Confirmation of order quantity

Hi all,
please tell me whether the confirmation of sales order quanity depends on the shipping conditions ?
Eg. If requested delivery date(mandatory) in sales order is 10.06.2008 and shipping conditions is 2days then the order quanity is not getting confirmed on 10.06.2008 but on 12.06.2008.
Is it only because of shipping conditions as I have already checked the stock an and all to be available..
Points will be awarded for satisfying answer..
Edited by: rupali barbate on Jun 10, 2008 2:32 PM

Hi Rupali,
I think Confirmed quantity is Not dependent on Shipping conditions. As per my understanding u have already checked the stock in MMBE and stocks are there but the order is not confirmed?
Please check the table VBAK For seeing how many orders are open for that item. Some times it happen in MMBE the available quantity is 50, but u wont be able to create order because against these quantities some other order may be created.
So check this and revert back to me for any clarifications.
Reward Point if helpful.
Thanks,
Raja

Similar Messages

Confirmed quantity = Order quantity

Hi Experts,
Any control we can establish In sales order screen that, confirmed qty should be automtically reflectes into Order quantity when system do availability check.
Purpose
This makes the system whatever qty user maintain as order qty when system do availability check, system rewrites confirmed qty = order quantity. Is this can be acheived thru any standard process or any user exit in MV45 will do?
Regards,
Deepu

Hi,
Thank you for your advise.
Reason for rejection won't work for the scenario. Hence i cant go for that. I need not want any info abt customer order qty.
Hence first option can be considered for the reqmt. There is one more reqmt, if quantity is not confirmed system shuouldnt allow to create SO.
This scenario is applicable for a specific order type, item category and schedule lines.
Looking for your suggestions
Regards,
Deepu Pillai

Schedule line getting confirmed when Ordered Quanity is greater than stock.

Hi Sap Gurus,
We have an issue in one of the sales scenario.
In one of the sales orders the ordered quanity is purposely maintained greater than the stock at respective storage location(batch managed).
In this case the schedule line should not get confirmed and it should not allow delivery document creation.
But in the sales order the schedule lines are geeting confirmed and even the delivery document is getting created with picking request completion.
Could you please help to understand :
1. why the schedule lines are getting confirmed when ordered quantity > Inventory?
2. How do I stop delivery document creaton in this scenario?
Looking for a quick response.
Thanks in advance,
Bhaskar

Hello Bhaskar,
Is Availability Check in your system considering Replenishment Lead time, if yes, then this is possible.
Check this IMG Link:
IMG - Sales and Distribution - Basic Functions - Availability Check and Transfer of Requirements - Availability Check with ATP Logic or Against Planning - Carry Out Control For Availability Check
Here check the RLT settings.
Also check settings under In/Outward Movements, where things like include Purchase Order can lead to confirmation of stock in Sales Order, despite physical inventory being present.
Hope this helps,
Thanks,
Jignesh Mehta

Confirmed quantity more than the ordered quantity in sales order.

Hi All,
We have a situation wherein the confirmed quantity is more than the ordered quantity.
a.) SO was created for qty1.Two schedule lines were proposed as stock was not available.
b.) When stock came in and most probablly, when the rescheduling job calling tcode V_V2 was run, both the schedule lines were confirmed.
c.) As a result, further processing is not done by system as confirmed quantity is more than ordered quantity.
Also we noticed that double schedule line was confirmed for a another order even without the rescheduling job is run.
Can you please suggest as to why this is scenario is occuring and how we can avoid the reoccurence? Thanks in advance!!
Regards,
Jeevan Penumatsa

Hi Jeevan Penumatsa
Welcome to SDN forum
Generally two schedule lines will take place if stock is not available in your plant or if open orders are there for that material also. So check the stock in MMBE
.If there are any backorders then it might be getting added in the created sales order and then you might be getting in two schedule lines
Regards
Srinath

Sales order quantity gets confirmed Automatically

Dear All,
I have make to order Scenario. i have done all setting required for MTO.
however i create sales order my order quantity gets confirmed automatically. same time there is not stock available for material.
plz suggest how to stop confirm qty. in sales order?
Thanks & Regards
Ratish

Hi Ratish,
Please check the configuration settings in the IMG for Availability check.
You check have maintaining availability checking group 01 or 02 in the Material master.
Have you assigned Checking rule AE -SD order; make-to-order stock for checking group 01 or 02 in the IMG
Spro>sales and distribution>Basic functions>Availability check and transfer of requirements>Availability check>Availability check with ATP logic/Against planning>Carry out control for availbility check.
I hope it will help you,
Regards,
Murali.

Cash Sales- Don't save when Order quantity are differente of Confirmed Quan

Dear all , hope u all are doing great ...
I have a question about cash sales:
I have a process that when de sales order (BV) is save the outbound delivery is create (standard) and the good issue done. However, if the order quantity is diferent of the confirmed quantity (in the order) the outbound delivery is created with the confirmed quantity.
I would know if is it possible to the system sends a error message, in the order, when those quantities are diferent. Is any way, standard, to do that? Or have I must use an user-exit that compares the quantities and send a erro message to the user who is cresting the cash sales?
I hope you can help me...
Best regards,
Inês Garcê

Hi friend,
there is an option on the sales order to do complete delivery. And there is a check on customer material information record to allow only complete delivery. Along with these there is a check at delivery item cat. which checks if only a complete delivery needs to be allowed or trigger an error / disallow creation of delivery.
Regards
Sadhu Kishore

Confirmed quantity should come equal to order quantity

Hi Friends,
I have created one sales order and when I am going thruGo to>item data-->schedule lines then confirmed quantity is showing zero(0).
I want that confirmed quantity should come equal to order quantity.
Regards

Hi friends,
When I am trying with mov. type 561 or other and entering the material ,quantity,st. location and saving then getting the below error.
Any pointers.
G/L account 11500888 blocked for posting in company code 730
Message no. M7 161
Diagnosis
No postings can be made to a G/L account that is blocked.
Procedure
Determine whether another G/L account is suitable for the transaction.
Inform the individual or section responsible for G/L accounts in the relevant company code.
2.Also if I am trying with other matrl( having sufficient unrestricted stock available) then for that also quantities are not matching. why like this ?
Regards
Edited by: Amit Kumar on Nov 7, 2008 5:07 AM

Confirmed quantity = ordered quantity but stock 0

Morning SAP gurus i have a scenario where i dont have stock on hand but confirmed quantity at schedule line is = to the ordered quantity.This causes a problem when i receive stock from another plant which is less than what i ordered as my delivery note is created for the original ordered amount.
What can i do to make sure my schedule line does not confirm the quantity that i dont have on stock?
Thanks
Phenyo Ntshabele

"Activate Availability Check (AvC) in your sch line cat (tcode VOV6).
To do so, check/activate/tick mark Availability in Transaction of Sch Line cat.
Or redetermine your sch line cat with active for AvC.
before that, don't forget to check sch line cat determination (VOV5) with your I Cat
Thanks & Regards
JP"

Return/Replacement Confirmation quantity is exceeding order quantity

Hi All,
When an R/R is replicated from CRM to ECC in the sales order the confirmation quantity is exceeding order quantity .
What can be possible reason for this behavior ?
Kind Regards,
Naval

Hi Naval,
I can think of possible reason is rounding profile is activated on item category to round up based on the product.
Thanks
Ajay

Confirmation quantity greater than order quantity

Hi Experts,
While doing confirmation for phase wise for a process order it is showing the qty as follows.
Confirmation Qty = Order Qty * Base Qty.
I maintained Base qty in BOM as 98kg.
I maintained Base qty in Master Recipe as 98kg and operation qty as 98kg.
I created process order with 1000kg. While doing confirmation for a operation it is showing 98,000kg.
Order qty has to come as confirmation qty na...
How to get order qty as confirmation qty?
Please help me.
Naren

Dear ,
In Operation , Routing , BOM every where , base qty is the reference to calculate the Operation hrs , BOM item qty etc .
In your case , please change the Base Qty to 1 kg in BOM , Master Recipe or Routing and Carry out Read PP master data in Production Order Level so that it will work fine .
To understand farther , go and check in BOM /Master recipepe , the ration between Base Qty at Header and Item .If the Base qty is 98kg for header in BOM for 1000 of item than means , for an example to produce 98 kg ( any UOM) of X (Header ) you need 1000 pc (any UOM) as Y
In that case , if you Order qty is 1000 KG for X , then operation qty will 98*1000
Try and check
Regards
JH

Open Order Quantity for open sales orders

Is there a standard SAP Report that gives the open order quantity for every open sales order. "Open" is defined as any order quantity that has not shipped. Delivery creation is not the same as shipment. VA05 Report does not contain enough information to calculate the open order quantity for an ERP-based backlog report.

Try VA05 schedule lines standar variant...include status fields and both ordered qty and confirmed qty. In SAP standard system order status, status A means open orders fully (Nothing shipped, everything opened). Status B means in process orders (Partially processed - shipped). Status C means complete orders (Nothing opened). As there is no delivered qty in VA05, you need to download to excel the file and calculate the difference between both qty fields for each A and B status. That is a way to get the missing qty to be delivered or open qty as you stated.
Hope it helps.
Jorge Fernandez

How to get the open order quantity for a material

Hi All,
We need to get the open order quantity for materials. At present we are using the following logic...
SELECT VBAKVBELN VBAPPOSNR VBAP~KWMENG
    INTO TABLE IT_VBAP
FROM VBAP
INNER JOIN VBAK ON VBAKVBELN   = VBAPVBELN
INNER JOIN VAPMA ON VAPMAVBELN = VBAPVBELN
                  AND VAPMAPOSNR = VBAPPOSNR
INNER JOIN VBUP ON VBUPVBELN = VBAPVBELN
                 AND VBUPPOSNR = VBAPPOSNR
WHERE VAPMA~MATNR = IT_OUTPUT-MATNR
   AND VAPMA~WERKS = IT_OUTPUT-WERKS
    AND VBAK~AUART IN S_AUART
     AND VBUP~GBSTA NE 'C'.
But the Query takes quite a long time as it does a full range scan on all the tables. Is there any way the query can be improved, may be by creating an index etc? Or is there anyother way by which i can get the required data?
Any input is appreciated.
Regards
Brain.

This could help.
*& Report: zsdvr055                date written: 03/24/00              *
*& Author: Brian Huntley           last update: 03/24/00               *
*& Program Title: Open Order Report                                    *
*& Description: This report will create a list of sales documents      *
*&   that are open (contain at least one item that is not shipped).    *
*&   The report will sort by ship-to customer name and by sales        *
*&   document number.                                                  *
*& Tables:                                                             *
*& Files:                                                              *
*& Transactions:                                                       *
*& Changes:                                                            *
REPORT ZSDVR055 LINE-SIZE 255.
TABLES: VBPA,
        VBAP,
        VBUP,
        VBAK,
        VBKD,
        KNA1,
        VBEP,
        VBFA,
        LIKP,
        LIPS,
        EKET,
        T171T.
define hashed table for selected ship-to and sold-to SO's
TYPES: BEGIN OF TVBPA_TYPE,
         VBELN LIKE VBPA-VBELN,               "sales document
         POSNR LIKE VBPA-POSNR,               "item number
         PARVW LIKE VBPA-PARVW,               "partner function
         KUNNR LIKE VBPA-KUNNR,               "customer number
       END OF TVBPA_TYPE.
DATA: TVBPA TYPE HASHED TABLE OF TVBPA_TYPE
        WITH UNIQUE KEY VBELN POSNR PARVW WITH HEADER LINE.
define internal table for all selected SO's
DATA: BEGIN OF ITAB0 OCCURS 0,
        VBELN LIKE VBPA-VBELN,                "sales document
      END OF ITAB0.
define internal table for all selected SO items
DATA: BEGIN OF ITAB OCCURS 0,
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        MATNR LIKE VBAP-MATNR,                "material
        ARKTX LIKE VBAP-ARKTX,                "description
        PSTYV LIKE VBAP-PSTYV,                "item category
        KDMAT LIKE VBAP-KDMAT,                "customer material
        NETWR LIKE VBAP-NETWR,                "net value
        WAERK LIKE VBAP-WAERK,                "currency
        KWMENG LIKE VBAP-KWMENG,              "quantity
        ERDAT LIKE VBAP-ERDAT,                "entry date
        NETPR LIKE VBAP-NETPR,                "net price
        KPEIN LIKE VBAP-KPEIN,                "pricing unit
        PRCTR LIKE VBAP-PRCTR,                "profit center
        ERNAM LIKE VBAK-ERNAM,                "entered by
        AUART LIKE VBAK-AUART,                "order type
        VKORG LIKE VBAK-VKORG,                "sales organization
        VTWEG LIKE VBAK-VTWEG,                "distribution channel
        VDATU LIKE VBAK-VDATU,                "requested date (header)
        BNAME LIKE VBAK-BNAME,                "name of orderer
        KUNNR LIKE VBAK-KUNNR,                "sold-to customer
        BZIRK LIKE VBKD-BZIRK,                "sales district
        KURSK LIKE VBKD-KURSK,                "conversion rate
        BSTKD LIKE VBKD-BSTKD,                "customer PO
        LFGSA LIKE VBUP-LFGSA,                "overall delivery status
        FKSAA LIKE VBUP-FKSAA,                "overall billing status
        KUNWE LIKE VBPA-KUNNR,                "ship-to customer
        NAME1 LIKE KNA1-NAME1,                "ship-to customer name
        ORT01 LIKE KNA1-ORT01,                "ship-to address
        REGIO LIKE KNA1-REGIO,                "ship-to region (state)
        LAND1 LIKE KNA1-LAND1,                "ship-to country
      END OF ITAB.
create internal table for open orders
DATA: BEGIN OF ITAB1 OCCURS 0,
        KUNNR LIKE VBAK-KUNNR,                "sold-to customer
        KUNWE LIKE VBPA-KUNNR,                "ship-to customer
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        ZDATE1 LIKE VBEP-EDATU,               "requested date
        ZDATE2 LIKE VBEP-EDATU,               "scheduled date (confirm)
        ZDATE3 LIKE VBEP-EDATU,               "committed date
        ZQTY1 LIKE VBAP-KWMENG,               "qty ordered
        ZQTY2 LIKE VBEP-BMENG,                "backlog qty
        ZEXTD LIKE VBAP-NETWR,                "backlog net value
        ZDESC(30) TYPE C,                     "backlog description
      END OF ITAB1.
define internal table for SO schedule lines
DATA: BEGIN OF ITAB2A OCCURS 0,
        WADAT LIKE VBEP-WADAT,                "planned goods issue date
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        WMENG LIKE VBEP-WMENG,                "qty ordered
        BMENG LIKE VBEP-BMENG,                "qty confirmed
      END OF ITAB2A.
define internal table for SO item request dates
DATA: BEGIN OF ITAB2B OCCURS 0,
        EDATU LIKE VBEP-EDATU,                "delivery date
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        WMENG LIKE VBEP-WMENG,                "qty ordered
      END OF ITAB2B.
define internal table for SO item commit dates
DATA: BEGIN OF ITAB2C OCCURS 0,
        EDATU LIKE VBEP-EDATU,                "delivery date
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        ROMS1 LIKE VBEP-WMENG,                "committed qty
      END OF ITAB2C.
define internal table for SO item deliveries
DATA: BEGIN OF ITAB3 OCCURS 0,
        VGBEL LIKE LIPS-VGBEL,                "sales document
        VGPOS LIKE LIPS-VGPOS,                "sales document item
        VBELN LIKE LIKP-VBELN,                "delivery number
        POSNR LIKE LIPS-POSNR,                "delivery item number
        WADAT LIKE LIKP-WADAT,                "planned GI date
        WADAT_IST LIKE LIKP-WADAT_IST,        "actual GI date
        LFIMG LIKE LIPS-LFIMG,                "actual qty delivered
        ERDAT LIKE LIKP-ERDAT,                "date created
        ERZET LIKE LIKP-ERZET,                "time created
      END OF ITAB3.
define internal table for SO item / delivery cross reference
DATA: BEGIN OF ITAB4 OCCURS 0,
        VBELV LIKE VBFA-VBELV,                "sales document
        POSNV LIKE VBFA-POSNV,                "sales document item
        VBELN LIKE VBFA-VBELN,                "delivery number
        POSNN LIKE VBFA-POSNN,                "delivery item
        VBTYP_N LIKE VBFA-VBTYP_N,            "document category
        RFMNG LIKE VBFA-RFMNG,                "qty delivered
        PLMIN LIKE VBFA-PLMIN,                "plus/minus flag
      END OF ITAB4.
define local variables
DATA: ORDR_QTY LIKE VBEP-WMENG,          "order qty
      CONF_QTY LIKE VBEP-BMENG,          "confirmed qty
      NOCONF_QTY LIKE VBEP-BMENG,        "qty not confirmed
      DELV_QTY LIKE VBEP-WMENG,          "qty delivered
      NODELV_QTY LIKE VBEP-WMENG,        "qty not delivered
      REMAIN_QTY LIKE VBEP-WMENG,        "qty remain to get conf date
      REQ_DATE LIKE VBEP-EDATU,          "request date
      COM_DATE LIKE VBEP-EDATU,          "committed date
      DELV_QTY1 LIKE VBEP-WMENG,         "preceding delivery qty
      REMAIN_QTY1 LIKE VBEP-WMENG,       "qty remain to get reqest date
      REMAIN_QTY2 LIKE VBEP-WMENG,       "qty remain to get commit date
      THIRD_QTY LIKE VBEP-WMENG,         "3rd party no PO qty
      SO_STOCK LIKE MSKA-KALAB,          "sales order stock
      ZPRICE LIKE VBAP-NETPR,            "unit price USD
      ADRS1(40) TYPE C,                  "concatenated city and region
      ADRS2(45) TYPE C,                  "city, region and country
      ADRS3(80) TYPE C,                  "name, city, rgn, ctry
      ZCNTR TYPE I.                      "counter
define select options
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VKORG FOR VBAK-VKORG DEFAULT '1000',
S_VTWEG FOR VBAK-VTWEG DEFAULT '10' NO-DISPLAY,
S_SPART FOR VBAK-SPART DEFAULT '00' NO-DISPLAY,
S_KUNNR FOR VBPA-KUNNR MATCHCODE OBJECT DEBI,
S_KUNWE FOR VBPA-KUNNR MATCHCODE OBJECT DEBI.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
S_BZIRK FOR VBKD-BZIRK,
S_PRCTR FOR VBAP-PRCTR,
S_MATNR FOR VBAP-MATNR MATCHCODE OBJECT MAT1,
S_ERNAM FOR VBAK-ERNAM,
S_ERDAT FOR VBAP-ERDAT.
SELECTION-SCREEN END OF BLOCK BLK1.
AT SELECTION-SCREEN.
IF S_KUNNR IS INITIAL AND S_KUNWE IS INITIAL.
    MESSAGE E005(ZM) WITH TEXT-100.
ENDIF.
MAIN PROGRAM
INITIALIZATION.
INCLUDE ZSYHEADR.
START-OF-SELECTION.
PERFORM 100_GET_SO_ITEMS.
PERFORM 200_GET_NO_DELIVERY.
PERFORM 300_GET_NO_GOODS_ISSUE.
PERFORM 400_GET_PARTIAL_DELIVERY.
PERFORM 500_GET_THIRD_PARTY.
PERFORM 900_CREATE_LIST.
FORM 100_GET_SO_ITEMS
FORM 100_GET_SO_ITEMS.
get SO's for selected ship-to and sold-to customers
REFRESH TVBPA.
IF NOT S_KUNNR IS INITIAL.
    SELECT VBELN POSNR PARVW KUNNR
      FROM VBPA INTO TABLE TVBPA
     WHERE KUNNR IN S_KUNNR AND PARVW = 'AG' AND VBELN < '0080000000'.
ENDIF.
IF NOT S_KUNWE IS INITIAL.
    SELECT VBELN POSNR PARVW KUNNR
      FROM VBPA APPENDING TABLE TVBPA
      WHERE KUNNR IN S_KUNWE AND PARVW = 'WE' AND VBELN < '0080000000'.
ENDIF.
DESCRIBE TABLE TVBPA LINES ZCNTR.
IF ZCNTR = 0.
    WRITE: /1 'No data found for selection'.
    STOP.
ENDIF.
eliminate duplicate SO's
LOOP AT TVBPA.
    CLEAR ITAB0.
    MOVE TVBPA-VBELN TO ITAB0-VBELN.
    APPEND ITAB0.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM ITAB0.
get SO detail
SELECT VBAP~VBELN VBAP~POSNR VBAP~MATNR VBAP~ARKTX VBAP~PSTYV
      VBAP~KDMAT VBAP~NETWR VBAP~WAERK VBAP~KWMENG VBAP~ERDAT
      VBAP~NETPR VBAP~KPEIN VBAP~PRCTR VBAK~ERNAM VBAK~AUART
      VBAK~VKORG VBAK~VTWEG VBAK~VDATU VBAK~BNAME VBAK~KUNNR
      VBKD~BZIRK VBKD~KURSK VBKD~BSTKD VBUP~LFGSA VBUP~FKSAA
    FROM VBAP INNER JOIN VBUP ON VBUP~VBELN = VBAP~VBELN AND
        VBUP~POSNR = VBAP~POSNR
      INNER JOIN VBKD ON VBKD~VBELN = VBAP~VBELN AND
        VBKD~POSNR = VBAP~POSNR
      INNER JOIN VBAK ON VBAK~VBELN = VBAP~VBELN
    INTO TABLE ITAB FOR ALL ENTRIES IN ITAB0
    WHERE VBAP~VBELN = ITAB0-VBELN AND VBAP~MATNR IN S_MATNR AND
      VBAP~ERDAT IN S_ERDAT AND VBAP~PRCTR IN S_PRCTR AND
      VBAP~ABGRU = SPACE AND VBKD~BZIRK IN S_BZIRK AND
      VBAK~VKORG IN S_VKORG AND VBAK~VTWEG IN S_VTWEG AND
      VBAK~SPART IN S_SPART AND VBAK~KUNNR IN S_KUNNR AND
      VBAK~ERNAM IN S_ERNAM.
IF SY-SUBRC <> 0.
    WRITE: /1 'No data found for selection'.
    STOP.
ENDIF.
loop thru SO items
LOOP AT ITAB.
get ship-to customer
    IF NOT S_KUNWE IS INITIAL.
      CLEAR TVBPA.
      READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
        POSNR = ITAB-POSNR PARVW = 'WE'.
      IF SY-SUBRC <> 0.
        READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
          POSNR = '000000' PARVW = 'WE'.
      ENDIF.
      MOVE TVBPA-KUNNR TO ITAB-KUNWE.
    ELSE.
      CLEAR ITAB-KUNWE.
      SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          PARVW = 'WE'.
      IF SY-SUBRC <> 0.
        SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
          WHERE VBELN = ITAB-VBELN AND POSNR = '000000' AND
            PARVW = 'WE'.
      ENDIF.
    ENDIF.
    IF NOT ITAB-KUNWE IN S_KUNWE.
      DELETE ITAB.
      CONTINUE.
    ENDIF.
get ship-to customer address info
    SELECT SINGLE NAME1 ORT01 REGIO LAND1 FROM KNA1
      INTO (ITAB-NAME1, ITAB-ORT01, ITAB-REGIO, ITAB-LAND1)
      WHERE KUNNR = ITAB-KUNWE.
    MODIFY ITAB.
ENDLOOP.
SORT ITAB BY VBELN POSNR.
ENDFORM.
FORM 200_GET_NO_DELIVERY
get detail for SO items w/ no deliveries for order document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 200_GET_NO_DELIVERY.
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
    AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
    AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
    AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = A (not delivered)
    IF ITAB-LFGSA = 'A'.
assign values to detail fields
      CLEAR ITAB1.
      ITAB1-KUNNR = ITAB-KUNNR.
      ITAB1-KUNWE = ITAB-KUNWE.
      ITAB1-VBELN = ITAB-VBELN.
      ITAB1-POSNR = ITAB-POSNR.
      IF ITAB-KURSK = 0.
        ITAB-KURSK = 1.
      ENDIF.
      IF ITAB-KPEIN = 0.
        ITAB-KPEIN = 1.
      ENDIF.
select schedule lines for SO item and write to internal table itab2a
      SELECT WADAT VBELN POSNR WMENG BMENG
        FROM VBEP INTO TABLE ITAB2A
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
select sched lines w/request date and write to internal table itab2b
      SELECT EDATU VBELN POSNR WMENG
        FROM VBEP INTO TABLE ITAB2B
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          WMENG <> 0.
select sched lines w/commit date and write to internal table itab2c
      SELECT EDATU VBELN POSNR ROMS1
        FROM VBEP INTO TABLE ITAB2C
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          ROMS1 <> 0.
      SORT ITAB2A BY WADAT.
      SORT ITAB2B BY EDATU.
      SORT ITAB2C BY EDATU.
      ORDR_QTY = 0.
      CONF_QTY = 0.
      NOCONF_QTY = 0.
calculate the unconfirmed qty for a SO item
      LOOP AT ITAB2A.
        CONF_QTY = CONF_QTY + ITAB2A-BMENG.
        ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
      ENDLOOP.
      NOCONF_QTY = ORDR_QTY - CONF_QTY.
      LOOP AT ITAB2A WHERE BMENG <> 0.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING ITAB2A-BMENG REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING ITAB2A-BMENG COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = ITAB2A-WADAT.
        ITAB1-ZDATE3 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = ITAB2A-BMENG.
        ITAB1-ZDESC = 'no delivery, confirmed'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDLOOP.
get request date for SO item
      IF NOCONF_QTY <> 0.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING NOCONF_QTY REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING NOCONF_QTY COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = '99991231'.
        ITAB1-ZDATE3 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = NOCONF_QTY.
        ITAB1-ZDESC = 'no delivery, not confirmed'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 300_GET_NO_GOODS_ISSUE
get detail for SO items w/deliveries and no goods issue for
doc types (ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 300_GET_NO_GOODS_ISSUE.
get detail for deliveries w/no goods issue
SELECT VBELN WADAT WADAT_IST ERDAT ERZET
    FROM LIKP INTO (LIKP-VBELN, LIKP-WADAT, LIKP-WADAT_IST,
      LIKP-ERDAT, LIKP-ERZET)
    WHERE WADAT_IST = 0.
select if actual qty delivered <> 0
    CLEAR LIPS.
    SELECT POSNR VGBEL VGPOS LFIMG
      FROM LIPS INTO (LIPS-POSNR, LIPS-VGBEL, LIPS-VGPOS, LIPS-LFIMG)
      WHERE VBELN = LIKP-VBELN AND LFIMG <> 0.
select if goods movement status on delivery = A (no goods issue)
      CLEAR VBUP.
      SELECT SINGLE WBSTA FROM VBUP INTO VBUP-WBSTA
        WHERE VBELN = LIKP-VBELN AND POSNR = LIPS-POSNR.
      IF VBUP-WBSTA = 'A'.
        CLEAR ITAB3.
        ITAB3-VGBEL = LIPS-VGBEL.
        ITAB3-VGPOS = LIPS-VGPOS.
        ITAB3-VBELN = LIKP-VBELN.
        ITAB3-POSNR = LIPS-POSNR.
        ITAB3-WADAT = LIKP-WADAT.
        ITAB3-WADAT_IST = LIKP-WADAT_IST.
        ITAB3-LFIMG = LIPS-LFIMG.
        ITAB3-ERDAT = LIKP-ERDAT.
        ITAB3-ERZET = LIKP-ERZET.
        APPEND ITAB3.
      ENDIF.
    ENDSELECT.
ENDSELECT.
SORT ITAB3 BY VGBEL VGPOS VBELN POSNR.
loop thru deliveries w/no goods issue and get SO item detail
LOOP AT ITAB3.
    CLEAR ITAB.
    READ TABLE ITAB WITH KEY VBELN = ITAB3-VGBEL POSNR = ITAB3-VGPOS.
    IF SY-SUBRC <> 0.
      IF ITAB-AUART = 'ZZOR' OR ITAB-AUART = 'ZZC1' OR
        ITAB-AUART = 'ZZCO' OR ITAB-AUART = 'ZZRP' OR
        ITAB-AUART = 'ZZRW' OR ITAB-AUART = 'KE' OR
        ITAB-AUART = 'KR' OR ITAB-AUART = 'ZCHP' OR
        ITAB-AUART = 'ZPSO' OR ITAB-AUART = 'ZZNC'.
assign values to detail fields
        CLEAR ITAB1.
        ITAB1-KUNNR = ITAB-KUNNR.
        ITAB1-KUNWE = ITAB-KUNWE.
        ITAB1-VBELN = ITAB-VBELN.
        ITAB1-POSNR = ITAB-POSNR.
        IF ITAB-KURSK = 0.
          ITAB-KURSK = 1.
        ENDIF.
        IF ITAB-KPEIN = 0.
          ITAB-KPEIN = 1.
        ENDIF.
select delivery qty for SO item and write to internal table
        SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
          FROM VBFA INTO TABLE ITAB4
          WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
            ( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
        DELV_QTY = 0.
        DELV_QTY1 = 0.
        LOOP AT ITAB4.
          IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
              ITAB-AUART = 'KR').
            IF ITAB4-PLMIN = '-'.
              ITAB4-RFMNG = ITAB4-RFMNG * -1.
            ENDIF.
determine if delivery for SO item precedes delivery w/no goods
issue (to determine request date and qty)
            CLEAR LIKP.
            SELECT SINGLE ERDAT ERZET
              FROM LIKP INTO (LIKP-ERDAT, LIKP-ERZET)
              WHERE VBELN = ITAB4-VBELN.
            IF LIKP-ERDAT < ITAB3-ERDAT OR ( LIKP-ERDAT = ITAB3-ERDAT
                AND LIKP-ERZET < ITAB3-ERZET ).
              DELV_QTY1 = DELV_QTY1 + ITAB4-RFMNG.
            ENDIF.
            DELV_QTY = DELV_QTY + ITAB4-RFMNG.
          ENDIF.
        ENDLOOP.
get request dates for SO item
        REFRESH ITAB2B.
        SELECT EDATU VBELN POSNR WMENG
          FROM VBEP INTO TABLE ITAB2B
          WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
            WMENG <> 0.
select sched lines w/commit date and write to itab2c
        REFRESH ITAB2C.
        SELECT EDATU VBELN POSNR ROMS1
          FROM VBEP INTO TABLE ITAB2C
          WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
            ROMS1 <> 0.
        SORT ITAB2B BY EDATU.
        SORT ITAB2C BY EDATU.
loop thru request dates and delete request date entries for
quantity(s) for preceding deliveries
        REMAIN_QTY1 = DELV_QTY1.
        LOOP AT ITAB2B.
          IF ITAB2B-WMENG > REMAIN_QTY1.
            ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
            MODIFY ITAB2B.
            EXIT.
          ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
            DELETE ITAB2B.
            EXIT.
          ELSE.
            REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
            DELETE ITAB2B.
          ENDIF.
        ENDLOOP.
loop thru commit dates and delete commit date entries for
quantity(s) for preceding deliveries
        REMAIN_QTY2 = DELV_QTY1.
        LOOP AT ITAB2C.
          IF ITAB2C-ROMS1 > REMAIN_QTY2.
            ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
            MODIFY ITAB2C.
            EXIT.
          ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
            DELETE ITAB2C.
            EXIT.
          ELSE.
            REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
            DELETE ITAB2C.
          ENDIF.
        ENDLOOP.
if planned goods issue date is 0, put qty in non-confirmed
get request date for SO item
        IF ITAB3-WADAT <> 0.
          PERFORM GET_REQUEST_DATE TABLES ITAB2B
            USING ITAB3-LFIMG REQ_DATE.
          PERFORM GET_COMMIT_DATE TABLES ITAB2C
            USING ITAB3-LFIMG COM_DATE.
          ITAB1-ZDATE1 = REQ_DATE.
          ITAB1-ZDATE2 = ITAB3-WADAT.
          ITAB1-ZDATE3 = COM_DATE.
          ITAB1-ZQTY1 = ITAB-KWMENG.
          ITAB1-ZQTY2 = ITAB3-LFIMG.
          ITAB1-ZDESC = 'delivery, no goods issue'.
        ELSE.
          PERFORM GET_REQUEST_DATE TABLES ITAB2B
            USING ITAB3-LFIMG REQ_DATE.
          PERFORM GET_COMMIT_DATE TABLES ITAB2C
            USING ITAB3-LFIMG COM_DATE.
          ITAB1-ZDATE1 = REQ_DATE.
          ITAB1-ZDATE2 = '99991231'.
          ITAB1-ZDATE3 = COM_DATE.
          ITAB1-ZQTY1 = ITAB-KWMENG.
          ITAB1-ZQTY2 = ITAB3-LFIMG.
          ITAB1-ZDESC = 'delivery, no goods issue date'.
        ENDIF.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 400_GET_PARTIAL_DELIVERY
get detail for SO items w/partial deliveries for document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 400_GET_PARTIAL_DELIVERY.
process SO items for selected order types
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
      AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
      AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
      AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = B (partially delivered)
    IF ITAB-LFGSA = 'B'.
assign values to detail fields
      CLEAR ITAB1.
      ITAB1-KUNNR = ITAB-KUNNR.
      ITAB1-KUNWE = ITAB-KUNWE.
      ITAB1-VBELN = ITAB-VBELN.
      ITAB1-POSNR = ITAB-POSNR.
      IF ITAB-KURSK = 0.
        ITAB-KURSK = 1.
      ENDIF.
      IF ITAB-KPEIN = 0.
        ITAB-KPEIN = 1.
      ENDIF.
select delivery qty for SO item and write to internal table
      SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
        FROM VBFA INTO TABLE ITAB4
        WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
          ( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
      DELV_QTY = 0.
      LOOP AT ITAB4.
        IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
            ITAB-AUART = 'KR').
          IF ITAB4-PLMIN = '-'.
            ITAB4-RFMNG = ITAB4-RFMNG * -1.
          ENDIF.
          DELV_QTY = DELV_QTY + ITAB4-RFMNG.
        ENDIF.
      ENDLOOP.
select schedule lines for SO item and write to internal table
      REFRESH ITAB2A.
      SELECT WADAT VBELN POSNR WMENG BMENG
        FROM VBEP INTO TABLE ITAB2A
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
get request dates from schedule line table
      REFRESH ITAB2B.
      SELECT EDATU VBELN POSNR WMENG
        FROM VBEP INTO TABLE ITAB2B
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          WMENG <> 0.
get commit dates from schedule line table
      REFRESH ITAB2C.
      SELECT EDATU VBELN POSNR ROMS1
        FROM VBEP INTO TABLE ITAB2C
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          ROMS1 <> 0.
      SORT ITAB2B BY EDATU.
      SORT ITAB2C BY EDATU.
      SORT ITAB2A BY WADAT.
loop thru request dates and delete request date entries for
quantity(s) already delivered
      REMAIN_QTY1 = DELV_QTY.
      LOOP AT ITAB2B.
        IF ITAB2B-WMENG > REMAIN_QTY1.
          ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
          MODIFY ITAB2B.
          EXIT.
        ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
          DELETE ITAB2B.
          EXIT.
        ELSE.
          REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
          DELETE ITAB2B.
        ENDIF.
      ENDLOOP.
loop thru commit dates and delete request date entries for
quantity(s) already delivered
      REMAIN_QTY2 = DELV_QTY.
      LOOP AT ITAB2C.
        IF ITAB2C-ROMS1 > REMAIN_QTY2.
          ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
          MODIFY ITAB2C.
          EXIT.
        ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
          DELETE ITAB2C.
          EXIT.
        ELSE.
          REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
          DELETE ITAB2C.
        ENDIF.
      ENDLOOP.
       ORDR_QTY = 0.
       CONF_QTY = 0.
       NOCONF_QTY = 0.
calculate the unconfirmed qty for SO item
      LOOP AT ITAB2A.
        ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
        CONF_QTY = CONF_QTY + ITAB2A-BMENG.
      ENDLOOP.
      NOCONF_QTY = ORDR_QTY - CONF_QTY.
      NODELV_QTY = ORDR_QTY - DELV_QTY.
loop thru schedule lines and process entries with no related
delivery(s)
      REMAIN_QTY = DELV_QTY.
      LOOP AT ITAB2A.
        IF ITAB2A-BMENG <> 0.
          IF ITAB2A-BMENG <= REMAIN_QTY.
            REMAIN_QTY = REMAIN_QTY - ITAB2A-BMENG.
          ELSE.
            ITAB2A-BMENG = ITAB2A-BMENG - REMAIN_QTY.
            PERFORM GET_REQUEST_DATE TABLES ITAB2B
              USING ITAB2A-BMENG REQ_DATE.
            PERFORM GET_COMMIT_DATE TABLES ITAB2C
              USING ITAB2A-BMENG COM_DATE.
            ITAB1-ZDATE1 = REQ_DATE.
            ITAB1-ZDATE2 = ITAB2A-WADAT.
            ITAB1-ZDATE3 = COM_DATE.
            ITAB1-ZQTY1 = ITAB-KWMENG.
            ITAB1-ZQTY2 = ITAB2A-BMENG.
            ITAB1-ZDESC = 'partial delivery'.
calculate net value for backlog qty
            ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
            ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
            IF ITAB-AUART = 'KR'.
              ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
              ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
              ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
            ENDIF.
            APPEND ITAB1.
            REMAIN_QTY = 0.
          ENDIF.
        ENDIF.
      ENDLOOP.
if total unconfirmed >= total not delivered, qty is unconfirmed
      IF NOCONF_QTY >= NODELV_QTY.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING NODELV_QTY REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING NODELV_QTY COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = '99991231'.
        ITAB1-ZDATE3 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = NODELV_QTY.
        ITAB1-ZDESC = 'partial delv, not confirmed'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 500_GET_THIRD_PARTY
get detail for third party SO items
FORM 500_GET_THIRD_PARTY.
process SO items for selected order types
LOOP AT ITAB WHERE PSTYV = 'TAS' AND ( AUART = 'ZZOR' OR
    AUART = 'ZZC1' OR AUART = 'ZZCO' OR AUART = 'ZZRP' OR
    AUART = 'ZZRW' OR AUART = 'KE' OR AUART = 'KR' OR
    AUART = 'ZCHP' OR AUART = 'ZPSO' OR AUART = 'ZZNC' ).
select if billing status <> C (billed)
    IF ITAB-FKSAA <> 'C'.
assign values to detail fields
      CLEAR ITAB1.
      ITAB1-KUNNR = ITAB-KUNNR.
      ITAB1-KUNWE = ITAB-KUNWE.
      ITAB1-VBELN = ITAB-VBELN.
      ITAB1-POSNR = ITAB-POSNR.
      IF ITAB-KURSK = 0.
        ITAB-KURSK = 1.
      ENDIF.
      IF ITAB-KPEIN = 0.
        ITAB-KPEIN = 1.
      ENDIF.
get request dates from schedule line table
      REFRESH ITAB2B.
      SELECT EDATU VBELN POSNR WMENG
        FROM VBEP INTO TABLE ITAB2B
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          WMENG <> 0.
get commit dates from schedule line table
      REFRESH ITAB2C.
      SELECT EDATU VBELN POSNR ROMS1
        FROM VBEP INTO TABLE ITAB2C
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          ROMS1 <> 0.
      SORT ITAB2B BY EDATU.
      SORT ITAB2C BY EDATU.
get PO number(s) for SO item and write to internal table
      REFRESH ITAB4.
      SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
        FROM VBFA INTO TABLE ITAB4
        WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
          VBTYP_N = 'V' AND RFMNG <> 0.
calculate total delivery qty for PO item
      DELV_QTY = 0.
      LOOP AT ITAB4.
        IF ITAB4-PLMIN = '-'.
          ITAB4-RFMNG = ITAB4-RFMNG * -1.
        ENDIF.
        DELV_QTY = DELV_QTY + ITAB4-RFMNG.
      ENDLOOP.
loop thru PO's for SO item
      LOOP AT ITAB4.
select delivery lines for PO item
        SELECT EINDT EBELN EBELP MENGE FROM EKET
          INTO (EKET-EINDT, EKET-EBELN, EKET-EBELP, EKET-MENGE)
          WHERE EBELN = ITAB4-VBELN AND EBELP = ITAB4-POSNN.
          PERFORM GET_REQUEST_DATE TABLES ITAB2B
            USING EKET-MENGE REQ_DATE.
          PERFORM GET_COMMIT_DATE TABLES ITAB2C
            USING EKET-MENGE COM_DATE.
          ITAB1-ZDATE1 = REQ_DATE.
          ITAB1-ZDATE2 = EKET-EINDT.
          ITAB1-ZDATE3 = COM_DATE.
          ITAB1-ZQTY1 = ITAB-KWMENG.
          ITAB1-ZQTY2 = EKET-MENGE.
          ITAB1-ZDESC = '3rd party item'.
calculate net value for backlog qty
          ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
          ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
          APPEND ITAB1.
        ENDSELECT.
      ENDLOOP.
if total delivery qty < order qty, put remaining in non-confirmed
      IF DELV_QTY < ITAB-KWMENG.
        THIRD_QTY = ITAB-KWMENG - DELV_QTY.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING THIRD_QTY REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING THIRD_QTY COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = '99991231'.
        ITAB1-ZDATE2 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = THIRD_QTY.
        ITAB1-ZDESC = '3rd party item, no PO'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
        APPEND ITAB1.
        CONTINUE.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 900_CREATE_LIST
process open business detail and create list
FORM 900_CREATE_LIST.
if internal table is empty, write message and exit
    DESCRIBE TABLE ITAB1 LINES ZCNTR.
    IF ZCNTR = 0.
      WRITE: / 'No Data Found for Selection'.
      STOP.
    ENDIF.
    SORT ITAB1 BY KUNNR KUNWE VBELN POSNR.
loop thru sorted table and create list
    LOOP AT ITAB1.
      IF ITAB1-ZDATE1 = SPACE.
        ITAB1-ZDATE1 = '99991231'.
      ENDIF.
      IF ITAB1-ZDATE3 = SPACE.
        ITAB1-ZDATE3 = '99991231'.
      ENDIF.
get SO item detail
      CLEAR ITAB.
      READ TABLE ITAB WITH KEY VBELN = ITAB1-VBELN
                               POSNR = ITAB1-POSNR BINARY SEARCH.
print sold-to and ship-to customer header info
      AT NEW KUNWE.
        CLEAR KNA1.
        SELECT SINGLE NAME1 FROM KNA1 INTO KNA1-NAME1
          WHERE KUNNR = ITAB1-KUNNR.
        CONCATENATE ITAB-ORT01 ITAB-REGIO INTO ADRS1 SEPARATED BY ', '.
        CONCATENATE ADRS1 ITAB-LAND1 INTO ADRS2 SEPARATED BY '   '.
        CONCATENATE ITAB-NAME1 ADRS2 INTO ADRS3 SEPARATED BY '   '.
        FORMAT COLOR 1 INTENSIFIED OFF.
        WRITE: /1 'Sold-to:', 10 ITAB1-KUNNR, 18 KNA1-NAME1,
          56 'Ship-to:', 65 ITAB1-KUNWE, 73 ADRS3.
        FORMAT RESET.
        SKIP.
      ENDAT.
print out backlog detail
      CLEAR T171T.
      SELECT SINGLE BZTXT FROM T171T INTO T171T-BZTXT
        WHERE SPRAS = SY-LANGU AND BZIRK = ITAB-BZIRK.
      WRITE: /1 ITAB1-VBELN,
        13(6) ITAB1-POSNR NO-ZERO,
        21 ITAB-MATNR,
        41 ITAB-ARKTX,
        83 ITAB1-ZDATE1,
        95 ITAB1-ZDATE3,
        107 ITAB1-ZDATE2,
        119 ITAB-ERNAM,
        129 ITAB-BZIRK, 135 T171T-BZTXT,
        157(20) ITAB-BSTKD,
        179(12) ITAB1-ZQTY1 DECIMALS 0,
        193(12) ITAB1-ZQTY2 DECIMALS 0,
        207(16) ITAB1-ZEXTD DECIMALS 2,
        225 ITAB1-ZDESC.
      AT END OF VBELN.
        SKIP.
      ENDAT.
print footing at ship-to customer
      AT END OF KUNWE.
        SUM.
        ULINE: /193(12), 207(16).
        FORMAT COLOR 1 INTENSIFIED OFF.
        WRITE: /1 'Total: Sold-to:', 18 ITAB1-KUNNR,
          25 '/', 27 'Ship-to:', 36 ITAB1-KUNWE,
          193(12) ITAB1-ZQTY2 DECIMALS 0,
          207(16) ITAB1-ZEXTD DECIMALS 2.
        FORMAT RESET.
        SKIP 2.
      ENDAT.
      AT LAST.
        SUM.
        ULINE: /193(12), 207(16).
        FORMAT COLOR 1 INTENSIFIED ON.
        WRITE: /1 'Report Total:',
          193(12) ITAB1-ZQTY2 DECIMALS 0,
          207(16) ITAB1-ZEXTD DECIMALS 2.
        FORMAT RESET.
      ENDAT.
    ENDLOOP.
ENDFORM.
FORM GET_REQUEST_DATE
subroutine to get request date for SO item
FORM GET_REQUEST_DATE TABLES FTAB STRUCTURE ITAB2B
                      USING CONF_QTY REQ_DATE.
DATA: REMAIN LIKE VBEP-WMENG,                 "qty remaining
      CNTR TYPE I,                            "loop counter
      TAB_INDEX TYPE I.                       "table index
initialize
REMAIN = 0.
REQ_DATE = SPACE.
get first request date from table
TAB_INDEX = 1.
READ TABLE FTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
    REQ_DATE = SPACE.
    EXIT.
ELSE.
    REQ_DATE = FTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = FTAB-WMENG - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
    FTAB-WMENG = REMAIN.
    MODIFY FTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
    DELETE FTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
    CNTR = 0.
    WHILE REMAIN < 0 OR CNTR < 10.
      DELETE FTAB INDEX TAB_INDEX.
      TAB_INDEX = TAB_INDEX + 1.
      READ TABLE FTAB INDEX TAB_INDEX.
      REMAIN = REMAIN + FTAB-WMENG.
      CNTR = CNTR + 1.
    ENDWHILE.
    IF REMAIN = 0.
      DELETE FTAB INDEX TAB_INDEX.
    ELSEIF REMAIN > 0.
      FTAB-WMENG = REMAIN.
      MODIFY FTAB INDEX TAB_INDEX.
    ENDIF.
ENDIF.
ENDFORM.
FORM GET_COMMIT_DATE
subroutine to get commit date for SO item
FORM GET_COMMIT_DATE TABLES CTAB STRUCTURE ITAB2C
                      USING CONF_QTY COM_DATE.
DATA: REMAIN LIKE VBEP-WMENG,                 "qty remaining
      CNTR TYPE I,                            "loop counter
      TAB_INDEX TYPE I.                       "table index
initialize
REMAIN = 0.
COM_DATE = SPACE.
get first commit date from table
TAB_INDEX = 1.
READ TABLE CTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
    COM_DATE = SPACE.
    EXIT.
ELSE.
    COM_DATE = CTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = CTAB-ROMS1 - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
    CTAB-ROMS1 = REMAIN.
    MODIFY CTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
    DELETE CTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
    CNTR = 0.
    WHILE REMAIN < 0 OR CNTR < 10.
      DELETE CTAB INDEX TAB_INDEX.
      TAB_INDEX = TAB_INDEX + 1.
      READ TABLE CTAB INDEX TAB_INDEX.
      REMAIN = REMAIN + CTAB-ROMS1.
      CNTR = CNTR + 1.
    ENDWHILE.
    IF REMAIN = 0.
      DELETE CTAB INDEX TAB_INDEX.
    ELSEIF REMAIN > 0.
      CTAB-ROMS1 = REMAIN.
      MODIFY CTAB INDEX TAB_INDEX.
    ENDIF.
ENDIF.
ENDFORM.
END-OF-REPORT.

Table and Field for Open Order Quantity for a Customer and Material

Hi
I created two sales orders 3 and 5 quantities, and delivered 1 qty in the second order.
when I checked the table VBBE or VA05, I am able to see 3 and 4 qantities open.
but I want to see the total 7 as open order qty, i.e, 3+4=7
because both the orders are placed by the same customer and same material
can u please tell me in which table exactly the total open order quantity for a customer and total open order quantity for a material is stored
Madhu
Edited by: madhubabu rao on Jul 1, 2008 1:49 PM

HI,
U can get the information in VA05 as there are columns like confirmed quantity and order quantty and status. U can use summation button (add upto values) to get required information.
Thx,
Pramod

How to get the open production order quantity

Hi,
I need to generate a report with open prodution order quantity.
I am planning to use the following rule
(AFkO-GAMNG) - (AFKO-IGMNG)
will this work ?
Pls give me the feedback.
Thanks

Hi Anil,
Using these two field from table afko, you will get the confirmed qty data. As per Rajesh suggestion you need to take data from MSEG TABLE.
REGARDS,
SATYAJIT

Open Order quantity in VA05

Hi experts,
i have a issue in VA05 colum "Confirm quantity" and "Order quantity" not matching to VBB-OMENG and VBBE-VMENG.
it should be match?
I required Open quantity against sales order. i delivred it partialy.
thanks/
anurag

Hi Anurag,
Try function BAPI_SALESORDER_GETSTATUS
You can write simple program with BAPI_SALESORDER_GETSTATUS. In program you must find document number with vbak or vbap. Import ur document number.
Then you can see sales order lines;
Order quantity,
Open quantity,
delivery quantity,
Delivery number,
and more.
regards,
Gorbil.

Confirmation of order quantity

Similar Messages

Maybe you are looking for