Confirmation by different user than requester

Hello Gurus,
I have the following issue working with SRM 5.0 classic scenario. An user creates a SC. Afterwards, the normal process for the SC is followed. The PO is created in the back end.
The requester usually creates the confirmation in SRM. Is there any way to delegate that task (by the user himself) to another person in case the requester goes on vacation?
Any suggestion how to deal with that? Thank you very much in advance.
Regards,

Hello,
Thanks a lot for your reply.
My question now is: Is there any other choice to deal with this, different than assigning a rol to the user? I mean, anything similar to purchasing substitute?
Best regards,
Miguel

Similar Messages

How do I fix my ipod when it skips songs,doesn't play song,or plays a different song than requested?

My ipod started messing up ever since i downloaded the ios 5. Everytime i request a song it will skip the song and pick a random song, not play the song at all sorta like it's frozen in that spot until i fix it, or i will click on a song and it will play a different song all together but with the title song that i chose. i'd really apprieciate the help. Thanks so much,
Hannah

When updating or restoring some iPods via a usb connection, it needs to be plugged into power via the charger to complete the process, and this is why you see this icon displayed.
It's also why older iPods that required this step were supplied with a power adaptor as standard.
You may be able to complete the process via a car charger, or via a powered firewire port on the computer (with the required 6 pin cable of course) if you have access to either of those. Or maybe visit an Apple store if one is nearby.
Or you can try this.
No power adaptor? Try this.
Other than that, your iPod cannot be used until you complete this process.

How do I copy backed-up files from an external hard drive back to my MBA, but under a different user than the one from which they were backed up?

On the advice of the Chicago Mac Genius Bar, in order to get better performance on my few years old MBA, I copied my Home folders (but not Library) to an external hard drive, created a new user, deleted the old user, and tried to copy the Home folder contents from the external hard drive back to the MBA under the new user. However, I get an error message and can't open most of the folders on the external hard drive (e.g. "The folder “Desktop” can’t be opened because you don’t have permission to see its contents.") Help! Thanks.

As captfred says, yes (as long as the drive is formatted for a Mac, not Windoze).
You might want to review the [Time Machine Tutorial|http://www.apple.com/findouthow/mac/#timemachinebasics] and perhaps browse [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

How can I get rid of malware that redirects to a different website than requested, i.e. Price Grabber?

When I open Firefox, my default browser, another tab opens with shopping "deals" featured. If I search in Google and select from the list of results, I am often redirected to a different shopping channel.
Somehow this malware has gotten past my always-running virus checker and is not detected by Adaware or Search&Destroy.

Try running either of these malware scanners, they are considered to be aamongst the best:
* Malwarebytes - http://www.malwarebytes.org/mbam.php
* SuperAntiSpyware - http://www.superantispyware.com
For particular information on Google re-direct virus see http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
Also check to see if an add-on is causing this behavior, for details of how to do that see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Can I run a different user as the managed server than the admin server?

Under unix, can I run a Weblogic 7 managed instance as a different user than the
admin server in the same domain? If not, any reference docs on BEAs site?

You mean a different UNIX user? Yes, that should be fine.
-- Rob
Frank wrote:
Under unix, can I run a Weblogic 7 managed instance as a different user than the
admin server in the same domain? If not, any reference docs on BEAs site?

Can you run a different user on the managed server than the admin server?

Under unix, can I run a Weblogic 7 managed instance as a different user than the
admin server in the same domain? If not, any reference docs on BEAs site?

That shouldnt pose a problem.
anand
In article <3f679e4d$[email protected]>, Frank wrote:
>
Under unix, can I run a Weblogic 7 managed instance as a different user than the
admin server in the same domain? If not, any reference docs on BEAs site?

CF10 Enterprise, multi-instance w/different user accounts

Running CF10-Enterprise, 10,0,9,284568 with Update 9. This is running under JDK 1.7.0_21, and is fronted by Apache 2.2.x and all runs under RHEL6.x. It seems to work fine
In short - is it possible to create a new instance, and have that new instance run as a different user than the "main" instance? If so, what trouble does it cause?
In more detail...
The main reason we'd like to have a separate Instance is for "complete" isolation, to prevent one CF process or instance from affecting another, vs having one CF instance and just a lot of websites under it. Service isolation is a policy.
I spin up a new Instance (CF Admin -> Enterprise Manager -> Instance Manager), and start it. It runs as the user "cfusion", which is the same user that the main instance runs as. I'd prefer it to run as another user, namely the user that owns the site this instance is for. So if I have site www.site1.com owned by user site1, I'd like the CF java process to run as user site1 as well, and not the cfusion user.
In the past, this "complete" isolation was managed by deploying CF9 as a WAR file and running it under Tomcat. Each website had its own user in /etc/passwd, and that was the user the CF-under-Tomcat process ran as, the files were owned by that user, etc. But CF10 (currently at least) doesn't support being run as a WAR file under Tomcat.
The files in /opt/coldfusion10/ are owned by the user cfusion. An instance I created is in /opt/coldfusion10/testsite/. Could I chown -R testsite:testsite /opt/coldfusion10/testsite/ (user named same as instance name)? And the run /opt/coldfusion10/testsite/bin/coldfusion start, as the user testsite?
I'd lose the ability to easily manage this instance from the main CF Administrator site, such as Updates. Under CF9, the update process sucked and was manual and I had to do it for each site anyway (sigh.) But CF10 has a nice(r) update method, and I'd lose that. But if that's the only thing I lose, and I have to manually update each instance, I guess I can live with that (no different than what I'm doing now, still easier though under CF10.)
I suspect this is just simple lack-of-knowledge on my part (as are many things in my life.)
Thank you,
PH

Sorry, no. I haven't found a way to do this, if I want to manage it all from the primary CF instance. I can, of course, manipulate each instance independently. But that does rather defeat the purpose of having multiple instances via the Instance Manager.
I haven't looked in to it much more. I could probably hack together a combination of password-less sudo and editing of the coldfusion start/stop scripts. But I don't think that level of editing would be a good idea, not to mention if there ever is a CF update that might specifically rely on unaltered scripts.
PH

Execute crs_stat –t with different user

Hi Xperts
I am trying to do a monitoring script and I want to execute crs_stat –t with different user than Oracle (DB and Grid owner), I receive:
CRS-0245: User doesn't have enough privilege to perform the operation
CRS-0202: No resources are registered.
I already register User2 to Oinstall group and I am able to connect to sqlplus with User2.
This monitoring scripts is going to be part of one monitoring tool, I already integrate other DB monitoring scripts.
DB: Oracle RAC 11gR2(11.2.0.3) with OEL 5.9
Thank you for your time
Regards

can you try to execute crsctl stat res -t -init using user2 .
crs_stat command is deprecated in 11gR2.
Thanks,
http://gssdba.wordpress.com

We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
Appreciate your support and if possible , how to do this?

If you want to work with Mac OS X, you need one computer per simultaneous user.
What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

Good night, I ended up making a purchase at Apple, but my credit card operator called me to confirm the values and was told different values than bought. Purchases appeared as: $ 159.70 (protocol 604627) $ 137.00 (protocol 604538) $ 105.39 (protoco

good night,
I ended up making a purchase at Apple, but my credit card operator called me to confirm the values and was told different values than bought.
Purchases appeared as:
$ 159.70 (protocol 604627)
$ 137.00 (protocol 604538)
$ 105.39 (protocol 604468)
$ 0.01 (protocol 615633)
Could you check what is happening? Because I had to cancel my card for security.
Sincerely,

np33td33 wrote:
My purchases were:
macBookPro
office 2011
iwork
ilife
and these purchases did not appear in the system credit card
Call Apple at 1800MYAPPLE. We just deal with MacBook Pro issues, and we have nothing to do with Apple. Please read what others have posted.

When downloading an update from app store, password is requested from a different user. How to change user?

when downloading an update from app store, password is requested from a different user. How to change user?

Unfortunately there's no way around this. you will need that password to update the apps. If he won't give it to you, then i'm not sure what to say.
You should have kept the account with the Apps you bought yourself.
Otherwise, as I said, delete the Apps, and buy them again.
Sorry.

How to gain different permissions than the user's current logon provides?

I have a computer on a local network which contains a shared folder, and I've granted reading permissions for all users.
How can I grant a certain Java application, or gain from a certain application, which a user running on a different computer, permission to write to that folder without granting this user the permission?
Basically I need to create a situation when the other users can add files to the folder only through my Java application.
Thanks.

You are right i wouldn't like to change owner. But I would like the program to be able identify itself as a different user who has writing privileges, or something of that sort, in order for it to have permissions. Something similar to the 'runas' command in windows.

How do I use OracleMaps Javascript API from a different host than MapViewer

Hello,
I have successfully set up the Mapviewer quick start 10131, and am able to view the sample page showMap.html perfectly. I would like to run this same sample on a different server than where Mapviewer is installed. Let say mapviewer is installed on jstraub-winsvr:8888 and I want to run showMap.html from jstraub-linux1:7777. I tried changing the function showMap and the location to oraclemaps like the following:
<script language="Javascript" src="http://jstraub-winsvr:8888/mapviewer/fsmc/jslib/oraclemaps.js"></script>
function showMap()
var baseURL = "http://jstraub-winsvr:8888/mapviewer";
var mapCenterLon = -122.45;
var mapCenterLat = 37.6706;
var mapZoom = 4;
var mpoint = MVSdoGeometry.createPoint(mapCenterLon,mapCenterLat,8307);
var mapview = new MVMapView(document.getElementById("map"), baseURL);
mapview.addBaseMapLayer(new MVBaseMap("mvdemo.demo_map"));
mapview.setCenter(mpoint);
mapview.setZoomLevel(mapZoom);
mapview.display();
Now when I try running this page on jstraub-linux1:7777 I get a Javascript error, and in Firebug, I can see that there are request like the following:
POST: http://jstraub-linux1:7777/mapviewer/ReturnLocaleOper
GET: http://jstraub-linux1:7777/mapviewer/mcserver?xml_request=%3C?xml+version=%221.0%22+standalone=%22yes%22?%3E%3Cmap_cache_admin_request%3E%3Cget_client_config+map_cache_names=%22mvdemo.demo_map%22+format=%22JSON%22/%3E%3C/map_cache_admin_request%3E
Obviously those requests are bogus since mapviewer is at jstraub-winsvr:8888 and not jstraub-linux1:7777, I just want to run the page from jstraub-linux1:7777. Anybody know how I do this?
Regards,
Jason

I believe that I am having the same problem. While I don't yet have a resolution, I do have a bit more information that may be useful. I have examined the oraclemaps.js script file and found some relevant references to the Javascript document.location object. As I watch the script execute, it seems that the author has made the assumption that the page served to the user has been served from the same Oracle Application Server running MapViewer. I have listed the lines that contain references to document.location below. (The line numbers may be off by a line or two as I have made some minor changes to facilitate my investigation.)
Line 742 : //_f16._f104="http://"\+document.location.host\+"/mapviewer/foi";
Line 6280 : var x2=String(document.location);
Line 10270 : var x40=String(document.location);
By changing line 742 to...
f16.f104="http://mymvserver:8888/mapviewer/foi";
...I believe I have the script looking in the right place. (Previously, it had been looking for /mapviewer/foi on the server that originally served the page.)
The x2 variable (at line 6280) seems to provide the current document location as a means to determine the MapViewer URL. Once again, the author seems to presume that MapViewer is found on the same server that originally served the page.
this._f53=x2.substring(0,x3\+x5\+2)+"/mapviewer";
I changed this line to read:
this._f53="http://mymvserver:8888/mapviewer";
Having made these changes, I have moved past the "object not found"-types of errors I had been getting. I now get "Permission Denied" errors which, I am thinking, may be the result of cross-site scripting problems predicted by the previous poster.
So, my question is this: Is it really expected that the page that integrates the map display must be served by the same Oracle Application Server instance on which MapViewer is running? This strikes me as an absurd limitation, so I assume it is not the case. Indeed, there is a post on this forum by another user who claims to have written an ASP.Net application that uses the Javascript interface to integrate MapViewer and the map display ( Link:securing mapviewer ). This is precisely what we are trying to do; but I have yet to determine how to go about doing it.
Can this be done? Is there any documentation that describes how to accomplish this?

RE: (forte-users) Object Request Brokers.....

Hi Rajeev,
I just happen to have the following two technotes on hand that helped me
answers the very same questions..
<<forte.zip>>
Hope it helps... if you need more help... fell free to give me a shout!
Ciao
Kim
-----Original Message-----
From: Rajeev Talwar [SMTP:rtalshotmail.com]
Sent: Monday, February 21, 2000 6:34 PM
To: kamranaminyahoo.com
Subject: (forte-users) Object Request Brokers.....
Hi All,
We are writing a cold fusion application which needs to use some
services from a Forte application. We also have a Cold Fusion Visi
Broker(ORB)to communicate with Forte. I was wondering what all we need
in order to get a handle to all the service objects used by Forte
application in our Cold Fusion application.
Also do we need to change our deployment scheme for the Forte
application. I
believe we have to make a special deployment
for Forte application to be available to ORB's. By default,
Forte uses Unix internal communication mechanism like sockets
etc. for service objects to be available across different
partitions.
Also do we need to run both applications and ORB on the same box
or can we put them in some kind of network.
I hope I made myself quite clear what we are looking for. I will be
more than happy to put some more details in case someone needs
further clarification.
Are there any technotes out there whcih we can refer to.
I will appreciate any thoughts.
-Rajeev Talwar
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a
new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com

You can also use the HTTP-DC project.... You don't
need Web Enterprise for this. From what I can tell,
this is available in L.x on....
There is api documentation in M.2 (with scant
examples.)
There's a special process to put the project in your
repository (it isn't installed in the repository in
the standard install,) the documentation in M.2
(probably in M.0 too, AFAIK) that tells you how to do
this (look for HTTP-DC in the online help.)
I haven't done much with it yet, I've just installed
it. If anybody out there has examples, that'd be
great. I'll try to contribute more the moment I get a
chance to explore it....
Christopher Fury
BellSouth Communications Systems
--- Daniel Nguyen <dnguyenclub-internet.fr> wrote:
Hi,
If you have Web Enterprise, you can user
HttpAccess.SendRequest().
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
Amin, Kamran a écrit:
Is there any way to make a HTTP request from TOOLto another HTTP Service?
thanks in advance.
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. Tounsubscribe, send in a new
email the word: 'Unsubscribe' to:forte-users-requestlists.xpedior.com
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To
unsubscribe, send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/

Confirmation by different user than requester

Similar Messages

Maybe you are looking for