Confirmation status is changed
Hi Folks.I am working on SNC7.0.I created New PO and then iam confirming PO.While click on save button confirmed status will be CONFIRMED but after click on publish button confirmed status is changed to NOT CONFIRMED.These changes are in Po details screen.In that PO header General tab.
Any suggestions how to resolve this issue.
Thanks in advance.
Hi Srinivas,
In path:SPRO>Supply Network Collaboration>Basic settings>Validation>Own setting you will not get any values(even if you press F4 also).
There is no check here if you enter any junk value also system will save.
As i suggested earlier you need to maintain validation setting manually(do not press F4).
Save the validation setting as suggested and recheck now.
About validation check PO_CONF_RELEVANCE_CTRL :"Set Confirmation Status for Changed PO Item to "Not Confirmed"
If this validation check is active, SAP SNC sets the confirmation status of a purchase order (PO) item to Not Confirmed if the customer has changed the following item data in the customer back-end system and has sent the changed PO to SAP SNC:
■Goods recipient
■Ship-to location
■Product
■Requested delivery date
■Incoterm
■Price
Validation check PO_CONFIRMATION_DELETE:"Delete Confirmation Schedule Lines for Changed Purchase Order Items"
If this validation check is active, SAP SNC deletes the confirmations schedule lines of a purchase order item if the customer has performed a change that requires confirmation by the supplier. Changes that trigger deletion include the following: Quantity changes and the changes listed in the description for validation check PO_CONF_RELEVANCE_CTRL
Regards,
Nikhil
Similar Messages
-
Confirmation status on Sales order
Hi Gurus!
How can we change the "Confirmation" status on the Sales order (on Status Overview)?
Which actions allow to impact this status?
Thanks for your help.
Stéphane.Hi Stephen
The below link gives you all the Information that you were looking for like Incompleteness Procedure, Status Overview etc...
[Terms in SAP - COMPLETE (Status Overview,Incompleteness Procedure)|http://help.sap.com/saphelp_45b/helpdata/EN/93/744f93546011d1a7020000e829fd11/frameset.htm]
Regarding the Open Sales Orders as mentioned in your last Post with the Message from SAP Help Note follow the below link
[Open Sales Order Expalnation as per the Help SAP message in your last post|http://www.sap-img.com/sap-sd/explain-th-meaning-of-an-open-sales-order.htm]
Regards -
Difference in Confirmation Status
Hi Gurus,
Greetings.
I am encountering problems in delta report(/n/sapapo/ccr). I cannot reconcile the error nor sendig to APO does not
correct error 173. Difference in confirmation status o R3 against APO.
I checked the process order in r3 it is alreay delivered- with final confirmation against APO with release
status.
Kindly help if someone has already encountered th same problem.
Thanks
ArmiHi Armi,
We have encountered the same problem. In our system, the cause why it can't be reconciled via Delta REport is the changes made to the master data. The routing for the material is changed in our scenario.
The inconsistency can be rectified by putting the order in Status TECO.
Hopes this helps,
Raymond -
Status keeps changing from invisible to online: why the issue is ignored?
There is a serious issue raised in the parallel thread, which is critical for many people: "Status keeps changing from invisible to online" (initiated on 16-11-2014 by b.agne, Mac section). In short, when starting using a device, the Skype status changing from "invisible" to "online" - sometimes just for a moment, though enough for others to notice you. These affects very much any type of devices. I am sure the issue has already led to multiple personal crisises and potentially financial losses due to buseness partnership issues (I came close to that myself, and now use anything but Skype for business). The question is: WHY the issue is completely ignored by Skype, Microsoft and expert comunity? Please post the solution if anybody knows how to fix the issue, or suggest how to make Microsoft to know that it should be fixed. Kind regard...
Hi, I also have the same issue. I change the status to Invisible and a later on it is already as "Online", without having even touched/opened Skype. The only way that I see this may happen is that I have the app installed on the smartphone, but before it never had this issue, but from some month ago it started. Any correction or suggestion to work around this issue? Regards
-
Why status is change every time after execution of VI??
Hello,
I am not much familiar with Modbus communication,
I got one problem regarding to Modbus that when ever run my vi then after execution the status of DO3 is always changed and jump to the Alarm mode.
In attachment I have attached my screen shots you will get more clear Idea about my problem.
In LHS there is software window and before connection that software with instrument normally I set my DO3 at status mode but when I run my vi in order to check the supply voltage and after execution when I again connect that software then DO3 status always change and its come to Alarm mode.
Can you tell me that why its happen so??
and what kind of changes I have to do in order to avoid this problem....
Thank you very much.
Attachments:
DO3.png 386 KBok this problem is solve now that i have to make read holding register instead of write...
but still I am confuse about the mesurment of voltage generally i have to set like
1) when (Do3 and datalogger switch both are closed) wired is connected with DO3 and relay on data logger is closed then its shoud show me voltage less then 2V,
2)DO3 is open and datalogger is connected then voltage shoud be near to V+ (12v in my case)
3)both are open then output shoud be 0V
4)datalogger is open and DO3 is closed then voltage shoud be V+
and in above four case i have problem in 1st case only...other 3 are working OK
will you please guide me that is ther any change I have to do in data logger and what king of settign I have to to in order to get desired Output.
I am not much familier with Data logger,i have read datasheet regarding to this and i am using Agilent Data logger 34970A.
Thank you very much...
Attachments:
MeasureDO3.vi 33 KB -
Prevent update to document after status is changed
Hi all, I configured a new status profile for a sales document ITEM and want to stop user from editing the item once the status is changed to 'Close'. I have tried with Business Transaction 'Edit' (forbidden is set) and 'No Change Allowed' (allowed is set) but the system still allows me to update the sale item. These are the business transaction configured under Transaction Control. Can I find out what other areas I might have missed out?
Please note that with or without the configuration of the business transaction to block updates, the system will close off certain fields for update, e.g. Quantity field.
I know my last resort is to use the BADI but I understand that this is achievable via configuration but it somehow did not work for me. I read in other posts that people mentioned about 'Change document' but I cannot find this transaction in the list given in the configuration.
Lastly, just wondering whether the business transaction field for 'User Status Triggers Business Transaction' has any impact on what I am trying to achieve? I have assigned 'FINI' in this case.
Appreciate any advice on the above.
Cheers!
SFHi Christophe,
Re my statement "One thing I do not understand is why am I not seeing the business transaction for Change Document?" - I meant when trying to maintain the business transaction through the transaction control screen of the status. Example:
The transaction control screen:
When I click the New Entries button, I get this list to work on:
I scrolled through the list and could not find 'Change Document' (CHCG). Does that make sense?
I will have a closer look at the status analysis and see whether there is anything I can find.
Cheers
SF -
Confirmation status in Sales order header
Hi,
I have processed one sales order until billing. The processing status in Sales order is as below.
Overall Status: Completed
Confirmation Status: Not yet confirmed
Delivery Status: Fully delivered
I want to know why the Confirmation status is shown as "Not yet confirmed" when the Overall status is 'Completed'.
Please provide your inputs.
Rgds,
AmitDear,
I think after accounting of billing it will show the completed.
VA01-> VL01N (PGI)> Billing---> Accounting.
Regards,
Sandip -
Status Profile : Status not changing in CRM
Hi Gurus
Created order with header status as as " In process" , item status is defaulted to " open" and order replicatd to ECC , billed aswell . But when I checked in CRM still status not changing to completed but retains with In process at header level & open at item level.
I would expect order status should be completed at header level & Item level.
Is there any thing wrong with status profile settings at header & Item level? , I have created status profiles with following settings.
I have copied standard status profile " CRMORDER" and assigned to trasaction type and made following settings:
Under Open : following transactional contorl selected
To be distributed : Selected options "Forbidden " & No active
Under In process:
In process : Selected options " Allowed " & Set
Undo Rejection : Selected options " No infulence " & Set
Under Completed:
Complete : Selected options " Allow " & Set
Created status profile for Item i.e. copied standard CRMORD_i and made following changes:
Under Open : No transaction control selected
Under In Process :
Edit : Seleted options " No influence" & Set
Undo Rejection : Selected options " No Influence & Set
Under Completed:
Completed : Selected options " Allowed & Set"
Rejected : Selected options " Allowed & Set"
Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping Business activity reasons to order reasons in ECC.
Is any thing i am selecting wrong options in status profile at header level & item level? Much appricieated for solution.
Thanks
shashHi Gurus
Created order with header status as as " In process" , item status is defaulted to " open" and order replicatd to ECC , billed aswell . But when I checked in CRM still status not changing to completed but retains with In process at header level & open at item level.
I would expect order status should be completed at header level & Item level.
Is there any thing wrong with status profile settings at header & Item level? , I have created status profiles with following settings.
I have copied standard status profile " CRMORDER" and assigned to trasaction type and made following settings:
Under Open : following transactional contorl selected
To be distributed : Selected options "Forbidden " & No active
Under In process:
In process : Selected options " Allowed " & Set
Undo Rejection : Selected options " No infulence " & Set
Under Completed:
Complete : Selected options " Allow " & Set
Created status profile for Item i.e. copied standard CRMORD_i and made following changes:
Under Open : No transaction control selected
Under In Process :
Edit : Seleted options " No influence" & Set
Undo Rejection : Selected options " No Influence & Set
Under Completed:
Completed : Selected options " Allowed & Set"
Rejected : Selected options " Allowed & Set"
Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping Business activity reasons to order reasons in ECC.
Not sure whether i am selecting wrong options in status profile at header level & item level?
Plz help me on this.
Thanks
shash -
Agreement Status to change from C to B
Hi ,
I have a scenario where rebate agreement has a Validity period is 01.01.2009 to 31.12.2009 .
In contorl Data :Agreement status is c (Settlement has been created)
I want to know how it can be changed to status B(Agreement released for settlement).
I have tried using Tcode:VBOF.I did not find any document.
Thanks
RKMACCHello RKMACC,
Creation of the Credit Memo Request will set the status to "C".
If this Credit Memo Request is deleted, the status should change back to "B".
In case the Credit Memo Request gets billed(i.,e., Credit Memo is created), then the status will change to "D".
Regards,
Raghavendra -
In which cases result cache status is changed to bypass?
In which cases result cache status is changed to bypass? Because I tried but it wans't changed?
Hi,
http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/d_result_cache.htm
https://docs.google.com/viewer?a=v&q=cache:k4wT-iwL31MJ:www.sfoug.org/Downloads/Oracle11g_Results_Cache_20100304.pdf+oracle11g+result+cache+status+is+changed&hl=en&gl=in&pid=bl&srcid=ADGEEShUeeW6XPH7QiCtgUVzykmgGKA6l9NX5IZ322f-QIWU5D3qy-18KD7ffddW7t51PYL_xoJORhZLWg7K53SIrLfJd7R8jrcuPWoPgH3SwxOI6jFXeEYg7rhY1NTqriiakg_3qDgn&sig=AHIEtbQBpfc562bezPUIyojHZZ7kuxzI9Q
http://www.dba-oracle.com/oracle11g/oracle_11g_result_cache_sql_hint.htm
Regards
Hitgon
Edited by: hitgon on Apr 28, 2012 6:43 PM -
Preference status not changed for the processed products
Hello All,
While Aggregating the vendor declaration, I am getting the message as below
Preference status not changed for the processed products
Could you please help me to resolve this issue.
Thanks & Regards
RahulHello Rahul,
aggregation is not changing status on LTVD. (Possibly LTVD has been already agregated). Newly maintained LTVD is not changing status of the product, its remaining negative whatsoever.
Kr,
Gabriel. -
After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6.7. and now appears to be missing from the computer and my administrator status has changed to standard. Update Software says I need to do update to 10.6.7 which I can't do because administrator privileges are gone. I didn't back-up with Time Machine ,BAD, but I have all files backed-up on another hard drive. Should I just reformat and start over? Any ideas or help would be appreciated.
PROBLEM SOLVED! For me at least!
Apple Support gave me the clue - I had run Migration Assistant, and it had obligingly replaced a system file (/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager) with the equivalent from my old system.
I reinstalled 10.6.7 using the DVD supplied and all is well.
The moral is - don't use Migration Assistant.
Along the way Apple Support provided me with a link to download Combo update 10.6.7: this could not be installed on my iMac.
Hope this helps. -
CProjects- Customizing New Status in "Change Status"
I need to customize new status in "Change Status" drop down of cProjects tool. Now the status available are "Created, Released, Locked etc" as we all know. But i need to customize my own status for "Projects Phases and Tasks" I create. Can i do that. Please help me on the same. It is urgent.
Edited by: Visvesh Ramanathan on Jan 10, 2008 4:00 PMHi
As Vivek already explained, you can have user status in bs02
now here you can maintain the status as one maintains in R/3 or ECC
create an auth Key in BS52 for status which needs approval
maintain the same auth key in bs02 against status
what you have to do is create a role using pfcg and assign that key in that role
assign the role to user which ll approve the status to next status.
Select object type which will give you the applicability of status profile.
e.g the status profile is to be used for project / task / checklist etc etc...
The user statusses are visible once you select the status in 3rd tab of project
Niranjan
Award points if useful -
Production order status as "Change by external system"
Hi,
I am come across the production order status as "Change by external system"
In what condition above status is maintain in production order.
Please help me.
SanjayAny change in the order done in the external system other than SAP, this status is set by the System.
For example XMII.
Regards
Ratan -
User Exit in VA02 for Warranty Status field change
Hi Gurus,
Can any one pls suggest the user exit that gets trigerred when there is a Warranty Status Field change in the Repair Order of Order type ZRAS and when the change occurs it has to update the work center of the Corresponding Service Order.
Pls help me with this issue.
Regards,
VIJAYB.Transaction Code - VA02 Change Sales Order
Enhancement/ Business Add-in Description
Enhancement
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
V46H0001 SD Customer functions for resource-related billing
V45W0001 SD Service Management: Forward Contract Data to Item
V45S0004 Effectivity type in sales order
V45S0003 MRP-relevance for incomplete configuration
V45S0001 Update sales document from configuration
V45P0001 SD customer function for cross-company code sales
V45L0001 SD component supplier processing (customer enhancements)
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45E0001 Update the purchase order from the sales order
V45A0004 Copy packing proposal
V45A0003 Collector for customer function modulpool MV45A
V45A0002 Predefine sold-to party in sales document
V45A0001 Determine alternative materials for product selection
SDTRM001 Reschedule schedule lines without a new ATP check
Business Add-in
BADI_SD_SCH_GETWAGFZ Scheduling Agreement: Read WAGFZ from S073
BADI_SD_V46H0001 SD Customer functions for resource-related billing
No.of Exits: 15
No.of BADis: 2
Maybe you are looking for
-
Image preview (thumbnail) help request
I'm a recent convert from PC to the new imac *LOVE IT!* However, I'm very accustomed to the beautiful little option in windows to preview thumbnails of image files within their folders, WITHOUT opening them in a program to view them... this does not
-
Screen freezes when shutting down with sound running
I have Windows 2000 with GF4 and Audigy2 ZS. I installed the latest WinDVR and tuner drivers and watever from the web. The card works fine, like I can watch TV and stuff, but when I try to close the program, the screen freezes and the sound keeps o
-
LIST OF ALL CONSUMPTION AND STOCK GL ACCOUNTS
Dear experts, Can you please tell me what is the tcode for checking all consumption n stock related GL accounts. Thanks & Regards Sreelatha.
-
How do you tell the browser what to load first?
I need an accordion spry to be one of the very first things that load, because typically, it'll remain completely open extending the page. Any ideas on how to tell the browser to load the accordion spry first, or at least load it closed instead of co
-
Just bought Star Trek Into Darkness & won't play on my 1st gen Apple TV
I just bought and downloaded Star Trek Into Darkness. Now it won't sync to my 1st generation Apple TV. I went into my Apple TV settings in iTunes and chose Into Darkness to sync. I then click Apply and Sync, but it doesn't sync. It doesn't give m