Conflict between ITunes 6.01 and Quicktime 7.03?

Hi:
I upgraded today to Quicktime 7.03, and to ITunes 6.01 and now neither application launches. I've tried reinstalling and rebooting and nothing works.
I've had to force-quit to get out of both of them.
Any suggestions?

I upgraded to iTunes 6.01 and to QT 7.03. Both apps launch but when I quit iTunes, I get a crash report saying the WindowServer "unexpectedly crashed". I have had a similar crash report after quitting QT as well.

Similar Messages

How can I resolve conflict between itunes and Windows 8.1

When downloading itunes to my laptop computer, using Windows 8.1 my email/network account will not work on that computer. It is fine on other devices such as ipad and Windows phone. I can also pick up emails on online on the same laptop. There appears to be a conflict between itunes and Windows 8.1

Please see Boot Camp for comments.

How to revert to iTunes 4.9 and QuickTime 7

Hello all
I used the Automatic Software Update yesterday and downloaded iTunes 5.0 and QuickTime 7.0.2 and now not a single program will work on my iMac G5 (using 10.3.9)!!!
I know there are other posts related to iTunes 5.0, but I can seem to find an answer to these questions:
Is there a way to revert back to the old versions?
Any one have advice on how to solve this problem?
Thank you.

Interesting.
Normally, if you have corrupt preferences of your 'third-party' (non-Apple) applications, they would have no effect on computer startup issues, as those preferences are not looked at until the program which owns them is invoked. Though perhaps this issue is with some of the Finder and Apple OS preferences being corrupted, which could cause problems with startup.
FYI, Crashes of a program may indeed corrupt its own preferences, and sometimes its own data files too. As your experience with Mail corrupting its own preferences, and Carrie Ann's with their tech move-the-Mail-folder recommendation shows.
But if the crashing or other bad behavior of the Apple applications (Mail, QT or iTunes) is writing bad data onto other, non-Apple programs' preference files, that would be extemely unusual program behavior. (The Mac OS was designed to protect memory, and be less likely to 'hose' other data...)
As you note, Bster, I do see that Apple has just posted a QuickTime (QT) 702 to 701 downgrader file. THis is highly irregular -- not sure what is happening with their Quality Assurance (QA) process these days...
But it does imply that they know something is not quite right with QT 702 and its interactions with other programs.
As a counterpoint note, I am running QT 7.0.2 on my iMac G5 and have not experienced any trouble with it. (I haven't noticed any particular or big improvement with the 702 over the 701 either.) The difference may be that I have stayed at iTunes 4.x and did not upgrade it to 5.0 (actually, my iTunes is 4.7.1 - a few versions behind). And I do not use Apple Mail application (I use the MS Entourage for email - though it is not a perfect solution either).
As well, regarding my setup, I always run repair permissions both before and after any of my significant Apple software updates, and I usually seem to encounter fewer sotware install problems than get reported in the forums.
(I mention this just to illustrate that sometimes software problems arise not due solely to an application or application update itself, but because it was installed onto a machine that had a few minor disk errors or permission errors existing on it before/during the update process. I hope this makes sense.)
Thus the general recommendation to always repair disk and repair permissions both before and after significant OS and application updates. And to not run other memory or disk intensive programs at the same time you are running the update.
So based on my personal computer setup, which so far is running fine with QT 702, it might imply a strange set of interactions between QT 702, iTunes 5 and possibly Mail -- but this is just a guess. It is a very curious situation that has come up with this.
One general recommendation: when you are on the tech support call, ask them to explain WHY a particular action is being recommended, and what it's other effects might be. This to increase your own understanding of the process, and to alert them that you are a wise user, so that they do not issue overly simplified procedures. Empower The User. ;^)
Best. BY

Conflict between program Mac mail and program Microsoft Outlook e-mail???

Denmark, Kolding, 30th of September 2010
A conflict between program Mac mail and program Microsoft Outlook e-mail?
For several months tried to discuss and resolve with several Apple specialists/support, but without much luck.
Therefore I have discussed these issues with 2 different and independent Mac users to find out in testing other Mac users will have the same problems as outlined in the below mentioned situations.
I will therefore outline the coverage issues, as mentioned, including occurs on my iMac 21.5 " with serial number: <Edited by Host> and 2 friends with their Macbooks of new dates as follows:
1. Sending from my Mac plain mail as "plain text "(during formatting):
Plain text mail as "Plain Text "(during formatting) Verdana font size 10, sent and received on Windows PC with the correct letter size - but with the font changed to Century Gothic!!!
2. Sending from my Mac plain mail "formatted text" (during formatting):
Eg. with my signature/signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text dispatched - the mail received as text with New Times Roman size 12 and signing /signature color Verdana now in size 13.5!!!!
3. Sending plain mail "as normal text "(during formatting)
In the mail text underlined and made bold - the program asks whether to convert to RTF format (to keep underlining, bold, etc.) and Verdana as font and size 10, YES - this mail is received on the Windows PC as text with New Times Roman with the desired underlining and bold text and size 12!!!!
4. Plain text mail as "formatted Text"
Eg. with signature / signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text sent - received as text with New Times Roman and signing / signature as colored Verdana now in size 13.5!!!
5. Sending mail with file attached:
After producing a normal text document modified to PDF and directly from the Adobe Reader sent this PDF file in e-mail formatted as normal text with font Verdana 10 point, with signature. This is received on the Windows PC with a PDF file OK, but the font of the mail text is changed to Century Gothic and missing signature. Signature is available as an attachment on the Windows Outlook e-mail program as a ATT00113.text file. This can be opened and there is the missing signature!
6. Sending e-mail with photos directly from iPhoto
iPhoto opens and click on the desired photos eg. 5 pcs. (Exactly as mentioned in the demo video!) and click on the e-mail icon at iPhoto and the program opens and e-mail that is opened with the attached photos and rich text is being used in the mail. Signature disappears and must be clicked on the mail by the sender.
The mail is received with the attached pictures OK - text changed to Times Roman with the desired bold - though no signature and 5 pcs. Att0028.html files attached. These can be opened and contains the file number each picture!
The above problems can be partly avoided by the following:
1. Only send mails as plain text
Without any underlining, attachments, etc.. When the Windows PC Outlook receiver opens the mail where only the text fond is changed!!
2. Sending mail with attached file
Start opening the mail program and use formatted plain text first and then attach (with the staple) file, and the Window receiver will get the file, but text and signature changed to Times New Roman size 13!!
3. Sending mail with photos from iPhoto
Start by opening mail program text in Verdana 10 and click the Photo Browser and find (look for - takes its time!) the pictures you want to send and pull/drag them into the mail and send, - images, text and signature are in the mail on Windows PC - but with the font changed to Century Gothic!!!
If sent as formatted text with various underlining, italics, etc. together with the photos will be received OK - but the writing is now New Times Roman size 12 signatures Verdana now in size 13!!!
I must say – I am disappointed with the Mac mail program – it actually means that sending a perfect mail with underlining, colours, a.s.o. also photos directly from iPhoto – will received at a Windows computer in a totally mess.
Looking forward to some good news from either Mac supporter or some clever Mac users who can help me to adjust my Mac to avoid these problems IF POSSIBLE!!!!.
Apple/Mac is too good a product to make these problems!!
Best regards
Peter Larsen
<Edited by Host>

Welcome to Apple Discussions!
The PC sets the font on its side, the Mac does on its side for plain text. There is no "font size" in plain text coding. Rich Text gives you a bit more control, but only if both e-mail clients support it. HTML gives you a bit more control, but only if both e-mail clients support it. Use the asterisk, parenthesis, underscore, or any keyboard symbol that is part of the original ASCII. Otherwise, the chance is nobody else will be able to read it who does not have your e-mail client in the same version.
Sadly there are no e-mail standards except MIME for attachment, and even that isn't universally supported. E-mail is not the ideal medium for anything except plain text that is ASCII. To learn more about ASCII, see:
http://en.wikipedia.org/wiki/ASCII
If you want to post a website that is universally understood, see the hints here:
http://www.anybrowser.org/

No Synchronisation of Photos between iTunes 10.5 and iPhone 3GS after iOS 5

I made the Update to iTunes 10.5 on my Notebook with Windows XP and the Update to iOS 5 on my iPhone 3GS.
I had a lot of Problems (the Backup had an Error, my outgoing Mails were all deleted in all Mail Accounts, the Synchronisation of Music and Apps needs a lot of Synchronisations and a lot of Time and so on) with these Updates and I need more than 12 Hours at the Moment to repair all the Errors.
My last Problem is:
There is no Synchronisation of Photos between iTunes 10.5 and iPhone with iOS 5.
I can not see my Photos in my iPhone.
The Capacity in iTunes 10.5 shows 4,4 GB Fotos on my iPhone, but in my iPhone, there is no Folder in the Photo App and so I can not see the 4,4 GB of my Photos.
This Problem comes with iOS 5. I had this Problem never before.
First, I gave in iTunes a OK for a Home Sharing of Music, Videos, Photos and so on for the Folders and for the iPhone.
Second, I was in iTunes in Photos and deleted the Check in the Folder Photos.
Third, I made a Synchronisation with iTunes and the iPhone.
Fourth, the Capacity of the Photos was then only at 0,17 GB.
Fifth, I close iTunes and switched off the iPhone.
Sixth, I started iTunes and iPhone new and bring both together with the USB-Port.
Seventh, the Syncronisation started and the Capacity of the Photos in iTunes was at 0,17 GB, too.
Eigth, I set a new Check in the Folder Photos in iTunes for a Synchronisation.
Ninth, the Capacity showed 4,4 GB again.
Tenth, the Synchronisation started and showed on the Display "2 Photos of 16.000".
Eleventh, the Synchronisation Circle stopped after 10 Seconds, but the Notebook worked 2 Minutes longer.
And after this the Synchronisation stopped appruptely / crashed (?) and the Photos are "unvisible" on the iPhone.
Is this a known Bug?
Has Someone a Solution for a correct Synchronisation of the Photos, so that I can see successfully my Photos in my iPhone again?
Thank you very much for your Help!

Ever since my upgrade to iTunes 10.5 my laptop has been crashing. I've heard that the update ***** up 100% of your CPU, essentially crashing your computer. Apple, fix this now!!!

Disable altivec extensions for iTunes 1.1 and Quicktime 6.0.5 in OS 8.6 ?

For kicks and giggles I'm trying to get an install of OS 8.6 working as well as it can on a G3 B&W again, just because it looks so cute. Not surprisingly the big stumbling block was getting a browser with somewhat acceptable usability (am using both netscape 7.0.2 and mozilla 1.3.1)
I've installed both iTunes 1.1 and Quicktime 6.0.5 but I can only get them to work when i have a G3 450 Mhz CPU installed. As soon as I put in a G4 650 CPU the system either locks up while loading those little puzzle pieces across the bottom, or whenever i try to open quicktime (or a browser tries to access it to play content).
I installed OS 8.6 while running the G4 and other than these 2 applications it runs quiet snappy.
It seems to me that the two apps in question only cause a crash while trying to access the altivec capabilities of the G4 CPU which I understand is not possible inside of OS 8.6.
Is there some way to turn off those requests, either at the application level or globally?
I am hoping that it is as easy as tossing one of those little puzzle pieces in the trash.
I'm trying to get 4 systems on one 20 gig backup drive (onboard IDE channel 8.6 / 9.2.2 / 10.3 / 10.4 separate partitions) all using the same hardware.
Any suggestions?

I think i figured it out. I installed OS 8.6 with an applecare disk that was for the original G3 blue and white, and i see that a different version of 8.6 shipped with a G4 PCI power mac which i suppose is the disk i need.
Am i on the right track? and is this fixable?

Conflict between refeneces in Lightswitch\ and Silverlight\ after update to Visual Studio 2013 12.0.40302.00 and SQL Server Data Tools 12.0.50226.0

After updating VS and SSDT there began a conflict with references in two directories under the SDKs folder (Lightswitch and Silverlight):
Error 91
The type 'System.Data.Services.Client.DataServiceCollection<T>' exists in both '
...\Microsoft SDKs\LightSwitch\v4.5\Client\Microsoft.Data.Services.Client.SL.dll' and 'both '
...\Microsoft SDKs\Silverlight\v5.0\Libraries\Client\System.Data.Services.Client.dll'
...\SPDCDataObjectContext.cs 1478
52 Spac.DesktopClient
I thought since the Lightswitch directory was newer that I would comment out the Silverlight directory and see how far that would get me. Now I get:
Error 16
The type or namespace name 'Composition' does not exist in the namespace 'System.ComponentModel' (are you missing an assembly reference?)
...\Spac.DesktopClient\GeneratedArtifacts\ApplicationGenerated.cs
13 36
Spac.DesktopClient
How do I handle the original conflict between refeneces in Lightswitch\ and Silverlight\ ?
Scott Mitchell

Thank you. Yes that resolves the conflict but leaves some missing references like the "Composition"
reference above. I was able to get past that by adding System.ComponentModel.Composition. This is after installing the VS 2013 update 4 build.
Now I get the following. I'm concerned that I'm taking references from both Lightswitch and Silverlight
sdk's just to get it to build. These references are required because of the auto generated code. I must have something quirked. Anyway what about System.Data.Common.DbConnection? How can I get it without
referencing System.Data?
Error 2
The type 'System.Data.Common.DbConnection' is defined in an assembly that is not referenced. You must add a reference to assembly 'System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
C:\Source\splat\Splat.Spac\Spac\Spac.Server\GeneratedArtifacts\ApplicationDataObjectContext.cs
50 16
Spac.Server
Scott Mitchell

Installing itunes 7.6 and quicktime

help - I have repeatedly tried to install itunes 7.6 and quicktime both individually and together. I repeatedly get an error message which says 'error creating directory QTsystem\Quicktime3GPP.Resources\ja.lproj' - I then get ererr 2330 and then I only get an option to quit the installation process which I have to click which then rolls back the process and installation is aborted.
I have itunes 7.2 and cannot buy anything from the itunes store as it requires itunes 7.6.
I have gone through the troubleshoot page in apple - done the msconfig steps etc and nothing has resolved. Have now deleted quicktime so unable to install again as the same error happens. tried deleting itunes 7.2 but don't want to fully delete evryting as I will lose all my libraries. Have installed latest windows service pack 3 and this hasn't resolved the issue. My computer is XP Home.
Any help to resolve this gratefully received.

I repeatedly get an error message which says 'error creating directory QTsystem\Quicktime3GPP.Resources\ja.lproj' - I then get ererr 2330 and then I only get an option to quit the installation process which I have to click which then rolls back the process and installation is aborted.
2330s are most commonly associated with damage to program files (in your case it looks like something in one of the Japanese language localisation resources for your QuickTime).
Try running a chkdsk over the drive containing that directory. (Usually it's the C drive, but if you've got your QuickTime program files installed on a different drive, try running the chkdsk over that one.)
How to perform disk error checking in Windows XP
Does the chkdsk find/repair any damage? If so, does an install go through properly afterwards?

Airport Hardware Dissappeared - After iTunes 7.0 and QuickTime 7.1.3

Hello,
On my powerbook G4, everything has been working great. I did a software update (via wireless connection) and iTunes 7.0 and QuickTime 7.1.3 were prompted. I went ahead with the update and performed the obligitory restart. After this reboot, the airport card hardware is no longer recognized.
In the log file during initiation when an internet connection is attempted, the following message occurs:
Internet Connect: WirelessAirPortDeviceNameCopy(): no AirPort drive found
I have tried many restarts (including a hard restart). I have reset the PRAM, and NVRAM but still nothing. This to me appears to be very much a software issue due to the circumstances. Are there any suggestions on how I may reinstall the airport driver or determine if there is a configuration problem?
Thanks in advance for any help.
PowerBook G4 15" 1.5Ghz 1.5GB RAM Mac OS X (10.4.7) Built in Airport Card

I don't think this is an isolate issue, as I'm having the same problem. After the update my computer is now saying "Airport hardware not found" although I've been using it for almost 2 years now. I fixed it briefly by dragging some folder to the desktop as per advice on this site, but today it did the same thing. I was watching videos on MTV.com when an alert came up saying "Error, you need to restart your computer" and after I did my Airport hardware was "not found" again. Since I haven't dropped the computer and I wouldn't know how to take the card out if I wanted to, I don't think it's a simple issue of the card not being installed/connected properly. I'm open to any suggestions. I have the original disks that came with my computer, but I can't reinstall the software b/c the old software is still on there....

Differences between iTunes Gift Card and iTunes Apps Card

Hi,
this is my question: what are the differences between iTunes Gift Card and iTunes Apps Card?
thank You!

what are the differences between iTunes Gift Card and iTunes Apps Card?
The only difference is the picture on the front.
You can use either for anything in the iTunes store.

Conflict between iTunes Match and Windows 8.1

I have been running iTunes on my fully updated Windows 8.1 PC for some time, without any particular issues. A few days ago, I activated iTunes match. It worked just fine, in the perspective of my iPhone and iPad. However, my PC stopped being responsive: Long time-outs on just about anything, and dialog windows refusing to appear (one of them being the McAfee console ....). A virus search using Microsoft's emergency services showed nothing.
The moment I de-activated iTunes match, everyhing reverted to normal.
My conclusion is, there is a major conflict between whatever the iTunes match service does, and the Windows 8.1 operating system.
Any idea what this is all about, and if there is anything I can do about it (except avoiding using the match functionality)?
I have the latest update of iTunes for PC.

Hi lars1950,
Welcome to Apple Support Communities.
It sounds like you're seeing issues with Windows responding slowly since enabling iTunes Match. The article below may resolve the issue for you, it describes possible conflicts with Layered Service Providers and how to prevent them.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
I hope this helps.
-Jason

Conflict between Client object model and Item Updated Event Receiver in sharepoint 2010

Hello All,
As per my requirement I have a two custom list.
Agent Details
Port Name
Agent Details contains Agent code, Port Name, email, address and phone of Agent. Its possible that one Agent Code is connected with multiple Port Name.
Basically what I am doing is I am getting port name connected with Agent code, using jquery and bind those values with check box(using javascript created dynamically) and bind all with Div tag.
Now when my custom edit form of Agent list open up it shows me different port name binding with checkbox group.
when user select the check box and click confirm button my clicent object model script will run and add this selected value into Port Name list.
After confirm one more button named Save will enable asking user to edit the email, phone or address value and when I click on save my Item updated event fires which update the values of the selected port name(These port name I am getting from port
name list) to Agent Details custom list.
Now when I am trying to update the values my event receiver fires or some times it got stuck(not firing). So could you please help me the possible alternative for this requirements.
Can we user the Ecma Script(Client object model to preserve the value of selectec port) and Item updated event receiver on the same time?
Is anything am doing wrong then please guide me.

Hi,
As I understand, when you updated values in the agent details list the Item updated event receiver got stuck sometimes.
The item update event receiver will fire after the item has been saved, and the client object model script or the Ecma Script runs before the item is saved, so there is no conflict between the client object model script and item update event receiver.
You could find out the reason about the item update event receiver gets stuck by debugging the event receiver.
When you want to debug your event receivers, you have to attach to OWSTIMER.EXE and wait till they are executed. You can control this behavior using the Synchronization attribute. Also, if you’re looking for an easy way to debug an event receiver without
having to manually attach a debugger to your code, you can use the System.Diagnostics.Debugger.Launch() method.
The articles below are about how to debug in the event receiver in SharePoint 2010.
http://sharepoint-kings.blogspot.jp/2013/02/debugging-event-receivers-in-sharepoint.html
http://chakkaradeep.com/index.php/event-receivers-in-sharepoint-2010/
http://sharesaint.com/?p=77
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

ITunes Error -3 and QuickTime Error 1722

Help!
I'm at the end of my tether here, I've been trying to install iTunes 6.0 on Windows XP SP2 and getting the error -3. So, I tried the standalone Quicktime installer as recommended on this forum and I get the 1722 error.
I've followed all the recommendations for fixing the 1722 error:
- I've uninstalled iTunes & all versions of Quicktime
- I've stopped all Anti-Virus/Anti-Spyware software
- I have full admin rights to the machine
- I've updated my Windows Installer
- I've run the Windows Installation Clean-Up Utility
- I've hacked the registry to death giving permissions to anything vaguely associated with Apple
- Ditto for permissions for the WINDOWS\Registration folder and the Program Files\Apple folder and the folder I'm installing from.
- I've stopped nearly every service I can and uninstalled just about everything that's non-essential
Are all Apple's updates so difficult to get working for Windows users? Should I just go back to the version of iTunes I got with my iPod and forget about updates or perhaps it's a cunning ploy to get me to buy a Mac?
Please, please help! I'm sick of this.
Thanks.

I tried the standalone Quicktime installer as recommended on this forum and I get the 1722 error
good lord, psifive ... are we talking: "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected." here?
that's an extremely unusual and exotic error message to be getting in this context.
let's proceed fairly cautiously, and start with something minimally aggressive. try
b method 1
from the following document:
http://support.microsoft.com/default.aspx?scid=kb;en-us;555175
does the standalone go through now?
love, b

ITunes 6 Upgrade and QuickTime

Every time I try to install iTunes 6 I get an error message for QuickTime.
QuickTime Installation failed:
Error Code: -3
What does this mean and how can I fix it? It won't let me use iTunes now since I can't get QuickTime to install and that means I won't be able to update or charge my iPod. I live on that thing. Please help me. It's driving me crazy.

Hey troubled Podheads,
I was one of the legion with problems in downloading iTunes6 and QT7 for Windows until I tried something (I must say that I am not a pc wizard and I don't know the technical reasons for why the following worked, it just did! So if there are any pc geeks out there, be sure to chime in). Anyway, this is what I did. First uninstall QuickTime if you do have it on your pc. If not, just go to the next step:
Go to START, then RUN. Type in regedit and then click OK. Your REGISTRY EDITOR should open. You should see HKEYLOCALMACHINE in the scroll down menu on the left, with a small box to its left. Make sure that the inside of the box has a negative sign - this will open up the next set of subfolders. Next, make sure that the subfolder, SOFTWARE, has a negative sign in the small box to its left. Next, make sure that there is a negative sign in the box next to the subfolder entitled, Apple Computer, Inc. You'll see at least three subfolders: iPod, iTunes and QuickTime. Click once on the QuickTime folder until it is highlighted and then delete it. You will be asked if you want to delete QuickTime and its subfolders. Click ok and then close out the Registry Editor.
Next, download the stand alone QuickTime 7 at this link (you may have to cut and paste this link to open this website):
http://www.apple.com/quicktime/download/standalone.html
When you download the stand alone QT7, you may get a couple of error messages (I did), but if you repeatedly click ok (like I did), the QT7 player should load with no problems.
Again, I am no pc geek, but this worked for me and I have gained access to iTunes6 (with video capacity) and my complete library is intact. Nothing like trial and error!! Good luck -- I hope this works for all of you frustrated Podheads out there!

Why can't my latest iTunes delete bonjour and quicktime?

When downloading or updating itunes it says that lastest bonjor cannot be delete and quicktime cant be delete also which then quicktime cant be downloaded which then itunes cant.

Hello bluesrock,
Thank you for the details about the issue you are experiencing. It sounds like you are missing the AirPlay icon in iTunes.
I recommend reviewing the steps in the section titled "If the AirPlay icon doesn't appear" in the following article (you can skip the steps that refer to an iOS device since you are only experiencing the issue on your MacBook Pro):
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Thank you for using Apple Support Communities.
Best,
Sheila M.

Conflict between ITunes 6.01 and Quicktime 7.03?

Similar Messages

Maybe you are looking for