Conflict between distribution of applications and autostart

Hi,
we're using Zenworks 4 and Windows 2000 and Netware 6.5(?)
I'm trying to run a perl script to install a software package, doing some modifications. It has to run with admin rights.
We've tried to use Zenworks. The installation works fine except that the Windows-Autostart-Folder is executet during the installation. Some users autostart programms which are disrupting the installation.
So we've tried to start the perl script in the netware loginscript with "#nal.exe <path>/wperl.exe perlscript.pl" before the Windows autostart.
It's executed correctly but it hasn't the necessary admin rights and we won't use something like runas (with passwords) because of security reasons.
We've also tried to start the NAL-Application-Object in the Loginscript with
something like "#S:\nal.exe /A="TREE:.NAME.GROUP.Applikationen.ZEN.POR"
Nothing worked.
How can I execute the perlscript without interfering with the Windows Autostart Objects?
Thanks for any hints!

What is it about the "AutoStart Programs" that are causing the issue?
#1) You can use the /Time Parameter to delay the launching of NAL. (I think
that parameter is valid in ZFD4 but not 100% sure.)
#2) If it is specific processes, you could use a command to terminate the
processes known to cause issues.
#3) You could place a delay in your Pearl Script so that everything is up
and running before your script starts
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"klausnodop" <[email protected]> wrote in message
news:[email protected]...
>
> Hi,
> we're using Zenworks 4 and Windows 2000 and Netware 6.5(?)
>
> I'm trying to run a perl script to install a software package, doing
> some modifications. It has to run with admin rights.
>
> We've tried to use Zenworks. The installation works fine except that
> the Windows-Autostart-Folder is executet during the installation. Some
> users autostart programms which are disrupting the installation.
>
> So we've tried to start the perl script in the netware loginscript with
> "#nal.exe <path>/wperl.exe perlscript.pl" before the Windows autostart.
> It's executed correctly but it hasn't the necessary admin rights and we
> won't use something like runas (with passwords) because of security
> reasons.
>
> We've also tried to start the NAL-Application-Object in the Loginscript
> with
> something like "#S:\nal.exe /A="TREE:.NAME.GROUP.Applikationen.ZEN.POR"
>
>
> Nothing worked.
>
> How can I execute the perlscript without interfering with the Windows
> Autostart Objects?
>
> Thanks for any hints!
>
>
> --
> klausnodop
> ------------------------------------------------------------------------
> klausnodop's Profile: http://forums.novell.com/member.php?userid=10720
> View this thread: http://forums.novell.com/showthread.php?t=316787
>

Similar Messages

Conflict between program Mac mail and program Microsoft Outlook e-mail???

Denmark, Kolding, 30th of September 2010
A conflict between program Mac mail and program Microsoft Outlook e-mail?
For several months tried to discuss and resolve with several Apple specialists/support, but without much luck.
Therefore I have discussed these issues with 2 different and independent Mac users to find out in testing other Mac users will have the same problems as outlined in the below mentioned situations.
I will therefore outline the coverage issues, as mentioned, including occurs on my iMac 21.5 " with serial number: <Edited by Host> and 2 friends with their Macbooks of new dates as follows:
1. Sending from my Mac plain mail as "plain text "(during formatting):
Plain text mail as "Plain Text "(during formatting) Verdana font size 10, sent and received on Windows PC with the correct letter size - but with the font changed to Century Gothic!!!
2. Sending from my Mac plain mail "formatted text" (during formatting):
Eg. with my signature/signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text dispatched - the mail received as text with New Times Roman size 12 and signing /signature color Verdana now in size 13.5!!!!
3. Sending plain mail "as normal text "(during formatting)
In the mail text underlined and made bold - the program asks whether to convert to RTF format (to keep underlining, bold, etc.) and Verdana as font and size 10, YES - this mail is received on the Windows PC as text with New Times Roman with the desired underlining and bold text and size 12!!!!
4. Plain text mail as "formatted Text"
Eg. with signature / signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text sent - received as text with New Times Roman and signing / signature as colored Verdana now in size 13.5!!!
5. Sending mail with file attached:
After producing a normal text document modified to PDF and directly from the Adobe Reader sent this PDF file in e-mail formatted as normal text with font Verdana 10 point, with signature. This is received on the Windows PC with a PDF file OK, but the font of the mail text is changed to Century Gothic and missing signature. Signature is available as an attachment on the Windows Outlook e-mail program as a ATT00113.text file. This can be opened and there is the missing signature!
6. Sending e-mail with photos directly from iPhoto
iPhoto opens and click on the desired photos eg. 5 pcs. (Exactly as mentioned in the demo video!) and click on the e-mail icon at iPhoto and the program opens and e-mail that is opened with the attached photos and rich text is being used in the mail. Signature disappears and must be clicked on the mail by the sender.
The mail is received with the attached pictures OK - text changed to Times Roman with the desired bold - though no signature and 5 pcs. Att0028.html files attached. These can be opened and contains the file number each picture!
The above problems can be partly avoided by the following:
1. Only send mails as plain text
Without any underlining, attachments, etc.. When the Windows PC Outlook receiver opens the mail where only the text fond is changed!!
2. Sending mail with attached file
Start opening the mail program and use formatted plain text first and then attach (with the staple) file, and the Window receiver will get the file, but text and signature changed to Times New Roman size 13!!
3. Sending mail with photos from iPhoto
Start by opening mail program text in Verdana 10 and click the Photo Browser and find (look for - takes its time!) the pictures you want to send and pull/drag them into the mail and send, - images, text and signature are in the mail on Windows PC - but with the font changed to Century Gothic!!!
If sent as formatted text with various underlining, italics, etc. together with the photos will be received OK - but the writing is now New Times Roman size 12 signatures Verdana now in size 13!!!
I must say – I am disappointed with the Mac mail program – it actually means that sending a perfect mail with underlining, colours, a.s.o. also photos directly from iPhoto – will received at a Windows computer in a totally mess.
Looking forward to some good news from either Mac supporter or some clever Mac users who can help me to adjust my Mac to avoid these problems IF POSSIBLE!!!!.
Apple/Mac is too good a product to make these problems!!
Best regards
Peter Larsen
<Edited by Host>

Welcome to Apple Discussions!
The PC sets the font on its side, the Mac does on its side for plain text. There is no "font size" in plain text coding. Rich Text gives you a bit more control, but only if both e-mail clients support it. HTML gives you a bit more control, but only if both e-mail clients support it. Use the asterisk, parenthesis, underscore, or any keyboard symbol that is part of the original ASCII. Otherwise, the chance is nobody else will be able to read it who does not have your e-mail client in the same version.
Sadly there are no e-mail standards except MIME for attachment, and even that isn't universally supported. E-mail is not the ideal medium for anything except plain text that is ASCII. To learn more about ASCII, see:
http://en.wikipedia.org/wiki/ASCII
If you want to post a website that is universally understood, see the hints here:
http://www.anybrowser.org/

Conflict between refeneces in Lightswitch\ and Silverlight\ after update to Visual Studio 2013 12.0.40302.00 and SQL Server Data Tools 12.0.50226.0

After updating VS and SSDT there began a conflict with references in two directories under the SDKs folder (Lightswitch and Silverlight):
Error 91
The type 'System.Data.Services.Client.DataServiceCollection<T>' exists in both '
...\Microsoft SDKs\LightSwitch\v4.5\Client\Microsoft.Data.Services.Client.SL.dll' and 'both '
...\Microsoft SDKs\Silverlight\v5.0\Libraries\Client\System.Data.Services.Client.dll'
...\SPDCDataObjectContext.cs 1478
52 Spac.DesktopClient
I thought since the Lightswitch directory was newer that I would comment out the Silverlight directory and see how far that would get me. Now I get:
Error 16
The type or namespace name 'Composition' does not exist in the namespace 'System.ComponentModel' (are you missing an assembly reference?)
...\Spac.DesktopClient\GeneratedArtifacts\ApplicationGenerated.cs
13 36
Spac.DesktopClient
How do I handle the original conflict between refeneces in Lightswitch\ and Silverlight\ ?
Scott Mitchell

Thank you. Yes that resolves the conflict but leaves some missing references like the "Composition"
reference above. I was able to get past that by adding System.ComponentModel.Composition. This is after installing the VS 2013 update 4 build.
Now I get the following. I'm concerned that I'm taking references from both Lightswitch and Silverlight
sdk's just to get it to build. These references are required because of the auto generated code. I must have something quirked. Anyway what about System.Data.Common.DbConnection? How can I get it without
referencing System.Data?
Error 2
The type 'System.Data.Common.DbConnection' is defined in an assembly that is not referenced. You must add a reference to assembly 'System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
C:\Source\splat\Splat.Spac\Spac\Spac.Server\GeneratedArtifacts\ApplicationDataObjectContext.cs
50 16
Spac.Server
Scott Mitchell

Difference between Installing an application and Deploying and application

What is the Difference between Installing an application and Deploying and application from the console?
When deploying and app from console - > Click on deployments -> Install -> choose app path, next, next,.. Finish.
Then it will be in prepared state. Once you activate changes, the app deployed will be in activate state. Some times even if you activate changes, it will be in prepared state. then you need to start the app which then comes to activate state.
From above, which part is called Installing an app? Which part is called deploying an app?
Or Are Install and Deploy both mean same?
Edited by: user734247 on Apr 26, 2012 3:16 PM

Installation is generally referred to making an application's physical file or directory known/accessible to WebLogic Server by configuring through the "New" option in the "Deployments" screen and targeting the servers. Installation of an application will put the status of the application in "prepared" state.
Start is the next action expected so that the application's state transforms into "ACTIVE" by initializing the application and loading the necessary classes and creating the necessary objects to run the application.
The above two steps together are referred to as "Deployment of an application"
Bottomline: In short, "Deploying an application" includes "Installation of the application" AND "Activation/Start of the application"
Arun

Conflict between Client object model and Item Updated Event Receiver in sharepoint 2010

Hello All,
As per my requirement I have a two custom list.
Agent Details
Port Name
Agent Details contains Agent code, Port Name, email, address and phone of Agent. Its possible that one Agent Code is connected with multiple Port Name.
Basically what I am doing is I am getting port name connected with Agent code, using jquery and bind those values with check box(using javascript created dynamically) and bind all with Div tag.
Now when my custom edit form of Agent list open up it shows me different port name binding with checkbox group.
when user select the check box and click confirm button my clicent object model script will run and add this selected value into Port Name list.
After confirm one more button named Save will enable asking user to edit the email, phone or address value and when I click on save my Item updated event fires which update the values of the selected port name(These port name I am getting from port
name list) to Agent Details custom list.
Now when I am trying to update the values my event receiver fires or some times it got stuck(not firing). So could you please help me the possible alternative for this requirements.
Can we user the Ecma Script(Client object model to preserve the value of selectec port) and Item updated event receiver on the same time?
Is anything am doing wrong then please guide me.

Hi,
As I understand, when you updated values in the agent details list the Item updated event receiver got stuck sometimes.
The item update event receiver will fire after the item has been saved, and the client object model script or the Ecma Script runs before the item is saved, so there is no conflict between the client object model script and item update event receiver.
You could find out the reason about the item update event receiver gets stuck by debugging the event receiver.
When you want to debug your event receivers, you have to attach to OWSTIMER.EXE and wait till they are executed. You can control this behavior using the Synchronization attribute. Also, if you’re looking for an easy way to debug an event receiver without
having to manually attach a debugger to your code, you can use the System.Diagnostics.Debugger.Launch() method.
The articles below are about how to debug in the event receiver in SharePoint 2010.
http://sharepoint-kings.blogspot.jp/2013/02/debugging-event-receivers-in-sharepoint.html
http://chakkaradeep.com/index.php/event-receivers-in-sharepoint-2010/
http://sharesaint.com/?p=77
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Interaction between Actionscript 2 application and Actionscript 3 application

Hi,
I got a project to refectoring. Its coded in as2. As One application (TabManager) has 5-6 tabs, and loading different swfs (coded in as2) at click on different tabs. Then according to user interactions, the loaded swfs are interacting with tabmanager (main swf) file like calling functions and sending objects and tabManager swf is also interacting with its loaded swfs. In short, All swfs are interacting each other.
Now, I have to develop two application, one is the main application "TabManager" and other one is 3rd (one application out of 5-6 applications, whose are loading in tabmanager) loaded application in tabManager.
To make the long story short, I need to load action script 2 coded applications under a action script 3 application and need to call each other function and send object type data.
So, please suggest the best options, One I know is LocalConnection class.
Is there any other better way to interact between as2 and as3.

there is no other way to communicate between as3/as2 swfs in real time.

I have a conflict between Firefox Version 5 and both Ebay and Fasthost Sitebuilder image uploads.

Since upgrading to version 5 of Firefox subscreens of ebay are not displaying, Fasthost Sitebuilder has stopped allowing the import of pictures and I am being logged out of secure sites before transactions are completed.

I encounter immediate problems on installing Firefox 5. There were 3 Windows 7 crashes and I could not access Firefox. It was determined that there was a conflict between the anti virus program and the 5 version. There is no download for the older version 4 was not available. After trying several fixes, nothing worked.
One post indicated that Mozilla was not fixing Firefox 5 and that the fixes were made in Firefox 6 version. Reluctantly, I upgraded to six and , to my amazement, it works again. Nothing ventured, nothing gained!! Hope it works for you.

Conflict between the saved data and the sampling rate and samples to read using PXI 6070e

Hello, I am using PXI 6070e to read an analog voltage. I was sampling at 6.6 MHz and the samples to read were 10. So, that means it should sample 10 points every 1.5 um. The x-axis of the graph on the control panel was showing ns and us scale, which I think because of the fast sampling and acquiring data. I use "write to measurement file" block to save the data. However, the data was saved every 0.4 second and as 35 points data at the beginning of each cycle (e.g. 35 points at 0.4 sec and 35 at 0.8 sec, and so on) and there was no data in between. Can anyone help me how there are 35 reading points every cycle? I could not find the relation between the sampling rate and samples to read, to 35 points every 0.4 second!
Another thing, do I need to add a filter after acquiring the data (after the DAQ assistant block)? Is there anti-aliasing filter is built in PXI 6070e?
Thanks for the help in advance,
Alaeddin

I'm not seeing anything that points to this issue. Your DAQ is set to continuous acquire. I'm not sure if this is really what you want because your DAQ buffer will keep overwriting. You probably just want to set to Read N Samples.
I'm not a fan of using the express VIs. And since you are writing to a TDMS file, I would use the Stream to TDMS option in DAQmx. If you use the LabVIEW Example Finder, search for "TDMS Log" for a list of some good examples.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Qosmio G30: Conflict between Sigmatel audio driver and Vista SP1

Hello,
I have a Qosmio G30 PQG32E notebook and can't upgrade to Vista SP1 because the Sigmatel driver (6.10.5462.0) is conflicting with the service pack.
As some of you might know, Sigmatel no longer exists and IDT who bought them is as good as non-existent, saying to contact the OEM directly for updated drivers.
Is there any plan to upgrade the audio driver ?
There are huge memory leaks in my case from the audio driver.
When using Photoshop or Premiere Pro, the audiodg.exe proccess consumes 800MB and more after one hour of continuous work.
I am hoping for an updated more stable driver, and more stability from SP1.
Am I a dreamer?

Have your problems started after SP1 installation? Just for info: at the moment Toshiba does not support SP1. I really believe that you have some troubles and because of that I still wait with SP1 installation.
You are right about Qosmio. It costs a lot of money but using delivered recovery image installation you will not have any problem. About memory and how much resources Vista needs you can read everywhere. Even if you close some application RAM will still be occupied with different information. If you start the same application again you will see that application starts second time much faster.
It is Vista!!!
You have really nice notebook and you should upgrade RAM to maximum level. I am pretty the notebook will runs much better and of course faster. For such notebook 2 GB for Vista is really the minimum.

Version conflict between XE's ODP and VS2005/ODT's ODP

Suppose you've just built an application with VS2005, .NET Framework 2.0, and Oracle Developer Tools for Visual Studio .NET with Oracle10g Release 2 ODAC 10.2.0.2.20 which uses Oracle.DataAccess.dll version 2.102.2.20. You want to be able to run the application on a client machine that has an Oracle XE database installed locally. Perhaps you even require that the client machine runs the Oracle XE Client. Unfortunately, even with both there seems to be a version conflict regarding Oracle.DataAccess.dll. Can anyone say what are the best practices for such a situation?

Situation:
1) Oracle XE (database with/without client) installs with the following two files in the <ORACLEXE_SERVER_HOME>/BIN directory:
Oracle.DataAccess.dll v10.2.0.100 (for .NET Framework 1.0)
OraOps10.dll v10.2.0.100 (for .NET Framework 1.0)
2) Applications built with VS2005, .NET Framework 2.0, and Oracle Developer Tools for Visual Studio .NET with Oracle10g Release 2 ODAC 10.2.0.2.20 use Oracle.DataAccess.dll v2.102.2.20 (for .NET Framework 2.0).
3) The client machine will be missing the following two files vital to the application: Oracle.DataAccess.dll v2.102.2.20 (for .NET Framework 2.0), OraOps10w.dll v2.102.2.20 (for .NET Framework 2.0). These two files can be found on the development machine in the <ORACLE_ODAC HOME>/odp.net/bin/2.x and <ORACLEODAC _HOME>/bin directories, respectively.
Action:
When installing the application on the client's machine, place copies of the two missing files into the client's <ORACLEXE_SERVER_HOME>/BIN directory, overwriting the existing Oracle.DataAccess.dll v10.2.0.100 (for .NET Framework 1.0).
Result:
The application performs as expected.
My immediate concern is that the client may object to replacing the existing Oracle.DataAccess.dll v10.2.0.100 (for .NET Framework 1.0). What are the best practices for such a situation?

SSO between custom C++ application and web browser

Hello.
I have a bit of problems figuring out how to do SSO functionality between a Browser and a custom client (custom protocol over HTTP).
I want it to work as follows: If the user logs in in the HTTP client, the user is already logged in in the custom client, and vice versa.
I thought this could be implemented my reading and writing cookie values from the browser in my custom client, but it seems like the cookies set are all without expiration. IE handles these cookies private in a process, and so I can't get a hold of it.
How do I implement SSO between clients if I can't base it on cookie values?
Regards
Kyrre.

Any comment?

Workspace Credential Conflict between Logged-in User and the Authenticated User

Hi there,
I am running LiveCycle ES Update1 SP2 with Process Management component on WIN/JBoss/SQL Server 2005.
I have been encountering user credential conflicts from time to time, but it has not been consistent and the problem manifested in various ways, such as:
- problem when logging in with error "An error occurred retrieving tasks." on the login screen
- user logs in successfully but is showing somebody else queue(s) with his/her own queue with no task in there
- fails to claim task from group queue.
The stacktrace from the server.log file I collected from a production system shows the exception below.
Has anybody else encountered the similar problem?
It looks to me that it doesn't log out cleanly and some kind of caching is done on the authenticated session and is not cleaned up properly on user logout.
2009-07-10 15:05:13,955 ERROR [com.adobe.workspace.AssemblerUtility] ALC-WKS-005-008: Security exception: the user specified in the fill parameters (oid=F0FA390C-AECC-BB19-F0D7-6CA13D6CBF83) did not match the authenticated user (oid=F25892EE-80CE-8C24-E40D-881F631AA8BE).
2009-07-10 15:05:13,955 INFO [STDOUT] [LCDS] [ERROR] Exception when invoking service 'remoting-service': flex.messaging.MessageException: ALC-WKS-005-008: Security exception: the user specified in the fill parameters (oid=F0FA390C-AECC-BB19-F0D7-6CA13D6CBF83) did not match the authenticated user (oid=F25892EE-80CE-8C24-E40D-881F631AA8BE).
incomingMessage: Flex Message (flex.messaging.messages.RemotingMessage)
    operation = submitWithData
    clientId = F3D2CDD0-330F-F00B-C710-5AF3F7CB4138
    destination = task-actions
    messageId = 7E385A6B-E4E6-3A81-CD6A-630DF4FAE5BB
    timestamp = 1247202313955
    timeToLive = 0
    body = null
    hdr(DSEndpoint) = workspace-polling-amf
    hdr(DSId) = F3C38977-171B-7BED-3B16-F3A5FE419479
Exception: flex.messaging.MessageException: ALC-WKS-005-008: Security exception: the user specified in the fill parameters (oid=F0FA390C-AECC-BB19-F0D7-6CA13D6CBF83) did not match the authenticated user (oid=F25892EE-80CE-8C24-E40D-881F631AA8BE).
    at com.adobe.workspace.AssemblerUtility.createMessageException(AssemblerUtility.java:369)
    at com.adobe.workspace.AssemblerUtility.checkParameters(AssemblerUtility.java:561)
    at com.adobe.workspace.tasks.TaskActions.callSubmitService(TaskActions.java:788)
    at com.adobe.workspace.tasks.TaskActions.submitWithData(TaskActions.java:773)
    at sun.reflect.GeneratedMethodAccessor941.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at flex.messaging.services.remoting.adapters.JavaAdapter.invoke(JavaAdapter.java:421)
    at flex.messaging.services.RemotingService.serviceMessage(RemotingService.java:183)
    at flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1495)
    at flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndpoint.java:882)
    at flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBrokerFilter.java:121)
    at flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:158)
    at flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:44)
    at flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFilter.java:67)
    at flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:146)
    at flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:278)
    at flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:315)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:252)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    at com.adobe.workspace.events.RemoteEventClientLifeCycle.doFilter(RemoteEventClientLifeCycle .java:138)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:202)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:202)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
    at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39)
    at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.ja va:159)
    at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11P rotocol.java:744)
    at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
    at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
    at java.lang.Thread.run(Thread.java:595)
Kendy

I am having the same server issue and i cant get hold of SP3 to fix it. can anyone tell me how to fix this problem or provided a link where i can get SP3 from? Ive spent most of the day on the phone to Adobe Support and they have been unable to provide me with a link to the service pack.

Conflict between Articulate Engage swf and Quiz Manager

I am inserting an articulate engage swf into my Breeze presentation and my Presenter quiz questions do not work correctly after inserting the engage swf.
My process has been to publish the engage swf which also publishes a content folder....Then I insert the engage swf into the powerpoint presentation....Then publish the presentation locally with Presenter. I then have to add the engage content folder to the Presenter output folder structure in data > resources.
My slide presentation also has Adobe Quiz Manager questions in it. THe problem i am having is the quiz questions will not advance with the engage swf in the presentation. The kicker is, the quiz questions will work if they are on slides that come before any slide with engage content on it. for example if there are a couple of quiz questions in my presentation and the first one is on slide 5 followed by an engage swf on slide 6, this first quiz question will work. If the next quiz question is on slide 7 it will not advance after the user answers the question. If i skip the slide with the engage content (by going from slide 5 to 7) the 2nd quiz question will work just fine. It seems that loading the engage swf causes a problem for the quiz questions that come after it .
Has anyone had this type of problem?
thanks in advance. - Mike

Hi Mike!
I actually ran into a problem similar to what you've written about here.
Here's a suggestion to try; you may experience weird / unexpected results, but it may be worth a try....and who knows, it could help!
Here goes:
Rather than using one quiz container for your content / course, what I'd like you to do is break up "non-contiguous" question slides into totally separate quiz containers. I think what you need to avoid is having any kind of flash interactions from Engage running between a set of question slides stemming from one quiz container.
So instead of having a question on slide 5, an Engage interaction on slide 6 and another question on slide 7.....I want you to try breaking that up so that it looks like this:
Question on slide 5 [from quiz container 1], Engage interaction, question on slide 7 [from quiz container 2]...and so on.
Here's the deal: I've personally seen instances where adding custom Flash animations between question slides have caused some interference with the functionality of question slides. Even though you're using a totally different product, Engage still employs code parameters that can cause some breakdowns as soon as you publish your Adobe Presenter content, and I think that's what's happening here. To be brutally honest, I don't have Engage, but I'd be willing to bet it's causing the same problems that I've encountered with Flash animations that I've tried to incorporate into my Presenter content.
So again, try breaking up the question slides into separate, independant quiz containers and see if that resolves the problem....I'd be curious to know if that works!
Rob
http://www.robrode.com/yabb/

Comunication between Fusion Web applications and BPM applications.

I have made some Fusion Web Application.
After that I have created small BPM Application with simple BPMN process.
I am sure, there is a way to send event message from ADF to BPM. But I can't find it.
In BPM I created Catch Message event flow object and made implimentation for it (Type: Define Interface, 1 argument of simple tipe String and some Data assosiations).
In Fusion Web Application I made small project with 1 small form.
How can I just click on the button to send message?

Can you explain your scenario in a little more detail -
What kind of event messages do you exactly need to send ?

Inegration between an ADF application and OAM

hi
my question here is how to integrate my ADF application with Oracle access manager (which build his own SSO login page ) and take the user from it.
please provide me wit any link that may help
appreciate any help

Hi,
JAZN has a OAM LoginModule that you can configure for authentication. This then enables container managed J2EE authentication to work with OAM
Frank

Conflict between distribution of applications and autostart

Similar Messages

Maybe you are looking for