Confirmation of all operations.

Hi Gurus
Is it necessary to have CNF status for all operations in Production order.?
Can we add mor activities to already confirmed operation?
Can we closed production order without all confirmed operations?

Hi,
Q.Is it necessary to have CNF status for all operations in Production order.?
A. You can have PCNF for some opearions or neither have CNF nor PCNF all possible.
Q. Can we add mor activities to already confirmed operation?
A. When you realased the order you can use option read master data and can change the master data but once you issued material or did the confirmation then you can not change the master data for that particular production order.
Q.Can we closed production order without all confirmed operations?
A. Yes you can closed or Teco the production order with out conirming the all operations.
Regards,
Farman

Similar Messages

Confirmation for sub-operation

Hi Expert,
As we know that confirmation has to be maintaned for each work order confirmation.
Current condition, we also have to maintained confirmation for each work order sub-operation.
Is there any possibility that only operation level of work order that need to be confirmed? instead of sub-operation level? in assumption that work order created with both operation and sub-operation
illiustration:
Operation 0010 Greasing
Sub operation 0010/0011 cleanning
Sub operation 0010/0012 inspection
Confirmation conducted for operation 0010 Greasing only, instead of all operation and sub operations
Thanks
Pls Help
Rgds

Leni,
There is nothing in the standard system that would force you to create confirmations at either operation or sub-operation level (unless you have done something in your system)
PeteA

Good Movement at the confirmation of an operation

Dear All,
I tried to make good movement when I maked an confirmation for an operation.
I configured whit TC: OPK4 automatic good movement and whit TC: OP67 I choosed option automatic good movement for control key.
However, when I maked an confirmation (TC: CO1F), the system didn't propose the material from BOM, for issues, or the finished good to get in stock.
And an additional question: if I have many operations on the routing and each of them have the same control key (PP01, for example) the system cannot accept any automatic good movement.
What can I do in this case?
Thank you very much for the answers.
Regards,
Marian

Hi,
You are trying progress confirmation right...
As per my knowledge for production order confirmation you could findth egoods movement...
in CO15 or CO11N...
For th e second question if u have N number of operations then you could confirm operation wise in CO11n and for first operation goods issue and for the final operation goods recipet will happen
Regards,
sravanthi
Edited by: Sravanthi683 on May 21, 2009 10:34 AM

Error while Posting to all operative areas

hi,
while posting to all operative areas in TBB1 am getting the following error
"No accounting rule despite posting to general ledger ERP" for valuation area 002. Whereas no error for operative valuation area 001.
Please help.

Hi Sur,
the long text SAP note 922332 explains what to do in this case: is there an accounting principle assigned to all of the relevant valuation areas for the accounting code in IMG under 'Assign Accounting Codes and Valuation Areas'?
Best regards,
Marie
SAP TRM

Failed to load WMSchApi.dll. Error 1114 All Operation disabled

We currently have a large number or workstations that have imported fine, we
can view diag info but are unable to use any remote control functionality.
Below is an extract from the zen remote log file which shows a failed load
off wmschapi.dll and a critical error .
Anybody got a fix that can be automated
Thanks
Scott
We're using the ZFD agent from IR4 patch which is working fine on other PCs,
all 49 SP2 clients, W2K SP4.
#(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(660)# 16:59:50 11/24/04 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(660)# 16:59:50 11/24/04 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(660)# 16:59:50 11/24/04 Normal : Console version is SP1
#(660)# 16:59:50 11/24/04 Critical : ZenRmServer: Failed to find
Console Version #0.6.5.1 in supportability list
#(660)# 16:59:50 11/24/04 Warning :
RMAudit::Auditing.cpp:RMSesstionStart() The audit log file is not found.
#(660)# 16:59:50 11/24/04 Normal : ZENUtil:
ZENIsWorkstationRegistered: wsDN 'CN#(660)# 16:59:50 11/24/04 Normal :
Workstation is registered
#(660)# 16:59:50 11/24/04 Normal : ZENNDSUtil: Attempting to read
policies...
#(660)# 16:59:50 11/24/04 Normal : ZENUtil:
ZENIsWorkstationRegistered: wsDN 'CN#(660)# 16:59:50 11/24/04 Normal :
Workstation is registered
#(660)# 16:59:50 11/24/04 Normal : Reading workstation DN and tree
name...
#(660)# 16:59:50 11/24/04 Normal : workstation DN -
CN
#(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(660)# 16:59:50 11/24/04 Critical : ZENNDSUtil: Failed to load
WMSchApi.dll. Error: 1114
#(660)# 16:59:50 11/24/04 Normal : Reading workstation DN and tree
name...
#(660)# 16:59:50 11/24/04 Normal : workstation DN -
CN
#(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(660)# 16:59:50 11/24/04 Critical : ZENNDSUtil: Failed to load
WMSchApi.dll. Error: 1114
#(660)# 16:59:50 11/24/04 Normal : Neither policy settings active.
All operations disabled.

> We currently have a large number or workstations that have imported fine, we
> can view diag info but are unable to use any remote control functionality.
>
> Below is an extract from the zen remote log file which shows a failed load
> off wmschapi.dll and a critical error .
>
> Anybody got a fix that can be automated
>
> Thanks
>
> Scott
>
> We're using the ZFD agent from IR4 patch which is working fine on other PCs,
> all 49 SP2 clients, W2K SP4.
>
>
> #(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenLite.dll
> #(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenPol32.dll
> #(660)# 16:59:50 11/24/04 Normal : ZENNDSUtil: Successfully loaded
> dependent modules...
> #(660)# 16:59:50 11/24/04 Normal : LoadZenAutilLibraryAndGetProc:
> Successfully loaded ZenAutil.dll and its dependent DLLs
> #(660)# 16:59:50 11/24/04 Normal : Console version is SP1
> #(660)# 16:59:50 11/24/04 Critical : ZenRmServer: Failed to find
> Console Version #0.6.5.1 in supportability list
> #(660)# 16:59:50 11/24/04 Warning :
> RMAudit::Auditing.cpp:RMSesstionStart() The audit log file is not found.
> #(660)# 16:59:50 11/24/04 Normal : ZENUtil:
> ZENIsWorkstationRegistered: wsDN 'CN#(660)# 16:59:50 11/24/04 Normal :
> Workstation is registered
> #(660)# 16:59:50 11/24/04 Normal : ZENNDSUtil: Attempting to read
> policies...
> #(660)# 16:59:50 11/24/04 Normal : ZENUtil:
> ZENIsWorkstationRegistered: wsDN 'CN#(660)# 16:59:50 11/24/04 Normal :
> Workstation is registered
> #(660)# 16:59:50 11/24/04 Normal : Reading workstation DN and tree
> name...
> #(660)# 16:59:50 11/24/04 Normal : workstation DN -
> CN
> #(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(660)# 16:59:50 11/24/04 Critical : ZENNDSUtil: Failed to load
> WMSchApi.dll. Error: 1114
> #(660)# 16:59:50 11/24/04 Normal : Reading workstation DN and tree
> name...
> #(660)# 16:59:50 11/24/04 Normal : workstation DN -
> CN
> #(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(660)# 16:59:50 11/24/04 Critical : ZENNDSUtil: Failed to load
> WMSchApi.dll. Error: 1114
> #(660)# 16:59:50 11/24/04 Normal : Neither policy settings active.
> All operations disabled.
>
>
Just to support the previous person who also replied to this question. We
had the same problem and it was the path. Someone pushed an app that
replaced the path instead of appending to it and it killed the zen remote
agent. Replacing the path to "c:\program files\novell\zenworks" path worked.
Thanks much for the person who first suggested this.
Neal...

Restrict system from doing re-confirmation of all line items in SO

Hello SDNs,
When we change the quantity of one line item, system is going for re-confirmation of all line items.
when there are multiple line items, it is having perfomance problem. Now we want to change this to go for re-confirmation of only the changed line item. Please suggest me how to move ahead.
Regards
Hari

Hi,
what you are willing to implement is not a supported functionality in the current Yard management.
If this is not yet the case, I would encourage you to open a SAP Customer message so that your question gets checked and analysed at development support.
BR
Alain

VSS Error: "An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes."

Hi all,
at a customer’s site I’ve a problem with a fresh installation of Backup Exec 2014. Every backup (full or incremental) always reports the following
error: “An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes.”.
It’s not a Backup Exec problem itself, also backups using “Windows Server Backup” failing with the same error.
On this site I have three servers; the error is only generated for one of them. Here’s a short overview:
Server1: Windows Server 2012 R2, latest patchlevel, physical machine, Domain Controller and Fileserver. Backup Exec is installed on this machine,
backup is written directly to SAS tape loader. There error is generated on this server.
Server2: Windows Server 2008 R2, latest patchlevel, virtual machine, running on Citrix Xen Server 6.2. Used for remote desktop services, no errors
on this server.
Server3: Windows Server 2012 R2, latest patchlevel, virtual machine, database server with some SQL Instances, no errors on this server.
As I said, error is reported only on server1, no matter if it is a full or an incremental backup. During the backup I found the following errors
is the event log (translated from a german system):
Event ID: 12293
Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider. "{89300202-3cec-4981-9171-19f59559e0f2}" an error occured. Routinedetails Error calling Query(). [0x80042302] [hr = 0x80042302, unexpected component error of
the Volume Shadow Copy Service.
Process:
Volume Shadow Copy polling
Volume Shadow Copy delete
Context:
   Executioncontext: Coordinator
   Executionkontext: Coordinator
And
Event ID: 8193
Volume Shadow Copy Service error: Unexpected error calling Routine "IVssCoordinator::Query" hr = 0x8004230f, Unexpected error Volume Shadow Copy Service Provider
Process:
Volume Shadow Copy delete
Context:
   Executioncontext: Coordinator
There are some articles about this error in the knowledge base or web which does not help or do not apply to my environment for example:
http://www.symantec.com/business/support/index?page=content&id=TECH38338&actp=search&viewlocale=en_US&searchid=1423724381707
What I already have tried:
Disabled Antivirus during the whole backup
Installed latest Service Pack for Backup Exec
Rebooted the server
vssadmin list writers do not show any errors
consult eventid.net for other possible solutions
no limits set for vaa
Anymore ideas from you guys?
Best regards,

Hi Shaon,
vssadmin list providers gave the following output:
vssadmin list providers
vssadmin 1.1 - Verwaltungsbefehlszeilenprogramm des Volumeschattenkopie-Dienstes
(C) Copyright 2001-2013 Microsoft Corp.
Anbietername: "Microsoft File Share Shadow Copy provider"
   Anbietertyp: Dateifreigabe
   Anbieterkennung: {89300202-3cec-4981-9171-19f59559e0f2}
   Version: 1.0.0.1
Anbietername: "Microsoft Software Shadow Copy provider 1.0"
   Anbietertyp: System
   Anbieterkennung: {b5946137-7b9f-4925-af80-51abd60b20d5}
   Version: 1.0.0.7
Unfortunately theres not Symantec VSS Provider listed.
Best regards,
Christoph

Block Material for all operations

Hi gurus,
I need block a material for all operations. In material master, field X-plant matl status is ok with all possible blocks that system offers. But, I can still do inventory, and other operations...
How Can I block for all operations a material???
Thank you
I will reward with points all answers

In IM it is possibel to block but in WM it isn't (according to my best knowledge).
WM-inventory > block WM inventory booking of materials that are out of use
http://www.sapfans.com/forums/viewtopic.php?f=6&t=291342
Edited by: Csaba Szommer on Jun 12, 2008 11:43 AM

Print Confirmation Form: All Plans

Dear Experts.
I want know What is the name of the service(link) that is closed in the box green for put this service out in a subarea. In this moment this service is a link in the iView of Benefits Participation
Attach Image following:
[Print Confirmation Form: All Plans|http://www.freeimagehosting.net/uploads/312757289a.jpg]
Thank in advance for your help.
Best Regards
Juan.

Dear Suresh
I checked the Views V_T7XSSSERSAR & V_T7XSSSERSARC using SM31 in the backend, but I don't found a service assign to Subareas with Text "Print Confirmation Form."
I also check the view V_T7XSSSERVSRV and not exits a service with Service Link Text "Print Confirmation Form..."
Can I put this service as a link in a Subarea?
Thank in advance for your help,
Best Regards
Juan

ANY,ALL operator ....

Hi ,
Can you show the difference between ANY and ALL operator in Oracle10g...?????
I have written the following two sets of sql queries against the emp table of SCOTT schema.... The results were not different....
select ename from emp where sal>any(select min(sal) from emp)
select ename from emp where sal>all(select min(sal) from emp)
and
select ename from emp where sal>any(2000,2200)
select ename from emp where sal>all(2000,2200)
In pairs the results are the same.....
In the Oracle Doc there are the following notes.....
ANY
Compares a value to each value in a list or returned by a query. Must be
preceded by =, !=, >, <, <=, >=. Can be followed by any expression or
subquery that returns one or more values.
Evaluates to FALSE if the query returns no rows.
ALL
Compares a value to every value in a list or returned by a query. Must be
preceded by =, !=, >, <, <=, >=. Can be followed by any expression or
subquery that returns one or more values.
Evaluates to TRUE if the query returns no rows.
Many thanks....
Sim

Or simply:
sal > any(100,200) means salary greater than ANY of the entry in the list.
Means greater than the least.
<br>
sal > all(100,200) means salary greater than ALL of the entry in the list.
Means greater than the greatest.
Taking AVG(SAL) as 100:
select ename from emp where sal>any(select avg(sal) from emp) =>
sal > ANY(100) =>   sal > 100
<br>
select ename from emp where sal>all(select avg(sal) from emp) =>
sal > all(100) =>   sal > 100
They means samething, so same result.
So if the list contains only one entry, ANY and ALL means the
same.Moreover in that case you dont need ANY or
ALL.Simply the comparison operator will do the samething.

Profile Option: HZ: Display Accounts for All Operating Units

I just noticed this profile option, but cannot find any documentation stating what it does. Does anyone know? Offhand, it sounds like the customer account is now org-striped, in addition to the sites, but I don't see any other evidence of this.
Thanks.

Have you looked at note 369821.1.?
It says,
If you want to review all of the Quotes for all organizations then you need to set the profile "HZ: Display Accounts for All Operating Units" to "Yes" at the site level. After that you will be able to see all the transactions in OCO for all organizations. Sandeep Gandhi

HT4847 How do I confirm that all my Numbers documents have been backed up on iCloud? I want to be able to see what has been backed up.

How do I confirm that all my Numbers documents have been backed up on iCloud? I want to be able to see what has been backed up.

On your computer go to iCloud.com, sign in and select the documents app.
On your iPad go to Settings>iCloud>Storage & Backup>Manage Storage and your documents should be listed.
If you are referring to an iOS device backup it is not possible to view these.

Goods Receipt Production Order before all operation done

Hi PP Expert,
I have 5 operation :
Op 10 Expedition A-B
Op 20 Subcontract
Op 30 Expedition B-C
Op 40 Expedition C-D
Op 50 Expedition D-E
All external operation.
What is the effect if i do goods receipt PRO after operation 20 is done and then continue creating PO from generated PR for rest operation 30 40 and 50 ??? What effect and implication from logistic and costing point of view?
Regards,
Arman

HI
u cannot do GR until ur all operations are completed.
Amit

الترجمة I have a problem how can I cancel all operations evaluated by so I can use the service again in the same payment method because Apple stuck processes evaluated by on my account and I can not purchase again

الترجمة
I have a problem how can I cancel all operations evaluated by so I can use the service again in the same payment method because Apple stuck processes evaluated by on my account and I can not purchase again

If your CC was banned for fraudulent activity, you will need to use another CC. If the account was disabled, try changing the password to enable it at : https://appleid.apple.com
Otherwise, try contacting the iTunes store via : https://expresslane.apple.com , choosing iTunes and then iTunes store and from there selecting the topic as it pertains to your query.

Solaris 5.10 All operating system level parameters

HI Experts,
Pl let me know .Solaris 5.10 All operating system level parameters on ECC6.0
.i really appreciate your feed back on this request
Thanks
Hari

You cannot upgrade Solaris (any version) by simply applying patches. You also cannot upgrade Solaris 10 via any sort of downloaded "upgrade" package.
You will need to download the current DVD/CD set, then boot from it. At that point, you will be offered the choice of upgrading your system.

Confirmation of all operations.

Similar Messages

Maybe you are looking for