Confirmation required about XI-XI communication
Hello experts,
I am successful in establishing XI to XI communication using XI adapter. Since with this, the message is posted directly into to pipeline of the 2nd XI instance, I wanted to make sure what all pipeline steps can be carried out there. My requirement is to do the structural mapping there in XI2.
Thanks,
Amol
<i>I wanted to make sure what all pipeline steps can be carried out there. My requirement is to do the structural mapping there in XI2.</i>
>>>
Yes, you should be able to do the required in XI2.
Similar Messages
-
Confirmation required about case structure in cursor
Hi,
I have been trying to use a case when structure inside a cursor in a stored procedure with regular expressions in it, but its throwing compilation error.
The error message does seem to be irrelevant.
Just want to know whether there is any limitation of using case when structure inside a stored procedure in a cursor.
If no limitation like that, then will try again to debug it.
-MDManas Datta wrote:
Hi,
I have been trying to use a case when structure inside a cursor in a stored procedure with regular expressions in it, but its throwing compilation error.
The error message does seem to be irrelevant. No it is not. The error message will tell you what oracle or the compiler thought what is wrong. Try to understand it.
Just want to know whether there is any limitation of using case when structure inside a stored procedure in a cursor.
If no limitation like that, then will try again to debug it.
-MDBe aware that the syntax of the case statement is slightly different beween SQL and PL/SQL. -
Using confirmation requirement
Hello Folks!
I just like to confirm something about confirmation requirement.
1. Confirmation Requirement according to SAP library is :
"Confirmation Requirement
If confirmation is required, the quantity of material transferred into or out of the warehouse is not available for use until the transfer order or item has been confirmed.
You set the confirmation requirement using the WM customizing application."
I am unclear for the following reasons:
1. SAP course manual says :
"If there is no confirmation requirement, the system automatically confirms the quantities when you create the transfer order".
Part 1 :
This sounds like when using confirmation requirement, there is NO Automatic Confirmation of TO. So, how is it confirmed? Manually via another tcode by the pioker? What is the purpose for not using Automatic confirmation?
When is Confirmation Requirement activated?
Part 2:
What is meant by "...the system automatically confirms the quantities when you create the transfer order".
When you create a TO, its not yet printed. So, does this statement imply that the TO is also printed and picking is already done ?
Part 3:
If not fully picked , will the system still automatically confirm the quantities as fully picked?
Is "confirm the quantities" = confirm that quantities have been fully picked or there is picking done either fully or partially?
Have a wonderful day...
Regards
JohnV_OBJ = SY-MANDT.
SELECT SINGLE RUECK RMZHL INTO (V_RUECK, V_RMZHL) FROM AFRU WHERE AUFNR EQ Order_No AND GRUND = 'WORK'.
CONCATENATE V_OBJ V_RUECK V_RMZHL INTO V_OBJ.
l_header-tdobject = 'AUFK'.
l_header-tdname = V_OBJ.
l_header-tdid = 'RMEL'.
l_header-tdspras = 'EN'.
if strlen( TEXT ) GT 40.
update AFRU set TXTSP ='E' WHERE AUFNR EQ Order_No.
endif.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = l_header
INSERT = 'X'
SAVEMODE_DIRECT = 'X'
TABLES
LINES = t_textlines.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
name = V_OBJ
savemode_direct = 'X'.
CLEAR : V_RUECK, V_RMZHL, V_OBJ , L_HEADER.
Here, t_textlines is a long text( set of lines in th elong text) -
how do i get this confirmation required screen off of the itune page
Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
Hi
My iPhone is blocked in that I can not either "buy" or "cancel" the purchase of my next song because there is no response when the "confirmation required" is tapped in.
Please help ...Hi ...
Tap Settings > General > Reset > Reset All Settings
Then restart the device.
Hold the power button until "slide to power off" appears. Slide to power off. After it is off, press the power button to turn it back on. -
Manual vs WM system and Confirmation Requirement
Hello ,
I would like to clarify the following regarding confirmation requirement.
Am I right to say, in a WM scenario,
1. Confirmation can be activated or not activated with a flag. In a non-WM situation, where user also manually enter the picked quantity, confirmation requirement is Not applicable.
2. Confirmation Requirement is an Verification process to check how many is actually picked. If fully picked, user goes into DO screen and enters the picked quantity in the 'picking quantity' field and no change to the delivery quantity which is the order quantity. Then where confirmation requirement is activated, a user will confirm the TO via LT12 and this leads to the wm activity status set to C automatically.
3. If not fully picked, actual picked quantity is entered in picking quantity and delivery quantity is set to this same value. The picking status will still be shown as C, fully picked because the TO is saved. During confirmation, user enters the difference using the indicator and now PGI can happen as wm status is set to C for partially picked quantity. User will process the balance in separate steps. The Difference Indicator is based on comparing the Ordered Quantity with the Delivered (or Picked Qty?)
4. In a non-wm situation, wm activity status is disabled or not applicable. Only picking status is applicable. Once fully picked, this quantity is entered same as the delivery and order quantity, the picking status is set automatically to C. Now, the Goods Issue can be processed.
regards
Pascal
Edited by: Pascal Gabin on Feb 5, 2011 2:37 PMbump * pls
-
What are the authorization requirements for an EDI communication user?
I'm trying to find documentation describing the authorization objects required for an EDI communication user to have appropriate RFC access.
Take a look in the FAQ thread at the top of the (security) forum...
Is there something in addition to the standard documentation which you would like to know?
Cheers,
Julius -
Confirmation required won't leave screen
I made a purchase and it went thru and is working. But when I went into update aps on my itouch the screen come up CONFIRMATION REQUIRED
Do you still want to buy 100K credits fo .99?
Cancel Buy and its locked won't let me do anytingI have the same problem. I can do other things, but every time I come back to the app store it comes back to this screen.
-
Requirement about transport tracking
Hi,
I have this small requirement about transport tracking.
A transport might have lot of tables referenced. I need to find out, what is the difference, between the tables in one system, and the tables in another system, say between development system, and production system. Any leads on this would be helpful. Thanks for the help in advance.
Regards,
VijayHai Srikanth,
These links may be helpful to you..just check them out.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7ce5c590-0201-0010-388e-cc28510abb89
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a9039a90-0201-0010-c39d-c7173438ea0d
Regards,
Srikanth. -
Hello,
"If there is no Confirmation Requirement, the system automatically confirms the quantities when you create the
transfer order."
I like to confirm that 'confirm the quantities' means picked qty = required qty , as in fully picked?
and that means as long as picked qty not equal to the ordered qty, the TO is not or cannot be confirmed.
I am asking because a SAP Library content has it that "You process differences when you confirm a transfer order. This results in the update of the stock levels in WM. Afterwards, you need to clear the WM differences in the IM component."
From the above, seems like confirming a TO is a process and the result of this process can be fully picked or partially picked or not picked. So, does this mean to confirm a TO does not mean it is confirmed?
secondarily:
If a TO is not confirmed but partially picked , what status is the TO having?
If picking was attempted but picked qty = 0, is there a status for this?
Thanks!
regards
J Tivoli
Edited by: johntivoli on Jan 14, 2011 4:39 AMDear Kris,
Thanks so much.
To finalise, when confirmation requirement is configured, when a TO is created, it is immediately and automatically confirmed as Fully Confirmed or 'confirmed' as in a either full or partial quantity picked?
If TO is automatically set to fully picked and fully confirmed, then this is strange to me because, in real life, a TO may not be confirmed immediately or due to some reasons.
Hope to get clarification.
Thanks.
John
Edited by: johntivoli on Jan 21, 2011 8:31 AM -
Important Updates Required for CIsco Unified Communications Manager Versions 7.1 - 9.1
Folks,
I recently received an Email our Cisco SE letting us know about a specific security hole in CUCM that I figured that you might be interested in:
As your account team, we wanted to make you aware of an important update to Cisco Unified Communications Manager that addresses a security flaw discovered on June 6th. This flaw, if unpatched, could allow a remote attacker to gain access to your Communications Manager. Cisco has released a Cisco Options Package (COP) file for each of the affected versions to mitigate the vulnerability. The updated COP file, cmterm-CSCuh01051-2.cop.sgn, is available on CCO for download now and is located under the Utilities section of the software downloads page for each of the affected versions.
The full details of this vulnerability can be found in the security advisory page: cisco-sa-20130717-cucm - Multiple Vulnerabilities in Cisco Unified Communications Manager. If you have issues downloading the update file or questions about the vulnerability, please don't hesitate to contact your account team so we can assist in you getting access to this.Hi Craig,
From the ReadMe;
Installation Instructions:
As with any installation or upgrade, it is recommended that you apply this Update during off peak hours.
When applying this Update be advised that a clusterwide reboot is required.
This update must be installed on all machines in the cluster before the cluster is rebooted.
Installation to all machines in the cluster is required; you must start with the Publisher. After the Update has been applied
to all servers you will need to reboot the entire cluster. See
Rebooting the Cluster for detailed instructions.
This package will install on the following System Versions:
7.1.3.10000
xx or any higher version starting with 7
.1.3.xxxxx
7.1.5.10000
xx or any higher version starting with 7.1.5.xxxxx
8.5.1.10000
xx or any higher version starting with 8.5.1.xxxxx
8.6.2.10000
xx or any higher version starting with 8.6.2.xxxxx
9.1.1.10000
xx or any higher version startin
g with 9.1.1.xxxxx
http://www.cisco.com/web/software/282204704/18582/ReadmeForBlindSQLinjectionCOPfile.pdf
Cheers!
Rob -
Some general questions about Sun Java Communications Suite
Hello Everybody,
We are a small group of individuals (2 Java developers and 1 Linux expert and Web Application developer), located in Germany.
We are fully new to �Solaris� and Sun Java Communications Suite and know, that it�s a highly professional software system for large scale deployment. However we plan to install (64 Bit version) and manage it in a small network environment, consisting of a Server (4 GB RAM, RAID 5, AMD Dual CPU) based on Solaris 10 (X86) and *20* clients based on Win XP, Solaris and Linux.
It�s a network of a non-profit organization, providing social services to local society.
At clients we will use the Communications Express and the needed services are: Calander, Mail and Address book. (no need of Outlook Connector, Instant Messaging, Document Management, etc.)
Our long-term aim is - after learning of professional architecting, deployment and management of Communications Suite - to provide integration and development services to organizations (schools and small / medium sized Business) and public in cooperation with ISP or infrastructure-providers like Sun Microsystems.
Now, our main questions are:
*1.-* Is the Server phy. recourse enough to deliver the mentioned services of Communication Suite to 20 clients without problems?
*2.-* Isn�t Communications Suite oversized for such small network mentioned above or better, if we use another collaboration software system like Opengroupeware (http://opengroupware.org/) ? Opengroupeware is developed using non-java lang and therefore doesn�t match our strategy.
*3.-* Does the Communications Suite download-pack includes all necessary components of Sun Java ES (Directory Server, Access Manager, etc.) or these components are to be downloaded separately?
*4.-* What is the difference between the Sun Java System Messaging Server and the Sun Java System Message Queue?
We appropriate very much your answers and any further useful information regarding our project.
Thanks
Asghar1> I believe your hardware can support 20 users (you might need to tune the Web Server heap size) - I had a Sparc 2x450mhz w/ 2GB of ram supporting 50+ users quite comfortably - with roughly half using POP and the other half IMAP/webmail. Ideally though, for best performance you would want to break up the main servers (LDAP, WEB, and MS) between hosts) - probably not necessary for 20 users. Having all on one machine simplifies things too (but also makes it a single-point-of-failure). Your disk obviously is important, the faster the better - that it's redundant is also nice - larger deployments might use much fancier storage systems to provide speed and redundancy, and use an the App Server instead of the Web Server as a container for Comms Express.
2> I don't think it's "oversized" - might you mean overkill? In this case I don't think overkill is a bad thing. Why not have very capable software, even if you don't really need it -is how I see things.
3> I believe you get all you need in the download. Though I've never tried the 64bit version (which I am guessing is only really necessary for larger deployments where you want to obtain maximized performance for heavier loads). I recommend following the single host evaluation document to get the hang of the install.
4> I'm not sure - though the Messaging install I believe requires the MQueue stuff, I think it's sort of an API for messaging, also available separately, but used by JES Messaging system?
Good Luck,
s7 -
BADI confirmation required.
Hello experts,
Can u please help me with the below requirement how i should proceed.
u2022Trigger a packing instruction IDoc from ECC to MII whenever the packing instructions are created/changed in ECC via t-code POP1/POP2.
As per my R&D, i found that BAdi- PL_PACK_INSTR_BADI will be implemented in POP1/POP2 t-code to trigger the packing instruction IDOC. This BAdi will be triggered after the packing instruction is created/changed in ECC.
I will trigger a idoc if the packing inst are created/changed in ECC to MII.
u2022Trigger a packing instructions IDoc from ECC to MII whenever a new or existing material with packing instructions are extended to an MII enabled plant in ECC via t-code MM01.
As per my R&D, i found that BAdi- BADI_MATERIAL_REF(not sure) will be implemented in MM01 t-code to trigger the packing instruction IDOC. This BAdi will be triggered when a material with the packing instruction is extended to MII enabled plant.
I will trigger a idoc if the packing inst are created/changed in ECC to MII.
Just want to confirm from experts, whether the BADI's found can be implemented or not for material with packing instructions.
Experts please provide your valuable suggestions
regards,
NTGS.
Edited by: ntgs_sap on Feb 21, 2012 9:08 AMHi experts,
Any update on above.
Regards,
NTGS -
We have two Nexus 7000, and I need use them with OTV between two data Centers separated 25 miles, but I don´t know what are the optimal values about bandwidth and delay (ms) for extended VLANs IDs (production and DAG replication) for Microsoft Exchange environment. Can somebody tell me please which are the values required for operate OTV in optimal conditions in this case? We have about 35 000 users that will use that platform of email. Thanks a lot for your comments. Regards.
We have two Nexus 7000, and I need use them with OTV between two data Centers separated 25 miles, but I don´t know what are the optimal values about bandwidth and delay (ms) for extended VLANs IDs (production and DAG replication) for Microsoft Exchange environment. Can somebody tell me please which are the values required for operate OTV in optimal conditions in this case? We have about 35 000 users that will use that platform of email. Thanks a lot for your comments. Regards.
-
Latest information required(about patches and kernael)
Hi all,
Our present SAP version is 4.7E ,Oracle is 9.2.0.7 and kernel is 6.40(patch level 121).basis patch level KB62060,Abap KA62060 .We do not have solution manager upto now.
Please give your good suggestions
1. what is required patch level to maintain ?
2.what is end for supporting SAP 4.7E and oracle 9.2.0.7?
3. what are your suggestions for future implementation?
Regards
Nani.Hi nani,
1. what is required patch level to maintain ?
SP level looks good but kernel looks pretty old , you can plan for a kernel upgrade.
2.what is end for supporting SAP 4.7E and oracle 9.2.0.7?
SAP R/3 Enterprise 47x110 - Extension of Mainstream Maintenance from December 2006 until end of March 2009
SAP R/3 Enterprise 47x110 and 47x200 - Extended Maintenance from April 1, 2009 until the end of March 2012 (first year: additional fee + 2%, next 2 years: additional fee + 4% per year).
3. what are your suggestions for future implementation?
You should think about upgrading to ECC 6.0 and also implementing Solution Manager.
thanks
Prince
Maybe you are looking for
-
I keep getting error message when trying to burn photos in iphoto
After I select burn in Iphoto it acts like its doing it then I get a message saying the Super Drive failed. The disk drive didnt respond properly and cant recover or retry. What can I do to fix this. Thanks Jen
-
I move my pics from iPhoto to iDVD after arranging them in order via sharing. They open in iDVD and are in my order under the "media/photos" window. I "select all" and move them onto my iDVD theme window. BUT... when I play them back they are all ou
-
SOA 11g value addition to business
Can any provide any document/presentation, which presents all the value additions to client bsuiness if it migrates from SOA 10g to 11g? Regards pidi
-
Photos of contacts from messages
Hello, I have a problem and I can't solve it :x My messages contacts are from SIM and that way I can't put photos in them. How can I change to put pictures there? Thank you
-
Is sql as a language free for production use ?
is sql and pl/sql as a languages free for production use ? and if you wanna help me , tell me about programming languages in general ? thanks in advance