Confirmation Error - Notification E CRMSERV_ACC_EXEC 006

Hello -
Please advise on the following situation: I have created an HR record for an internal service technician in SAP R/3 4.7. I have linked this record to CRM 7.0 through the BP record. When I assign the technician to the confirmation and save at Completion, I get the error Notification E CRMSERV_ACC_EXEC 006, only when confirming orders with materials. Service Labor confirmations have no issues.
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
Transmission log
No customer could be determined for technician with personnel number 00006834 (Notification E CRMSERV_ACC_EXEC 006)
Enter a customer for special stock W (Notification E M7 072)
Has anyone encoutered similar issues?
Regards,
Guy

Thank you for the tip PePe, the note solved our issue.
Regards,
Guy

Similar Messages

Getting error notifications about payment every month

I get repeatedly notifications about payment information and finally the payment succeeds without changing even the information. Anyway the system doesn't accept correct address information and suggests abbreviated forms of billing address. The problem doesn't seem to be independent about the credit card used because I have tried four different cards.
Yesterday I got once again error notification about payment (Action requirement: ...payment is past due). I the night I got "Thank you for your order" and payment confirmation and today again notification about the payment error.
I don't know how to correct the information to make this work.

tero ylonen, John is correct as you need to contact Adobe Support to get this corrected however I checked & found that you or your bank might have laid a restriction in making the payment for this Adobe product.
Regards
Rajshree

Illustrator CS4 error notification: "Error Loading Plugins. PhotoshopImport.aip"

I am working on a Mac 10.10 Yosemite with Adobe Illustrator CS4 however every time I try to open Illustrator it brings up error notification: "Error Loading Plugins. PhotoshopImport.aip". I can't click on the OK button and the only thing I can do is force quit the application. How do I solve this problem so I can work on my files again?

I have found the solution in another forum that finally seems to have worked!
The last comment I haven't yet experienced as I quit photoshop and was still able to open illustrator without problems and without the help of photoshop afterwards.
But happy for now that this works.
OK, had the same issue, found a work around, not a fix.
1     Force quit Illustrator.
2     Start Photoshop CS4
3     Start Illustrator CS4
4     when you get the alert popup, with Photoshop now open, it allows me to click on "don't show again", and click "OK"
5     quit Photoshop
Now Illustrator should continue to work so long as it is open.
Illustrator will continue to freeze on start unless you 1st open Photoshop.

Inbound Idoc error notification. Help needed

Hi Gurus,
Sorry, maybe it's a silly question.
I have a requirement to send an email when occurs any kind of error at inbound processing. The dest. of this mail must be the postprocessing agent from partner profile (WE20) of the message.
I have standard and custom process codes.
I've followed notes 44416 and 11610 but it still doesn't works.
Somebody knows how can I achieve that?
Thanks in advance,
David Gimeno.

Thanks to all, but it still don't works.
J&Y: this report is necessary to process error Idocs? As I understand, notifys an alert message if a max number of error idoc is reached.
I've done the following things:
- Define custom message type (WE81)
- Bind message (custom) with Idoc type (standard) (WE82)
- Define FM with message type (we57)
- Define FM attributes (BD51)
- Define Process. Code (WE42)
- Define Partner profile with my custom Process Code.
I've tried to link my custom process code with an Standard Object (IDOCAPPL and IDOCPACKET) at BD67, but system brings me the message B1405 Application object type is not planned .
I've defined all tasks at http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b81b943d711d1893e0000e8323c4f/frameset.htm as standard tasks, and I've assigned it to a Org. Structure.
Finally, I enter an Idoc with an error wich brings to Idoc status 51 but I have no error notification. (I've found at SWI1 but no work item is generated).
Does anyone knows what I'm doing wrong, or what else can I do?
Thanks all in advance!!!!

How to send the Error notification

Hi,
Hi,
I am having the one scenario like , i send the one record to destination using outbound that time i stored in one table sent time and date and they are send the ACK to me that time i update the table with receiving time and date using inbound program but now this enhancement is to check the receiving time and sent time if it more than 5 hrs i need to send the Error notification this process is doing every 15minst in background mode please suggest in this issue.
Thanks,
Harinath

Hey
please have a look at the following
How to trigger alert in XI from a connected SAP R/3 4.7 system
Thanx
Aamir

HR Self-Service Transactions - error notifications

In our HR system we are using Administrator Self Service, allowing staff to make changes to HR records for people they manage.
In quite a few cases, our central admin team are receiving notifications with subject lines like:
Application Error has occurred in your process Change Job and Terms performed on Bloggs, Mr Joseph
When opening the notification, the error message at the top of the page says a range of things, such as:
The changes were not applied because This transaction has failed because the employee's record or eligibility status has changed. Submit a new transaction.
Another user has updated this person's record. Please reject the transaction so the initiator can check whether the change is still valid for the updated record.It would seem that the cause of these is because between the HR Self Service transaction being submitted and the error notification going out, something has changed on the HR record in question.
Is there any way I can work out where that change is being made, or is that too hard?
I can see the HR Self Service Transaction via:
SELECT   hat.creation_date hrss_tx_date
       , wn.notification_id nid
       , wn.begin_date notif_date
       , wn.status
       , wn.item_key
       , REPLACE(
            wn.subject
          , 'Application Error has occurred in your process '
         ) subject
       , fu.user_name originator_uname
       , papf3.full_name hr_record_being_changed
       , fu.description originator_description
       , papf.full_name originator_full_name
       , papf2.full_name manager_full_name
       , fu2.user_name manager_login
       , fu2.description manager_description
    FROM applsys.wf_notifications wn
       , applsys.fnd_user fu
       , applsys.fnd_user fu2
       , hr.hr_api_transactions hat
       , hr.per_all_people_f papf
       , hr.per_all_people_f papf2
       , hr.per_all_people_f papf3
       , hr.per_all_assignments_f paaf
   WHERE hat.item_key = wn.item_key
     AND hat.created_by = fu.user_id
     AND papf2.person_id = fu2.employee_id
     AND hat.creator_person_id = papf.person_id
     AND papf.person_id = paaf.person_id
     AND paaf.supervisor_id = papf2.person_id
     AND hat.selected_person_id = papf3.person_id
     AND SYSDATE BETWEEN papf.effective_start_date AND papf.effective_end_date
     AND SYSDATE BETWEEN papf2.effective_start_date AND papf2.effective_end_date
     AND SYSDATE BETWEEN papf3.effective_start_date AND papf3.effective_end_date
     AND SYSDATE BETWEEN paaf.effective_start_date AND paaf.effective_end_date
     AND recipient_role = 'HRMS_DEV_ROLE'
     AND subject LIKE 'Application Error%'
     AND wn.notification_id = :nid
ORDER BY wn.begin_date DESC;But if I look at e.g. the per_all_people_f or per_all_assignments_f tables to look for changes made to the same HR record that the Self-Service transaction was for, nothing recent is returned:
SELECT   papf.employee_number
       , paaf.assignment_number
       , paaf.object_version_number paaf_ovn
       , papf.creation_date papf_creation_date
       , papf.last_update_date papf_last_update_date
       , paaf.creation_date paaf_creation_date
       , paaf.last_update_date paaf_last_update_date
       , papf.object_version_number papf_ovn
    FROM hr.per_all_people_f papf
       , hr.per_all_assignments_f paaf
   WHERE papf.person_id = paaf.person_id
     AND papf.full_name LIKE :pn
ORDER BY paaf.last_update_date DESC;I have seen stuff on My Oracle Support about "object version number" e.g. 1300998.1 says:
"This is an expected behavior. Since after first approval the object version number of contact's personal details has changed. Now when you try to approve second notification we will compare the OVN in transaction tables to the OVN in database (which got changed). Hence we get an object version mismatch and above error."However, I am still stuck trying to see what has changed. I need to find this so I can go to the functional people who don't understand why they are getting the error notifications, so say "Look, this has changed since the Self-Service transaction was submitted, hence the error".
Any advice would be much appreciated.
Thanks

Hi,
In the end I wrote some SQL which identified the fact that the HR tables had been updated in Core Apps AFTER a Self-Service transaction had been started.
SELECT distinct hat.creation_date workflow_start
       , wn.notification_id nid
       , (SELECT MAX(last_update_date) FROM hr.per_all_assignments_f paaf2 WHERE paaf2.person_id = papf3.person_id) last_assig_update
       , wn.begin_date error_date
       , wn.begin_date - (SELECT MAX(last_update_date) FROM hr.per_all_assignments_f paaf2 WHERE paaf2.person_id = papf3.person_id) dd
       , wn.item_key
             , SUBSTR(
                  wn.subject
                , 48
                , INSTR(SUBSTR(wn.subject, 48 + 2), 'performed on ')
               ) transaction_type
             , CASE
                  WHEN SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) LIKE '%Miss%' THEN REPLACE( SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) , ' Miss' , '' )
                  WHEN SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) LIKE '%Mrs%' THEN REPLACE( SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) , ' Mrs' , '' )
                  WHEN SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) LIKE '%Ms%' THEN REPLACE( SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) , ' Ms' , '' )
                  WHEN SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) LIKE '%Mr%' THEN REPLACE( SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) , ' Mr' , '' )
                  ELSE SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 )
               END performed_on
       , wn.subject
       , papf3.full_name
       , papf3.employee_number empno
       , fu.user_name by_un
       , fu.description by_desc
       , papf.full_name by_name
    FROM applsys.wf_notifications wn
       , applsys.fnd_user fu
       , hr.hr_api_transactions hat
       , hr.per_all_people_f papf
       , hr.per_all_people_f papf3
       , hr.per_all_assignments_f paaf
   WHERE hat.item_key = wn.item_key
     AND hat.created_by = fu.user_id
     AND hat.creator_person_id = papf.person_id
     AND papf.person_id = paaf.person_id
     AND hat.selected_person_id = papf3.person_id
     AND SYSDATE BETWEEN papf.effective_start_date AND papf.effective_end_date
     AND SYSDATE BETWEEN papf3.effective_start_date AND papf3.effective_end_date
     AND SYSDATE BETWEEN paaf.effective_start_date AND paaf.effective_end_date
     AND subject NOT LIKE '%Phone Numbers%'
     AND recipient_role = 'HRMS_DEV_ROLE'
     AND subject LIKE 'Application Error%'
     AND papf.current_employee_flag = 'Y'
     AND paaf.assignment_type = 'E'
ORDER BY 1 DESCIt helped compare things in the background and prove in our case that there wasn't a system problem.
Thanks

Error notification for process

Hello
I have a pl sql process, and catch an exception in the code.
If the Process ready and is an exception thrown I get an success- instead of an error notification.
How I can activate the error notification after catching exception?
thanks for any help
markus

Markus - the error text you set for the process is displayed only if the process itself fails. If you handle errors within it, the process succeeds and you get the success message.
I'd be interested to hear what others are doing, but we have done this kind of thing:
Create a hidden page item, e.g. P1_MESSAGE.
Set the value of that item from within your PL/SQL process, e.g:
exception
when others then
:P1_MESSAGE := 'Error text here';
end;The set the success text to &P1_MESSAGE. (with the trailing full stop).
Does that do what you want?
John.

Inbound EDI error notification - processing Work Items

I am testing the inbound error notification. How do you change an IDoc from work item. The work item only allows you to display the IDoc, not change it. Which trans to change IDOC for reprocessing?

Do you correct the IDOC tru WE19 (test tool)?

Error Notification message checksum content error in APEX 4.2

Hi,
We are Getting "Error Notification message checksum content error" when somebody enters wrong password in one of our installations after upgrade to 4.2
Installation -- OEL 5.5 --> Oracle 11g --> Apex 4.2 --> Weblogic 10.3.4
I understood from other threads, that problem is lying somewhere in apex 4.2 new feature (ajax wait count down), because i get below url in browser
https://<url>/pex/fp=117:101:954676091282&notification_msg=Invalid%20Login%20Credentials%3Cdiv%20id%3D%22apex_login_throttle_div%22%3EPlease%20wait%20%26lt;span%20id%3D%22apex_login_throttle_sec%22%26gt;10%26lt;%2Fspan%26gt;%20seconds%20to%20login%20again.%3C%2Fdiv%3E/7179423A7E6DAB93CBFA46F23FBCF804/
However i have similar other installations, where i do see the correct error message(Incorrect Login Credentials, Please wait for <n> seconds).
Also i have seen that on other thread somebody giving solutions for similar error in Apache installation, but i couldn't find any for Weblogic installation.
Please help me on this.
Edited by: user9128312 on Dec 17, 2012 6:38 PM

Hi,
I just checked this on apex.oracle.com and can see both the 'Error Handling' 'sub tab' and the relevant region on the page with attributes for 'In-Line Error Notification Text' and 'Error Handling Function'. This is on the 'Edit Page' page in the builder (4000:4301). Is this the page you are on and are you still not able to see this?
Regards,
Anthony

How to clear ERROR Notifications in SYSADMIN User

Hi,
version is : 11.5.10.2
and DB is 9.2.0.7 runing on HP-UX Itanium
We have lot of (45000) error notifications lying in SYSADMIN user.
Can anybody suggest the best procedure to clear them out ? I dont want to delete one by one. I want to clear them at single shot. Please advise

Hi;
Please see below notes:
SYSADMIN User Gets Thousands of WFERROR Notifications [ID 1299167.1]
How To Remove Error Notifications From The Worklist [ID 357904.1]
Also see:
workflow purge
How to purge old workflow alerts
Regard
Helios

What values in EBM Header maps to error notification entry in AIA console

Hi Guys,
Can any one tell me which values of EBM Header maps to error notification entry in AIA console for sending notification to user created ?
What elements in EBM Header maps to this fields *(SYSTEM CODE, ERROR CODE, SERVICE NAME, and PROCESS_NAME)* in Error notification in AIA Console for sending notification to a particular user other than AIAIntegrationAdmin?

Hi Gerhard,
I tried to send notification using feature available in AIA FP whenever remote and binding fault happened to user SysAdmin creatred in Admin console under user & groups.
I have done the below configuration
1. Made entry in AIA console under error notification (Error code : blank service name: SampleBpel system code : sys process name: SampleBpel Role: SysAdmin FYIRole: SysAdmin).
2. configured email driver properties and work flow notification properties.
3. made entry in http://localhost:7001/sdpmessaging/userprefs-ui/ with user logged in SysAdmin and entered mail-id.
4. Populated EBM Header with the below values
<part name="AIAFault">
<Fault>
<EBMReference>
<BusinessScopeReference>
<InstanceID>SampleBpel</InstanceID>
</BusinessScopeReference>
<SenderReference>
<ID>SYS</ID>
<ObjectCrossReference/>
<Application/>
</SenderReference>
</EBMReference>
<B2BMReference/>
<FaultNotification>
<FaultMessage>
<Code/>
<Text></Text>
<Stack></Stack>
<IntermediateMessageHop/>
</FaultMessage>
<FaultingService>
<ID>SampleBpel</ID>
<ImplementationCode>BPEL</ImplementationCode>
<InstanceID>10011</InstanceID>
<ExecutionContextID>480626c0ac4cb5bd:-64972e88:13bb690ac70:-8000-0000000000010746</ExecutionContextID>
</FaultingService>
</FaultNotification>
</Fault>
</part>
5.Included fault-policies and fault-bindings.xml in project.
when testing the project with negative scenario generates the remote fault. I am able to see fault data i.e EBM Header in AIAReadJMSNotificationProcess.
But it is unable to send notification for the user created (SysAdmin).
It is showing the default user values
Message ID (Recipient)     b89bc86bc0a805f10110c4aa3d93719f (USER:AIAIntegrationAdmin)
Operation     Send
Overall Status     Failed
Status Code     ENGINE_PROCESSING_FAILURE
Status Message     User could not be resolved to device addresses. Please see the log file for details.
Timestamp     Dec 20, 2012 7:28:56 PM IST
Gateway Message ID
Sender
Recipient     USER:AIAIntegrationAdmin
Driver Instance Name
Engine     /Farm_base_domain/base_domain/AdminServer/usermessagingserver
Application Name     soa-infra
Application Instance Name
It is unable to send notification to the user   SysAdmin
Can you provide solution how can i send notification to user created (SysAdmin)?
what are the EBM Header values that need to be populated for sending notification to user created (SysAdmin)?

Device Removal Error Notification

I accidentally stepped on the USB cable of my external hard drive and my computer showed a device removal error notification and that data might have been lost. I know properly ejecting the hard drive clears out the cache, but how can you tell what data was lost. Is it obvious like an entire folder/file would be missing, or would just pieces of data from a file be missing?
Also, it said data MIGHT have been lost or damaged. Is it possible that nothing happened at all?

It could potentially damage multiple files, but I would consider it unlikely. More likely it would damage the disk directory, affecting the entire drive, rather than damage more than the file being written. Again, though, I won't say it's impossible.
I've also tried to run Disk Utility on it to verify the disk, but it says the disk could not be unmounted
Got any software accessing the drive, such as iTunes, iPhoto, or anything else that might have a file open on the drive?
As to your query, what you're seeing seems normal. It's telling you how many files it sees (and "files" do not necessarily equal "documents"; it's what a computer considers to be a file, which can include all sorts of invisible items). As to what "clusters" are, there's a good explanation here:
http://www.dewassoc.com/kbase/hard_drives/clusters.htm
Regards.
Message was edited by: Dave Sawyer

AIA Error Notification Format : HTML Tags

Hi All,
I am trying to customize the AIA Error notifications in AIAEHNotification.xml file to include the html tags such as <font color="blue"> etc. to change the look of the error message. But the same is not getting reflected in the error emails I receive.
I'm sure the file AIAEHNotification.xml is getting updated as I can see my updated content every time but not html formatted in any case.
Does default AIA Error handler support HTML tags inside the email body message or it just uses <pre> by default before sending the notification?
AIA 3.0
SOA Suite 11.1.1.3
Regards,
Neeraj sehgal

Neeraj,
html tags are not supported in the AIA EH notification framework as of now and I am not aware of any plans to support this in any of the next releases.
Gerhard

Error notification

I was trying to access an airlines website and up came an error notification for this website that is locking me out of Safari, it says jCarousel: No width/height set for items. This will cause an infinite loop. Aborting...
Nothing I do allows me to get out of this locked in website. Thanks for anyone's assistance on this.

That's referencing a javascript file (plugin) that evidently Safari on the iOS can't handle. Haven't run into it myself. Check your setting and make sure javascript is turned on (likely it is, but just in case).
You could try another browser, but no guarantee that would work.
Who's site was it, BTW?

Plz urgent alpha non confirmation error

I am getting this errror alpha non confirmation error
solution

Hi naresh kumar ch
Some times it happens because of Preceding Zeros
Just have a look @ the following links..
Re: Alpha non conforming value
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> I am getting this errror alpha non confirmation
> error
>
> solution

Confirmation Error - Notification E CRMSERV_ACC_EXEC 006

Similar Messages

Maybe you are looking for