Confirm Inbound and Outbound Delivery, with HU packing

Hi Expert,
Does anybody know some FM(s) for comfirm Inbound or Ountbound delivery with Batch split and Handling unit packing?

This is not an appropriate message for the Web Dynpro ABAP forum. Please choose the correct forum when posting questions.

Similar Messages

  • Single Function module to create inbound and outbound delivery

    Dear Frens,
       I would like to know how VL10A is creating a deliverty document in background mode.
       otherwise can anyone help me with a single function module or BAPI or BADI which creates both
       inbound and outbound delivery.
    Regards
    Priya

    Hi,
    Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
    For creating a delivery wrt PO u 1st need to have a sales order i guess.
    Regards,
    Amit

  • How to add Total Quantity in Inbound and Outbound Delivery screen

    Hi,
    I want to add Total quantity field in Inbound and Outbound Delivery screens.
    In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
    in Change Layout--> Display, i didn't see any totals displayed.
    Please help me on this?
    Regards
    Bhuvana

    Hi
    If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
    Regards
    Eduardo

  • Delivery document Type of Inbound and Outbound delivery

    Hi,
    Please suggest standard delivery type for inbound and outbound deliveries.
    Regards,
    shreya

    Hi,
    Standard delivery types:
    inbound delivery EL
    outbound deliveries LF
    subcontracting LB
    project LP
    replenishment NL
    returns RE
    without ref LO
    Regards,
    MdZ

  • Sharing Handling Units between Inbound and Outbound Delveries?

    Hello-
    I could use some guidance with how to best setup a handling unit scenario for a Third Party Purchasing process.
    1.) Sales Order for Third Party Purchased Material (Vended Finished Good) is created in ECC.
    2.) Purchase Order is sent to supplier.
    3.) Shipping Label is generated in SAP and is assigned a Handling Unit.  Label is sent to supplier.
    4.) Supplier affixes this label to product and ships it to our warehouse.
    5.) Goods Receipt is performed via Purchase Order (MIGO). 
    6.) Warehousing activities and Post Goods Issue of Outbound Delivery are performed via this label and Handling Unit.
    We would like to do a few new things with this process.
    A.) We would like to have the supplier provide us with the HU on their ASNs and generate a Packed Inbound Delivery from it. 
    B.) We would like the same HU to eventually be associated with the Outbound Delivery to the end customer. 
    Is their a best practice to share a Handling Unit across an Inbound and Outbound Delivery? 
    Is EWM Cross Docking the best way to accomplish this? 
    Are there other proven approaches?
    Thanks for your time and help.
    -Ron

    hi friend
    Handling unit number for identity of packing materail , pallet material carrying the carton ,carton the carrying the  material
    like FG  material and tray
    identification number controlling the handling unit numbers.
    with regards
    dinesh

  • SAP inbound and outbound delivey in single shipment document

    Hi
    We are doing outbound and inbound delivery creation in SAP. These are dropped to OTM(oracle transport management system). OTM will create orders for deliveries and groups multiple deliveries into one shipment. This is sent back to SAP for shipment creation. Problem we have is SAP can have either inbound deliveries Or outbound deliveires in a shipment. Based on inbound shipment or outbound shipment in shipment document type. OTM does not has this restriction and can bundle both outbound and inound in single shipment.
    Business scenario we have is multi pick and multi drop, where there is possibility that 1) inbound del from vendor for PO            2) Outbound del to customer for SO and 3) outbound/inbound del for STO from RDC to DC in a single sipment.
    Please advice ow this can be achieved in SAP.
    Best Regards
    Edited by: M.N. Phani Sai on Oct 28, 2010 10:34 AM

    It is not possible to involve both inbound and outbound deliveries in the same shipment. SAP has its deficiencies...
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/inbound-and-outbound-delivery-in-the-same-shipment-3512217
    http://help.sap.com/saphelp_erp60/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
    You cannot place outbound deliveries and inbound deliveries together in the same shipment document. Nor is it possible to assign Items from a delivery or an inbound delivery to different shipment documents. You must decide at the delivery stage whether order items can be shipped together in one delivery and therefore require only one shipment.
    Edited by: Csaba Szommer on Oct 28, 2010 11:05 AM

  • IDOC Inbound and Outbound

    Please let me know How to handle IDOC inbound and Outbound preferably with example. I am new to it.

    hi,
    your question is very broad,
    start reading continue from there...
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/19/3cf334c20ccc52e10000009b38f83b/frameset.htm">Doc Interface: EDI Application Scenarios (BC-SRV-EDI)</a>
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/dc/6b8a4943d711d1893e0000e8323c4f/frameset.htm">IDoc Interface / Electronic Data Interchange (BC-SRV-EDI)</a>
    An example:
    inter company invoiceing:
    the SD invoice has an output type (INVOICE01) that sends an Idoc that creates the mm invoice (invoice verification)
    for more data see the links above
    good luck

  • Radio Frequency-confirmation OT on an outbound delivery with HU

    Hello Every Body,
    I have a problem using standard transaction for the Radio Frequency.
    I explain my problem.
    I would like to make a Good Issue with an outbound delivery by RF.
    I create my outbound delivery with transaction MB1A.
    And then I want to do the following steps with RF transaction LM61:
    Creation OT - Confirmation OT - Good issue.
    These steps are ok exepted the case partial consommation on a HU (which is on HU).
    For example:
    I have HU1 (palet) with 2 HU: HU2 and HU3 (bag) and I need only HU2.
    In this case I have a problem for the TO confirmation.
    Because I don't find where 'saying' I take this HU of this HU.
    Thanks by advance for your help!

    Hello Stephen,
    The issue here is that in the case of delivery created automaticaly via transaction MB1B the HU need to be precised at the moment of picking. However the company would like it to be working like in case of picking for a normal outbound delivery created in reference to a sales order (delivery type YLF) - while picking only a "technical" HU is taken and the righ HU are pricised by a user at the moment of picking confirmation. 
    Could you please propose any solution for that?
    Regds
    Sumana

  • Packing handling units to outbound delivery with batch management

    Hello all,
    I am packing an outbound delivery with a material that has batch management active. The packing is from a storage location that manages handling units (HU-managed sloc).
    My problem is u2013 before entering the HUs to the delivery u2013 the system asks me to enter the batches (in the batch split function). Only then I am allowed to enter the HUs in the packing function.
    What could be the reason for this preliminary batch entries ?
    How can I set the system not to do that, i.e., I would like to be able to enter the HUs directly without entering the batchs separately.
    Thanks,
    Isaac

    Dear Isaac,
    this system behaviour can not be changed in standard and is also not recommended to change it via a modification. The reason for this system behaviour is to avoid inconsistencies in the system. The HU that you assign to the delivery, should exactly fit to the delivery. In case if the material is batch managed, you should specify the batch first, and then add the fitting HU with exactly that batch.
    I suppose you checked the longtext for HUDIALOG102, that you get in the described case, but I copy it for you, in case if you did not read it:
    "Diagnosis
    There are items to be handled in batches which have not yet been
    assigned to a batch.
    Batches must be recognized for items with HU-managed storage location
    For items at a storage location that is not HU-managed, the item type
    determines if packing will take place at cumulated item quantity level
    (meaning that the batch is not recognized at any point in the handling
    unit) or if packing must take place at batch level.
    System Response
    If an item requires batch identification, that item will not be
    suggested for packing as long as the batch is not recognized.
    Procedure
    Go to the maintenance of the delivery item and assign at least one batch
    to the item."
    Regards,
    Ely

  • Outbound delivery with Inbound IDOC DELVRY06 with Message type SHPCON

    Hi Friends
    I am trying to pack outbound delivery with Inbound IDOC DELVRY06 with Message type SHPCON.
    But IDOC has error Specification of destination HU missing.
    Could you please help us to resolve the issue to Pack the outbound delivery with the  IDOC.
    Thanks
    SR

    HI Ian Kehoe
    Sorry for delay in reply
    Thanks you very much
    I solved that problem .
    Could you please advice  test data for IDOC  DELVRY06 packing hierarchy (multi level packing) to pack SAP outbound delivery.
    Thanks
    Ravi

  • Seeking recommendations for handling large binary documents with security(preferable) for inbound and outbound scenarios from OSB- SOA and SOA- OSB

    Hi,
    I am currently working on a project with the following requirements
    1. Client transfers binary document (between 1-20MB in size) from OSB proxy to SOA composite to Content Management system
    2. Client retrieves binary document (between 1-20MB in size) from Content Management system to SOA composite to OSB proxy
    In otherwords, a inbound and outbound integration.
    What I have tried so far and my results:
    Scenario A
    1. Enabled MTOM on SOA composite by attaching wsmtom policy
    2. Created an OSB business service and consumed the SOA composite application
    3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
    Scenario B
    1. Enabled MTOM and security on SOA composite by attaching wsmtom policy and SAML policy
    2. Created an OSB business service and consumed the SOA composite application
    3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
    I have a demo integration setup that writes a binary document to a file using the above steps. My SOA composite has a file adapter that writes the binary data to an external file and it is exposed as a web service with a simple WSDL definition that has an inline XSD schema with an single element of base64binary type. I have added a mediator that maps this base64binary element node to the file adapter's input node.
    Result for Scenario A with file size less than 1 MB:
    Flawless execution with sub-second response times
    Result for Scenario A with file size of 8MB
    First attempt: SOA composite faults with database transaction related error, solved by increasing JTA timeout
    Second attempt: Flawless execution, but file transfer took over 100 seconds to complete. This is very poor performance and my suspicions are that this cannot be the expected behaviour, but I dont know the internal workings of the SOA composite and why its taking this long.
    Result for Scenario B:
    The OSB business service does not accept/recognize the SAML policy in the WSDL and suggests to configure OWSM policies manually, but OWSM policy in OSB does not have the wsmtom policy. Regardless of this, any permutation of MTOM + WSS security in this integration scenario either did not work outright or MTOM optimization was not happening ie binary data was materalizing in the message body.
    I have only about 3 weeks left to implement a viable solution and the closest ive come to a solution is Scenario A but that +100 second response time for an 8MB file is really worrying.
    I would appreciate any level of guidance, recommendations or suggestions as to how I go about tackling this problem.
    Thanks
    regards,
    Johnny

    I think this is due to the underlying mechanism of weblogic classloading..
    You can contact oracle support @ https://support.oracle.com to report issues. Roughly this is the process .
    1- get the Oracle Customer Support Identifier (CSI) for the client you are working for.
    2- Create a user profile quoting the CSI. This will send an approval request to oracle support admins at your client.
    3- Get the oracle support admins at your client site to approve your request for support access.
    4-Once they approve , you can access the support site and raise service requests.

  • Inbound Delivery Shipping Unit and Outbound Delivery Shipping Unit Mismatch

    Hi All,
    At the time of creating the outbound delivery, I am getting the error"Inbound Delivery Shipping Unit and Outbound Delivery Shipping Unit Mismatch".
    Please help me to resolve the above error.
    Please let me know the cause for the above error.
    Regards,

    Hai Shafi,
    PLease check these threads,
    http://help.sap.com/saphelp_40b/helpdata/pt/a4/613275e24bd111950d0060b03c6b76/content.htm
    http://help.sap.com/saphelp_46b/helpdata/en/ac/f6fe78931a11d184d10000e81ddea0/content.htm
    http://education.feedfury.com/content/18638791-processing-shipping-units-in-sap-sd.html
    And hope you are using the same material received in inbound for outbound also.
    If material is different please check UNIT in Material master for both materials.
    Regards,
    Mani

  • Open production orders and outbound delivery after go-live

    Hello All,
    I tried to search answer for this question but could not find answer.
    Could anybody suggest, what to do with open production orders and outbound delivery after go-live when WM is activated. As, after go-live WM-PP interface will be activated and system should consume material from storage bin specified in control cycle and that will happen for newly created production order after go-live,but what about existing production orders how to update production supply area against work center in production order.
    Similarly with outbound delivery how to update WM status after go-live.
    Thanks in advance

    Thanks to both Jurgen and Sander
    Regarding production order yes, one way is to re-read PP master data in production orders, but is that the only way to handle this or do we have any other option?
    I was aware of re-read PP master data but it will real time consuming and also if it will problematic for already released or partially confirmed production orders.

  • Problem in Outbound delivery with order reference

    Hi,
    I am facing problem with creation of outbound delivery with order reference from transaction VL01N. When i enter into the transaction with order key in, but in the tab Picking there is one column Pick quantity which is showing as grey field with zero value(Grey field don't allow to change the quantity). This Pick quantity is always allow to put us required quantity but i come across this kind of scenario very first time. Can you please help.
    Thank you.

    Hi,
    Your combination of Plant+Storage location is enabled for warehouse management. So directly putting the picking value is not possible. You have two options now.
    1. If you know howto put pickign through transfer orders, do it through LT03 and confirm teh TO for picking quantity to be updated in delivery. You have to find out teh stock in the source bin and use it in transfer order. You may get in touch with WM consultant, if you dont know how to do it.
    2. If you are ok with just doing picking without WM, then you can change the storage location in delivery and then try picking in delivery itself. The storage location should not be enabled for WM for the plant.

  • Need IDOC inbound and outbound programs

    hi,
    i am new to xi.
    i want IDOCs , inbound and outbound / function module  programs for    PURCHASE ORDER
    and GOODS RECEIPT.
    ex:  BD10 for material master (matmas01).
    thanks and regards
    v ijender

    for purchase order.
    ORDERS / ORDERS04
    ORDCHG / ORDERS04
    ORDRSP / ORDERS04
    Programs
    RBDMIDOC – Creating IDoc Type from Change Pointers
    RSEOUT00 – Process all selected IDocs (EDI)
    RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
    RSARFCEX - Execute Calls Not Yet Executed
    RBDMOIND - Status Conversion with Successful tRFC Execution
    RBDMANIN - Start error handling for non-posted IDocs
    RBDSTATE - Send Audit Confirmations
    FOr testing you can use WE19.
    and also check the below link
    http://www.erpgenie.com/sapedi/message_types_masterdata.htm
    regards
    kummari

Maybe you are looking for