Confirmation requirement
Hello,
"If there is no Confirmation Requirement, the system automatically confirms the quantities when you create the
transfer order."
I like to confirm that 'confirm the quantities' means picked qty = required qty , as in fully picked?
and that means as long as picked qty not equal to the ordered qty, the TO is not or cannot be confirmed.
I am asking because a SAP Library content has it that "You process differences when you confirm a transfer order. This results in the update of the stock levels in WM. Afterwards, you need to clear the WM differences in the IM component."
From the above, seems like confirming a TO is a process and the result of this process can be fully picked or partially picked or not picked. So, does this mean to confirm a TO does not mean it is confirmed?
secondarily:
If a TO is not confirmed but partially picked , what status is the TO having?
If picking was attempted but picked qty = 0, is there a status for this?
Thanks!
regards
J Tivoli
Edited by: johntivoli on Jan 14, 2011 4:39 AM
Dear Kris,
Thanks so much.
To finalise, when confirmation requirement is configured, when a TO is created, it is immediately and automatically confirmed as Fully Confirmed or 'confirmed' as in a either full or partial quantity picked?
If TO is automatically set to fully picked and fully confirmed, then this is strange to me because, in real life, a TO may not be confirmed immediately or due to some reasons.
Hope to get clarification.
Thanks.
John
Edited by: johntivoli on Jan 21, 2011 8:31 AM
Similar Messages
-
how do i get this confirmation required screen off of the itune page
Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
Using confirmation requirement
Hello Folks!
I just like to confirm something about confirmation requirement.
1. Confirmation Requirement according to SAP library is :
"Confirmation Requirement
If confirmation is required, the quantity of material transferred into or out of the warehouse is not available for use until the transfer order or item has been confirmed.
You set the confirmation requirement using the WM customizing application."
I am unclear for the following reasons:
1. SAP course manual says :
"If there is no confirmation requirement, the system automatically confirms the quantities when you create the transfer order".
Part 1 :
This sounds like when using confirmation requirement, there is NO Automatic Confirmation of TO. So, how is it confirmed? Manually via another tcode by the pioker? What is the purpose for not using Automatic confirmation?
When is Confirmation Requirement activated?
Part 2:
What is meant by "...the system automatically confirms the quantities when you create the transfer order".
When you create a TO, its not yet printed. So, does this statement imply that the TO is also printed and picking is already done ?
Part 3:
If not fully picked , will the system still automatically confirm the quantities as fully picked?
Is "confirm the quantities" = confirm that quantities have been fully picked or there is picking done either fully or partially?
Have a wonderful day...
Regards
JohnV_OBJ = SY-MANDT.
SELECT SINGLE RUECK RMZHL INTO (V_RUECK, V_RMZHL) FROM AFRU WHERE AUFNR EQ Order_No AND GRUND = 'WORK'.
CONCATENATE V_OBJ V_RUECK V_RMZHL INTO V_OBJ.
l_header-tdobject = 'AUFK'.
l_header-tdname = V_OBJ.
l_header-tdid = 'RMEL'.
l_header-tdspras = 'EN'.
if strlen( TEXT ) GT 40.
update AFRU set TXTSP ='E' WHERE AUFNR EQ Order_No.
endif.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = l_header
INSERT = 'X'
SAVEMODE_DIRECT = 'X'
TABLES
LINES = t_textlines.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
name = V_OBJ
savemode_direct = 'X'.
CLEAR : V_RUECK, V_RMZHL, V_OBJ , L_HEADER.
Here, t_textlines is a long text( set of lines in th elong text) -
Hi
My iPhone is blocked in that I can not either "buy" or "cancel" the purchase of my next song because there is no response when the "confirmation required" is tapped in.
Please help ...Hi ...
Tap Settings > General > Reset > Reset All Settings
Then restart the device.
Hold the power button until "slide to power off" appears. Slide to power off. After it is off, press the power button to turn it back on. -
Manual vs WM system and Confirmation Requirement
Hello ,
I would like to clarify the following regarding confirmation requirement.
Am I right to say, in a WM scenario,
1. Confirmation can be activated or not activated with a flag. In a non-WM situation, where user also manually enter the picked quantity, confirmation requirement is Not applicable.
2. Confirmation Requirement is an Verification process to check how many is actually picked. If fully picked, user goes into DO screen and enters the picked quantity in the 'picking quantity' field and no change to the delivery quantity which is the order quantity. Then where confirmation requirement is activated, a user will confirm the TO via LT12 and this leads to the wm activity status set to C automatically.
3. If not fully picked, actual picked quantity is entered in picking quantity and delivery quantity is set to this same value. The picking status will still be shown as C, fully picked because the TO is saved. During confirmation, user enters the difference using the indicator and now PGI can happen as wm status is set to C for partially picked quantity. User will process the balance in separate steps. The Difference Indicator is based on comparing the Ordered Quantity with the Delivered (or Picked Qty?)
4. In a non-wm situation, wm activity status is disabled or not applicable. Only picking status is applicable. Once fully picked, this quantity is entered same as the delivery and order quantity, the picking status is set automatically to C. Now, the Goods Issue can be processed.
regards
Pascal
Edited by: Pascal Gabin on Feb 5, 2011 2:37 PMbump * pls
-
Confirmation required won't leave screen
I made a purchase and it went thru and is working. But when I went into update aps on my itouch the screen come up CONFIRMATION REQUIRED
Do you still want to buy 100K credits fo .99?
Cancel Buy and its locked won't let me do anytingI have the same problem. I can do other things, but every time I come back to the app store it comes back to this screen.
-
BADI confirmation required.
Hello experts,
Can u please help me with the below requirement how i should proceed.
u2022Trigger a packing instruction IDoc from ECC to MII whenever the packing instructions are created/changed in ECC via t-code POP1/POP2.
As per my R&D, i found that BAdi- PL_PACK_INSTR_BADI will be implemented in POP1/POP2 t-code to trigger the packing instruction IDOC. This BAdi will be triggered after the packing instruction is created/changed in ECC.
I will trigger a idoc if the packing inst are created/changed in ECC to MII.
u2022Trigger a packing instructions IDoc from ECC to MII whenever a new or existing material with packing instructions are extended to an MII enabled plant in ECC via t-code MM01.
As per my R&D, i found that BAdi- BADI_MATERIAL_REF(not sure) will be implemented in MM01 t-code to trigger the packing instruction IDOC. This BAdi will be triggered when a material with the packing instruction is extended to MII enabled plant.
I will trigger a idoc if the packing inst are created/changed in ECC to MII.
Just want to confirm from experts, whether the BADI's found can be implemented or not for material with packing instructions.
Experts please provide your valuable suggestions
regards,
NTGS.
Edited by: ntgs_sap on Feb 21, 2012 9:08 AMHi experts,
Any update on above.
Regards,
NTGS -
EDI Order Confirmation requirements routine 002, fields COSTA & BESTK
Hi All,
Can someone help me understand what I can do to allow the Order Confirmation to be generated at the appropriate time?
The criteria seem simple enough:
order is complete
all materials are available
ignore the fact that the delivery may be delayed for a weekly consolidated shipment
Field COSTA: (both in VBUK and KOMKBV1) "Confirmation status for ALE"
Field BESTK: (both in VBUK and KOMKBV1) "Confirmation Status"
Does anyone have information on field COSTA? How it is triggered, etc? What configuration if any needs to be done to force it to become active?
I was assuming that when a sales order has a back-ordered product, the COSTA value would change. But this didn't happen in our system.
So . . . I copied and modified the output routine (002, include LV61B002), used BESTK instead of COSTA, but that didn't work either. BESTK is flagged AorB (not or partially confirmed) when the the delivery is held for a consolidated shipment on a later date -- even if the materials are available.
Any help would be appreciated.
Thanks,
EddieHi,
I think if you will post this message in ABAP Section then you will get answer quite fast, as this is not related to PI/XI.
Thanks,
Hetal -
Vendor Master and Bank Key Master-Confirmation required
Hi Gurus,
Is there any possibility in SAP, wherein we create Vendor master and Bank Key, but we can use that vendor or bank key only after confirmation/approval given by concerned person?
Please revert asap.
Thank YouHi
Check settings in
SPRO - Financial Accounting (New) - Accounts Receivable and Accounts Payable - Vendor Accounts - Master Data - Preparations for Creating Vendor Master Data - Define Sensitive Fields for Dual Control (Vendors)
Then confirm the same in FK08/FK09
Thank You, -
Confirmation required for Domino adaptor
Does the adapter work with the Lotus CA Process?
CA stands for certificate authority. This process controls access to the Notes certifiers, which are used for user registration (creates & moves)
I believe it does but can someone confirm this???XI rejects the raw message sent by Adobe with the following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_05_PM_Meas_Doc_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_05_PM_Meas_Doc_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>.
It would process the message successfully if I manually add the following tag to the XML file.
<ns0:MT_05_PM_Meas_Doc xmlns:ns0="http://alliance-pipeline.com/xi/HMI/I005_Meas_Doc">.
My question is how to make XI accept the message without manually manipulating the XML file. It looked like DynamicConfigurationBean could do the trick, but no success yet after several tries. -
Confirmation required about XI-XI communication
Hello experts,
I am successful in establishing XI to XI communication using XI adapter. Since with this, the message is posted directly into to pipeline of the 2nd XI instance, I wanted to make sure what all pipeline steps can be carried out there. My requirement is to do the structural mapping there in XI2.
Thanks,
Amol<i>I wanted to make sure what all pipeline steps can be carried out there. My requirement is to do the structural mapping there in XI2.</i>
>>>
Yes, you should be able to do the required in XI2. -
I want to download whatsapp and I pressed on it in the appstore and now it's frozen on the confirmation page, I can't press cancel nor can I press confirm. My phone is brand new!What to do please?!
hold the sleep/wake button and the home button until the phone restarts. after that make sure your itunes account is setup and confirmed.
-
RBA check - unique confirmation required
Hi all,
in an environment of CRM, Retail and APO I currently try to setup a rule based ATP check which should take the entire quantity from one of the existing plants. All what I achieve are multiple confirmations taking stock from different plants.
Assuming that there are 100 items in plant A and 200 items in palnt B available. An order requesting 150 items from plant A is put into the system. As response there are two new sub-items in the order taking 100 items from plant A and 50 items from plant B. This is unfortunately not a practicable result as it will cause shipment costs twice.
What I would llke to get is a single confirmation of 150 items provided by plant B. Does anybody know whether this is possible at all, and if yes, what needs to be done to get this.
TIA
MichaelHi Michael,
I think you can solve your request with a MISL scenario. MISL - Multi Item Single Delivery Location, was usually itended to deliver a group of items from one location, but think you can use it for one item as well. The system will check first if it can
deliver everything from one location and offers you a confirmation from one single location.
Setup a MISL scenario is not pretty easy, it has a lot of stumbling blocks...so test carefully the scenario and good luck.
One more hint: You need to activate the complete delivery flag in CRM to trigger the MISL fuctionality for a single item...
further information can be found in the SAP help:
http://help.sap.com/saphelp_scm50/helpdata/en/43/3903b63d1f1bcee10000000a1553f7/content.htm
best regards,
Michael -
Confirmation Required Please.
Please can someone confirm for me, does the iPod touch 32gb 3rd gen play music out loud without the use of earphones/docking station?
Many thanksYes.
-
Confirmation required about case structure in cursor
Hi,
I have been trying to use a case when structure inside a cursor in a stored procedure with regular expressions in it, but its throwing compilation error.
The error message does seem to be irrelevant.
Just want to know whether there is any limitation of using case when structure inside a stored procedure in a cursor.
If no limitation like that, then will try again to debug it.
-MDManas Datta wrote:
Hi,
I have been trying to use a case when structure inside a cursor in a stored procedure with regular expressions in it, but its throwing compilation error.
The error message does seem to be irrelevant. No it is not. The error message will tell you what oracle or the compiler thought what is wrong. Try to understand it.
Just want to know whether there is any limitation of using case when structure inside a stored procedure in a cursor.
If no limitation like that, then will try again to debug it.
-MDBe aware that the syntax of the case statement is slightly different beween SQL and PL/SQL.
Maybe you are looking for
-
Is there a for-each statement in XSQL like the one in XSL?
I'm trying to do the following: <?xml version="1.0" ?> - <!-- <?xml-stylesheet type="text/xsl" href="/dvd/xsl/admin/listuser.xsl"?> --> - <database> - <request> - <parameters> - <row> <checkboxuser>jonathan</checkboxuser> </row> - <row> <checkboxuser
-
I am inquiring as to if you can 2 different icloud accounts (that come from 2 different iphones with different apple ids) on the same computer. I would like both iphones to be able to back up to the same computer since we have different accounts/pict
-
Error in *.tmp file how to find the real source
-- FM 8, structured -- So ... cautiously (but enthusiastically) exploring the delights of DITA, I've taken an existing unstructured book and exploded the content into DITA topics in an XLM editor; even, made a ditamap to hold all the topics together
-
HT201269 I've just got a new phone and all my music from my old phone isn't working.
The list of available music is shorter, for a start, so I don't know where it's all gone. But even the songs that are there won't play. When I push play, it just skips past as if there's no file to read. And then the same for the next song and the ne
-
How to know whether a business package like 'PPS' is installed in a SRM sys
Dear experts, Could you please let me know how to check if a business package like 'PPS' is installed in a SRM system? Is it the correct way to check below way: SPRO -> SRM Server -> Activate Business Function. Thanks and regards, Ranjan