Confirmation TO IDOC WMTCID03

Hi ,
This IDOC is used for confirmation that comes from external syste. SAP confirms the TO in the background. SAP confirms that based on the function module.. my question is what are minimum fields that SAP should have inorder to confirm the Transfer Order?
can it only confirm if it received TO number and Item number from external system ? if yes how we can test it ?
Thanks
Rahul

Dear Manish,
I do think that my post adds value since I had the same issue. I wanted to test inbound IDOC WMTOCO but kept running into an error (Idoc was posted successfully, but the confirmation did not take place).
After spending some time searching for this issue on the net, I debugged the standard code and found that the confirmation did not take place because the TO wasn't sent to an external system.
This is the question that was asked in the main topic "can it only confirm if it received TO number and Item number from external system? If yes, how can we test it", but wasn't answered by Gopinatha Rao Ganesh Kumar.
I hope that with my message I will help other people who have this issue and will search on SCN (just like I did, but didn't found any answer). If they have further questions, they can always reply the message.
Thank you,
Rens

Similar Messages

How to get confirm whether idoc reached receiver or not?

hi pals,
I want to know how to confirm whether idoc is reached the receiver system or not?
how to find the idoc no in case of idoc failure in sxmb_moni or any tcode for that?
i am looking in terms of sap production systems
thanks
Ruban

ruban,
It is impossible to know the IDoc number in XI system as in this case IDoc is posted in the target system. Here, IDoc gets posted into target SAP system, and while generation of IDoc in target, at runtime IDoc is generated.
To find in XI whether the IDoc has been received or not, you can configure BPM where in a SEND step is configured in the block for which exception branch is defined. And in the exception branch you set 'ThrowAlert' to send an email to recipients.
After triggering the message go to SXI_MONITOR where in you can see its process engine to see whether exception branch is routed. Then you can understand that IDoc did not go to target and otherwise it has gone.
Regards,
Suraj Kumar

Reversal of Production Order Confirmation through IDOCS

Hello all,
The time for each operation in a production order is logged in KabaBEnzing tool called Autotime. This is sent to SAP through IDOCS and the order confirmation is created. There is a scenario where the supervisor could have entered the wrong time against an operation. Is it possible to reverse the confirmation through IDOCs. If yes, please let me know what should be the approach? Also, I heard that SAP does not accept negative time to do the reversal. How true is this?
All helpful answers will be rewarded.
Thanks,
Kalyan

Hello,
I saw your message and we are doing the same thing. Did you find any answers to your questions. We are using Kaba for our shop system and now we would like to sent negative numbers back to sap because of supervisor adjustments. I have not found any way to set Sap to allow it. What conclusions have you came up with the situation.
Thanks again,
Jeff

Production order confirmation thru IDoc , IDoc has been processed twice

Hi Experts,
Good day.
I have a problem with my Production orders confirmation using IDoc automatic processing.
I have an IDoc that has successfully confirmed a Production order, the Idoc has a status of 53.
However, after a month, the Idoc has been used again on a different Production order confirmation, and the IDoc resulted again to status 53.
Could you kindly confirm if this a SAP standard behavior or an error? If this is an error, is there any available SAP notes that I can use.
Here is the spec of our system:
ECC 5.00 - SP SAPKH50015
Please kindly provide us your idea on this.
Thank you very much.
Kind regards,
Rosalinda Ines Aben
PP Support

Hi Rosalinda, i have the same problem. You found some solution ?
Thanks a lot !!!.
Federico Cicerchia

Order Confirmation - Generate IDoc even if the order is credit block - How?

Hi EDI Experts,
I have a simple requirement. I have no requirement set up in the output determination procedure for Order Confirmation. At this scenario, i am getting outbound 855 IDoc for all the orders except, the orders with Credit block on it.
The client wants to send out the order even if it is credit blocked. Is there a way that i can do this?? Any suggestions ??? Your views are most welcome.
Thanks and Waiting for youy replies,
Creasy Matt

Hi,
I'm not sure, whether it is apt to ur requirement.
We can remove the Credit block by configuring the 'Sales Order Types'.
from the Tcode: VOV8,
Select ur order type (OR), click on the details icon
there u can find the 'Delivery block' at the Shipping tab.
thanks\
Mahesh

Trying to create a Sales Order Confirmation through IDoc

Hi,
I am trying to create Sales Order Confirmation through ALE with message control.
My recieving system is XI server.
Can u please send me the steps to what to be done to trigger IDoc automatically.
The condition types and access sequence created is for Output type customer but i am sending it to XI Server.
please help me.
Thank you in advance,
Gangolu.

Hi Gangolu,
Have a look at url. Hope this provides some inputs.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
Thanks
Lakshman

Picking confirmation using IDOC

Hi,
I have to create pick confirmation from WMS to SAP. I'm uing SHPCON message type and DELVRY03 basic type and idoc_input_delvry FM from my development. very this is fine i have got all fields reqired in basic type the problem is
1. IF WMS don;t send any pick quantity for line item or if it sends '0' quantity the line item has to be deleted from the Delivery.
2. If in case pick qty is more than the delivery qty it should generate an error.
3.Thre is a concept called Batch split in Outbound delivery. What it the functionality of the batch split.
Can any one come accross these kind of scenario plz help me.
Thanks & Regards,
Naren.

i think u r going to generate the 51 status for the conditions in ur idoc
for 1 and 2 .
Pick quantity is not maintained for the table . The reference for this is the Delivered Quantity.
Goto delivery (vl02n) and enter a delivery now see the delivery qty for a particular item .
say 16 for Del qty now keep pick qty as 0.
and save .
now see the over all pick status . this will be 'A'.
repeat the same process and now keep pick qty as 4 .
and save .
now see the over all pick status . this will be 'B'.
this becomes 'C' means completely picked if the pick qty is eq 16 in this scenario.
i cannot pick 17 as this is out of scope error will be triggered.
<b>Pickup the segment which is populating the pick qty and keep the options above u
and compare it with delivered qty.</b>
for 3 ..
refer this..
Let me put it this way.
The process is suppose a sales order is there
and that is scheduled
16 on dec 29
24 on dec 30
if i create a delivery as of today ie dec 29
then the pick qty is 16
and i create a delivery on dec 30 ie tommow
then the pick qty is 24.
total quantity for that item is 40 (break
16+24).
For this break up u need to look into Vbep
Entries .
This is the process of scheduling where in two
deliveries are created for one sales order .(as
example).
regards,
vijay.

Enhancement for picking confirmation inbound idoc

Hi Friends,
I'm using Message type SHPCON , Basic Type Delvry03 and process code DELV for picking confirmation. where as i have to extend the basic type for a field LIPS-UECHA ( Batch split Indicator) which is not avilable in basic type. which userexit or badi i have to use to plopoualte this filed data in to SAP? Can any one help.
Thanks&Regards,
Naren.

Hi,
You exttend the basic IDOC type DELVRY03. To which Segment you want to add this under E1EDL24 or E1EDL37. Change the process code inorder to fetch the data from the application.
WE31 to add the field to the segments and create a new segment
WE30 extend the basic type and add the newly created segment
WE82 to add the extended basic type to Message type.
change the process code.
Regards
Kannaiah

Production order confirm thru IDOC

Hello Guru,
we are having problem to our confirm Production order it has COGI error BA deficit on a same material with same batch.
our production order A, B, C, and D are process thru transaction code LM00. afterw that we check the process order thru WE02 and it already has status 64 thats why we do BD20 to Order A,B,C and D (all process in same time) to make it status 53. the problem seems occur after doing BD20 all of this order pick one batch 11111 for component material 123. this cause us 4 COGI error after BA deficit since batch 11111 had no enough stocks to make the requirement of material 123 for the order A, B, C and D.
How was this happen? and how could we fixed this?
Please provide helps
Thanks
Ryan

Hi Rosalinda, i have the same problem. You found some solution ?
Thanks a lot !!!.
Federico Cicerchia

Confirm Inbound IDOC FM

Hi,
Please confirm whether this FM can be used to post the inbound cycle count.
L_IDOC_INPUT_WMINVE
Let me know whether it relates to li11n transaction.
Regards,
B.Anandh

Yes to both.

Need Confirmation in IDOC creation

I activated the standard message type MATMAS and setup the receiving system etc. After creating material and chaning the existing one, I go to BD10 and run the program. I am getting message as
1 master idoc created... and after some time I get
1 communication idoc created....
I want to make sure these 2 messages are right and both the idocs will be created every time. Is there any option as to create only communication or master one?

Hi,
yes both master and communication idoc is created but you will only see communication idoc in the system...
let me know what is your issue.
Regards,
Nagaraj

User Exit for IDOC

Hi,
For any outbound idoc, if the parameters of export/import contain EDIDC and EDIDD along with the table.
It is possible to extend the idoc and populate values?
As i don't have authroizations, i need to confirm whether an wmtcid03 idoc can be extended and values can be populated.
I found the user exit also.

Check the Function Group <b>XLID</b>,you could find few where you can track EDIDC and EDIDD and do furter manipulation as needed.
~thomas.

Posting sales order idoc from VA02

Hi all
I need to permit to user to launch the a confirm message idoc directly the VA02/VA03 using the output like for normal sales order print, but SAP don't show the EDI messages in that functionality. Exist a possibility to permit the launch EDI output messages type by the VA02 without use the WE15?
thanks
Davide

Hi Wolfgang
Unluckily the message type 6 (EDI) are blocked to appear in the output manual dynpro (that where the user can make the preview of message).
I forced that in the standard:
RV_MESSAGE_DIALOG
    DELETE gt_xnast WHERE nacha NE postversand
                    and   nacha NE telefax
                    and   nacha NE MAIL_EXTERN
*{   INSERT                                               1
                    and nacha NE EDI   "per questo messaggio stampo da interfaccia
*}   INSERT
                    OR    aktiv NE space
                    OR    updat EQ const_d
                    OR    updat EQ const_l.   " explicit deleted by user
and for block the preview of this mesage type:
LVMSGI01
Functioncode for PREVIEW
    WHEN 'VIEW'.
    Check if an entry is marked
      CHECK count <> 0.
*{   INSERT                                              1
      check nast-nacha <> '6'.   "niente preview per gli edi
*}   INSERT
Davide

PO Confirmation unit

Dear Gurus,
I would like to know if it is possible for a vendor to confirm via idoc (ORDERSP) in a unit that is different from the one defined in the PO.
Ex : Purchase order unit : 1 PAL (1 PAL <-> 1000 PC)
Vendor confirmation unit : 1000 PC
I have made some tests but I did not succeed. Do I need a specific development to manage this functional requirement?
Thanks in advance.
Regards,
Lionel

You will have to take help of your technical consultant and map units of vendor to your respective units.
in PO confirmations should in PO units only, else you should create units as per vendor in your system and use those units in PO creation.
If you maintain a simple mapping table of which vendor unit corresponds to which of your unit of measure, I guess your purpose will be solved.
Regards,
Dakshesh

Change Pointer Program for IDOC creation..??

To All
Where does the message type is assigned, which allow that type of IDOC getting created in WPMU...??
Can COND_A be created in Change pointer Program...??
If possible ..How...??
Thanks
Sumeet

3)
RBDMOIND to confirm whether idocs have been successfully
dispatched to the receiver..and v can also use this program to change the status of idoc from 3 to 12....
RSNATED is the program used for triggering IDOC for the output type..where the output medium is 6.
And the subroutine that triggers the IDOC in the program is EDI_PROCESSING.
RSNASTED itself determines the associated IDoc outbound function module, executes it to fill the EDIDx tables and passes the prepared IDoc to the port.
You can call the standard processing routines from any ABAP, by executing the following call to the routine. You only have to make sure that the structure NAST is declared with the tables statement in the calling routine and that you fill the at least the key part and the routing information before.
TABLES NAST.
NAST-MANDT = SY-MANDT.
NAST-KSCHL = 'ZEDIK'.
NAST-KAPPL = 'V1'.
NAST-OBJKY = '0012345678'.
NAST-PARNR = 'D012345678'.
PERFORM einzelnachricht_screen(RSNAST00).
Calling einzelnachricht_screen determines how the message is processed. If you want to force the IDoc-processing you can call it directly:
TNAPR-PROGN = ''.
TNAPR-ROUTN = 'ENTRY'.
PERFORM edi_processing(RSNASTED).
~~Guduri

Confirmation TO IDOC WMTCID03

Similar Messages

Maybe you are looking for