Conflict between CS6 and CC on my PC.

When we were about to purchase Photoshop, I downloaded and installed the PS-CS6 demo. Right around the same time, CC was launched, and we subscribed to that instead. When I open PS, it says CC. Even if I click on the CS6 icon that's still in my program menu, it opens as CC.
Some other Adobe products, however, think I have CS6 only. I tried to install a new action table for CC and got a warning that said I could not proceed because I did not have CC installed. Instead, I installed the CS6 table version, and the Adobe Extension Manager allowed that. Once I re-opened PS, however, the new action table was not installed.
So, it's not possible for me to run CS6 on my machine, and CC runs perfectly, but the Extension Manager thinks I only have CS6 on my machine.
Thanks. Photoshop is still the greatest program ever created.

Thank you for the reply. Your questions got me thinking, and I as able to fix it.
PS CC is 14.2 x64.
The extension manager (for CS6) is version 6.0.7.6. I noticed another folder for the CC extension manager, but could not open the manager from inside there.
I went into PS CC x64, and from inside that I clicked to open the Extension Manager, and the CS6 EM is what opened. Then I saw the command "Install Extension Manager," so I did that and the CC extension manager installed. Now the other table and actions I was trying to install have been moved into CC.
Thanks for your help.

Similar Messages

File Association conflict between CS6 and CC 2014

I have both CS6 and CC2014 loaded on my computer.
I want to use CS6 for file associations, but I am being prevented from doing so by CC2014 which pre-emts CS6 and blocks me from changing file associations for .jpg files etc. in Windows 7. How do I fix this?

Are you sure? I just had a quick look, and by taking the usual route or right clicking a JPG and choosing Open With > Choose Default program, I was able to browse to the pre 2014 version of Photoshop, and assign it. I don't have CS6 installed at the moment, but I can't think why it shouldn't work the same way.

Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device.

Sometimes, while playing back my software instrument songs, I get an intermittent pop-up error message, saying "Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device."
(Sometimes the five digit number is different, but remains a five-digit number beginning with "4".)
Simultaneously, the song stops until I press the "Okay" button in the pop-up window.
When I continue to play the song, the sound is jerky and clipped, and the playhead doesn't keep up with the song, and then suddenly jumps to the part of the song currently being played.
There's also a sound of static.
The issue seems to occur whether or not I have my MIDI controller turned on and plugged into my desktop Imac.
Tony

Hello,
open your Audio MIDI Setup utility and set the input to 44100
https://discussions.apple.com/message/12710638#12710638

How can I resolve conflict between itunes and Windows 8.1

When downloading itunes to my laptop computer, using Windows 8.1 my email/network account will not work on that computer. It is fine on other devices such as ipad and Windows phone. I can also pick up emails on online on the same laptop. There appears to be a conflict between itunes and Windows 8.1

Please see Boot Camp for comments.

Can I use a Photoshop CS6 guide book I got in college to learn CC, or is there too many differences between CS6 and CC?

I have a guide book I got in college to help me learn Photoshop CS6, but I never finished the class. My question is: Can I use this book to learn Photoshop CC or is there too much diversity between CS6 and CC?

caj50932876 wrote:
Thanks! I appreciate you answering so quickly!
That's OK. We race to be the first responder, because we are sad geeks, and first responder sounds like something from a TV reality program. Benjamin actually has flashing lights and a siren on his computer.

[JS CS3] Conflict between palettes and panels

Hello,
I am having a conflict between panels and palettes. Hopefully I can get some direction without having to copy the code here, because it is very long.
I have a window of the palette type. This palette has buttons and radio buttons. The buttons call up various functions.
The radio buttons, however, make visible/invisible a series of panels in the palette. The panels are stacked upon each other, only one of which is visible at any one time, depending upon which radio button is selected.
One of the buttons in the palette calls up another palette (which also has a series of buttons for various functions). Let's call it the little palette. The problem is, that after the little palette is called up, the radio buttons in the big palette no longer work. I can select them but they will not make visible/invisible any of the stacked panels. The buttons in the visible panel work as well as all the other buttons that are always visible. The only thing that does not work are the radio buttons.
My only workaround is to just dismiss the palette and call it up again. But I'd rather fix this bug.
Any ideas? If I need to I can strip down the coding leaving only the essentials, but rather not take the time if this is a problem others have run into and hopefully have a solution for.
Thanks,
Tom

Thanks. I'll give it a try, but I even uninstalled both programs, tried
reinstalling Reader only, and when that didn't work, uninstalled Reader and
then reinstalled Acrobat. Still a problem. The particular website is
www.officeally.com, and it opens the PDF file in a browser window, I believe
using an ASP file.
Larry

Name space conflict between static and instance method

Hello,
there seems to be a very unfortunate name space conflict between static and instance method name. Consider:
static String description() that should return a description of a class.
String description() that should return a description of an instance.
That seems to confuse the compiler. How come? Static and instance methods don't have anything to get confused about.
Thanks for any insights :-)

Umm...jeez.
It's not a bug, it's the way it's supposed to be.
Since a static method can be called the same way an instance method
A instance = new A();
A.staticMethod();
instance.staticMethod();it's not allowed.
Also in the class, you can call
public void myMethod() {
instanceMethodInClass(); // You don't need this, it's superfluous
staticMethodInClass(); // You don't need the class name.
}If you didn't understand, then just accept the fact that it is so. Some day you'll understand it.

Software conflict between iPhoto and Sony MP3 player

I am experiencing a major software conflict between iPhoto and my Sony MP3 player (model: NWZ-E443). In the past, whenever I connect the MP3 to my 2009 MacBook Pro, iPhoto always opened. I would simply close iPhoto and everything would be OK, though. But after upgrading iPhoto a few months ago via an upgrade download I am now unable to view images full-screen. Although thumbnails display OK, when I double-click on any of them to display full-screen, the MP3's 'Do Not Disconnect' image displays full-screen instead, even when the MP3 is not connected.
I have tried reinstalling iPhoto from the original iLife disc, but this didn't work and my fear is that the Sony software has somehow corrupted every image single file in my library.

Turns out my Mac put code on the mp3 player because after I reset the mp3 player to its 'factory settings', (erasing everything) it went back to normal and now shows up in the finder window.

Conflict between VPN and Airport disk

Hello Folks, I just bought a brand new airport extreme 802n.
I thought it would be working fine with my Macbook pro, but it doesn't.
I can't access any externe hard disk or USB Stick through the airport extreme, although the format is FAT32. I checked and checked but found nothing useful. All the settings are default.
Worth to mention, I always use a cisco VPN client to get connected to the Internet (university student).
There are few times when I disconnected the VPN Client, the USB Client can be found and read, but not be written.
I though it is a conflict between VPN and Airport disk. So I tried without VPN, but the USB stick and the extern hard disk still didn't work properly. I have no idea what is happening could somebody help?
By the way is it possible to set Airport extreme as a VPN router so I don't have to use the cisco VPN client anyway?
Any reply is appreciated
Thank you !

I have an Airport Extreme connected to a cable modem
with comcast as my isp. The Extreme is connected to
a G4 dual processor mac via ethernet. I also have 3
airport expresses around the house to work as range
extenders. When I had the G4 connect to the Extreme
via its internal airport card, I had no difficulty
connecting to any of the Expresses around the house
with my g4 powerbook. Now that I have the G4 Dual
directly connected by ethernet to get the fastest
speed, I cannot get my expresses or my laptop to
connect through my laptop to the base station. all
lights are green on the expresses, but running
network diagnostics on the powerbook shows red or
yellow for the last two buttons on the right. Do I
have a configuration problem or an Extreme that won't
bridge properly?
Check that the G4 Dual has a location configured with
only "Built-In Ethernet" activated, and that its
Ethernet connection isn't shared on AirPort.
Turn off all your AX and check that your
PB G4 is able to connect to "your" AirPort network.
Take advantage of this silence of all your AX
to run an analysis of your wireless environnement:
- check that you don't have any neighbor wireless
network,
- check that on each of your AX settlement you have a
very good reception of "your" AirPort network.
If everything works fine to that point, add one AX to
your network, and check the reachability of your network
where you wanted to extend it.
dan

Metadata Conflicts between LR4 and CS6

I recently upgraded to LR4 and CS6 Extended. I will offer start in LR4 but switch to CS6 for additional editing. On some of my thumbnails, I will see a "!" in the upper right hand corner on the thumbnails. When I click on the icon, a pop-up window appear stating a Metadata conflict has occurred. The pop-up window gives you two options: Copy file data into the catalog or have the catalog overwrite the file data. What is the best thing to do knowing you are only working between LR4 and CS6?

This is a known issue with the latest PS update. Refer to the pertinent thread on the PS forum.
Mylenium

Conflict between audigy and Olympus voice recor

I have an audigy se recently installed. Seemed to be working fine until I opened my Olympus voice recorder program. Just opening the program knocked out the sound card and I could not get it back again. No speakers in any application on the computer except the diagnostic test. Then the speakers would play. But no cd's, no wav files, no nothing. Tried checking and unchecking all the boxes. There really aren't that many. Only way to solve the problem was to uninstall and reinstall audigy and not go to Olympus anymore. I've done that several times to confirm that is the problem.
Any suggestions?
(5. sourround)

Bazbear wrote:
Could anyone help me to resolve the conflict between my Soundblaster Audigy 2ZS and Norton antivirus. The auto protect feature is constantly being turned off on boot up. According to Symantec the problem is caused by conflict between the two soft wares. The Creative page does not mention this at all and the work around on the Symantec site either does not work or entails time wasting closing of programs and re-boots. It is really getting to me now and I wonder if any one knows of a permanent fix?
Bazbear
Some past post here mention of this too.....and the mods suggestion does indeed helped some of them resolve it. Perhaps you can try it. What you need to do is uninstall all Norton and Creative software. When you're done with that, install Creative software first follow by Norton stuff.

How is the XMP workflow supposed to work between CS6 and LR4.1

Can somebody please enlighten me ?
I have a raw file in Lightroom, xmp files turned on.
I open the file as a smart object in Photoshop.
Back in Lightroom I do some edits, and to be sure, I save the edits back to the XMP.
Back in Photoshop, no matter what I try, my edits are not picked up. I tried opening the smart object etc...but ACR does not pick up the edits I just made in Lightroom (even when the XMP file is up to date).
If I resubmit the edited image from Lightroom, my edits are picked up, but this can't be the way it's supposed to work, can it ? What good is a smart object if you need to resubmit it each time...
Isn't the XMP workflow supposed to be seamless between adobe applications, picking up any edit, no matter where the edit is made (from acr to lightroom and vice versa) ?
I'm probably missing something, but would appreciate some help.

Taking a little distance and looking at it from that angle, I can understand why it works the way it does now.
Still, I feel there are some missed opportunities here.
Compared to working between indesign and photoshop, when I have an indesign layout and I later edit the placed photoshop document, Indesign gives me a warning that my version is changed and I can update it to reflect the latest state.
A similar thing could be done here inside photoshop "update to latest Lightroom edits" or something similar which could be totally optional for the end user to use or not.
My confusion was mostly caused by the XMP files, it stuck in my head that these were external files holding all knowledge and no matter which Adobe program you used, it would work with those same xmp files... but I understood wrong apparently.
I still have a lot to learn, thanks for all the answers, it is very helpfull.

What's the difference between CS6 and CC apps?

I am confused. I am running CS6 and having problems with Adobe Exchange in Illustrator - works fine in PS and INDD.
For some reason Illustrator cannot find an internet connection. Tried ALL of the prescribed troubleshooting but it's still broke. Is there any advantage to running CC versions of the apps?

iPad apps are designed specifically for the iPad and will not run on the iPhone or iPod Touch. iPhone/iPod apps will run on the iPad, but will only take up an iPhone sized portion of the iPad screen (though you get a 2x button which effectively doubles each pixel in both directions so may appear pixelated). There are also 'universal' apps (which have a '+' symbol against them in the store) which have processing in them to recognise the device that they are on and will tailor the display accordingly (so will make use of the iPad's larger screen).

Difference Between CS6 and CC Versions

I started the update to my CS6 software thinking that all this talk about the upgrade being designated as CC was a Marketing move. Instead the Application Manager installed the CC version and kept the CS6 version installed. What's the difference and why do we need both the CS6 and CC verions on our machines?
Thanks in advance! - Ron

Or, as in my case, Muse gives you an registration error message one day and won't launch (thinks I'm using a beta version when I'm not). Adobe support eventually advises you to remove all your copies of everything Adobe on your machine, including preferences etc. CS6, 5, 4...
Support sends you a link to download Adobe Application Manager because you can't download it from your My Adobe. It works and you have time to download two of your Adobe apps because your day has been shot. Next day you launch Adobe Application Manager again and suddenly it upgrades and turns itself into Adobe Creative Cloud but won't actually launch as an app-managing app. Some kind of glitch. Now your array of CS6 apps doesn't exist anymore and you can't finish downloading your CC set.
Adobe takes desktop control of your machine (very nice support feature) and can't solve it after an hour or so and so tell you to restart after creating another admin user, severing the chat connection. Now I'm waiting another hour for a chat representative to take my chat and hope for the best.
Makes me wonder whether the boxed sets weren't better after all.... at least you knew you could reinstall something and DIY.... you weren't so completely and utterly dependent on Adobe support.
OS 10.8.4 Imac 27" 3.4ghz 16GB

Is there a conflict between Firefox and Carbomite?

I have been having problems with unresponsive script errors in Firefox, in both normal and Safe modes. I got the idea that one of my background programs could be causing the problem, so I disabled all of them and then enabled them individually. Enabling Zone Alarm did not cause a problem, so I enabled Carbonite. Sure enough, the unresponsive scripts returned, in both normal and Safe modes. Is there a known issue between Firefox and Carbonite that causes unresponsive scripts and, if so, what can I do about it short of disabling Carbonite? Thanks for any help!

I have been having problems with unresponsive script errors in Firefox, in both normal and Safe modes. I got the idea that one of my background programs could be causing the problem, so I disabled all of them and then enabled them individually. Enabling Zone Alarm did not cause a problem, so I enabled Carbonite. Sure enough, the unresponsive scripts returned, in both normal and Safe modes. Is there a known issue between Firefox and Carbonite that causes unresponsive scripts and, if so, what can I do about it short of disabling Carbonite? Thanks for any help!

Conflict between CS6 and CC on my PC.

Similar Messages

Maybe you are looking for