Confirmation button is disabled

Hello Gurus,
I have an issue which is very critical in my project now.
The confirmation button is disabled in central confirmation and Purchasing work centers.
In the PO the Goods Receipt is required is Flagged On.
Please give your suggestions.
Regards
Madhan

Hi ,
    If you made any changes to the SRM PO then Please check in BBP_PD transaction for that PO any change version
    document is closed or not.If it is not closed the GR confirmation button will be inactive.
    For PO change version the Document should be closed.
    Reason : 1 .Please check the PO workflow went in Error ( Then Backend transfer will fail and I1080 Status is active still )
                   2. PO change version workflow executed successfully and there might be chance of failing database update task
                        while updating the PO.
   Regards,
Devi

Similar Messages

Confirmation button is disabled Stand alone scenario

Hello ,
We are using SRM 7.00 , Stand alone scenario.
We need to create a confirmation upon a shopping cart that has been procceced to PO with status 'Ordered' .
The button 'Create Confirmation' is disabled .
We implimented ABAP role /SAPPSSRM/EMPLOYEE and Portal role Employee Self Services .
Thanks,
Malki Shacham
MM - SRM consultant

Hi Malki,
Did you get this issue fixed?
We are also facing similar issue in SRM 7.0 Ehp1 stand alone scenario.
The Shopping cart has got successfully converted to P.O and the P.O is in ordered status and the 'Confirmation Required' check box is checked.
In case this issue has been fixed can you let us know the resolution ?
Early response would be highly appreciated.
Regards,
Teja

Why my confirmation button is disabled?

Dear expert,
Please help on this, after I created the PO and send to the supplier in SRM, I can not create the confirmation of the PO.
Thanks very much.
Regards,
Hayashi

Hello Hayashi,
There could be multiple things i would recommend to check;
- Can you please validate BBPGETSTATUS 2 job is executing correctly and updating the status. You can ad-hoc base run the program for particular shopping cart to update the status.
- 2nd point is check in ECC PO --> Line item Confirmation per below screen shot and see if there is anything. If you have Inbound delivery or Rough GR that could be holding you back to perform confirmation. This configuration comes from Vendor master --> Purchase organization section.
Hope this helps.
Thank you
Ritesh

Confirm button disabled for Reporter in Solman 7.1 SP10, Incident managment

Hello,
we are using CRM_UI for Incident managment. When the ticket is in status "Proposed Solution" , Reporter is not able to confirm the ticket, "Confirm" button is disabled. How to enable this button?
Renato

Hello Renato,
Please check authoraziton object b_userstat mentioned at belowed thread:
Reporter not able to confirm the Incident in SolMan 7.1 SP6
BR,
K.

Return Delivery button is Disabled for Goods confirmation

Hi,
We are on SRM_SERVER 550, SP11, SAP 4.7 backend and have configured Extended Classic Scenario.
I am unable to do Goods Return delivery for Confirmations which have status u201CPosted in the Backendu201D.
The Return delivery button is Disabled, while the Delete button is Enabled, when I access confirmations through u2018Display and Process Confirmationsu2019 screen.
We have also run the jobs CLEAN_REQREQ_UP and BBP_GET_STATUS_2.
Kindly let me know if any additional job needs to be executed or any specific note that needs to be implemented.
Thanks,
Kiran

plz wait for some time . I am pretty sure STATUS JOB do this job . what variant you used for status_2 job?
if you could do it backend , but if you could not in srm means, that PO status was not updated.
even i had experience this in classic, i evening did GR inSRM and immediately wanted to do return delivery but that button was disabled for me. morning i saw it was ok . i saw RETURN was active.
muthu

Everytime I try to pay with my cc on paypal, I enter all of my infor and after I press the "review and confirm" button the same page reopens but has erased only my cc #, exp date and security cvv number. What could be wrong?

b.stats.paypal.com : server does not support RFC 5746, see CVE-2009-3555
This appears on my error page everytime I try to use my credit card through paypal. I enter all of my info (billing, etc..) and after hitting the "review and confirm" button the same page reappears and has erased my cc number and leaving my name and billing info. What can I do to finish my transaction?

The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".<br />
* http://wiki.mozilla.org/Security:Renegotiation
You may have a problem with the PayPal cookies.
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Cookies#Removing_cookies
* [[Cookies]]
* [[Enabling and disabling cookies]]

Delete Button is disabled in Check status

Hi Experts,
We are on SRM 7.0 . In Check status POWL, if the shopping cart is in 'Awaiting approval' stage requisitioner can only display the cart , we want him to able to delete the cart as well but the delete button is disabled.
We have assigned 'medium' level authorization in 'BBP_WFL_SECURITY' then the user can go into the details edit it and delete it..
But we want the 'Delete' button to be enabled on POWL screen. It is enabled if the SC is in 'Saved' status.
Any clues to achieve this?
Thank you,
Lavanya

Hi Virendar / MASA
Is RECALL facility new im SRM 700 ?
till SRM 550 REQUESTER can delete his/her cart even till follow on docuemnt created ( before confirmation done)
ln SRM 550 , requester can delete his cart though STATUS awaiting for approval / contains error/ error in process /po created.
Muthu

How to SET Focus on 'CONFIRM' button on Account identification page, CIC role?

Hello Expert,
Business role is CIC Agent.
Current Functionality-
1. CIC Agent gets a call
2. Search name of customer
3. If correct customer name found, CIC agent manually CONFIRM the account by clicking on CONFIRM button.
As per client requirement, AUTO_CONFIRM business partner is disabled from SPRO configuration.
Expected functionality -
1. CIC Agent get a call
2. Search name of customer
3. If correct customer name found, CIC agent manually press ENTER key to confirm the account.
So to get this functionality on ENTRY key (not on mouse click), BSP page element focus should be on 'CONFIRM' button, the moment SAP CRM Web UI frame work loads searched account detail. so that CIC agent once check and verify valid account and then press ENTER key to confirm.
Different Java script code already been tried on SingleObjectViewSet.htm and HiddenView.htm but couldn't achieve the Page focus on confirm button.
Your expertise in resolving issue would be very helpful.
Regards,
Ghanshyam

Hi,
tabs have a "disclosed" property that you can set with a ExpressionLanguage reference to a managed bean method. If the managed bean is in session scope then whatever this method returns for a tab will define whether or not it is displayed
Frank

Create Confirmation button in POWL

Hello Experts,
We are on ECS in SAP SRM 7.02 & ECC 6.0 EhP 6.
One of our development objects required preventing GR/confirmation for specific product categories in certain geographies. The development is done & I have tested it to be working fine.
However, there is one small issue when I create mixed carts (containing GR relevant & GR non-relevant items).
Ideally, the "Create Confirmation" button in Requester's POWL should become greyed out for GR non-relevant lines. It works fine for carts containing all GR non-relevant items.
However, in case of mixed carts, the "Create Confirmation" button stays enabled for the line item for which GR is not required (GR_IND unchecked). Though, when I click create confirmation, only the line item relevant for GR gets displayed.
All in all, I am fine with the functionality, but the "Create Confirmation" button staying enabled for GR non-relevant line items in case of mixed carts is a little misleading for my Business users. Is this standard behavior ?
I found SAP note # 1088072 (Enable/Disable of CREATE CONFIRMATION action in POWL), but it is applicable only for SRM 6.0 SP02.
An explanatory screenshot has been attached along with.
Your helpful inputs on this issue shall be appreciated & awarded points (apologies for being so direct) :-)
Many Thanks in anticipation of a resolution,
PD.

Resolved myself.
Thanks.
PD.

Can't add a certificate exception in Firefox 4.0, relevant buttons are disabled

I try to access a web site from a local network via HTTPS. The web server uses self-signed certificates, and Firefox presents a common "This connection is untrusted" window.
In version 3.x I simply clicked "Add Exception", and then "Confirm Security Exception". In Firefox 4.0, when I click "Add Exception", I see:
# "This site provides valid, verified verification. There's no need to add an exception".
# The "Permanently store this exception" checkbox and the "Confirm Security Exception" button are disabled.
I cannot access this protected site anymore. Any suggestions?

There seems to be a work around to add exception.
You have to manually go to Tools -> Options -> Advanced -> View Certificates -> Servers -> Add Exception
Then the "Add Certificate Exception" window comes up. Just enter the URL at location https:// and click "Get certificate". Then "Add Security Exception".
This will allow you to access the site thereafter.
I'm not sure though why "Add Exception" button under the "I understand the rsiks" page does not work. May be a bug.

Button is disabled or not in the next page

i have a scenario i have two JSP pages in which from the first we will be redirected to the second page. in the second page we have a save button. the save button will be disabled in some conditions. if the save button is disabled then we have to keep the first page as read only. we can't modify any feilds in that.
thanks in advance.
please help me its very urgetn for me.
once again thanks alot in advacne.

Just test those conditions in the 1st page as well.

Command button remains disabled after a request redirect to a PDF Servlet

Hi All,
I've a command button to generate PDF on the fly and used to work in JDev 10.1.3.3.
When we migrated to 11g, it works for the first time on a page, and the file Open/Save dialog will come up.
But then the command button remains grayed out, and clicking doesn't generate a server call.
If I do something on the page which does a partial or full submit, then the button will get enabled again.
Any suggestions?
Thanks,
Jaimon
Sample code:
Facelets:
<af:commandButton text="Create PDF" action="#{fs02.createPDF}" />
Java:
public String createPDF() {
//Validation checks here. If there are any errors, it gets added to FacesMessages to display on the same page.
if(!validate()) {
//sf.addInfoMessage('message here..');
}else {
FacesContext ctx = FacesContext.getCurrentInstance();
HttpServletRequest request = (HttpServletRequest)ctx.getExternalContext().getRequest();
HttpServletResponse response = (HttpServletResponse)ctx.getExternalContext().getResponse();
RequestDispatcher rd = request.getRequestDispatcher("/pdfdownloader");
rd.forward(request, response);
ctx.responseComplete();
return null;
pdfdownloader is mapped as a servlet, which writes the actual PDF content as a stream.

Herewith the code which is triggered with the post-forms-commit trg. As far as I can see it, there is no code to disable/enable the save button in the menubar.
===
PROCEDURE validate_enbr_records IS
CURSOR c_enbr
IS
SELECT exlb.exlb_length
, enbr.enbr_ind_break
FROM dog_envelop_breaks enbr
, dog_extrnl_labels exlb
WHERE enbr_appl_cod = :flow_appl_cod
AND enbr_flow_cod = :flow_cod
AND enbr_sort_seqnr <> :enbr_sort_seqnr
AND enbr_appl_cod = exlb_appl_cod
AND enbr_exlb_cod = exlb_cod;
CURSOR c_exlb
IS
SELECT exlb_length
FROM dog_extrnl_labels
WHERE exlb_appl_cod = :flow_appl_cod
AND exlb_cod = :enbr_exlb_cod;
l_lengte_break_label NUMBER := 0;
l_lengte_sort_label NUMBER := 0;
l_length NUMBER := 0;
l_aant NUMBER := 0;
r_enbr c_enbr%ROWTYPE;
mi_id MenuItem;
BEGIN
FOR r_enbr in c_enbr LOOP
IF r_enbr.enbr_ind_break = 'Y'
THEN
l_lengte_break_label := l_lengte_break_label + r_enbr.exlb_length;
ELSE
l_lengte_sort_label := l_lengte_sort_label + r_enbr.exlb_length;
END IF;
l_aant := l_aant + 1;
END LOOP;
OPEN c_exlb;
FETCH c_exlb INTO l_length;
CLOSE c_exlb;
IF :enbr_ind_break = 'Y' THEN
l_lengte_break_label := l_lengte_break_label + l_length;
ELSE
l_lengte_sort_label := l_lengte_sort_label + l_length;
END IF;
IF l_lengte_break_label > 48
THEN
qms$errors.show_message('DOG-10194');
END IF;
IF l_lengte_sort_label > 50
THEN
qms$errors.show_message('DOG-10195');
--set_record_property(3,'enbr',status,changed_status);
END IF;
IF :system.record_status = 'CHANGED' THEN
set_menu_item_property('FILE_MENU.SAVE',ENABLED,'YES');
END IF;
END;
===
After the message has been throughn and the OK-button has been clicked, the code is never reaching the code:
IF :system.record_status = 'CHANGED' THEN
set_menu_item_property('FILE_MENU.SAVE',ENABLED,'YES');
END IF;
The save-button remains disabled.
Best regards
John.

Mouse Clicks' Queue when Button is Disabled

Hi, I was wondering about the Disable property for UI
Components.
In the docs it says that when the component is disabled it
ignores all
interaction whatsoever - in particular - user interaction.
In my case, the button is disabled for a few seconds right
after it
was clicked by the user (I disable it till the httprequest is
returned
and then enable it).
What happens is that if the user clicks the button while it's
disabled
- nothing happens. But when the button turns enabled - it
acts as if
it just got the click event.
It seems like the mouse click event went into this queue and
the
button listened to it right after to turned enable?
Am I correct? If so - how can I prevent this problem?
If I'm wrong, what's the reason for this? And again, how can
I sort
this so the user can't send mouse clicks to the button when
it's
disabled??
Many thanks :)
Gilad

"giladozer" <[email protected]> wrote in
message
news:gnbng6$o6m$[email protected]..
> Hi, I was wondering about the Disable property for UI
Components.
> In the docs it says that when the component is disabled
it ignores all
> interaction whatsoever - in particular - user
interaction.
> In my case, the button is disabled for a few seconds
right after it
> was clicked by the user (I disable it till the
httprequest is returned
> and then enable it).
> What happens is that if the user clicks the button while
it's disabled
> - nothing happens. But when the button turns enabled -
it acts as if
> it just got the click event.
> It seems like the mouse click event went into this queue
and the
> button listened to it right after to turned enable?
> Am I correct? If so - how can I prevent this problem?
> If I'm wrong, what's the reason for this? And again, how
can I sort
> this so the user can't send mouse clicks to the button
when it's
> disabled??
No idea about whether you're correct or wrong, but you might
want to try
setting mouseEvents = false on the button and see if that
helps.

As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

In Table contol,add and subtract button getting disabled.

Hi ,
My requirement is that in table control when user adds more than four rows,error message will be displayed i.e maximum of 4 rows allowed.
But after error message is displayed ,add and subtract button is disabled in table control and I am not able to remove the rows.
Any solution available on making add and subtract button active.
Regards
Nikhil

Hi
In PBO,
module status_100.
looop at itab with control tc.
endloop.
in program
module status_100.
describe table itab lines tc-lines.
if tc-lines = 0.
tc-lines = 4.
elseif tc-lines > 1.
tc-lines = 4.
endif.
endmodule.
here there is no way you will get more than 4 rows at any time.
instead of Error message you can give warning or information message. this will not disable your buttons.
Cheerz
Ram

Confirmation button is disabled

Similar Messages

Maybe you are looking for