Confirmation Error in process order
Hi
During partial confirmation of process order,i find that for a Phase/counter the goods moment for 101 has taken place but no entry is posted for 261.But the material document shows one 101 movement and two 261 movements and for the reversal of the confirmations of the same counter the material document shows only one 102 movements.Can u kindly help me in the root cause of this error in posting.
1.Why 261 Movement is not dspalyed but two entries on the material document are found
2.The reversal process has only one 101 Movement
Thanks
Praveenkumar
Hi Prasobh
We have three activates happened on this order.
Partial confirmation for counter 10.
Reversal of posting for counter 10.
Partial confirmation of counter 12.
During partial confirmation there is one 101 movement and two 261 movement happened through material document xxxxxxxxxxxx. The second 261 should not have happened.
During the reversal only had one 102 movement and there was no reversal happened for 262 in material document xxxxxxx. But we have 2 COGI errors for counter 11, this is not cleared the reversal though the COGI error was cleared. The CORT will not show counter 11 since its a reversal of counter for 10.
In above all we should not have two movements for 261. Also after clearing from COGI we have no posting for 262 movement. But the document for 102 is posted when its cleared from COGI.
Similar Messages
-
CORK error at process order Confirmation
Hi all
While Process order Confirmation (CORK) iam getting the following error
G/L account 499999 is not defined for chart of account 1000
Message no.F5507
I have run the same in Dev. Client
but unable to do in the quality client
i have checked in OBYB in both the clients
setting are same
plz.. provide the solution
thanx in advance
useful solution points will be awardedHi,
While confirming the Process Order, the following will be the effect in Accounting
FG Stock Account Dr.
To COGM Account
The followings are the possibilities in your quality client
1. whether you have defined the above account in Chart of Account and Company code segment level?
or
2. You should check it in OBYC > GBB > AUF (COGM account) and in BSX key (Stock account for Finished Inventory)
or
3. Whether it is blocked for posting or marked for deletion at Company Code level or Chart of Account level?
Regards,
Jigar -
Sales order stock error in Process order confirmation
Hello SAP Gurus,
In Make To order scnario while I do COR6 order confirmation it gives me Error that Sales order stock does not exist.
Can anyone suggest me which way I can remove the error?
What is the Transaction and movement to transfer stock to SALES ORDER?
Please reply...
Thanks & Regards,
Bhavik Dangi.Hi,
As per your mail, you can move the stock from normal stock to sales order stock through transaction MB1B with movement type 412 E. This route is generally follow if want to assign stocks manually to sales order stock otherwise if follow the PP route then system generates the stock against the sales order line item at the time of produciton confirmation and requirement type use in this are KSL, KE.
Rewards if it helps.
Regards
Goutham -
How To Reverse Excess Confirmed Quantity in Process Order?
Hi Experts,
Good day!
I have a Process Order with Total Quantity of 68,180 L which currently have a status of TECO CNF DLV PRC BASC BCRQ GMPS MACM*. I made my first partial confirmation with a quantity of 1,000 L for my Finished Good u2013 this is a confirmation with automatic goods receipt. Then I mistakenly made my Final Confirmation for this order with a quantity of 71,125 L for my Finished Good. I only noticed that my last confirmation was incorrect after the Finished Good in Stock has been depleted already. The 101 movement for the Finished Good that was posted during my final confirmation was not reversed anymore when I canceled my confirmation in CORS. I tried to reverse using a 102 movement type for this order in MB31 however it didnu2019t allow me to proceed and gave me an error said u201Cdeficit of .....in Unrestricted useu201D.
Currently my Process Order has a total Delivered Quantity of 72,125 L which is much greater than the required total order quantity of 68,180 L.
Anybody knows how to reverse this excess confirmed quantity? Your response is much appreciated.
Thanks. Have a wondeful day!
RockzHi Rockz,
You mean you made Good Receipt (confirmation) excess 3,945L .
Right now, you want to cancel only 3,945L.
As you said, FG already depleted.
If have no quantity in unrestricted Use, how can we make good movement(102) (because error:u201Cdeficit of .....in Unrestricted useu201D occur when you do TCode MB31 for 102)
If you want to cancel 3,945L, first, you must reverse that Batch of FG 3,945L to Unrestricted use (MMBE to check stock), then you use the TCode MB31 with movement 102 for reverse FG excess, if this finish, quantity in delivery of Process Order will be subtract 3,945L.
(reverse that Batch of FG 3,945L to Unrestricted use ,mean is the Batch of FG which you depleted for somethings like fill to bottle....)
Regard,
DiepNguyen. -
Confirmation - error in process - idoc status 29
HI ,
i got one new problem today.
This is one of the case when one user createsconfirmation of the Purchase order and then Confirmation status goes to error in process. i check in RZ20 and found error in Idoc which is generated from that confirmation,When i check the status record it says error in ALE.status 29. Only an inactive partner profile was found with the following key and this is my PRDCLNT100 (production system address).
I can see that all other confiramtions are getting posted but having an issue with one confirmation.
2ndly how i can delte error in process Confirmation . So that we can create new confirmation , or is there any other way to get my present confirmation status to Posted.
SmritiHi Smriti,
Regarding working on the faulty IDOC
In WE19 check what Function module will be used to post the data, you can see it when you go to 'standard inbound'. Then you can debug it when you click to the button 'inbound function module', here enter the function module and click 'call in debugging mode' and 'in foreground', then press the button 'enter'. Now you are in the debugger and can check why the error occurs and what should be filled.
If you know the error number set watchpoint at sy-msgno = *** or just set breakpoint at statement message.
If this is only happening for one confirmation, the standard approach to delete this is the following.
Issue:
The corresponding IDOC for the confirmation document has not been processed successfully and ended with error in the backend.
Solution:
Because of this there is entry left in the table bbp_document_tab,
which is not allowing to cancell the confirmation document.
Please find the attached note 338985, which contains the procedure to
to delete entries from table bbp_document_tab.
Hope this helps,
Kind Regards,
Matthew -
Restrict Confirmation COR6,CORK Process Order
Dear All,
We have an requirement of Auto posting of PM while Process Order Confirmation of Packing Material only.
So I would like to restrict Goods Movement Screen of COR6,CORK
So Please refer following scenario at confimation.
Material
Quantity
Goods Movement
SKU ( FG )
10
101
RM 1
50
261
PM 1
10
261
So My Order quantity is 10, and if user try to take GR of 5 SKU then corresponding PM should be 5 only , as of now user is manipulating PM qty if stock is not sufficient & confirm the order.
1) I have checked similar forum on SCN also.
2) Checked badi WORKORDER_GOODSMOVEMENT.
3) It is to be restricted to only particular order type so i cant use SHD0 also.
4) Requirement is screen should throw error if PM qty is not corresponding to SKU qty.
5) Any Steps to achieve the same will be helpful.
Regards,
Deep DaveHi,
You can set tolerence limits for your purpose.
Maintain underdelivery and over delivery tolernce limits in the material master. (work scheduling views)
And in customizing setting "Define Confirmation Parameters" (OPK4), check "Error" with respect to under and over delivery tolerances, for the order type you are using.
Try confirming with more quantities, system should give error message.
Regards,
Pavan -
Error in Process Order Creation
Hi Experts,
I am facing a problem while creating a process Order in COR1
I have got an error reading Master Data which is
No task list for select.ID 04 for auto. task list selection found
Please Help me out.
Thanking You In advance.Dear Ashish,
1.Check if a master recipe exists for the material in C203 and if exists means check the usage and status of the master recipe.
that is value for status as 4 - Released General and usage - 1 - production .
2.If no master recipe exists means then create one using T.Code C201.
3.Then check the impact in COR1.
Regards
Mangalraj.S -
Error during Process order settlement
Hi Gurus,
i am facing problem during the process order settlement. an error is occured is as follows: Tax code V0 country IN does not exist in procedure ZTAXIN.
actually this V0 tax code is assing to the ZTAXIN procedure & which is also assign to country. i couldn't get why it ask tax code during the settlement.
In Process order Itemization i find the 2 GL ( Element) in which there is one consumption GL & second is COFG sold GL. from GL Master i remove both GL Tax category & also remove the click from posting without tax allowed. till i am facing this problem?
Please help me to overcome this issue.
Point will be rewarded if question solved.
Than'x
Dhananjay Rhi gopan,
Than'x for attention on my question. till my problem is not solved. during the process order why it hit the tax code? would u please guide me how to find the tax code assignment which hit during the process order settlement?
i have check all the Tax related setting till this issue not solved. ( Check calculation procedure (OBYG), Tax code assignment (FTXP), also check the Tax Account Integration (OB40).
also i remove tax related assignment from the GL master related to specific gl which are display in component structure.
pls help me to solve this issue..
Than'x
Dhananjay -
Error in process order printing
hi ,
when i am trying to print the goods issue for 201,261(maintenance orders) it is working fine for WA01 but when i am trying to 261(for process order) the system throwing the error message " the system could not create output". i checked with movement type and NACE configuration ..everything fine...
My question is goods issue for process order is WA01 or some other output type...where i am missing guide me.
Thanks
Muthuraman.DHi,
Please check
. Maintained the condition record for the output type. (Transaction: MN21)
. Can you see the output tab page in material document at item level..
Kuber -
Error in process order- availability check
Hi All,
system is throwing error while checking availability in process order creation. it says availability check is not maintained in materials and child component. but it is maintained. apokz field value is 3 for all materials. and it is showing error for all the materials.
while debugging we found there is a field TM00000000010R whose status is inactive.
any clue guys??
thanks in advance!!Dear Ashish,
1.Check if a master recipe exists for the material in C203 and if exists means check the usage and status of the master recipe.
that is value for status as 4 - Released General and usage - 1 - production .
2.If no master recipe exists means then create one using T.Code C201.
3.Then check the impact in COR1.
Regards
Mangalraj.S -
PO error in Process-Order Unit PU not convertible into unit lot of req
Hi ALL,
SRM 5.0 SP13 ECS
Service based req with order unit LOT was pushed to SRM . SC got approved in SRM with order unit LOT, PO got approved with order unit LOT and now the PO is in error in process state. I looked up RZ20 to find the message "Order unit PU not covertible into unit Lot of req. We are using material groups and not material masters.
Any idea what is causing this error? order unit seems to be the same, right though the scenario, It was never tried to change at any point of time in the cycle
Krishnakrishna
update here your findings.it helps others too when they are in trouble.
Muthu -
Error during process order creation
while i create a process order following error is coming "recipe is empty"
please tell me where exactly i'm going wrong.Dear Dhaval,
Welcome Back
Long time heard from you and nice to see your reply from long time
Good Luck !!!
Regards
Madhu -
Confirmation "Error in process"
Limit shopping cart :I have purchase order of 40,000 pounds with order quantity 1(EA) and I have created an Goods receipts/ Confirmations has done of 10,000 pounds with two line item with quantity 1 EA, confirmation is replicated into R3 system with two line items values 5000 each and two Invoice (5000 each) verifications are performed directly in R3.
When the user is doing one more Goods receipts/ Confirmations we are getting an error message
u201CError in processu201D
In EBP we are able to do Goods receipts/ Confirmations, confirmation is not replicating to R3.
From the backend system we are getting an error message u201CError whilst creating an entry sheet in the backend system:PU Ordered quantity exceeded by 1 EA : XXXX u201C
Could you please let me know what will be the root cause of this error?
Either a quantity (1 EA) or once we create an invoice we canu2019t do the confirmation for the Goods receipts/ Confirmations.Hi,
In the path you have mentioned there is Set tolerance settings for the goods receipt for whcih you have tolerance keys defined for you company code as B1, B2 and VP which controls the tolerance for a GR in R3.
Is this the information you are looking for ?
The following variances are checked in Inventory Management:
Variance in the purchase order price quantity
(Explanation)
For this variance, two tolerance keys are provided:
Tolerance key B1 (error message)
You use tolerance key B1 to define the maximum percentage variance. If the variance is greater than the maximum variance, the system creates an error message. The user cannot post the goods receipt.
Tolerance key B2 (warning message)
Tolerance key B2 defines the percentage variance from which a warning message is to be issued. It is possible to post the goods receipt.
Variance for the moving average price of the material
(Explanation)
You use tolerance key VP to define the percentage variance from which a warning message is issued. This warning message indicates a price change
Best regards,
Sridhar. -
Process order confirmation error
Hi, i have set backflush in mrp2 view as always backflush for raw mat. when i do order confirmation with cork tcode, order status shows as CNF but raw mats are not withdrawn. pls note that backflush indicator is also copied in order. do i need to issue mats manually thru mb1a? what could be the reason.
Hi,
Check in the confirmation parameters for process order
in the Process control field
Also check in the BOM item details screen for the raw material
storage location is mentioned.
Regards,
nandha -
Process Order accepts Confirmation & GR from BAPI even after Confirmed
No matter what i try the formatting and CRLF go for a toss in this text.
Hi PPPI Gurus,
I am a beginner in this area and request your help.
We are implementing a project where the process order Confirmation in SAP ECC 5.0 in SAP PPPI module is done using xMII which call the BAPI_PROCORD_CREATE_TT RFC.
The customer wants to (certain times) do a final confirmation without actually completing the order e.g if the Order Qty is 100 then, they want to just manufacture 25 and then do a final confirmation, after which SAP GUI screen does not allow any Process order Confirmations against that process order.
We are using the BAPI_PROCORDCONF_CREATE_TTRFC to do multiple PO Confirmations and GR for particular Process order. Below is a scenario
Case 1:
1. Order Qty =100 ( Unlimited Delivery is not checked and tolerance is Zero).
Which means only 100 is accepted.
2. 100 Quantities are produced and confirmed using the BAPI_PROCORDCONF_CREATE_TT (with Final confirmation value as 1 , which mean auto confirmation)
3. Next when the BAPI confirms & GR's against the same order, the Complete qty is not visible in the COR3 status. And is visible only in the COGI transaction.
That is expected behavior. and i am ok with that.
Case 2: (The one with the problem)
1. Order Qty =100 ( Unlimited Delivery is not checked and tolerance is Zero).
Which means only the 100 is accepted.
2. 25 Quantities are produced and confirmed using BAPI_PROCORDCONF_CREATE_TT (with Final Confirmation value as X , which mean Final confirmation)
3. The Confirmation and GR go through and the status of the process order now changed is CNF and the Deliverd qty is 25.
At this point , if you logon to SAP GUI and try to make a process order confirmation you get an error messages which says the Process Order is already confirmed and no more confirmations or GR can be done against this Process order.
4. But when you Again Run the BAPI_PROCORDCONF_CREATE_TT, it goes ahead and confirms and makes the GR for that Process order.
The Expected Behavior should have been that this quantity is now in the COGI transaction.
5. The Process order allows any number of Further confirmations till the Ordered Qty and Delivered quantity are same .
so dear gurus I know i have written a very long doubt but would be very happy to get a response from you. I would ideally not like to enhance or change the BAPI and want to understand if I have missed some setting or parameter that I have to pass in the BAPI for the final confirmation so that once the Status of the Process order is CNF , no more Confirmations are allowed even from the BAPI.
Thanks in Advance.
Regards
Suraj
Edited by: surajprabhu on Aug 17, 2009 6:37 AMHi,
The standard SAP will allow the GR even after the Final Confirmation. The Final Confirmation is acting as a agent to change the status of the process order to CNF. thats all.
If you want to restrict the GR then you have to do Enhancement with use the USer Exits. Pleas try to use the User Exits PPC00009 or MBCF0001,MBCF0005
thanks and regards
murugesan
Maybe you are looking for
-
Every time I try and update my software version for my iPod touch from version 4.2.1 to version 4.3.5 I get within .5 MB (409.5 of 409.6MB) to the end and an error pops up telling me that my network connection has timed out so that the update could n
-
How to use an available field more than once to define an unique field?
At the table level in the console you can indicate various combinations of fields that must be unique either individually or in combination. However, you can assign an available field only once, individually or in combination. For our data model it
-
<pre><i>Locking duplicate thread. Please continue here: [[/questions/972218]] </i></pre> It does not have sound. It also takes a very long time to open a link. Most of the time the little timer just runs fir ever until you click on it then you see a
-
Oracle Coherence*Web and BlazeDS: Multiple FlexSessions created for the same HttpSession
Hi all, I have searched this forum and found a lot of good information from Alex Glosband and others about the infamous "Detected duplicate HTTP - based FlexSessions, generally due to the remote host disabling session cookies. Session coolkies must b
-
newbie here..was wonderin if i can do this..i got mac book pro laptop..and i want 2 use the cam it has and record into soundtrack the voice and movie from it...then transfer it into logic pro 8...can i do it?...and how?