Confirmation in 'Approved' status.

Hi All,
We are at SRM7.0 and working on extended classic. After a confirmation is created in SRM, it is created in the backend ECC but the status of the confirmation is still showing as " approved" and not "posted in backend".
Please advise.
Thanks

hi,
check in SRM system -T.code: BD87
enter the partner system -ECC  backend
Enter the date and execute
Check for the error message
Regards
G.Ganesh Kumar

Similar Messages

  • SRM 5.0 Confirmation in Awaiting Approval Status

    We have the confirmations in "Awaiting Approval" status.
    I had checked the following steps but still the status remains as-is.
    1. Transaction SWUD
    2. Enter workflow WS10400010, press enter
    3. Execute 'Test environment'
    4. Check 'Including subworkflows'
    5. Execute 'Consistency check for components'
    There are no errors for BUS2203 (Confirmation business object).
    I have cross checked the BUS2203 for WS10400010 Active Status is both T-Codes SWETYPV and SWE2.
    We had a previous issue of BUS2203 with some errors and that went away after following steps in OSS Note and SDN comments. Note 962488 - "Workflow definition '&' not in version '&' (WD 401) and SDN.
    WS10400010 is No Approval Workflow for confirmations that is active and classified as General Task.
    Can you please advise on this status issue?

    Please analyse the Workflow log from SWI2_FREQ. I think you can check this issue in SRM forum. I think this is discussed.
    Thanks
    Arghadip

  • Confirmation ending in Awaiting for Approval Status

    Hi Experts,
    The Confirmation of Goods receipt was working fine till last month. Now For some PO's Confirmation is going to Awaiting for Approval status this is happening only for few PO's and for others PO's Confirmation is happening properly and the status is Posted in Backed.
    I observed that Workitem ID is not created for those confirmation's which are in Awaiting for Approval Status. 
    Please help me resolve this issue.
    Any valuable inputs are Appreciated.
    Thanks and Regards,
    Devananda A J

    Hi,
      First point if you make a GR confirmation means the PO change version will be generated and the PO  workflow will restart for the PO change version.
      Goto BBP_PD  and enter PO number check the PO change version is closed or not. If it is not closed then PO change version workflow will be in Error. If it is in Error then GR confirmation workitem will not be genrated.
    all these things will happen because of if you create a GR confirmation or any changes made to PO when the PO status is still in Transfer status.
    regards,
    Devi

  • Standard Report, for checking the PR approval status by a certain User

    Hello Experts,
                          Is there any standard report in the SAP where we can find out for the given managers, if level 1 approver is Mr. X, then which all has been approved by Mr. X and and pending with subsequent approvers?
    Please help.
    thanks and regards,
    Yawar Khan

    Hi,
    Yes, standard report is available for PR approval status list using T-code ME5A - List Display of Purchase Requisitions and the following input data's are given .
    Purchasing Group                  :    ___
    Scope of List                         :  ALV
    Plant                                       :  _____  (if required)
    -  Assigned Purchase Requisitions to be ticked.
    -  Released Requisition Only to be ticked.
    -  Requisition for overall Release to be ticked.
    -  Requisition for Item-wise Release to be ticked.
    Now execute the report and then report top layout button click for  'Release indicator' option selected for released status confirmation purpose.  If release indicator status is 'X' means PR released, otherwise PR is not released.
    Hope, it is useful for you.
    Regards,
    K.Rajendran

  • Confirnmation in Awaiting Approval Status

    dear SRM gurus
    We are implementing SRM  4.0  and follow the classic scenarios.
    We create PO in R/3  and do a Confirmation for PO in SRM.
    Now when the Employee does the confirmation in the Check status of the SC it Shows Confirmation Awaiting Approval
    Even though no approval is required and we have activated only the WFL
    WS 10400010 Goods Receipt Workflow Without Approval
    and no other work flow is activated.
    More in confirmation option tab Display confirmation all the Confirmation are displayed in the Employees Id as Awating Approval.
    can anyone throw light on this,
    regards,
    Nimish Sheth

    Hello
    Please check the following transaction if you face this type of error.
    1. SM58 tRFC - network error during WF run time
    2. RZ20 - some error in backend
    3. BBP_PD - check the ducument status
    If you could not find the related error, please try this.
    >1. SE38 Run BBP_ALERT_SB_NOTTRANSFERED
    >2. RZ20 check the entry
    >3. Goto Web Application Monitor, re-submit
    Regards,
    Masa

  • Approval Status Report, SBO v2007, current data or cumulative?

    I run the Approval Status Report while logged in as a superuser, selecting
    Document Status: 'Pending',
    no limits set in the To/From middle section,
    all document types ticked,
    and I get a list of document numbers.
    I immediately re-run the Approval Status Report while logged in as a superuser, selecting
    Document Status: 'Generated',
    no limits set in the To/From middle section,
    all document types ticked,
    and I get a list of document numbers that includes some of the 'Pending' status ones from the first run.
    How can the document be in both 'Pending' and 'Generated' status at the same time? Is this report supposed to show me the current status of documents, or all accumulated approval action taken on documents?

    Hi Cindy,
    Document number in approval is not unique.  Same number may refer to more than one document.  All draft documents will only be assigned a unique marketing document number until approved and created.
    That is probably you can see the same number in the 2 reports
    Thanks,
    Gordon

  • Approval Status report

    Dear All,
    One of user not able to remove the rejected report
    from Approval  status report.
    Regards
    Aarati Kollur

    The user is not supper user.
    Yes problem is only that particular user.
    Regards
    Aarati

  • Approval status of PR is in process, but action history show 'Approve'

    Dear all,
    I am on EBS 11.5.10.2 and encountered a problem during the approval process of PR.
    The approval hierarchy with PR is planner -> approver1 -> approver2,
    and approver2 is the final approver.
    Everything of the approval process is OK except that the action performed
    by approver1 shown in Action History is 'Approve', but not the appropriate
    'Forword'.
    Sequence Performed By Action Approval Status
    0 planner Submit
    1 planner Forward In Process
    2 approver1 Approve In Process <---- Here the 'Approve' action should be shown as 'Forward'
    3 approver2 Approve Approved
    Any ideas will be greatly appreciated!
    Regards,
    Henry Huang
    Edited by: user8960428 on 2011-7-7 上午8:13
    Edited by: user8960428 on 2011-7-7 上午8:15

    For requisitions the action taken by the approver is recorded. If they click on Approve, the same is recorded in action history.Shivaraj, for POs with the similar position hierarchy, if the approve1 click on Approve, action history does show 'Forward'.
    Do you mean the action taken by the approver1 is different between Requisitions and POs?
    Edited by: user8960428 on 2011-7-12 上午8:03

  • Update a site column dynamically to Approval Status

    Hello all this is what I have;
    InfoPath form with Form Status field (Form Status promoted to SP form library as site column) form switches to read only view when Form Status = Approved
    SharePoint form library set to require content approval
    Copied and modified OOB Publishing Approval workflow with Association column, Form Status added,
    As it stands, the work flow runs and updates the list item, Form Status, to Approval Status, unfortunately Approval status is set beck to pending (which is correct behavior I assume) I need some help! can I insert the Update list item action in the workflow
    task steps? I want Form status to start as pending and then reflect whatever Approval Status value is.  This is my first attempt at modifying an OOB workflow, is this the right approach?
    Thanks for any help, I have tried several solutions but I am definately missing something. Should the workflow restart on item change? should I have versioning turned on? all I am trying to accomplish is have the form switch to read only if it's approved and
    then if for some reason someone needs to make a change I need Form Status and Approval Status to have the same value.

    Hi,
    If you only want to approve content, you can enable content approval.
    If you want to manage versions, you need to enable content approval first and then enable version.
    More information：
    Require approval of items in a site list or library
    Enable and configure versioning for a list or library
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Approval status at item level

    Hi,
    I need to know whether the shopping cart item is rejected or not.(need to know the approval status at item level) and then make the rejection reason as mandatory.
    I tried to get the value of the flag DEDUCT_IND from each item,but it is never set to 'X' eventhough I reject an item.could anybody please tell me when this flag will be changed or is there any other way to find the approval status at item level.
    Regards,
    Rohini

    What is your SRM Version  ?
    If you have implemented process control workflow for Item level approval, then.
    Once the approver rejects and item, the workflow sends the workitem back to the requester to make changes are accept the rejection. If the requester accepts the rejection then the workflow continues. If the workflow does not have any more approver then the shopping cart is approved and the line item which is rejected by approver is set to DELETE. i.e. BBP_PDIGP-DEL_IND is set to 'X'.

  • Workflow Error Message: System Account - The Workflow could not set Content Approval Status

    This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
    When I start the work flow the following 3 error messages show up:
    Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
    Thank you for your kind guidance.

    Hi,
    For the first error: Did you set Content Approval in the workflow?  If so, see if you have it in the versioning settings of the list settings.
    For the second error: double check your recipient is set up as being valid.  Did you type in the email address or is it referring to a people picker field?  also, make sure that in the workflow for the email that you actually populated it in the
    To: field.
    for the third error: I suspect that either your farm is not configured for email.  Or, this error is a knock on from the second error.  If you get the second error rectified it may clear this error.  If not then double check the email settings
    for your farm.
    Johnathan Lightfoot

  • Approval Status of all the documents which were in 'Approved' state, now showing as 'on going' status after migration to SP 2010.

    Hi There,
    I have recently migrated my SharePoint 2007 portal to SP2010, However, to my surprise  i have noticed all the documents in different document libraries are having 'Approval status' as 'On going' status which suppose to be 'Approved' status.
    I mean, before migration all the documents status was 'Approved' and after migration it is showing as 'on going'.
    This is absolutely incorrect, can someone help in this.
    How can i retain all the documents status as 'Approved'
    Regards
    Vikram P
    vikram padigala

    Hi There,
    I have recently migrated my SharePoint 2007 portal to SP2010, However, to my surprise  i have noticed all the documents in different document libraries are having 'Approval status' as 'On going' status which suppose to be 'Approved' status.
    I mean, before migration all the documents status was 'Approved' and after migration it is showing as 'on going'.
    This is absolutely incorrect, can someone help in this.
    How can i retain all the documents status as 'Approved'
    Regards
    Vikram P
    vikram padigala

  • Possible values for AP Invoice Approval Status  in fnd_lookups

    Hi,
    I have a EBS system deployed which is currently like a black box for me and iam doing some reporting on the top of it.
    i need to find out the possible values of AP Invoice Approval Status in fnd_lookups , fnd_lookup_values or some other tables Defined in that system.
    Something like the below is use for employee expense status
    SELECT LOOKUP_CODE FROM FND_LOOKUP_VALUES WHERE FND_LOOKUP_VALUES.LOOKUP_TYPE= 'EXPENSE REPORT STATUS' AND FND_LOOKUP_VALUES.LANGUAGE = USERENV('LANG')

    Please see if Oracle Payables Guides available at http://www.oracle.com/technetwork/documentation/applications-167706.html helps.
    Thanks,
    Hussein

  • Po approval status is showing as Incomplete

    Hi,
    Can anyone please guide me in getting po approval status as approved.Iam a beginner in oracle apps.Is there anything to be done with oracle workflow related to po approval for getting the PO status as approved. Iam getting the sent notification from clerk log-in in notification summary.but the approved notification in notification summary is not changing to approved status in navigation->po/po eventhough manager is approving the notification.I set the security option as public.
    Latha

    Hi JayaChandra,
    Even I am facing the same problem. I Created a 'PO Requsition' .It is Approved and after that I am 'Auto Creating' a PO from the 'Requisition' approved .
    But I am unable to approve the PO that is created.I am approving by myself and I am not forwarding it.The Status is showing 'InComplete'. But I am Able to Approve a 'Manual PO' but unable to approve 'Auto Create PO'. I dont know the problem and the approval limits are set properly.
    Thanks in Advance,
    D.V.Narasimha Rao

  • Custom report for Workflow approval status

    Hi Friends,
    For one of my custom workflow the client needs a custom report to know the approval status. This custom workflow will be a multilevel approval and they want to know the status based on the object key(document number) like who has approved it at what time, who else has to approve etc which standard workflow tables can be used for this? Please advice.

    >
    sapient wrote:
    > Solved as per Arghdip,Martin and Mike's Suggestions.
    Thanks for the update, but how is this possible if two of them are completely different solutions? 
    This is a tecnical forum, accuracy is key. The word "and" doesn't really work in the above statement.

Maybe you are looking for