Confirmation over PO quantity not possible despite TOG tolerances

hi,
we are using the extended classic scenario and we have tolerance group attached to TOG attribute for employees in PPOMA_BBP. However when a PO is created form the shopping cart, the employee cannot do a confirmation more than the PO quanitity.
(The Tolerance group has the tolerance keys CF & DQ).
message: "PU Ordered quantity exceeded by 1 EA "
has anyone faced this problem?
we are on SRM4.0 (support pack SAPKIBKS07)
cheers

Hi Subrote,
did you check tolerance customizing in R/3 ?
In SRM there is a "double" tolerance check:
- one in SRM against locally defined tolerance (via attribute TOG)
- one in R/3 by simulating the GR creation from SRM
So you may be more restrictive in R/3 than in SRM.
Rgds
Christophe

Similar Messages

New operation for production order - change operation quantity not possible

Hello all,
we want to create a new operation for a production order.
So we go to CO02 and to the operation order overview screen.
But when we add a new operation, the system will not let us determine the operation quantity for the new operation, the system will just take the quantity from the operation before.
How can I determine the qty by myself?
Thanks
Anne

You can do another way also. You change your routing with new operation quantity and save it in CA02. NOw you go to CO02 and read master data in funtions, then the new operation quantity will definetly come in to the production order.
KrishnamurtyDSS

Audio over USB iExpress not possible?

I bought these Palo Alto Cubik loudspeakers. They use the USB audio connection and then amplify. But when I plug it into iExpress, they do not appear as possible output, only the minijack input does. So the famous digital signal transport is not worth much. Is there something I should do to use USB speakres with iExpress USB out?

I think you are forgetting that the USB port on the AirPort is a network USB connection. That is a whole different ballgame than a USB port on a computer.
If you would like to see expanded functionality....you should contact Apple directly to let them know.
There is an extremely small chance that they will ever see your post on a user-to-user forum. Even if they might....you will never receive a response from Apple here.
Tell Apple here:
Apple - AirPort Express - Feedback

Trying to scroll emails is not possible despite trying advised solution 'about:config' & I get a window with a mike and clef symbol.

I am still unable to scroll with the mouse -touchpad works ok- despite updating mouse software & applying solution in 'about:config'. When attempting to scroll, i get a window which displays a mike with a clef note superimposed.

loqs wrote:You built the package (using --asroot with makepkg is not a good idea ) but you did missed Install_the_package
Also see Kernel_Modules so the module is loaded automatically at boot.
Seriously? I spent that many hours searching for my several error messages, trying to solve them, not wanting to ask for help without putting too much of my own effort into it and when I finally decide to ask for help it is when I didn't get a super essential thing like makepkg doesn't install and is merely to create .pkg.tar.xz?? Oh gosh... (;
Well, thank you! I guess I'll take my next change to use Google to find out how to use makepkg without --asroot. Yes, wl is loaded now and it's set as the kernel driver in use!
Unfortunately, after ip link set wlp2s0 up and typing dmesg | grep wl I get:
wl: module license 'Mixed/Proprietary' taints kernel.
wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
systemd-udevd[148]: renamed network interface wlan0 to wlp2s0
wl 0000:02:00.0: no hotplug settings from platform
wl 0000:02:00.0: no hotplug settings from platform
wl 0000:02:00.0: no hotplug settings from platform
wl 0000:02:00.0: no hotplug settings from platform
And therefor: No firmware loaded. Google doesn't give much about this message but hints to PCI or PCI-Express not working as it should. I found this and tried starting with pciehp.pciehp_force=1 and ordered a modprobe acpiphp but nothing changed.

Printing over FritzBox ist not possible with osx 10.8.5

I can not print with Networkprinter on Fritz Box with osx 10.8.5.
Is there any solution on this issue?
I'm using a Canon Pixma MP780.

It doesn't look like - from viewing this -> http://support.apple.com/kb/HT3669#canon-inkjet - list that the MP780 is still supported by Apple. I would suggest that you contact Canon support and see if they've a driver or 'fix' for this apparent incompatibility issue.
Good luck,
Clinton

I have PS6, and could happily upload CR2 files from my Canon EOS 6D AS CR2 files and could manipulate these in bridge. When I purchased a Canon 1Dx this was not possible - despite downloading plug ins it still converts my files to dng or jpegs - how do I

CR2 files for pr-manipulation in bridge.

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

Partial Return not possible

Hello,
This query is already being posted in SDN but the solution is not specified. So I thought of reopening it again.
I am using EBP 3.5, classic scenario, BBPCRM SP level is SAPKU35009. My requirement is whenever I try to do a return delivery, it does not allow me to select the item I want to return.
Lets say my shopping cart consists of three items. Now while confirmation, all three items are confirmed in EBP. When i try to do a return delivery here in EBP, the checkbox to select the individual items is disabled. So I am left with no option but to return all the three items even if I want to return only the second one.
I assume this must be the standard functionality but Is it possible to find a solution to this prob? Is there an OSS note available to do the same.
Need your help and advice to solve this.
Thanks in advance and anticipating replies..
Will reward full points if the issue gets solved.
Regards,
Sanaa

Hi Sanaa,
This is a SAP Standard feature. Please refer the link below.
Cancellation/Partial Cancellation Indicator
You can cancel items of a goods receipt confirmation.
It is not possible to effect quantity changes or to cancel items for which open invoice items exist.
When a cancellation document is posted, the relevant values are updated in the order item and the confirmation item. However, status changes do not occur in the confirmation.
<b>You can cancel backend service confirmations. You cannot carry out item selection here. You can only cancel the whole document.</b>
http://help.sap.com/saphelp_srm50/helpdata/en/d2/747c3a5934400be10000000a11402f/frameset.htm
Regards,
Rajeshree

Confirmation Control Key in PO update not possible with partial delivery

Hi gurus,
When I do a MIGO that a partial quantity of a PO and after, I will want confirm the rest of quantity of this position in ME22N, system doesn't allow add a confirmation!!
Confirmations only are posible if all quantity is pending???
Thank you!!
I will reward points all answers!!

Hi Daniel,
The confirmation functionality is used to get better visibility & control over the goods receipts. Due to this requirement, when you work with confirmations, the system will not propose any quantity for MIGO unless any confirmations are entered in the PO. Also, MIGO will propose only such quantity for which the confirmation is entered.
Now you will have two options:
1. If confirmation is mandt, then the Conf reqd check-box must be checked during ME21N. This will restrict the GR for confirmations only.
2. If confirmation is not mandt, then confirmation will not be possible after partial GR.
Hope this is helpful.
Cheers.
Keshav

Change of bin not possible during TO confirmation

Hi all.
I am trying to change the destination storage bin during transfer between bins (WM movement 309).
The strategy is fix bin (maintained in material master), so the TO is created with fix destination bin and operator must change it before confirmation.
For example, in GR it is possible to change destination bin during confirmation in transaction LT12 but not for transfer. The receiving storage type is the same in both cases. Is there any customizing missing?
Apart from this, is there any way to confirm items separately inside a TO? For example, during GR I try to confirm a TO in transaction LT11 for just one item and waiting for the rest to be placed physically in order to confirm all the TO but destination bin can not be modified in LT11. Is there any way to confirm item per item but allowing changing destination bin? it is possible to do it in LT12 but not in LT11.
Many thanks in advanced and best regards.

Hi,
Generally, it is possible to change the destination bin during TO confirmation. However, this is not possible under the following conditions:
o With dynamic coordinates
o If the destination bin location is specified in the movement type
o For posting change transfer orders
o For the physical inventory using a putaway
o For the addition to existing stock for storage units
o For the transaction Confirm Single Item (transaction LT11)
o If a bulk storage type is involved in the stock movement
o In the event of an individual putaway strategy
o If the first item of a TO with storage units is already confirmed
   since all the other items of the storage unit relate to the same
   storage bin. When you save the first TO item, the system changes
   the destination storage bin for all dependent items.
o If this is a replenishment transfer requirement for a fixed
   storage bin.
Please see SAP Note number 443916 for an explanation.
Thank you.
Patrick

Deleting confirmation not possible for particular PO item.

Dear experts,
we are on an SRM 5.0 server 550 with a classic scenario.
We are experiencing some problems when deleting confirmations on 1 certain process.
case:
- puchase order created with 1 item (10 pieces)
- confirmation was created for 5 pieces.
- invoice was created for these 5 pieces.
- confirmation created for the following 5 pieces
- trying to delete the confirmation but not possible because the delete button is greyed out
Does anybody has an idea why we cannot delete such a confirmation? There is an invoice on the PO item, but only on the first 5 pieces, not on the last 5...
Regards,
Tom

Hi,
Check the followwing points:
-Tx_RZ20. Check under menu Confirmations for Backend errors.
-Check Idocs exchanged. Check Outbound IDOCS(Type MBGMCR) in SRM an Inboudn Idocs in the backend.
-Check GR in Tx BBP_PD. Search using Object Type: BUS2203 and GR number. Search for alerts in the GR.
There is a recurrent root cause for the "GR error in process": Posting Date locked". You could try to change posting date to the currente date in th GR and confirm again.
Thanks and Regards,
Abraham

Is it possible to install a consumer app for mass usage that would alter the ios device proxy settings? Over the air not supervised. Can an app company use an MDM server to do this if the customer consents?

Is it possible to install a consumer app for mass usage that would alter the ios device proxy settings? Over the air not supervised. Can an app company use an MDM server to do this if the customer consents?

HI Chris,
Thanks for taking the time to reply.
Could you expand on your answer, which bit is very doubtful?
Also in your knowledge would Apple work with a company and license it if the software they were developing was desired by consumer demand?
Thanks
Gary

My iPhone 4s developed a WiiFi fault which it was not possible to resolve. The phone was just over 1 year old. I visited the Apple store to see a Genius. The only assistance they were able to offer to me was to sell me a reconditioned phone. Right?

My 1 year and 1 month old iPhone 4s developed a WiiFi fault which it was not possible to resolve. I visited the Apple store in Brighton for the assistance of a Genius. He too was unable to resolve the fault. He said that as the phone was over a year old that there was nothing that he could do for me as the phone carries a 1 year warranty. He offered to sell me a reconditioned iPhone 4s as a replacement. This cost me a further £150.00. I was/am still paying for the phone through my contract, the phone that I no longer have!
A work collegue had a similar fault with his iPhone, although his phone was older by approx 6 to 10 months. He did what I did and visited the local Apple store to see a Genius and was straight away offered a brand new replacement phone for no additional payment.
Has anyone else had a similar experience and does anyone have any advice? I am furious about this double standard of customer support! And I can not find a way to email to Apple directly for customer service advice!

Thank you for your advice. If I lived closer to the store I would do just that. By using the forum it was not my intention to breach any TOS.
I speak to collegues and people advise me to email to Apple. They say that Apple always looks after its customers. I only wish to find a way to email to Apple to see if there is anything that they can do for me. I suspect not.
You regular forum users appear to me to be well versed Apple device users and as such maybe you could point me in the right direction to be able to email to customer support as I can not find a link!

Confirmation not possible, no compertment allocated for load document

Hi expert,
Recently we have done upgradation from 4.7 to ECC 6.0. Now while doing testing in Sandbox after doing inbound delivery, when we are creating shipment document its not taking the compartment of the vehicle though the vehicle master is absolutely ok.
Its giving an error: Message No: 09031"Confirmation not possible, no compertment allocated for load document"
Can any one help.
Regards,
Amlan Neogi

I have resolved the issue.
regards,
Amlan Neogi

Total confirmation quantity not equal to planned confirmation quantity

HI
In co11. if i entered more than operation quantity
its showing warning message
Total confirmation quantity not equal to planned confirmation quantity
Message no. RU117
how can i change into error msg???
thanks in advance

Dear,
Go to OPJB then select
00000000 RU 117 Total confirmation quantity not equal to planned confirmation quantity E- Error.
It will work for you.
Regards,
R.Brahmankar

Quantity not confirmed in the STO

Dear All,
I have an issue in the Stock Transport Order.
While creating STO (UB), Material not getting confirmed.
Material is in Stock at Supplying plant.
I carried out availability check also. It is not yet confirmed.
What may be possibility of error. Any suggestions.
Regards,
Rajesh L

Hi,
STO PO Not confirmed means --> you can't save the PO.
Please explain
SAM

Confirmation over PO quantity not possible despite TOG tolerances

Similar Messages

Maybe you are looking for