).
    If I click through my files manually by starting on the desktop and working my way to the location of the recipient file I can save.
    This takes a lot of time and is DRIVING ME CRAZY!
    Please tell me I've just missed something obvious that can be fixed in a jiffy!?

    OMG!!  It also happens when I try to open a file from inside a program like Adobe Reader.  If I use the little corner search window all the files are inoperable.

  • Dynamic file naming when downlaoding the file to target directory

    Dear friend,
    My requirement is in the Adapter type File, File Name has to be dynamically generated. (i.e., each time the file name will be different according to the input name from the IDoc field). Can someone help me in this regard ???
    Thanks in advance,
    Jose Augastine

    Hi,
    The dynamic filename generation concept is as follows.
    In your filename field. just give a variable with % symbols. (eg: %file% ).
    Now, under the option Variable Name Substitution, you can give how the value has to be created.
    It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
    For the former, your give
    message:interface_name ,etc
    and for the payload part you give,
    Payload: "your element root which u wanna acecss"
    Just check this link out,
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    And read the contents under variable substitution and it will help you understand the concepts better.
    If you have any clarifications, do get back,
    Regards,
    Bhavesh

  • On Firefox, i wish to edit details in the 'Page Source' file (CSS) and save the changes. Please help...

    I am viewing a crossword(HTML file) prepared by me, on FIREFOX. I wish to change the color of the blank squares (which are black now), to improve the appearance of CW. I have located the appropriate place on the "Page Source" file for effecting the change. ''But, I am not able to effect the change, as the file does not accept the editing.'' Please, advise
    how I can effect the change and also save the changes effected...Thanks

    It is View > Page Source and not Edit > Source, so you can't make changes to the source in Firefox.<br />
    You will have to do that via an external editor.<br />
    You can also override CS style rules with the Stylish extension.
    * https://addons.mozilla.org/firefox/addon/2108 - Stylish

  • Error when save the query

    Hi All,
    We have migrated from 3.x to 7.0 (QA). In BEx analyzer when we save the new query the following error message getting.
    1. Program GP77SAI0MJZN9QMLKWR6SIGCYYA does not exist
    2.  An exception with the type CX_SY_PROGRAM_NOT_FOUND occurred, but was neither handled locally, nor declared in a RAISING clause
    3. Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
    Please help me from this error.
    Thanks in Advance
    Ravi

    Hi,
    Check following thread and underlying note..
    error when saving a query "CX_SY_PROGRAM_NOT_FOUND"
    Abhijeet
    Reward pts if useful..

Maybe you are looking for