Confirmed quantity = ordered quantity but stock 0

Morning SAP gurus i have a scenario where i dont have stock on hand but confirmed quantity at schedule line is = to the ordered quantity.This causes a problem when i receive stock from another plant which is less than what i ordered as my delivery note is created for the original ordered amount.
What can i do to make sure my schedule line does not confirm the quantity that i dont have on stock?
Thanks
Phenyo Ntshabele

"Activate Availability Check (AvC) in your sch line cat (tcode VOV6).
To do so, check/activate/tick mark Availability in Transaction of Sch Line cat.
Or redetermine your sch line cat with active for AvC.
before that, don't forget to check sch line cat determination (VOV5) with your I Cat
Thanks & Regards
JP"

Similar Messages

  • Confirmed quantity in static credit check in sales order

    what our requirement is ...we have a static credit check activated.
    while creating the sales order when ever the customer exceeds the credit limit the check will be activated and the order is blocked with 0 confirmed quantity.
    but we want the confirmed quantity should come as the that of standard order irrespective of credit block.we need the confirmed as well as block should also be there , so tell us is there any settings in the configuration need to be done to acheive this.

    Hi,
    As  per my understanding  u need use routine.
    please read this:example of routine.
      User requirement for confirmation of quantities in availability check
       This is an example of a subsequent function requirement.  If this
       requirement is met, then the system will confirm quantities for the
       sales document line item.  If not, then no quantities will be confirmed.
       ATP requirements, however, will still be passed to planning.  This is an
       example of a user requirement to determine if the confirmed quantities
       should be set to zero or not.  A user requirement would run after the
       system requirement '1' for confirmed ATP quantities.   The sample
       requirement '101' adds the additional requirement that confirmed
       quantities should be set to zero if the credit block is set.
    Best Regards,
    venkataswamy.y
    Edited by: yanamadala venkataswamy on Dec 8, 2008 10:25 AM

  • It still shows confirmed quantity at sales order in case of no stock

    Hi,
    I have the availability check configuration, but my requirement for 0 confirmed quantities at sales order in case of no stock is not working. That is- It still shows confirmed quantity at sales order in case of no stock. Please suggest. 
    All the setting for availability check is done. I have set the accumulation as 3 in checking group. But still not working.
    Thanks
    Mauryan

    Dear Mauryan,
    ATP check will work if you have already turned on ATP check in the following 3 transactions:
    OVZ2
    OVZG
    OVZ8
    You need to turn on ATP at your checking group, requirement class, and schedule line category. If one of them is off, then ATP check will not work. See note 547512, Q1.
    Claire

  • Stock quantity vs sales order confirmed quantity

    when creating a sales order for a particular item, the system confirms quantity 100 whereas when i check the stock status of the material using any inventory report( e.g.. mmbe, mb52), the system shows 200 of the stock in unrestricted use.
    When I simulate the material requiremnets using ATP quantities, the system shows a previous sales order against which quantity 100 is shown as confirmed. However, when I checked that particular sales order, it is already delivered and invoiced(hence it should not be shown in the ATP quantities).
    Can anyone please help me and suggest what is wrong here? it is very urgent.

    I know that 100 materials are already assigned to this order but the problem is that the order is already delivered and invoiced i.e. the whole sale cycle has been completed for that particular order.
    anything else i should check??

  • Reject of sales order position, but the confirmed quantity doesnu00B4t change

    Hi gurus,
    when I reject a sales order position, the confirmed quantity doesn´t change in the schedule line. Internally, after the position is rejected, the available quantity of the material increases in the position quantity, but the schedule lines of the position doesn´t change.
    Regards

    HI,
       Check the sales order entry in Tcode MD04 before and after putting reason for rejection u can definately get the inpact
    Regards,
    kishore.

  • How to Restrict Confirmed Quantity in Sales Order (Based on Batch Expiry)

    Dear SD Experts,
    Currently our sales order confirms any amount of quantity if stock is available. And only during delivery it checks for the expiration of the batch and reduces the delivery quantity to batches available in stock within expiry.
    But since we are doing a bulk creation of deliveries at the end of the day, the check for expired batches is happening too late and no visibility for the data entry operators of stock that cannot be delivered during creation of the sales orders.
    So I am looking for solution to restrict the confirmed quantity in sales order to actually confirm only stock what can be delivered. i.e. based on expiry of the batch.
    Thanks!

    hi
    in Logistic general - batch mangement - batch determination allocation and check activation - maintain allocate SD search Procedure/ activate check
    check this for your sales area and sales document type and then in the search procedure maitain the strategy to check the Expiration date.
    regards,
    Sudhir

  • Confirmation of order quantity

    Hi all,
    please tell me whether the confirmation of sales order quanity depends on the shipping conditions ?
    Eg. If requested delivery date(mandatory)  in sales order is 10.06.2008 and shipping conditions is 2days then the order quanity is not getting confirmed on 10.06.2008 but on 12.06.2008.
    Is it only because of shipping conditions as I have already checked the stock an and all to be available..
    Points will be awarded for satisfying answer..
    Edited by: rupali barbate on Jun 10, 2008 2:32 PM

    Hi Rupali,
    I think Confirmed quantity is Not dependent on Shipping conditions. As per my understanding u have already checked the stock in MMBE and stocks are there but the order is not confirmed?
    Please check the table VBAK For seeing how many orders are open for that item. Some times it happen in MMBE the available quantity is 50, but u wont be able to create order because against these quantities some other order may be created.
    So check this and revert back to me for any clarifications.
    Reward Point if helpful.
    Thanks,
    Raja

  • Cancel Confirmed Quantity in Sales Order Item (VA02)

    Dear All,
    I am having the following scenario :
    Customer have created a Sales Order, item 10, schedule line 1 with quantity 120.  The delivery date is 2011.12.22. 
    They have confirmed the quantity using the "Check Item Availability" function. 
    They have then changed the delivery date from 2011.12.22 to 2011.12.23.  The problem arises that in the "Availability Overview", the system still show the confirmed quantity is on 2011.12.22.  It doesn't release the confirmed quantity after we have changed the delivery date.  And what is worst is the system is prompting me that no stock is available on 2011.12.23.
    Does anybody knows how to release the confirmed quantity in the schedule line.  I have tried in VA02 by modifying the schedule line details.....  but does not work..
    Thanks.

    Hello,
    One easiest way is to reject the line item and add a new line, make the delivery date as 23rd. Once you reject the line item the confirmed schedule line get reversed.
    You can try with CO09 also.
    Regards,
    SAM

  • Delivery quantity greater than confirmed quantity in sales order

    Hi experts,
    Quantity in delivery order can be changed to more than the confirmed quantity in sales order when there is sufficient stock. (Setting "Check overdelivery" in 0VLP already maintained "B-Situation rejected with an error message").
    Anyway in system to check only "confirmed quantity" can be delivered?.
    Regards,
    Liang

    Thanks Ankur for your reply.
    The "Overdeliv. tolerance" in customer master allow customer to deliver more than the quantity in sales order.
    But my situation here is to control the deliver quantity base on confirmed quantity in sales order.
    For example, i have quantity 10 for an item in sales order, and i only confirm 5 to deliver. Let's say my stock has more than 15 quantity, during DO creation, system will proposed 5 but i can manually change quantity to 10.
    I would like to control only confirmed sales order can be delivered. Is this only can control using user exits?
    Best Regards,
    Liang

  • Zero confirmed quantity in sales order

    Hi Experts,
    In a sales order, there is a material for which confirmed quantity is zero in the schedule lines.
    I checked the stock in MMBE, there is around 46 qty in unrestricted.
    Still confirmed qty is zero. Order is not processed since many days.
    I cant figure out why this is happening.
    Am I missing something?
    Please guide.

    hello, friend.
    this means that product allocation is active in your system (QAS).  even if there are stocks existing, but the allocated quantity to your sold-to's order is limited or non-existing, then you cannot confirm sales order.
    you have several options:
    1.  increase the sold-to's allocated quantity, if the previous allocation has already been reached
    2.  if sold-to's allocation has still not been reached, and stocks have already been allocated to other sold-tos, increase overall stock availability (but this is easier said than done)
    3.  deactivate product allocation, re-run availability check (or re-enter items in order) to confirm quantities
    regards.

  • Updating confirmed quantity in sales order

    Hello Experts,
    I have a question regarding ATP functionality. Suppose I have a stock of 50 units in my plant. If I create a sales order of 100 units then 50 units is confirmed and remaining 50 units is open. Now if I put additional stock of 50 units in plant then I want the open quantity of 50 in sales order to be automatically confirmed. But right now it's not happening like that and I have to manually go to the sales order and do ATP check to update confirmed quantity. Am I missing any configuration to update the schedule lines automatically in sales order?
    Thanks,
    Karan

    I want the open quantity of 50 in sales order to be automatically confirmed
    No automatic allocation will not happen in the above case.  Either you have to do availability check for that sale order or have to run V_V2. 
    Am I missing any configuration to update the schedule lines automatically in sales order?
    No configuration is available such that system to allocate stocks automatically as and when the stock is made available.
    G. Lakshmipathi

  • The sum of the confirmed quantity exceeds the sum of stock items

    Hi,
    I have two sales order. Material is same. Both of them related project stok.
    First sales order's qty=1. I created purchase order and post goods receipt.
    Second sales order's qty=2. I created only purchase order.
    I cannot create delivery for first sales order. System giving message.
    Information message : The sum of the confirmed quantity exceeds the sum
    of stock items
    20000978     10     Only 0 ST of material 7ML18301CF  available
    20000978     10     An item with no delivery quantity is not permitted. Item will be deleted.
    But I have a 1 qty on project stock.
    Please help me.

    hi,
    this is to inform you that,
    please run this report in SE38, SDRQCR21 if you have any inconsistencies in the system.
    it seems there is an issue with MARD-DISKZ  & please correct it.
    but i have a doubt MB51 is material document llist.  why you are checking stock there.
    please confirm.
    regards,
    baljia
    Edited by: balaji timmampalli achari on Nov 17, 2010 9:00 AM

  • ATP,confirm quantity for Purchase Order related Sales Order

    Hi everybody,
    I have purchase requisition related sales order item. I created purchase order with this PR.
    I entry confirmation date and quantity on the PO.
    Sales order item's delivery date equal to purchase order item's confirmation date.
    Sales order item's confirmed quantity eq purchase order item's confirmed quantity. It is ok for me.
    But, goods receipt not do yet for this purchase order and sales order stock = 0.
    If I run VL10N for this sales order, I can create delivery.
    I wants to see availilable sales order stock item on the VL10N items. How can I see?
    or
    If no goods receipt for sales order items then sales order item confirmed quantity can equal 0. How can I do?
    Best regards
    Gulay Celik

    Hi
    You can meet your requirement in multiple ways
    1) Modify the requirement routine for copy control from Sales order to Delivery  that DO not create the delivery for third party orders unless the GR is posted for the respective sales order.
    2) IF you have implementded Inbound Delivey functionality in your system, You can change the availabiltity situation every time you modify the GR dates and times. Modify the PO user exit that when ever a new confirmation Key LA is entered in the purchase order it goes and updates the schdule line dates and quantities in the order based on the dates entered in the LA confirmation key.
    and even if delivey gets created also what is the problem ? The GI cannot be posted though unlsess there is sufficient stock.

  • Delivery quantity is greater than schedule line confirmation quantity (sales order)

    I am creating a sales order with 30 Mt. I confirmed 10 Mt (partial confirmation and based credit block) in schedule line Now I am going to create the delivery system automatic taking 10 Mt but when I am going to change the delivery means when I increase the delivery quantity (20 Mt) then system allowing to do the further process.
    As per my understanding system should not allow to increase the delivery quantity m     ore the sales confirm quantity.
    Please suggest how I can restrict.
    Thanks & Regards
    Sujit

    Thanks for your reply,  As you suggest "B" is there. But its not working.  For ref. screen shot is attached.
    For reference I am providing some more details:
    => We are using "Make to order" process. After creation of sales order we assign the stock to sales order using T-code MB1B , Movement type 412E, 
    => Auto credit check applicable
    => Confirmed quantity in schedule line based on credit limit.(Auto credit check at Sales order level)
    => Avail. Check is 02 and check. rule is "AE" .
    Thanks and Regards
    Sujit

  • Confirmed quantity on the schedule line tab is 0 in Sales Order Screen?

    Hi,
    I created a sales order but the Confirmed quantity field on the schedule line tab is 0 .
    There is unrestricted  stock present in the plant also.
    I am not able to do delivery because of it.So,please let me know if I need to check anything.
    Regards
    Nicky Samtani

    I checked the avaliability screen and it shows me 3 columns
    Received/Req Quantity = 15.386
    Confirmed = 0
    ATP Quantity = 0.
    Does that mean that There is no stock avaliable for my SO and if it is then why Received/Req Quantity = 15.386  is coming.
    Also is there any way I can get rid of this error by putting some more stock in the plant or anything on similar lines?

Maybe you are looking for