Confirmation required won't leave screen

I made a purchase and it went thru and is working.  But when I went into update aps on my itouch the screen come up CONFIRMATION REQUIRED
Do you still want to buy 100K credits fo .99?
Cancel   Buy  and its locked won't let me do anyting

I have the same problem. I can do other things, but every time I come back to the app store it comes back to this screen.

Similar Messages

  • My ipod is stuck on confirmation required screen and it will not let me do anything in itunes what do i need to do

    how do i get this confirmation required screen off of the itune page

    Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

  • Manual vs WM system and Confirmation Requirement

    Hello ,
    I would like to clarify the following regarding confirmation requirement.
    Am I right to say, in a WM scenario,
    1. Confirmation can be activated or not activated with a flag. In a non-WM situation, where user also manually enter the picked quantity,  confirmation requirement is Not applicable.
    2. Confirmation Requirement is an Verification process to check how many is actually picked. If fully picked, user goes into DO screen and enters the picked quantity in  the 'picking quantity' field and no change to the delivery quantity which is the order quantity.  Then where confirmation requirement is activated, a user will confirm the TO via LT12 and this leads to the wm activity status set to C automatically.
    3. If not fully picked, actual picked quantity is entered in picking quantity and delivery quantity is set to this same value. The picking status will still be shown as C, fully picked because the TO is saved. During confirmation, user enters the difference using the indicator and now PGI can happen as wm status is set to C for partially picked quantity. User will process the balance in separate steps. The Difference Indicator is based on comparing the Ordered Quantity with the Delivered (or Picked Qty?)
    4. In a non-wm situation, wm activity status is disabled or not applicable. Only picking status is applicable. Once fully picked, this quantity is entered  same as the delivery and order quantity, the picking status is set automatically to C. Now, the Goods Issue can be processed.
    regards
    Pascal
    Edited by: Pascal Gabin on Feb 5, 2011 2:37 PM

    bump * pls

  • Firefox is unable to update to 7.0.1. I get an error that The operation can't be completed because the item "libsmime3.dylib" is in use. I found this is a Cisco folder, tried to trash it, but it won't leave. Maybe I need it?

    The operation can’t be completed because the item “libsmime3.dylib” is in use.
    This is the error message I get when i try to install the 7.0.1 update. I found a cisco folder on my MAC and tried to Trash it. It won't leave. Maybe I need it... Some of it did Trash, but what ever is left continues to prevent 7.0.1 from installing.

    OK I looked at an old Apple forum and someone suggested Trash then Restart then Empty Trash, and it worked. Cisco is gone, Opt is gone, and I was able to load FireFox. I had to give admin passwords to do this too. Why an old weird game or library folder could cause such obstacles is a wonder. But I'd rather wonder about other things...

  • Custom leave screen creation with feature of uploading doctor's certificate

    Hi Experts,
    In our ESS / MSS implementation project we have to create custom leave screen. In the leave screen, we have to provide following feature:
    The employee has to provide the scanned copy of doctor's certificate while applying for sick leave. For this, the leave entry screen should have a browse button. When the employee will click on browse screen one window should pop-up. Here the employee has to browse and attach the scanned doctor's certificate. The certificate will be attached to the leave application.
    Later on when the Manager will login he should see the leave request along with doctor's certificate attached by employee.
    How we can achieve this?
    Regards,
    Gary

    Hi Gary,
    Did u have a discussion with ur work flow and Netweaver Consultant? We had developed the same by writing some BSP's . Pl check with work flow and EP consultants.
    Laxmi.

  • Problem with Call Screen and Leave Screen !

    Hi,
    I am calling Modal screen (Dialog Pop up screen) from my first screen by 'Leave to Screen 'nbr' ' then once user enter the value in the pop up screen then I haveto display value with TABLE in Final screen as 'Normal screen'  here I am  using LEAVE to SCREEN, but after this call - my new final screen is not displaying as noraml screen it also displaying like 'Modal Screen' Like big pop scrren.!!
    When I tried final CALL by using CALL SCREEN instead of LEAVE screen the final screen with  table is dispalying fine as Normal screen but its returning control to pop-up screen which I dont want.
    I like Screen flow as 1>2>3--->1
    Help me to solve this Problem.
    Regards
    James

    Hi,
    Check the below thread,
    Unable to close Modal dialog box
    1) 1st screen--> 2nd screen --> Use CALL SCREEN.(This is Modal Screen)
    2) 2nd Screen-->(ModalScreen so you need come back) use the above thread
    3) Still on 1st screen--> Use CALL SCREEN --> To 3rd Screen
    4) 3rd Screen back to First Screen -> use LEAVE TO SCREEN First_Screen_NO.
    Cheerz
    Ram

  • Different between LEAVE SCREEN & SET SCREEN 0

    Hi there,
    I have a program where I have the main screen and another one.
    to call the secondary screen I used CALL SCREEN 0200. However I have doubt when I'm executing the BACK.
    I don't know the different between SET SCREEN 0. and LEAVE SCREEN 0100.
    when 'BACK'.
    SET SCREEN 0.
    OR
    LEAVE SCREEN 0100.
    Can anyone tell me what is the different?
    Thanks in advance
    Alexis

    Hi,
    Set Screen
    Syntax
    Set screen <number>.
    In module pool program
    Case okcode.
         When  u2018DISPu2019.
              Set screen 200.
         When u2018LISTu2019.
              Set screen 300.
    Endcase.
    In this case, the entire processing of current screen takes place and then the system branches out to next screen. If you want to branch out to the next screen without processing the current screen, LEAVE SCREEN should be used along with the SET SCREEN.
    For Example:
    Case okcode..
         When  u2018DISPu2019.
              Set screen 200.
              Leave Screen.
         When u2018LISTu2019.
              Set screen 300.
              Leave Screen.
    Endcase.
    When SET SCREEN is used, control cannot be transferred to the main screen or previous screen, unless you write code for the same.
    Leave to screen
    To SET a new screen without processing current screen, you need to use the following two statements together:
    SET SCREEN 200.
    LEAVE SCREEN.
    Or a Single statement
    LEAVE TO SCREEN 200.
    Regards,
    Bhaskar

  • How to make required field on selection screen in Query

    i'm now working with query(SQ01).
    but don't know how to make required field on selection screen in Query.
    thanks in advance

    i'm now working with query(SQ01).
    but don't know how to make required field on selection screen in Query.
    thanks in advance

  • How to leave screen pocessing in below code

    Hi all,
    I have alv tree, while adding node i get some input from user. so i have created a screen with two fields on continue i want to create a node based on the user entered values.
      METHOD handle_node_ctxt_menu_sel.
        CASE fcode.
          WHEN 'ADD_NODE'.
            CLEAR gs_node_lay.
    *        CALL SCREEN 102 STARTING AT 10 5 ENDING AT 40 5.
            CALL SCREEN 102 STARTING AT 50 5 ENDING AT 100 8. " After the user enter value i want to return cursor to this add   " node method but at present the screen remains same. Cursor not leave to add node.
            CALL METHOD gcl_tree->add_node
              EXPORTING
                i_relat_node_key     = node_key
                i_relationship       = cl_gui_column_tree=>relat_last_child
    *        IS_OUTTAB_LINE       =
                is_node_layout       = gs_node_lay
    *        IT_ITEM_LAYOUT       =
                i_node_text          = gv_node_text
              IMPORTING
                e_new_node_key       = gv_new_key
              EXCEPTIONS
                relat_node_not_found = 1
                node_not_found       = 2
                OTHERS               = 3
            BREAK-POINT.
            IF sy-subrc <> 0.
              MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
            ENDIF.
            CALL METHOD gcl_tree->frontend_update.
          WHEN 'ADD_CHILD'.
          WHEN OTHERS.
        ENDCASE.
      ENDMETHOD.                    "handle_NODE_CONTEXT_MENU_SELECTED
    Edited by: Lisa Roy on Jun 15, 2011 5:59 AM

    Hi Lisa,
    After user enters value in Screen 102, lets say CONTINUE is pressed. In PAI for 102 for OK_CODE 'CONTINUE' use
    SET SCREEN 0.
          LEAVE SCREEN.
    Your processing will then start from CALL METHOD gcl_tree->add_node
    Regards
    Rajvansh

  • My iPad 2 won't start, screen stays balck even plugs into charger for 15 minutes. What can i try?

    my iPad 2 won't start, screen stays black while  plugged into charger. What can i try?

    Hello Bfreilicher,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Best of luck,
    Mario

  • IPad won't full screen on videos

    My iPad 2 won't full screen on videos. Not just safari and youtube. Thanks for any help!

    Factory restore?
    Just make sure u make a backup first.

  • Why won't my screen turn when the phone does?

    why won't my screen turn when the phone does?

    Not all apps support screen rotation. The Home screens do not rotate. But also check to make sure you have not locked screen rotation. Swipe up from the bottom of the screen to reveal the Control Center and check that rotation lock is not on.

  • Using confirmation requirement

    Hello Folks!
    I just like to confirm something about confirmation requirement.
    1. Confirmation Requirement according to SAP library is :
    "Confirmation Requirement
    If confirmation is required, the quantity of material transferred into or out of the warehouse is not available for use until the transfer order or item has been confirmed.
    You set the confirmation requirement using the WM customizing application."
    I am unclear for the following reasons:
    1. SAP course manual says :
    "If there is no confirmation requirement, the system automatically confirms the quantities when you create the transfer order".
    Part 1 :
    This sounds like when using confirmation requirement, there is NO Automatic Confirmation of TO. So, how is it confirmed? Manually via another tcode by the pioker?  What is the purpose for not using Automatic confirmation?
    When is Confirmation Requirement activated?
    Part 2:
    What is meant by "...the system automatically confirms the quantities when you create the transfer order".
    When you create a TO, its not yet printed. So, does this statement imply that the TO is also printed and picking is already done ?
    Part 3:
    If not fully picked , will the system still automatically confirm the quantities as fully picked?
    Is "confirm the quantities" = confirm that quantities have been fully picked or there is picking done either  fully or partially?
    Have a wonderful day...
    Regards
    John

    V_OBJ = SY-MANDT.
        SELECT SINGLE RUECK RMZHL INTO (V_RUECK, V_RMZHL) FROM AFRU WHERE AUFNR EQ Order_No AND GRUND = 'WORK'.
        CONCATENATE V_OBJ V_RUECK V_RMZHL INTO V_OBJ.
        l_header-tdobject = 'AUFK'.
        l_header-tdname = V_OBJ.
        l_header-tdid = 'RMEL'.
        l_header-tdspras = 'EN'.
        if strlen( TEXT ) GT 40.
        update AFRU set TXTSP ='E' WHERE AUFNR EQ Order_No.
        endif.
        CALL FUNCTION 'SAVE_TEXT'
          EXPORTING
            CLIENT          = SY-MANDT
            HEADER          = l_header
            INSERT          = 'X'
            SAVEMODE_DIRECT = 'X'
          TABLES
            LINES           = t_textlines.
        CALL FUNCTION 'COMMIT_TEXT'
          EXPORTING
            name            = V_OBJ
            savemode_direct = 'X'.
        CLEAR : V_RUECK, V_RMZHL,  V_OBJ , L_HEADER.
    Here, t_textlines is a long text( set of lines in th elong text)

  • If we run rapidwiz in oracle it won't installation screen so what do

    if we run rapidwiz in oracle it won’t installation screen so what do ? more over o/s is Linux ?
    Is it enough to run xhost+ ?

    995706 wrote:
    if we run rapidwiz in oracle it won’t installation screen so what do ? more over o/s is Linux ?
    Is it enough to run xhost+ ?How do I ask a question on the forums?
    SQL and PL/SQL FAQ

  • TS2634 Why won't my screen orient for a movie on the dock?

    Why won't my screen orient for a movie on the dock?  It used to.

    Are you by any chance using Netfix when this happens. If you are, I believe that this changed in their last app update. The movies will only work in landscape mode.
    If you are not using Netfix and you are using the videos app, close the app and reboot the iPad.
    Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Maybe you are looking for