Confirmation posted in SAP not replicated to SRM

Hi All,
We are having Extended Classic Scenario here. For a PO created in SRM, user has posted goods receipt in back end system(R/3) in the month of december 2013 but yet system has not replicated that as a confirmation in SRM. I ran BBP_GET_STATUS_2 where it shows "1 shopping cart item has been excluded ( due to ext.po status)", but sytem replciates successfully for other PO's. I ran Clean_ReqReq_up also, but no use.
What may be the reason? please clarify.
Regards,
Prasath

Hi Prasanth,
Please check the status of PO if the GR is posted without any errors. If it has posted successfully, then run BBP_GET_STATUS_2 with only this shopping cart detail. If it has not replicated again. please check the error messages in RZ20 as it could also be related to posting periods or other errors.
I hope it helps.
Regards
Bash

Similar Messages

R/3 Material description not replicating in SRM CC-Hubwoo

Hi experts,
I have an issue with the material description,
I dont have much knowlodge in EBP and im new to SRM.
Material description in R/3 and CC-Hubwoo are not matching.
Can any body help me regarding the issue.....
Thanks in advance,
Krish.

Hi
In SRM, use Transaction SM30
Go to Table - COMCHIERARCHY_
Amend the setting so that the following is checked:
Transfer 60 Character Description
This will now ensure that the 60 character material group description is replicated to SRM.
The OSS note (455949) SAP has given us long back works around CRM customizing path.
*To access it in SRM use SM30 on COMCHIERARCHY to use long description instead of short one.*_
Use
In R/3 system - T023T has short description (20 char) and long description ( 60 char ).
The description in SRM COMM_CATEGORYT has 80 char length.
See related pointers ->
overwriting SAP standard material description
Material Group description in SRM
How can i change the description of material when i create a SC?
Hope this will help. Do let me know.
Regards
- Atul

HR Org structure delta changes not replicating to SRM

Dear All,
We recently found out for some unknown reason new HR postions and users and HR org structure re-assignments are not replicating down into our SRM org strucure.
We have implemented SRM 4 on Server 5.5. The HR system is running on ECC4.
Does anybody have an idea what is causing this and how to fix this?
We need to get delta replication working in our production environmemt ASAP.
Thanks in advance.
Sheena

Hello Sheena,
I was not on the net last days. :o((
ECC 4.0, is that R/3 4.7 ex 2.00?
From your post I assume that you already transferred initial organization structures from HR. Is that correct?
Update will use the same filters and number ranges that you have for initial load. As for attributes, I am checking that also, but do not think that you will loose it.
Gordan

SUS user data not replicated to SRM

In service SRMSUS in the SUS system, we have user w/ role SAP_EC_SUS_ADMIN_VENDOR.
When this user modifies his own user data such as name/email/time zone, the change in user data is NOT replicated to the SRM system. The SRM user data still contains the original user information.
I believe user data update is done via a RFC call, and not XI. I've checked for security auth object and there are no authorization issues.
Are there any additional configs we're missing?
We're on SRM 4.0 / SAPKIBKS10 / SAPKB64019
I've already checked all the OSS Notes including, but they don't help, or pertain to my situation:
Note 893714 - SUS30: Replication of bidding users from SUS to EBP
Note 919070 - SUS-UM: User settings are not stored correctly

Hi,
you need to maintain the system details where the changed data needs to be replicated at the following customizing in SUS
1) Transaction SPRO --->
2) Path ---> Supplier Relationship Management ---> Supplier Self Services --->
Master Data --->Maintain Systems For Synchronization of User Data
( check help available with the customizing for more details ).
3) Maintain New Entry for the external systems ---> this should be your SRM system and then use the following data .
F. Mod.: Create User BAPI_USER_CREATE
F. Mod.: Change User BAPI_USER_CHANGE
F. Mod.: Delete User BAPI_USER_DELETE
4) save data
5) once you hav done this , when you make changes , data will be synchrozed with SRM

One new vendor created not replicated in SRM from ECC .why

Hi all
once in a moon vendor replication wont happen for certain new vendor so we edit xk02 and next vendor sync job it will be available in SRM but this time i hammered a vendor many times still not pulled into SRM . other new vendors created fine.
any restriction stopped you any clue is appreciated.
I can pull it in different way.but i want why some times sync job failED TO TRANSFER long name vendor more than 38
Muthu

HI Deva,
I am also facing similar kind of issue. where Vendor get updated in the BUT000 but not get updated in BBPM_BUT_FRG0061.
When i am running the MDS_LOD_COCKPIt. It is showing me Error Message as BP number Already Exist.
Kindly Suggest me Process, how to update the Table BBPM_BUT_FRG0061.
Qucihk reply will be highly appreciated.
Thanks
KHATRGA2

All items in ECC not replicated in SRM

Hi friends,
Currently we are working on SRM 5.5 as an addon to ECC 6.0.When we set up the SRM development system there were a few materials in ECC.We used the transaction MDS_LOAD_Cockpit to replicate first the material types,then the material groups and finally the materials.But it was observed that some materials dint get replicated.Later on whatever materials we have created in ECC are getting replicated automatically since we have scheduled some programs.
When i did try to manually replicate those materials using transaction MDS_LOAD_COCKPIT it was giving me an error " Base category not assigned to product" but we already have the material gropus replicated.How do i replicate those materials in SRM now.
Regards,
Pawan Agrawal

Hi Pawan,
Check for the filter settings for material in SRM using R3AC1 & R3AC3 T.codes and then replicate the material using R3AS T.code (Initial upload) / R3AC4 for delta upload.
Also check all the tables required to be maintained for Master data replication in both R/3 & SRM.
CRMCONSUM, CRMSUBTAB, CRMRFCPAR, CRMPAROLTP in R/3 & SMOFPARSFA in SRM.
The problem looks to be with filter settings for material as the other materials are getting replicated. Please check all the settings for master data replication carefully.
Hope this will solve your issue.
Award points for suitable answers.
Clarifications are welcome.
Rgds,
Teja

R/3 material number not replicated in COMM_PRODUCT and COMMPR01 in SRM

Hi SRM experts,
We have a problem when SRM user tries to raise order against Product A. He encountered an error "Incomplete items on Catalog, only complete Items transferred". Upon looking at COMM_PRODUCT table and COMMPR01 (product maintenance) in SRM, this Product A is not existing. What could be the reason why this product was not replicated in SRM? Among materials w/c belong to same Product Category are all exist in table except for this specific material. This, however, is existing in MARA and not flagged for deletion. I have checked the SMQ2 in SRM and no queues found.
Need your expert advice.
Thanks,
Madelyn

Hi
In SRM, use Transaction SM30
Go to Table - COMCHIERARCHY_
Amend the setting so that the following is checked:
Transfer 60 Character Description
This will now ensure that the 60 character material group description is replicated to SRM.
The OSS note (455949) SAP has given us long back works around CRM customizing path.
*To access it in SRM use SM30 on COMCHIERARCHY to use long description instead of short one.*_
Use
In R/3 system - T023T has short description (20 char) and long description ( 60 char ).
The description in SRM COMM_CATEGORYT has 80 char length.
See related pointers ->
overwriting SAP standard material description
Material Group description in SRM
How can i change the description of material when i create a SC?
Hope this will help. Do let me know.
Regards
- Atul

SAP Notes Issue

Hello Experts,
Actually I had an issue while opeing SAP Standard Query, this issue is due to some missing BI Content information then I requested Basis team to apply SAP Note, they came back to me saying that SAP Note is already applied, then immediately I tried to confirm whethere that SAP Note was implemented or not in the TCode:SNOTE in the Note Assistant Browser (I followed the procedure from "SAP BW Consistency Check Guideline" document) but I couldn't find my SAP Note when I searched there. Can anybody help me out is there any alternate way to find out SAP Notes which are existing in my BW System.
Thanks,
Roger

Hi Roger,
Generally two way we can find whether sap note implemented or not
1. Goto Txn SNOTE -> there you find whther you note implemented or not, if it is implemented you can see the Tick symbol
2. Manually you can check in the system, whether the corresponding changes already done asper the SAP Note or not. If that required changes have not been done then that note is not implemented.
Hope helps.
Regards,
Kiran

SAP Note 209864 - Moving average price is disproportionately large

Dear All,
We are having problems similar to what are described in the SAP Note 209864.
We run the example as decribed in the note on our development server and got the same results. Then, we run the tractsaction OMC0 to set the tolerance upper and lower limits to 10% for the moving average variance and run the example again but still got the same result. We do not know why.
In our production environment, some purchased materials may be returned to our warehouse from produciton after their stock quantities reach zero (and therefore their total stock values as well). If in the time between the material reaches zero stock value and any left over materials are returned to the warehouse, there are good receipts from our suppliers for those materials and the prices are much different from the original moving average prices (e.g. replacement parts that are free of charge). The value of the subsequent materials returned from the production to the warehouse will be valuated incorrectly.
We would like to control the vairance to a pre-defined percentage, e.g. 10-20%.
Please help.
Best regards,
Nelson

Dear,
Please refer the below SAP notes
SAP Note 356757-MR01, MR1M, MIRO: M8783 when posting invoices
SAP Note 753286 - Moving average price becomes very small
Regards,
Gopala.S

Deimplement SAP notes

Hello Gurus,
Do you know if is there any way to confirm if a SAP note that is implemented via SNOTE can be deimplemented? Is there a specific procedure to follow up to proceed with the deimplement process? Or do you just have to enter only to SNOTE -> Choose the Note -> "Click on Reset SAP note implementation"?
Thanks,
Regards

Hi,
Just check SAP note that you want to de-implement if there is no manual step involved in it then you can implement with step mentioned by you. If there is any manual step involved then you have to work accordingly.
Thanks
Sunny

SRM shopping cart attachment to SAP not transferring

Hi SRM Experts,
I have an issue with document attachment which is not coming to SAP R/3 Backend.
Scenario 1
1.Create shopping Cart in SRM system with One attachment,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment is not exists only document number exists in the DMS (CV03N - No attachment)
Scenario 2
1.Create shopping Cart in SRM system with TWO attachments,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only one attachment exists and other attachement document number only exists in the DMS (CV03N - No attachment)
Scenario 3
1.Create shopping Cart in SRM system with FOUR attachments,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only THREE attachments exists and Fourth attachement document number only exists in the DMS (CV03N - No attachment)
From the above all its understood that last attachmen is not transfered to SAP . In Scenario 1 last attachement will Only one attachment.
Its Strange issue, can any one face this sort for issue before, kindly let me know what could be the casue,
Note - I have posted the same issue in DMS thread as well
Cheers...Gopinath

Hi Guru's,
I am using SRM 7.0 and while i create an attachment in shopping cart and try to send it in ECC, the attachment is not reflecting .
Since we are using the latest version of SRM, we have used BADI BBP_CREATE_BE_RQ_NEW
(Method IF_EX_BBP_CREATE_BE_RQ_NEW~FILL_RQ_INTERFACE.).
I have also gone through the below link and tried the implementation :
http://wiki.sdn.sap.com/wiki/display/SRM/BBP_CREATE_BE_RQ_NEW-CreateRequisitionin+backend
Also, all ECC configuration are in place. However things are not come in place. Only the details are reflected but the attachment is not reflected in ECC.
If anyone can guide the correct way in SRM BADI along with ECC configuration (just to verify) will be a great help.
Kind Regards,
Kunal.

SAP Notes for Deleted Shopping Carts in SRM 7.02 in ECS

Hi ,
I am having an issue in SRM 7.02 in Extended Classic Scenario, Where Users are able to delete Shopping Carts even after Follow on Document created i.e. till Confirmation. Now they want to delete the SRM PO. As there is no Shopping Cart existing in SRM they are unable to delete the PO.
Can you please suggest me the SAP Note relevant to this Requirement.
Regards,
Raju.

Hello Raju,
check below KBA:
1649794 - Status dependent control of Shopping Cart
At the end of the KBA, OSS notes are listed. Check them.
Regards.
Laurent.

Attachment is not transfering from SRM to SAP R/3 Backend

Hi DMS Experts,
I have an issue with document attachment which is not coming to SAP R/3 Backend.
Process.
1.Create shopping Cart in SRM system with attachment,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment is not exists only document number exists in the DMS (CV03N - No attachment)
can any one face this sort for issue before, kindly let me know what could be the casue,
Cheers...Gopinath

Hi Gopinath,
could you please check if there is really no original file attached to the document info record. Therefore please execute report DMS_KPRO_READ in transaction SE38.
Further please see also the information on page http://wiki.sdn.sap.com/wiki/display/PLM/Error26296in+CV01N.
Best regards,
Christoph

SRM shopping cart attachment to SAP not transfering

Hi DMS Experts,
I have an issue with document attachment which is not coming to SAP R/3 Backend.
Scenario 1
1.Create shopping Cart in SRM system with One attachment,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment is not exists only document number exists in the DMS (CV03N - No attachment)
Scenario 2
1.Create shopping Cart in SRM system with TWO attachments,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only one attachment exists and other attachement document number only exists in the DMS (CV03N - No attachment)
Scenario 3
1.Create shopping Cart in SRM system with FOUR attachments,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only THREE attachments exists and Fourth attachement document number only exists in the DMS (CV03N - No attachment)
From the above all its understood that last attachmen is not transfered to SAP . In Scenario 1 last attachement will Only one attachment.
Its Strange issue, can any one face this sort for issue before, kindly let me know what could be the casue,
Cheers...Gopinath

Issue found with enhancement made by us in Class(SRM System). Same has been fixed. now its working, Thanks to all.
Cheers...Gopi
Edited by: Gopinath A.R on Mar 11, 2010 9:04 PM

Replicated vendor not visible in SRM

Hi all
I have one problem. I have got the vendor which is to my understanding replicated to SRM. In synchronization cockpit I received the error message that the business partner already exists. Fine...I check it in the PPOMV_BBP and the vednor is displayed there but strangely it is not assigned to any vendor group. Hence this vendor cannot be used at shopping cart creation.
Any idea how to assign it to vendor group? Usually during the regular replication the vendors are by default assigned to vendor groups. We are using Add-on, release 5.5.
Thank you all a lot for any hint.
Miha

Hi,
I have had a similar problem. My advise is to try to change the vendor address in the backend system, for example the street or the post code, and after that to replicate again only this vendor in SRM by transaction BBPUPDVD. Do not forget to check the log in SLG1!
After that go to PPOMV_BBP, and try to find the vendor, first as a vendor and after that as BP. If in both cases you managed to find it - everything is ok.
After that you can go back in the backend and return the old address of the vendor and replicate again. It worked for me!
Hope this will help you!
Desi

Confirmation posted in SAP not replicated to SRM

Similar Messages

Maybe you are looking for