Conflict between 2 business services for the same SAP R/3 instance

Hi,
We developed a packaged solution that connects to SAP R/3 with RFC Adaptor and idoc Adaptor.
We deliver design and configuration packages defining the entire integration schema between an external system and SAP.
The configuration defines a business service BS_SAP_R3 containing RFC and idoc communications channels.
When we deploy and configure the solution (design and config) on a XI instance we have a conflict.
As the XI already contains a Business Service connecting to the same SAP instance (other integration) we want to use with our business service BS_SAP_R3, we have an error when configuring the Adapter-Specific Identifiers properties R/3 System ID and Client from the section IDoc Adapter and RFC Adapter with the message, for the BS_SAP_R3
Check Result for Object BS_SAP_R3
SAP system ID D46 and client 800 already exist in service | BC_TEST_SAP_R3 
Is there a way to solve this conflict problem?
Thanks for your help.
Adalbert

Dzieki za odpowiedz
Could you give more details about the design issue and what you have on mind?
I also suspect a design issue but do not know how to solve it...
If in your Configuration you have 150 Receivers Determinations, Interface Determinations and Receiver Agreements referencing the same BS business service to access SAP, can you make the service configurable in any sort
Can you recommend another solution?
The only solution I see it to regenerate all the configuration by hand using the already exiting SAP BS But for 150 objects it is not a real solution...
Thanks for your help
Adalbert
Wojtek

Similar Messages

Can I buy multiple AppleCare services for the same device?

I'm buying an IPhone here in US, but I'm going to Brazil for a long time.
Must I buy AppleCare in Brazil in order to have warranty insurance there? Is it possible to buy AppleCare+ in US and also in Brazil, for the same IPhone?

As said in another of your posts, the warranty is only valid in the US on a US purchased iPhone...you cannot purchase AppleCare for it in Brazil. You can only buy AppleCare+ warranty extension in the US since that is the country of origin of the iPhone.
To get warranty coverage in Brazil, you need to purchase the iPhone in Brazil.

Why does my itunes generated "purchased" playlist differ between different computers for the same library?

One computer (my newer one with Lion) doesn't have any music before 7/2008 included as "purchased" but still has all the music in the general library that the other computer has listed in the "purchased" playlist (going all the way back to 2006) automatically generated by itunes. The other computer (the one with the correct purchased playlist) only has snow leopard but apparently can still work with the cloud as it has all the new downloads/purchases that have been completed on the other computer. Is this related to the Itunes plus thing - are all the songs before 7/2008 or whatever the date is not itunes plus and that's why they are not showing up as purchased in one computer? I think I can fix this by creating a special playlist of my own to sync between the two of them, but it would be nice to have both purchased lists be accurate for the synced library. Any thoughts or suggestions would be appreciated.

You can transfer iTunes content from an iTunes library on a single computer only.
Since these songs were purchased with the same iTunes account, you can download the song that is not in your iTunes library on the computer you will be syncing your iPhone with. Or you can download the song or songs direct on your iPhone.
http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US

Two business ofices for the same plant:

Hi frndzz..
   I'm doing implementation for my new client.
His factory(plant) is located in a village & he got a head office in the city which looks after the sales & purchases for the plant and the head office. In the same way, the plant also purchase from local vendors.
They do have some common vendors.
They need Accounts reports / Purchase reports / salaries / creditors and vendors all required as per the above seperation i.e., plant & head office.
   Our suggestion was to use seperate ledgers in the chart of accounts so that we can reporting on both of them but they need one ledger but to maintain the data seperately based on the postings where they want to choose to post to head office or plant.
How can we do it. For ex: stationary expenses, I have one account but posts to it by choosing head office or plant while posting so that they can a report on it.
fair answers will be rewarded immediatly.
thanks in advance,
chaitanya

hey jagadish,
     sorry for the delayed reply. We are using only one company code.
others...any clue how to handle this??
thanks in advance,
chaitanya

How to get 2 spools for the same SAP script

Hi,
I have a requirement where i have to get 2 spools when i run the script once. Please suggest me the how to achieve this.
Thanks in advance.

Hi,
I believe u need different pages of the Scirpt output on diffrent spools.
If Yes, Use START_FORM & END_FORM in the looping of your MAIN window data in Driver program.
Regards,
Bhargava

Business System or Business Service for ORACLE system

Hi all
We are creating a configuration scenario which includes a oracle database as receiver .Please clarify me whether to create a Business System or Business Service for the oracle system.
Full Points will be awarded
Thanks and Regards
Uday

Hi,
We use Business system when we know the SLD Details(PRD,SWCV & TS)
We will use Business Service when we dont know the SLD details and we know Partially
We can create the Business system in SLD
We can create the Business service in ID itself
Difference between Business System and Business Service
So Decide your self now to create the Business system OR Business Service
REgards
Seshagiri

OSB: Configuring business service for JMS Queue

Hi,
I want to produce messages into a JMS queue from OSB proxy service. I have created business service for the JMS queue. I also want to return Status code=200, Status Messgae=Success if the message is successfully inserted into the Queue. Kindly let me know how to do this.
I tried using Service Callout to call the business service but it is not allowing me to use it because my business service is a one-way operation. So, i tried with Publish activity but my doubt is how and where to configure request payload for the publish activity. I could not find any.
And how do i know if the message is successfully inserted so that i can send the Status=200 back to the calling proxy service.
Kindly help in this regard.
Thanks in advance.

As suggested, use QoS=ExactlyOnce as RoutingOption within the Publish to business service. If there was any error it will send the flow to error handler where you can do a reply with failure to return HTTP status code=500 to the caller of the proxy service.
If you do a reply with success the caller will receive HTTP status code=200

Can we use same Business Service for Sender and Receiver

Can we use same Business Service for Sender and Receiver

Hi
In addition to the above infomation explaining about the Business Service..
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
The business services are used when configuring cross-company processes also..
regards
Kishore

Can you share photos between machines that use the same wifi network? Thanks for your help.

Can you share photos on i-photo between machines that use the same network or even between different accounts on the same machine? I know you can share music on i-tunes but can you do the same on i-photo? Thanks for your help.

Yes.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
You can figure out using it with another machine from that too

Double service entry sheet for the same invoice and same period

Hi,
2 service entry sheets have been made for the same PO with the same period and the same invoice no. And hence by mistake 2 bills have been passed for the same work...
how to avoid this.....
is there any std.setting available while creating service entry sheet.
Plz. help
Navin

If there is sufficient quantity in the PO, this cannot be prevented by the system.
Have the data entry person write the SE Sheet number on the physical copy of the bill so that another person entering it can see that SE Sheet is done.
Hope this helps,
Lakshman

I am passing range table from the method of ODATA Service to FM but In FM range table is becoming initial.What would be the reason for the same?

I am passing range table from the method of ODATA Service to FM but In FM range table is becoming initial.What would be the reason for the same?

Vinod, Can you share detail on how are you sending and how are you reading.

I'm being charged three times for the same service and I can not use it

Hello, A few months ago I tried to buy Adobe Creative Cloud when putting the data on the card told me that there was a mistake, then I tried other cards ... in short, I'm being charged three times for the same product twice a card and once in another obviously no "mistakes", the problem is that I can not use the product. I want to give low in all three accounts and also be compensated for the time they have charged me three times. Please, I need to solve this urgent problem.

This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

How can I using tpcall from one service to another service in the same server

When I using tpforward between two services in one server, it's working ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?
thanks
george

"george" <[email protected]> wrote:
>
When I using tpforward between two services in one server, it's working
ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?Basically, tpcall:ing another service in the same server is a no-no, unless you
a) are running a multi-threaded server (requires TUXEDO 7 or newer + compilation
options) or
b) use tpacall() instead of tpcall() and specify the flag TPNOREPLY. This is probably
not what you want to accomplish, though.
The reason is that TUXEDO servers by default (and always in versions before 7)
are single-threaded. If service A and B both reside in server X, server X will
be busy taking care of the call to A. If A makes a call to B, the call will be
put on the queue to X, but X will not look at the queue until it is done with
A, which won't happen until B returns... deadlock!
You can play tricks with starting multiple instances of X, but in the end you
will always face a risk (something lika a race-condition) for a dead-lock.
Solution: Move service B to another server (usually quite easy) OR switch to multi-threading,
if that's possible. Just make sure all code your service calls is MT-safe as well...
thanks
georgeHope this helps you,
/Per

Diff between Business service and Business System?

HI Experts,
Pls let me know wht is the difference between business service and business system??
when we will have to go for business service and when for business system??
thnx in advance..
New XI

Hi,
Difference between Business Service and Business System are :
1) Business sytem require all details like login user id
password require to create but in case of business service
log in details does not require..
2) A Business System is purely for SAP-Systems and
Business Service for Non-SAP systems
3) Business service refers to any business applications where
as the business system is defined in SLD(System Landscape
Directory)
4) When we have full details of application system the we are
going to use the business system and it is created in the
SLD so we dont have authorization to change the business
system name.
When we have partial details or no details of Technical
system then we r going to use the business service. it is
created in the ID. we can see and change it.
5) A Business system is something that physically exists
For example, if u want to download a file from a system
ABC, by using file adapter and then want to update the
content of this file into r/3 database by using RFc,then
the system abc and the r/3 will be ur business systems
i.e. they physically exists. Business Systems are
configured in SLD.
Business service is mostly usedin B2B Scenario (cross-
component),where you don't know the Business System of your
partner. In other words business Service will be used only
for those partners which do not have a physical landscape
set up . Business servces do not have an entry in SLD.
6) A Business Service is an Abstract Unit(which is not in
System Landscape Directory) addressing Senders and
Receivers of Messages.
Physicals systems which use their communication channels
and routing rules to communicate with other systems are
called as Application Systems OR physical systems.
7) In simple when u going for A2A integration then we define
our Technical systems are Business system. If we r going
for B2B integration then we dont know the complete
information about the other end Business Landscape so, we
configure it as a Business Services. Business system are
created at SLD. Where as a Business Services are created at
Integration Directory.
8) Business systems:
These are logical senders or receivers that exchange
messages by using the Integration Server and that are
entered in the System Landscape Directory.
The business systems in the System Landscape Directory
relate to a system landscape. The business systems of
business partners are therefore not entered in the System
Landscape Directory. To be able to address such business
partners logically, use communication components in the
Integration Directory. A business system is a way of
specifying a communication component in the Integration
Directory more precisely (business system component).
Hope this will hwlp u..
Regds,
Pinangshuk.

Can there be more than one port for the same logical system

Can we have more than one TRFC port for tranferring data from one logical system to another?
The requirement is to transfer same basic idoc type from one logical system to another through two different ports. Is it possible?
For eg. some specific data (country specific) for the same basic idoc type can be sent through a separate port and the other data through a different port inorder to distinguish between the two.

Hi Shital,
I don't think so. Because of that what i told you. There would be a dirty trick (back routing) to solve your issue. But its quite difficult and not standard. You create two http receiver services and two http sender services. You route your message depending on payload to the one or the other http receiver channel. The receiver is in both cases: THE XI! Now you have a second message, which you can route to IDoc adapter. But in this case you have different sender and in the receiver determination you can put the sender, so you will be able to use different communication channnels and so different ports / destinations.
Advantage: Your task would run, no performance problem (http: very good, asynchron)
Handicap: You see every message double in the monitoring, the scenario is not easy to understand and it is a big task 4 other people to change it.
Regards,
Udo

Conflict between 2 business services for the same SAP R/3 instance

Similar Messages

Maybe you are looking for