Confirm TO for HU's fails.

We created a Sales Order for client AAA for material M 20 pieces.
With reference to this Sales Order, we created a Production Order.
We produce 20 pieces and pack them in 4 HU's of 5 each.
For these HU's we created and confirmed Transfer Orders into the warehouse over a HU managed Storage Location, giving us 4 SU numbers. When we create the delivery and consequently the TO, the system finds the correct SU's.
Only when we want to confirm the TO, we get an error message:
No stocks from HU storage locations can be managed on SU number
Can anyone shed a light on this?
TIA and regards,
Frank Jonker

Hi Frank,
Please check this page (second half of it):
http://help.sap.com/saphelp_47x200/helpdata/en/2d/584bc5a70f11d2b44e006094b9b9dd/frameset.htm
Are all settings OK for the related storage types?
BR
Csaba

Similar Messages

Posting period issue while deleting a confirmation posted for a limit PO

Hi ..
I am facing an issue whiel deleting a confirmation posted for a limit PO.
Confirmation was posted for a limit PO in SRM and it created a service entry sheet in SAP. If I deleted that confirmation in the same posting period, then it is getting deleted. No issue here.
But if I deleted that confirmation in the next posting period then the reversal document is going to error in process. RZ20 is showing the error "Positng only possible in periods 2012/2 and 2012/3".
Posting date of reversal document is current date only and the backend posting period is 2012/3, but still it is failing with this posting period error.
If I tried to delete a confirmation posted for a normal PO then I could able to delete it even in next posting period by just changing the posting date.
Why this posting occurs while deleting the limit confirmation, even through the posting date is falls within the backenn posting periiod? Is it like, SAP system is trying to delete the service entry sheet in original posting period? Kindly help.
I am in SRM 5.0 (server 5.5) SP12.
Thanks,
Arun

OK.
Well, if the variable is not used in any interval selection, then I would say "something happened to it".
I would make a copy of the query and run it to check if I get the same problem with period 12.
   -> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
If so, then try removing the variable completely from the query and hardcode restriction to 12.
   -> If problem still persists, I would have to do some thinking.
If problem is gone, then add the variable again. Check.
   -> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
Good luck!
Jacob
P.S: what fisc year variant are you using?
Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed. The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanks

Hello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling

Initialization of encryption for the session failed.

Everytime I try to remote control into a machine that has the adaptive agent installed I get an error that states "Initialization of encryption for the session failed. Unable to proceed." I have tried to remote into both Windows XP and 7 machines with no luck. I have confirmed that the zcm certificate is a trusted certificate with the client. The server time and the client times are also in sync. Any thoughts??

Try This.........
Change AllowedTimeDiff from 10 to 120 in serverstats.xml.
Then restart your services.
This was changed from 10 to 120 in ZCM 10.3.0
I just found out it was changed back to 10 in ZCM 11, not sure why.
It's really hard to spot a 10 second TimeSynch diff.
Might be something else, but this could be it.
On 4/18/2011 1:06 PM, rhedgecorth wrote:
>
> Everytime I try to remote control into a machine that has the adaptive
> agent installed I get an error that states "Initialization of encryption
> for the session failed. Unable to proceed." I have tried to remote
> into both Windows XP and 7 machines with no luck. I have confirmed that
> the zcm certificate is a trusted certificate with the client. The
> server time and the client times are also in sync. Any thoughts??
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account "iCloud" failed." Been to Apple - no luck. Ideas?

I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account “iCloud” failed." Been to Apple Store - no luck instore, or with Super genius over the phone when with genius in store, taking data in real time via ethernet!
I had to do a full wipe of my system because of time machine back up issues 2 weeks ago, and the error has only occured at some point since then. I only did a drag and drop of my user account folders/files into an External HDD rather than a copy of my user account (advised by the staff in store at Apple to do this) and when reimported, the Mail folders are all present but each message is in a sub-sub-sub folder that is numerically named. I do not have a mirror image of the hard disk prior to the wipe, only a time machine back up from 2 weeks prior to it being done. I am uncertain if this reinstall has caused the issue.
I am not happy to upgrade the software in my iPhone until I have the calendars working. I have purchased Mountain Lion, but again am concerned about upgrading until the issues are sorted.
I have tried the other solutions on here with no luck. HELP please.
Many Thanks.

Progress Update.
I made a back of what existing phtos and Videos I had on my Iplhone. I used Image capture to do this making an entire back up of photos and videoa that were still intact on the phone.
Image capture is god for this purpose, as it does exactly what you ask it to do without applying any rules or squishing the files back into iphote (which might also be corupted)
Image capture wil do the basic function of retriving the contents of the phone and save them as native files on your hard drive.
Once I did this I erased my iphone, and re intitialised it restoring an older back up from icloud.
As the retore was happneing - I did retreive the missing files that cuased the intial beviour as above, and I could play the videos that were missing in the above scenerio. The wierd ting was however that even though the source files were now back on the device, the thumbnail previews were missing. Where I ahd balck thumb nails for server portions of the resotred content.
I then went to bed as the restore is a long process. When I woke up the library had library had cleaned itself up. Mysteriously the prcess had deleted the files missing the their thumbnails.
This is very perculiar and bad behavior.
I am now repeating the process, and will attempt to download the missing content as it is restored and prior to the phone trying to fix itself.
Here are the lessons learned.
DO NOT rely on Photo Stream to keep back ups and synchornise videos from you IOS device. IT DOES NOT SUPPORT THIS CAPBILITY
DO NOT rely on iCloud Back Up alone - always fd an occassional iTunes back up or more reliably still always take a back up of photos and video files using Image Capture to be doubly sure that you a have backd up any content.
DO THIS NOW - dont wait to loose your phone ofr have your phone repaired by replacement at the apple Store. (I did both :-(

Confirmed Quantity for Item in sales order

Dear All,
In one sales order there is confirmation block (this is through the delivery block in the sales order header level).
The sales order contains BOM (header and it's sub items) and some standard items also two third party items.
When the sales order is saved there are no confirmed quantity for any of the item except the BOM header.
May I know what could be the reason to have this BOM header confirmed quantity..??? this is leading to a problem in the data from sales order.
Is there any customizing related to this item (item category or schedule line category) to look out for..??
Thanks & Regards,
Vishi...

hello, friend.
your issue is quite broad. outcome depends on -
1. configuration of delivery block (which, in your case, we can assume to include confirmation block)
2. selection of availability check and MRP type in material master
3. schedule line category and schedule line determination
now in standard, if the order line item category is TAN, and MRP type is PD and availability check is PD... the system might temporarily confirm the item even when putting a delivery block at header level, but the system should delete confirmed quantities when you save the order. you can check the confirmed quantities when you open the sales order in change mode... the confirmation should be zero.
however, in third party items (item category TAS), these items are normally confirmed even in change mode. this may hold true if either MRP = none (e.g. ND) and/or if availability check is KP (no check).
nevertheless, regardless of confirmation quantity, the system should not allow creating of delivery while delivery block is in place.
please try these scenarios and post your feedback.
regards.
jy

Creation of secondary indexes for table "RSBATCHCTRL_PAR" failed

Hi ,
We have installed EHP1 on our BI7.0 system successfully, later we are trying to apply SPS01 for this EHP but we got the follwoing error during TBATG conversion.
2 EGT092 Conversion of table "RSBATCHCTRL_PAR" was restarted
2 EGT241 The conversion is continued at step "6"
2 EGT246 Type of conversion: "T" -> "T"
2 EGT240XBegin step "RSBATCHCTRL_PAR-STEP6":
4 EGT281 sql:
4 ED0314 CREATE
4 ED0314 INDEX [RSBATCHCTRL_PAR~DB] ON [RSBATCHCTRL_PAR]
4 ED0314 ( [JOBNAME] ,
4 ED0314 [JOBCOUNT] ,
4 ED0314 [SERVER] ,
4 ED0314 [HOST] ,
4 ED0314 [WP_NO] ,
4 ED0314 [WP_PID] ,
4 ED0314 [PROCESS_TYPE] )
4 ED0314 WITH ( ONLINE=OFF )
4 ED0314 ON [PRIMARY]
2 ED0314 Line 1: Incorrect syntax near '('.
3 EDA093 "DDL time(___1):" ".........6" milliseconds
2EEGT236 The SQL statement was not executed
2EEDI006 Index " " could not be created completely in the database
2EEGT221 Creation of secondary indexes for table "RSBATCHCTRL_PAR" failed
2EEGT239 Error in step "RSBATCHCTRL_PAR-STEP6"
2 EGT253XTotal time for table "RSBATCHCTRL_PAR": "000:00:00"
2EEGT094 Conversion could not be restarted
2 EGT067 Request for "RSBATCHCTRL_PAR" could not be executed
1 ED0327XProcess..................: "ferrari_12"
1 ED0302X=========================================================================
1 ED0314 DD: Execution of Database Operations
1 ED0302 =========================================================================
1 ED0327 Process..................: "ferrari_12"
1 ED0319 Return code..............: "0"
1 ED0314 Phase 001................: < 1 sec. (Preprocessing of TBATG)
1 ED0314 Phase 002................: < 1 sec. (Partitioning)
1 ED0309 Program runtime..........: "< 1 sec."
1 ED0305 Date, time...............: "03.06.2009", "12:47:21"
1 ED0318 Program end==============================================================
1 ETP166 CONVERSION OF DD OBJECTS (TBATG)
1 ETP110 end date and time : "20090603124721"
1 ETP111 exit code : "8"
1 ETP199 ######################################
System properties:
SAP - BI7.0 with EHP1
Database - MSSQL 2000
OS - Windows2003
Please suggest.
Thanks in advance,
Pavan.

> We have installed EHP1 on our BI7.0 system successfully, later we are trying to apply SPS01 for this EHP but we got the follwoing error during TBATG conversion.
> 2 ED0314 Line 1: Incorrect syntax near '('.
> 3 EDA093 "DDL time(___1):" ".........6" milliseconds
> 2EEGT236 The SQL statement was not executed
This is a known problem with SQL Server 2000, see
Note 1180553 - Syntax error 170 during index creation on SQL 2000
I highly suggest upgrading to SQL Server 2005 or 2008.
Markus

Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16

Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
Regards

Script returns the same error.
System databases:
1   1   760   -1   10   1048578   0   1   master       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2   0   12768   -1   10   1048642   0   1   mastlog       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1   1   1024   -1   10   1048578   0   2   tempdev       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2   0   64   -1   10   1048642   0   2   templog       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1   1   288   -1   128   2   0   3   modeldev   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2   0   4464   -1   10   1048642   0   3   modellog   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1   1   28936   -1   10   1048578   0   4   MSDBData   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2   0   3352   268435456   10   1048642   0   4   MSDBLog   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
       SELECT physical_name
       FROM master.sys.master_files
       WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue.

Installation of Updates for Photoshop CS6 failed. Error code U44M1U5 for Camera Raw and U44M1P210 for Adobe Application Manager

The Installtion of updates for Photoshop CS6 failed. Error code for Update of Adobe Application Manager is U44M1P210, for all other features (Adobe Bridge, Photoshop CS6, Camera Raw) U44 M1U5

You go Photoshop CS6 > Help > Updates ...

Bought a new iMac 27" yesterday. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applicati

I bought a new iMac 27" yesterday, running with Mavericks OS. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?

update manually,: http://www.adobe.com/downloads/updates/

My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?

My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?
thanks

for windows you should have an exe and a 7z file. put both in the same directory and double click the exe.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Secure Link for iTunes store failed... Got anything?

Every time I try to open up iTunes store, it wouldn't open. I ran the diagnostics report and it said the ( for first time ) that "Secure link for iTunes store failed". The second time I ran it, just to make sure, said that "secure link for iTunes store is successful. I got confused. So I copied the successful report for you guys to see if there's a problem. **NOTE** I never had or downloaded Norton, or Proxyserver, I even checked to see if it was on the computer. I have Windows Firewall, and Verizon Security, and my computer is a Window's 7. Here's the successful report of the diagnostics so you techies out there could figure what the problem is:
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002) Gateway GM5472 iTunes 10.4.1.10 QuickTime 7.7 FairPlay 1.12.20 Apple Application Support 2.0.1 iPod Updater Library 10.0d2 CD Driver 2.2.0.1 CD Driver DLL 2.1.1.1 Apple Mobile Device 3.4.1.2 Apple Mobile Device Driver 1.57.0.0 Bonjour 3.0.0.2 (333.2) Gracenote SDK 1.9.1.485 Gracenote MusicID 1.9.1.102 Gracenote Submit 1.9.1.133 Gracenote DSP 1.9.1.43 iTunes Serial Number 002AB3A80C24F3E8 Current user is not an administrator. The current local date and time is 2011-09-23 15:44:30. iTunes is not running in safe mode. WebKit accelerated compositing is enabled. HDCP is not supported. Core Media is supported. Video Display Information NVIDIA, NVIDIA GeForce 6150SE nForce 430 **** External Plug-ins Information **** No external plug-ins installed. Genius ID: 65223df73745471fc22c8ff8db2564bf iPodService 10.4.1.10 is currently running. iTunesHelper 10.4.1.10 is currently running. Apple Mobile Device service 3.3.0.0 is currently running. **** Network Connectivity Tests **** Network Adapter Information Adapter Name: {B6520BEA-A816-49F2-892A-F840F59F28D0} Description: Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller IP Address: 192.168.1.2 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.1 DHCP Enabled: Yes DHCP Server: 192.168.1.1 Lease Obtained: Fri Sep 23 13:00:09 2011 Lease Expires: Sat Sep 24 13:00:09 2011 DNS Servers: 192.168.1.1 Active Connection: LAN Connection Connected: Yes Online: Yes Using Modem: No Using LAN: Yes Using Proxy: No SSL 3.0 Support: Enabled TLS 1.0 Support: Disabled Firewall Information Windows Firewall is off. Connection attempt to Apple web site was successful. Connection attempt to browsing iTunes Store was successful. Connection attempt to purchasing from iTunes Store was successful. Connection attempt to iPhone activation server was successful. Connection attempt to firmware update server was successful. Connection attempt to Gracenote server was successful. Last successful iTunes Store access was 2011-09-23 15:36:29. Sooooo, help please? Thanks!

I have the same problem and I'm beyond frustrated. I just want iTunes 10.5 to work properly so I can download iOS 5 to my iPad. I've uninstalled, rebooted, and reinstalled iTunes (and all other apple programs) a dozen times. I've uninstalled Norton since I read that might be causing the block. I've checked my firewall and have done a "flush". I'm out of ideas!!!

Agent determination for step 0000000081 failed error in workflow

Hello All,
I am doing employment verification from ESS portal. In the workflow step I have selected RULE to determine the agent. To configure rule, I double click on rule, on next screen selected "Agent determination - responsibilties" to determine the agent. I configured responsibilties with the valid value ranges and everything but the workflow is going into error! I did research and not sure what I am doing wrong. I checked the workflow container in workflow log and all the values that are supposed to pass to rule container are showing up fine.I keep getting the error:
Agent determination for step 0000000081 failed
Result og agent resolution does not agree with agents of task.
Any feedback you could provide would be greatly appreciated.
Thanks.
Mithun

1. In Transaction PFTC, select Task Type = Standard Task and Task = 01000076
2. display the task details.
3. Now go to Additional data ->Agents Assignment->Maintain
4. Select the task here and click Attributes in the application tool bar.
5. Select the General Task radio button and hit transfer.
-- You have made your task general.
To Synchronise the runtime buffer ,simply excute T-Code SWU_OBUF and hit the Start Synchronization button.

The server responded with an error. The request for account "Yahoo" failed. The server responded with "502" to operation CalDAVAccountRefreshQueueableOperation

The server responded with an error. The request for account "Yahoo" failed. The server responded with "502" to operation CalDAVAccountRefreshQueueableOperation

I am tired of how Yahoo has gotten worse and worse. It is the ONLY account I get problems with DAILY (even after removing and re-adding). AOL will act up once in a while not taking a saved password but accepting it when OK is clicked.... But Yahoo is always responding with such errors.... Today's calendar error is:
The request (CalDAVAccountRefreshQueueableOperation) for account “Yahoo” failed.

Confirm TO for HU's fails.

Similar Messages

Maybe you are looking for