Confirm Upgrading Software for VPN 3060E Concentrator
Maybe I have the steps wrong, but my upgrade didn't work. See below to confirm my instructions to upgrade VPN 3060E concentrator
UPGRADING SOFTWARE.FOR VPN CONCENTRATOR
1. Go to Administration/Software Update/Concentrator
2. You will see the current software revision, below that you will see the current image file.
3. Enter the complete pathname of the new image or click Browse to search for the file. File must be accessible by the workstation you are using to manage the VPN Concentrator.
4. Once you have the pathname of the new image entered, click the upload button.
5. You will see the Software Update Progress window appear.
6. Continue to wait until the update progress window completes and says that update was a success or you can stop the file transfer that is progress by clicking cancel.
7. After the update, the manager returns to the Administration screen where you may see a message that a file upload is in progress. Click the highlighted link to stop it and clear the message. The manager will also verify the new software.
8. A reboot of the concentrator is needed once the update is complete.
9. To reboot the concentrator go to Administration/System Reboot. In the action field select reboot. In the Configuration field, choose to reboot without saving the active configuration. In the When to Reboot/Shutdown section, choose Now.
10. The Software Update Error Screen will appear if there was a problem with the upgrade.
Hi,
Yes, you pretty much summarized what needs to be done in order to upgrade the VPN3000.
So, what is the error that you got while upgrading. Also, when you download the image from cisco.com, make sure that the file size matches.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_administration_guide_chapter09186a00800bd91f.html
Regards,
Arul
Similar Messages
-
Upgrade software for torch 9800
I have BB Torch 9800. I m living india and carrier is Airtel. Can anybody help me to how to upgrade software.
Hello,
The simplest way is to, on a PC (you cannot do this on MAC):
1) Uninstall, from your PC, any BB OS packages
2) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/apps-software/desktop/?lid=us:bboftwareesktopSoftware&lpos=us:bboftware
3) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
4) If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
5) Launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC. If, during the process, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
Don't forget to backup.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Recommended ASA software for VPN ?
Hello -
We’re in the process of migrating our legacy VPN concentrators over to a pair of ASA5540s. The VPN connections we use today are L2L, RA, & easy VPN. I don’t want to jump up to 8.3 or higher just yet, due to the differences in the NAT, group-objects and ACL policies.
Would it be recommended to use an 8.2 code as standard for VPN endpoints?
Thanks -
JohnYou can very well use 8.2 .Right 8.3 onwards changes are there the way we configure NAT but its not very complicated to ignore latest version just because of NAT.
Just have a look on the link-http://www.cisco.com/en/US/docs/security/asa/asa83/release/notes/asarn83.html.
You might miss some new aded features but if not using those then its all right to go for 8.2
Thanks
Ajay -
RADIUS dictionary for VPN 30XX Concentrator.
Where can I find the RADIUS dictionary with the new VSA for a VPN Concentrator sw 4.1.7?
Thanks.
Andrea.Please refer to this document for procedure : http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_user_guide_chapter09186a008007deec.html#41675
-
I think the App Store is great for non-commercial individual users. However, I think it is preventing both OS X and iOS adoption in small business since it is much easier to purchase PC software as either physical media or software deownloads and keys that can be distributed to the employee who needs it.
Does anyone have any experience on purchasing multiple OS X Lion upgrades for a company similar to the following?
150 employees, less than 10 OS X users.
IT manager insists on pruchasing and controlling all software deployed on the corporate network.
Employees are *strongly* discouraged or just plain not allowed to expense purchases.
I understand a single Appled ID can not purchase multiple OS X Lion upgrades to deploy on multiple machines. It seems like the App Store is forcing small business to reimburse each employee for software purchases made through their individual personal Apple ID. What happens when they leave the company? This is a strategy that I think will make IT managers and purchasing managers reject adoption of Max OS X.
The only option that seems to satisfy the above is the physical media option of the OS X Lion USB Thumb Drive which at $69 per commerical user's machine will exceeds twice the cost of the $29.99 upgrade.
Thoughts?
-EdVolume licensing requires +20 users so that does not help a small company with a handful of OS X users.
"Volume license contracts and maintenance agreements are available for all Apple products with a minimum quantity of 20 licenses."
For commercial users, you cannot legally install a single $29.99 upgrade on all machines. Yes, it may be possible but IT managers, even at small business companies, are concerned with what is legal. I think the App Store is a contributor to additional reasons for keeping OS X out of the small business world. It complicates the lives of purchasing and IT managers.
-Ed -
I am trying to upgrade to ICloud and can't download required software because of this Error message "Mac OS X 10.7 requires at least 2 GB of memory" How do I check this or add more memory? I thought I would have plenty of memory??
RAM.
Lion requires at least 2 GB's. -
Trying to upgrade software for my iphone 4 and it is greyed out
i have an iphone 4 and have not been able to upgrade my software to either version 6 or 7. I am still runing version 5. When i go to sofware update to upgrade my software, my "download and install" is greyed out and does not allow me to update. Any suggestions? Thanks
The instructions are in that link. Just follow them VERY CAREFULLY. Especially the part about:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes. [but DON'T connect it to the iPhone yet]
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see the iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen. -
Upgraded software for itunes now my ipod contents are no longer recodnised
downloaded new itunes software now my ipod not on itunes only purchased songs
sorry pal will try to explain a bit better. I DOWNLOADED NEW VERSION OF ITUNES and when i re attatched my ipod the menu page with my music and playlists had gone and had been replaced by a vague version of playlists.when i put in ipod the menu list on top comes up with ON THIS IPOD and when i click on that all my playlists and music screen comes up.I can then play my music and films by clickingon them but it will not let me on to itunes store and when i try to sync ipod nothing happens and it goes back to first screen.It will not let me update ipod with the recently played playlist and i have tried to purchase a tune but it goes into purchased on this rogue first screen. its allmost like my screen is behind the other and its not letting me on to my original screen.
-
How do I get downloads when I don't have my itunes on my computer anymore. My computer crashed so we had it fixed and it wiped my hard drive. So now I don't have itunes.
Depending on which country you are in, then you might be able to re-download the music from iTunes : http://support.apple.com/kb/HT2519 . Otherwise have you not got a backup of your purchases on, for example, an external drive or DVD that you can copy back onto your computer and add into iTunes ?
-
I upgraded software for my MacBook from Snow Leopard to OSX Lion. Now my Office for Mac applications would not work. Can anybody help? Thanks
Aribalto wrote:
I upgraded software for my MacBook from Snow Leopard to OSX Lion. Now my Office for Mac applications would not work. Can anybody help? Thanks
Quite seriously, though, if you wish to use MS Office to it's full potential and if you depend on it on a regular basis, then upgrading to Office 2011 is the only reccommended way to go. You can use the free Apps mentioned, learn to use iWorks (which I love, but others don't) or make your system a shambles and lose your easy to use interface by the other method. Deduct the cost of Parallels from MS Office and it becomes pretty cheap, if that is the only PPC program you wish to use, which is the norm as PPC is long gone from development.
MS Office 2011 is not expensive if it is one of your major work tools. Think of those who had to update their Adobe software!
Anyhow Cheers
Pete -
I can't get search now that i've upgraded software
i can't get search now that i've upgraded software for my n95 does anyone know why and /or what i can do to rectify it?
thanks eebbeeCall your service provider and tell them you updated the phone's software. They will send an service message which has your connection settings and you will prompted to save.
Or you can go to Tools > wizard > Start. It will configure your phone saying defining "operator settings" wait for it to finish
and exit
If my post has helped you please click the white star on the right -
Computer will not communicate with router when i try to install upgrade software
I downloaded the upgrade software for a firmwire upgrade and when I type in the 192.168.1.1 address in my internet browser address bar, I do not get connected with the router so I can do the upgrade. I pushed the reset button on the router after I downloaded the software like the manual instructs. The connection keeps getting interrupted for some reason.
What is the Model no of the router...?
Unplug the modem from the router..Only connect the computer to the router on ethernet port1..Hard-reset the router for 45 seconds,power cycle the router and check the ip address you are getting on the computer.
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1...If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter..If you get 4 replies then,Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Use Internet Explorer to upgrade the firmware. -
Hardware for VPN concentrator 3060E
I have to rack a VPN 3060E but I don't have the backets/ears. Does anyone know where I can purchase the brackets, Cisco resellers tell me that they can't get them from Cisco.
You may try www.dexon.com company, you can get prety much any cisco parts there, if not try a search on ebay.
-
HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.
I suggest you try the very clean and very forceful AutoLoader method:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!
Maybe you are looking for
-
I created an Imovie and shared it with Idvd to burn. I choose a theme and burned the DVD with no troubles. The movie will play in my computer (without showing the theme from Idvd but playing the movie) but will not play in my home DVD player hooked t
-
Java.lang.NullPointerException in end user change password page
Hi All I need to notify a user whenever he changes his password. when i log in to the user page and change password i get java.lang.NullPointerException. Any ideas??? Help is appreciated. Thanks
-
does anybody know if i can create a PEP with a bapi in an exsisting project?, i mean there is a project with some peps, and i want to create a new one in this project and put in the level i decide , can i do that?, what is the bapi? thanks in advance
-
Is the apple time machine is apple machine present in all 2TB WD passport portable drive
Is the apple time machine present in all 2TB WD passport portable drive
-
The speech recognition icon is missing on the message keyboard next to the "space" button. How do I get it back?