Confirmed qty always shows 0

Hi :
I encountered very strange case,in item level of sales order, then I went to schedule line tab and saw confirmed qty showed grey and zero, but in md04 and mmbe the available qty is 10,then I went back to header level to click on ATP check, it only shows one button "continue", and at bottom, I saw "Dely proposal:not possible" which means I am unable to confirm ,please help.

Hi,
Go to
IMG >> SD >> Basic function >> Availability check and TOR >> Availability check >> Availability check with ATP logic >> Define default settings >> Maintain E in front of your sales area
Then in sales order u will able to see all tabs
One time delivery
complete delivery
delivery proposal
ATP qty.
scope of check
other plant
Kapil

Similar Messages

  • Confirmed Qty still shows ZERO after complete delivery

    Hi
    A particular item in a sales order has been completely delivered and billed, but in the schedule lines tab, the confirmed qty and delivered qty are still showing as Zero. Also there is a tick mark for the "Schedule Lines Exist" column for that item which implies that the confirmed quantity of the item is smaller than the order quantity.
    Checked the forum but couldnt find anything related to this scenario.
    What needs to be done?
    Thanks & Regards
    Madhu

    HI,
    Please check for respective Material at Sales: General/Plant tab what is the availability option selected if it is anything other than KP(No check), then system confirms the quantity as soon as the sales order is saved.
    Even though the Delivery has been Deleted, in your case if Quantity is confirmed against that Sales order that Quantity will be available for other SalesOrder and their corresponding Deliveries.
    U can test this my reducing the Quantity of that Line item from that sales order. You will find that Quantity reduced from old sales order will be available for new Sales Order.
    Hope this will solve your Query.
    With Best Regards,
    RB

  • MTO Material not confirming Qty available as cust stock -Is co06 Compulsory

    Dear Gurus,
    I created a sales order for a material which is on strategy group 50. There was no stock available while creating the sale order so No Qty confirmation could take place during Availability check.
    MRP was run, and after confirming the process order Cus. Stock was available. As the material strategy group was 50 the stock was also reserved against the sale order.
    but when I go Sale order procurement tab Confirmed qty is showing zero, When I do material availability check Qty available to confirm is also showing zero. what I dont understand is even though Cust Stck is reserved against the sale order why am I not able to confirm the qty.
    In the procurement tab If i change Schedule Line category from cp(default: MRP) to cn(No Planning), then automatically the qty is getting confirmed.
    What am I doing wrong, Do I have to do compulsorily do back order processing (co06) to assing stock to an order?
    please help.
    Regards
    Sri.

    Hi,
    Please check if the stock is reserved against the customer. Secondly check your schedule line and Item category configurations.
    Regards,

  • Confirmed qty zero in sales order for Credit management

    Hi SD Experts
    Created an order in VA01 for 10 qty which exceeds the credit limits. In item level schedule lines it is showing the confirmed qty 10 instead of 0 qty before saving the order. After saving the order I have checked in VA02 it is showing Confirmed Qty Zero in Schedule Line.
    Is it because of the Availability check it is showing the confirmed qty in SO for 10?
    Is there any possibility the confirmed qty should show zero in VA01 before the order is saved ?
    Regards
    Pradeep
    Edited by: Pradeep Kumar.A on Nov 5, 2011 6:17 AM

    Confirmed quantity is a result of configured ATP rules and availability of the inventory. System has control over it and it is not changeable. Imagine a situation where system says that the confirmed quantity is 10 cases based on the inventory availbility and you go out there and change to 100... does it make sense to be able to change it like that?
    So, no you cannot change it. You can only influence it by changing your order quantity or adding inventory or move some reserved quantities to unreserved status etc.

  • Confirmed qty is always zero..

    Hi all,
    I am testing the Consignment Process in SD.
    I have done the below settings in IMG.  But when I create the Consign Fillup Order, always the "Availability Control Screen" pops with the Confirmed qty showing always ZERO....even though the plant has sufficient stock.
    When I create Normal Sales Order, I don't get this message. Is't becos in Schedule Line cate CP the Av check is not ticked in t-code : VOV6 for movement type 601 ???
    1. Consignment fill up:
    Sales document type is KB
    Item category KBN
    shedule line category E1
    In this step, since we are not invoicing the customer. document flow is sales order -
    delivery item category. It will not be relevent for billing and pricing because we are not charging money for these goods in this step.
    In schedule line category, we will set movement type 631 & set for availability check and TOR.
    2. Consignment Issue.
    Once the customer informed us that he used all the goods or partial goods then we will create consignment issue for used goods.
    Sales document: KE
    Item category: KEN
    shedule line category: C0 or C1
    Here we are invoicing the customer(because he used the goods). We assign the delivery documnt and billing document to the sales document.
    In item category, we are setting relevent for billing, pricing, special stock.
    In schedule line category, the setting is 633 movement type, relevent for availability check & TOR.
    3. Consignment Return: Customer found that some goods are damaged or he not able to sold the goods he want to send it back. that we are creating this document.
    Sales document type: KR
    Item category: KRN
    Shedule line category: D0
    Then I assigned delivery document and billing to sales document. We create return order, return delivery, return billing.
    The setting for item category is relevent for billing, returns, pricing, special stock.
    The setting for schedule line item category: 634 movement type, NO availability NO TOR.
    4. Consignment Pick up:
    Even if we create the consignment return the goods are not coming directly  to our plant. For that we need to create consignment pick up. here the owner ship is not changing so we do not need to create billing.
    Assign retrun delivery to sales document type.
    Sales document: KA
    Item category: KAN
    schedule line category: F0 & F1
    The item category is relevent for returns. any shedule line category relevent for 632 movement type, MRP, availability check, delivery.
    Regards,
    Pri

    Dear Anne
    My suggestion would be create the issue order with reference to proforma (F8).  Then only, you have the track record of whatever material despatches from plant tallies with material available in issue order.
    If you create  issue order with reference to fill up order, at a later stage, you will not be able to track despatch details accurately.
    To explain your requirement in detail, my comments would be as follows:-
    You created Consignment fillup order for x1 material 10 pcs.  For this you create fillup delivery and proforma invoice.  Based on this proforma invoice, you create an issue order so that whatever you transfer the stock to warehouse, for that quantity only, you issue order will show the details.
    Against this issue order, you create a issue delivery for 10 pcs and generate commercial invoice (F2) for the same.  Now as you said, if end customer rejects 2 pcs out of 10 pcs, you create a return order with reference to commercial invoice.  It should NOT be with reference to issue order.
    I am sure, now your flow will be in line with the standard process.
    Thanks
    G. Lakshmipathi
    ps:-  think you took most of my today's time ::).  no problem in turn, I am also checking my capability in this process.  reward if this really useful

  • Itu2019s showing confirmed qty more that order qty in sales order

    Dear Guru's
    I am working on production server issue; the issue is delivery has been created more that sales order qty.  When I am seeing sales Oder schedule lines itu2019s showing confirmed qty more that order qty in sales order what could be the reason can any help me on this.
    Regards
    DNR

    Hi DNR,
    first up, appreciate if you can use your real name instead of DNR , I'd love to see your actual name.
    Coming to the question, a deliery can be created more than the ordered quantity. And if you pick whats delivered - that can show as confirmed too..
    Standard SAP just throws a warning indicating this over delivery. And incase you want to prevent this happening - you can trigger an user exit to change this warning to error.
    Config is also possbile if you have setup your cust mat info record or sales order to check over delivery and set the item cateogry for delivery. You can go to t.code 0VLP( Zero VLP) select Over Delivery -  'B' for delivery item category.
    Regards
    Sadhu Kishore

  • GR qty showing less than production order confirmation qty

    Hello Experts,
    Greetings.
    My issue is while doing production order confirmation(CO12),for some materials it shows less GR quantity than the confirmation qty.I m wondering how it can be possible?
    What could be the problem?
    Plz advice.
    Thanks
    Nitin

    Confirmed qty of each operation and delivery qty at the header are two different fields.   Confirmed qty will be the same with the yield to conf. during confirmation.  Whereas, the GR qty is equal to the total sum of quantity received from the order. 
    Check whether during confirmation you create auto GR or not.  If yes, then check the COGI t-code.  There might be some error log of goods receipt in there.  If no, then check GR qty in document goods movement compared to confirmed qty during confirmation.
    Hope it helps.

  • Order qty and confirmed qty mismatch

    Dear friends,
    My requirement is System should not allow to go further if the sale order qty and confirmed qty(after avaialbility check) mismatch is there.Pls suggest.
    Now currently system will check the availability qty and will show the information of confirmed qty in the another screen.and if we say continue the process, we can go ahead and save the document.but the document will be in open state.
    So pls suggest the way i can go ahead for this requirement.
    Regards
    Mahendar.

    hi,
    If u want to allow user to create SO as much as available qty..? means  system sud create SO for order qty is equal to availble qty ...? if yes
    then go the availbality check  and find out availability check and checking rule..
    and again go to OVZ9 remove the check box check with out RLT from rep.lead time tab
    Resul is: If u enter in SO a10 qty ,and if you have only 5 qty in hand or in plant ,then system after checking the items it will change the order qty in SO(i e 5) automatically,
    Caprin

  • Order quantity is always showing zero in ECC  --- Urgent

    Hi Team,
    Service order created in CRM Web UI and with service material (Servicing charges) order quantity as u201C1 " at the SM item level defined.
    Order is getting saved without any errors and replicated well with the amount to the ECC ,  but the Issue is order quantity is always showing as " 0 " in ECC , instead of  u201C 1 u201C
    SAP Tem had proposed to change the SD Document category type From u201CCu201D ( Order ) to "L" (Debit memo req ) . We had changed the same and tested, but no use, still we see no change in the order quantity of the service material in the ECC.
    If any one knows, how to address this, pls respond at the earliest.
    Regards
    VCS

    Dear Brhmakumar,
    There is no option to enter Operation qty. in routing.
    And for the converstion factor from header qty to operation qty. is 1:1 is in routing.
    Thanks & Regards,
    Mihir mehta

  • Customer Order Qty not showing in MD04

    Dear Sir,
    Customer has booked an order for 5000 Nos of one FG. The Order is very much active. But when we see in MD04, Requirement Qty is showing (-)5000 but there is no qty coming in available qty column. Practically it should be (-)5000, as plant stock is zero. Due to this error, planned order is not coming on planning run.
    I believe some thing missing in material master. As other material booked against same sales order is coming in MD04.
    Can anybody help me. Full points for helping answers.
    GR

    Hi,
    I think you should do what was told you by Ganesh. If planning strategy is e.g. 10, 11 the SO has only informative role, no PldOrd will be generated for it - this is MTS environment.
    If planning strategy is 40 you may have PldOrd for SO based on IndReq qty&date.
    In MTO environment you should 'always' get PldOrd for SO.
    BR
    Csaba
    Edited by: Csaba Szommer on Jul 23, 2008 2:21 PM

  • Balance order confirmed qty in PI sheet

    Dear experts,
    Pls suggest while performing confirmation in PI sheet system shows the confirmed qty in the field not the balance confirmed qty that system useually shows while performing good mvt using co11n or cor6.
    Thanks in advance for your inputs and help...
    Regards,
    Nitish

    Hi
    If you are clear on backward and forward scheduling this doubt may not have come
    Check this thread and all the replies carries a lot of meaning
    Forum post in ERP - Sales and Distribution (SD) General: Back scheduling
    Back scheduling
    Hope this clarifies all your queries and issues
    Regards
    Raja

  • GR for Confirmed qty only

    Hi Group,
    MY requirement is:-
    An Order qty is 100 ton and in shift A i have confirmed 1 ton , when i do MIGO (goods receipts) for that order system proposes order qty 100 , but my requirement is that system should show the confirmed qty 1 ton ,
    I know that this not avaiable is the standard SAP ,
    If any enhancement or program is available please forward.
    Thanks in Advance

    Dear,
    Enhancement : MBCF0002
    Function module: EXIT_SAPMM07M_001
    Please refer this link for details,
    [Confirmation = GR|default quantity of confirmation(co11) should allowed in goods movements mb;
    Regards,
    R.Brahmankar

  • MCRM - Planned & Confirmed qty in Reporting point

    Hai PP Gurus,
                     In MCRM T-code , sytem shows only confirmed qty in each reporting points. Where i have to find the confirmed qty versus Planned qty or Operation qty
    based on planned order or materialwise.In MCRM itself  I selected operation qty key figure but system shows only 0 for that column. So pls throw some light on this.
                     Anyother T-Code available for this type of requiremnt?
    Thanks & Regards,
    S.Ganeshraja

    Hi Ganesh,
    i donot think standard report is avilable to meet your requirement, my suggestion is create customized report .
    if u do backflush at last reporting point (3rd RP in yourcase), the planned order qty will be reduced which is equal to confirmation qty(65 in ur case, Now the planned order qty reduced to 85 Nos )
    1.u can see the confirmed qty for each reporting point in table S028
    2.Blanace quantities to be confirmed for planned order in table PLAF
    i hope ur creating one planned order per day  for each material.
    regards
    pradeep

  • The "Always show tab bar" setting keeps unchecking itself.

    I'm using Firefox 4 on multiple machines all running windows 7 and synchronized with built in Sync and one instance on Android. I've noticed sometimes when closing all but the last tab that no tabs show in the tab bar (which is on top, I like that!). I go into "options" - "tabs" and see that "always show tab bar" is unchecked. I check it and get back to daily routines, only few days later the same thing happens again. By the way, I've noticed the same on my girlfriend's computer, also running windows 7, but not synchronized to any other computers. It's not a disaster, just annoying when it happens- as if someone sneaked in and changed my settings. Please help. Thanks.

    First check to make sure that an add-on is not interfering with behavior, to do that follow the procedure in the [[troubleshooting extensions and themes]] article.
    If it is not caused by an add-on, as a test you can create a new profile. Firefox stores user data and in profiles, creating a new profile will confirm if there is a problem with your current profile. See [http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows Creating a new Firefox profile on Windows]. If the new profile works, you can [http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox transfer data and settings to the new profile]. It is best not to copy he preferences file (prefs.js) to the new profile as a setting stored in it may be causing the problem.

  • Transfer Confirmed Qty to ATP Qty

    Hi all,
    i am using scheduling agreement where in i had 1250 qty stocj in FG stores.
    I had a delivery schedule for 21.05.2007 for 1000 qty, so at schedule line i had confirmed qty 1000. Now the ATP qty is 250 nos. I got a fresh requirement for dispatch of 1000 qty for 09.05.2007. As my ATP qty is 250 the system will take only 250 nos. So i have deleted the schedule on 21.05.2007 for 1000 qty.
    Now, when i go to CO06 (BACK ORDER) 1000 qty is showing confirmed for 21.05.2007. So even if i increase my delivery schedule qty to 1000 nos on 09.05.2007 system is excluding the confirmed qty and taking the ATP qty.
    HOw to transfer the confirmed qty for 21.05.2007 to ATP stock.
    Pls give ur precious suggestion as this is very critical for me.
    Regards
    Kishan

    I suppose Kishan is talking of Sales Scheduling agg.
    I think in CO09, you double click on the order no. for 21.05 and in the bottom screen, make the committed qty. as zero (earlier 1000).
    Now the requirement is clear and you can assign this qty to any other line/order.
    However, if the schedule line dates are beyond RLT (and your av. check takes RLT into account) of the material, you can go on confirming any quantities irrespective of ATP
    thanks

Maybe you are looking for