Confirmation control key does not exist

There is a old one PO, which was created with confirmation control key ZSC1 ; Now issue is ZSC1 has been deleted but it is showing in po, now user want to close the po as want to ticked the "delivery completed" ind. in the Delivery tab page at Item level in the po.
In this cas he is facing the error as "Confirmation control key does not exist" so:-
1. How can be close the po.
2.Is there any option, from where we can check the change control i.e. can be checked when ZSC1 was deleted.

Hi Jurgen,
I think you misinterpret regarding this issue.
confirmation control key is not deleted in PO.
It is deleted from configuration setting I mean from IMG -> Material Management -> purchasing -> confirmation -> Setup confirmation control.
since it's exists in po but not in config. thats the reason system given us that error.
so my question was:-
how to get change control for the same, i.e. when it was deleted from config. setting
And how set del. completed ind. in po for closing the po, bcoz it's showing error as "Confirmation control key ZSC1 does not exists"

Similar Messages

Error while connecting to ATE DecryptPasswordError "Key does not exist",,,

Dear All,
While trying to implement Syclo Service Manager with SAP CRM , I am trying to start the ATE (Agentry Test environment) on Windows after getting connected to the development server. However, I am getting the below error after I give my user ID and password on ATE login pop-up.
DecryptPasswordError <"Key does not exist",,,>
It initially says that the password is incorrect and asks if we would like to connect to the server instead. When I click on "Connect", the above mentioned error is displayed.
Can you please help me with this. As a matter of fact, in the past, I have been able to connect to ATE without any issues, but not sure what could be the problem this time.
Any quick help is highly appreciated.
Regards,
Ashish Dhagat
Tags edited by: Michael Appleby

Hi Ashish
Without seeing the rest of the logs, I'm assuming you are getting some kind of logon error.
If so, this error can happen if the the Agentry Server fails to load the "cryptography context and key container". This can be found by viewing the Startup.log files located in the LOG folder in the running Agentry Server folder.
The following is an example of the Startup.log:
     05/05/2009 12:50:55, 0, 0, 2, Thr 2120, Key container does not exist, attempting to create a key container.
     05/05/200912:51:02, 0, 0, 2, Thr 2120, Failed to acquire cryptography context and key container. 05/05/2009 12:51:02, 0, 0, 2,
     Thr 2120, Error 2148073487 loading cryptography key
This issue is caused by the User that started the AgentryServer.gui (or LOCAL SYSTEM if running as a Service) which means the user does not have access to the MachineKeys folder. The user needs to have full access to the following folder:
               C:\Documents and Settings\All Users\Application Data\Microsoft\Crypto\RSA\MachineKeys.
If running as a Service, the user should confirm the logon account.
To change the Logon account from Local System Account to 'This Account' option (needs to be an admin account):
Go to Control Panel->Administrative Tools->Services.
Right click on the appropriate service and select 'Properties'
Select the tab 'Log on'.
Click the radio button next to 'This account'
In the field next to 'This Account', enter ID used for logging into Windows (admin account)
In the Password and Confirm Password fields, enter password associated with the Windows login ID
After verifying that the user has full access to the folder, restart the Agentry Server, and with a cleared client, connect to the Server.
Let me know if this helps.
Thanks,
Ray

Extraction error "Target cost version in controlling area does not exists"

Hi Gurus,
I am trying to pull some data from a SAP OLTP system into SAP BW 710 system, using extractor "0CO_PC_02". The data load is failing with the below error message:
Target cost version in controlling area does not exist     KN     147
Target cost version 2 not defined. Check your entry     KV     35
Internal program error ( Order 000010510554 Version 002 )     RM     11
Errors in source system     RSM     340
The same error is thrown when I am trying to execute the extractor in RSA3 in the source system.
Please help me with the resolution of the same. It's a high priority job we are handling as of now in this.
Thanks & Regards,
Vikas Kr.

You are attempting to display data on a target cost version that does not exist in controlling area.
see this http://forums.sdn.sap.com/thread.jspa?threadID=1609418
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YV-KN147

Unexpected error;Primary key does not exist:CmscdomPK version=2,name=J2E

Hi I am getting the following error when i try to access the CMS related WebDynpro application.
First time i am able to access the CMS.I created the domain and track.after that i edited the Domain tab with new domain name J2E.During that time i tried to save the domain,its throughing the Primary key does n't exist error.I closed the application.Again when i tried to access the CMS.Its throughing the following error.
<b>Error stacktrace:
com.sap.tc.webdynpro.progmodel.controller.MessageManager$AbortMessageManagerException: Unexpected error; inform your system administrator - Primary key does not exist: CmscdomPK version=2,name=J2E
     at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessageInternal(MessageManager.java:254)
     at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessage(MessageManager.java:964)
     at com.sap.cms.ui.wl.Custom1.hasTracks(Custom1.java:860)
     at com.sap.cms.ui.wl.Custom1.wdDoInit(Custom1.java:277)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.wdDoInit(InternalCustom1.java:990)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingCustomController.doInit(DelegatingCustomController.java:73)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:436)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:374)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:403)
     at com.sap.tc.webdynpro.progmodel.context.AttributeInfo.initAttributeMapping(AttributeInfo.java:596)
     at com.sap.tc.webdynpro.progmodel.context.AttributeInfo.init(AttributeInfo.java:456)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initAttributes(NodeInfo.java:771)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:756)
     at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:41)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.displayToplevelComponent(ClientComponent.java:134)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:373)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:608)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:252)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:392)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)</b>
What causing the problem.I am not finding the way,where can i rectifything problem
Regards
Usman

Hi Usman,
Domain ID and CMS Server ID are also stored in the SLD when you create these for the first time. As of now you can just create one Domain and One CMS Server id.
If you have to edit it you may have to do the following.
1. Delete all the tracks under the domain id and the CMS server id.
2. Then in SLD. go to HOME -> CONTENT BROWSER -> SUBSET = LANDSCAPE DESCRIPTION
In the CLASS dropdown please select Change Management Domain. Select the domain that you had created and delete it.
Again in the CLASS dropdown select Change management Server. Select it and delete.
Note: Please ensure that all the tracks have been deleted before you delete SLD entries.
Now login to CMS again and create the Domain and CMS server again.
If possible please try this some where on a test machine if possible and then try in actual scenario.
Hope this helps.
Regards
Sidharth

The specified registry key does not exist

I recently reinstalled DPM 2012 R2 (fully updated) after deleting the protection groups, database, wiping the tapes, everything and reconfigured everything from scratch after it became too unstable to use. Unfortunately since then I've found that the
MSDPMCurr.errlog is full events that look like the following:
163C      013C
03/05     18:01:13.420
09
ApplicationSettings_expanded.cs(1387)
NORMAL
Ignoring exception in ReadRegistryKey System.IO.IOException: The specified registry key does not exist.
163C      013C
03/05     18:01:13.420
09
ApplicationSettings_expanded.cs(1387)
NORMAL
   at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str)
163C      013C
03/05     18:01:13.420
09
ApplicationSettings_expanded.cs(1387)
NORMAL
   at Microsoft.Win32.RegistryKey.GetValueKind(String name)
163C      013C
03/05     18:01:13.420
09
ApplicationSettings_expanded.cs(1387)
NORMAL
   at Microsoft.Internal.EnterpriseStorage.Dls.Utils.ApplicationSettings.ReadRegistryKey(String registryKeyPath, String registryKeyName, Int32 registryValueKind)
Unfortunately it doesn't tell me what registry key it's looking for so I can't find out if it exists. Is there any way of finding this out?

Thanks for the advice, I found the vast majority of them were for cache entries and agree that these can be safely ignored.
HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Configuration\CacheInquiryResults\<protected server FQDN>
However, I also found the following:
HKLM\Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired
HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Configuration\gnorableSqlErrorNumbers
HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Configuration\CloudBackupEnabledApps
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{8AB21D86-21F0-430A-9AD1-2D90077104C3}
HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Configuration\UI
All of these are missing from the registry is this likely to cause any issues?
Edit: also found this repeated in a DPMRACurr.errlog:
0E08   16CC   03/09   08:30:03.323   05   genericstatus.cpp(1256)   [0000000003C32AA0]   ED0A1862-1405-438A-ABC8-22CFD64C278E   NORMAL
Wait for CallUpdateQfesInstalledRegKey succeeded. Returning m_QfesInstalled = 31
0E08   16CC   03/09   08:30:03.338   03   schannelutils.cpp(129)       ED0A1862-1405-438A-ABC8-22CFD64C278E   WARNING
Failed: Hr: = [0x80070002] : Error trying to open RegKey [HKLM\Software\Microsoft\Microsoft Data Protection Manager\Agent\2.0\Certificates\<FQDN of backup server>]

Object referred to by the object key, does not exist

I am trying to create a transport request for an Item Catagory & get the following error message :
Object R3TR TABU TVAPT, referred to by the object key, does not exist
Message no. TR600
Diagnosis
    The object keys of the request/task cannot be edited because the object R3TR TABU TVAPT) which is referenced by the object key is not in the request, nor is it going to be added to the request.
System Response
    The function terminates.
Procedure
    If the error occurs in an application transaction, extend the missing object entry in the Transport organizer (SE09). If the error occurs again, contact the application hotline.

Hi Nitin,
Please check this SAP Note <b>90799</b>.
Perhaps it will help.
Regards,
Ferry Lianto

Error in accounting document for Billing - Costing Key does not exist

Hi,
We had activated COPA for updating Record Type - A (Sale Order) and Record Type - F (Billing Document). Subsequently we have removed all the settings done for Record Type A (Sale Order) including Costing key.
Now after this change we get the error of "Costing Key XXXX does not exist" during generation of accounting document for Billing.
Can any body suggest how to over come this error without creating costing key of Record Type A (Sale Order).
Regards,
Ela.

Hi Ela,
Please use T. code KE4J and remove Costing Key from record type F( Billing) then system wonu2019t look for Costing key during releasing billing document to accounting & use T. code KE40 to correct Costing key settings if required.
Regards,
Shailesh Verma

Error While Confirmation: Grant 0 does not exist

Hello Experts,
We have SRM 4.0
While doing confirmationuser got error: 'Grant 0 does not exist'.
(SC with,Service line item with Acct Assignment Category : Asset valuated GR(E) with asset number but no GL acct), What is significance of such error?
Thanks,
Dhananjay

With my apologies for the typo indeed.
User2 must grant select on his two tables to user1 with grant option:
SQL> grant select on table1_from_view to user1 with grant option;
SQL> grant select on table2_from_view to user1 with grant option;
Don't get tempted to make the same mistake as I did...

Media controls keys does not work on iTunes?

My keyboard has those "Media Controls Keys" on it (just like Play or Stop etc.) but it won't work with iTunes, unless iTunes is on the front of all windows. I used to use Windows Media Player and it can work with the Media Controls Keys even the player is minimised. Are there any ways simply changing settings with iTunes and solve the problem?

Hello,
I don't have a W541 myself, but here are a few things to check, in no particular order:
Have you checked with your IT department? Maybe they set a poilicy to disable the card reader.
Is the card reader correctly enabled in the UEFI firmware?
Have you run ThinkVantage System Update and Microsoft Update to confirm all of the various Lenovo and Microsoft updates are installed?
Do you still have the OS image the device originally shipped with? If so, does the card reader work under that?
Regards,
Aryeh Goretsky

Controlling area does not exist in assignment ?

Hi,
I've created & assinged controlling area to the company code , But then When I used PPOME to create org unit and assign the Controlling area , It did not exist in the list ? How can i configure this
Thanks in advance

Hi,
Check in V_TKA01_GD table (assign company code to controlling area) whether controlling area is assigned to company code properly or not. If it is assigned properly then in PPOME Tcode in Account Assignment tab once you enter your company code Controlling area will be selected automatically.
If controlling area is not assigned to company code properly then you will not able to see that in PPOME. In this case you can take help from FI consultant as they only create Controlling area and assign it to company code.
Regards,
GRM

My mission control key does not work with the new Mac update

The key on the keyboard doesnt work, neither does the button on my dock. Any help?
P.S. is anyone else having as much trouble as I am with the new update?

The pre-2006 Mac models this forum covers cannot run a Mac OS high enough to have Mission Control. If you can identify your Mac to us we can get you moved to a more active forum.

Get performance when key does not exist

Hello,
I am using BDB version db-4.5.20. I try to get an object which is not present and the performance of this call is extremely slow. The newer versions have an exists call for the key. How can I get better performance in this case. I am using HASH as the underlining DB format.
Do let me know if you need any more information.
Thank you!

Hi,
If your keys present a locality of reference (accessing a particular key in the Btree is likely to be followed by an access of keys located "near" that key as per the defined sort order) then you'll probably be better of using Btree. Here is information on how to select the underlying access method:
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am_conf/select.html
For the Hash access method there are several configuration options you can play with: the hash key comparison function (as of BDB 4.6), the hash function used to distribute keys, the hash database page fill factor and the estimated number of elements that will be stored in the database. Information on these can be found here:
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_h_compare.html
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_h_hash.html
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_h_ffactor.html
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_h_nelem.html
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am_conf/h_hash.html
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am_conf/h_ffactor.html
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am_conf/h_nelem.html
Regards,
Andrei

Error AFAB---Cost center '' in controlling area does not exist

Hi,
While run depreciation appear the error message KI222, even if cost center exists and I can post on hin direct from FI.
Regards,
IM

Hi,
Error KI222 is caused if some cost centers do not have   leading zeros in table ANLZ.
To avoid error KI222, you need to add the zeros in ANLZ-KOSTL.
Example in ANLZ:
BUKRS ANLN1          KOSTL
XXXX   000000084059   0000001214
XXXX   000000089990   1214
Regards Bernhard

Control indicators for controlling does not exist

Hi,
While doing g/l posting I got this error "Control indicators for controlling area----does not exist"
Please help me with the solution.
Regards,
Jyoti

your config is missing go to tcdoe OKKP, selecet your controling area and then select the tab activate components and make sure they are active and the boxes are ticked
Points will be appreciated
Regards,
Zaid Azam

Confirmation control key not getting copied into PO created via ME59N

Hi,
I have maintained confirmation control key 003 in vendor master. Ticked automatic PO in vendor master as well as material master.Info record & source list (Fix vendor) are also maintained.
I have manully created PR & assigned source of supply. Now when I am trying to convert PR to PO via ME59N, confirmation control key is not getting copied from vendor master.
Note that I have not maintained CC key in info record. When I am creating PO manually wrt PR, CC key is getting copied from vendor master.
What could be the reason?
Regards,
Piyush

Hi Piyush,
Incase of Automatic PO creation /conversion of PR to PO automatically. Purchase info record is must along with the activation of CC Indicator (because PIR is a master record with the combination of vendor and for a certain material) to pull the CC key into the PO automatically.
Hence CC activation in PIR is required inorder to populate the Confirmation control key into the PO when it creates through Automatic PO with PR assignment using ME59N. Otherwise you have to specifiy manually incase of manual creation of PO.
Hope it clarifies,
Regards,
Sapsrin

Confirmation control key does not exist

Similar Messages

Maybe you are looking for