Conflict between mod_oc4j.conf and http.conf

If I put the line:
Redirect /webportal/destination http://www.destination.co.uk
into my httpd.conf file, it gets ignored because I have the following lines in my mod_oc4j.conf file:
Oc4jMount /webportal OC4J_NHSU
Oc4jMount /webportal/* OC4J_NHSU
The mod_oc4j.conf seems to be taking precedence.
Does anyone know how to get round this?

personally i wouldn't setup mod_ocy to do the proxy, but I would setup mod_proxy / mod_proxy_reverse. (to pass the request from port 80 to 7777 and reverse).

Similar Messages

How can i troubleshoot a "software conflict between a device and something in my original user account"

hi
my canon video camera (HV20) wasnt being recognised by iMovie (error message...in system report was "Unable to list FireWire devices".)
in researching a solution i came across some firewire advice in http://support.apple.com/kb/HT1151#trouble which suggests there may be a "software conflict between the device and something in your original user account."
i changed to another account on my iMac and my camera connected immediately.
is anybody able to explain how i go about fixing this "software conflict".
many thanks
Carlo

With the Mail.app quit and using the Finder, go to Home > Library > Mail > Mailboxes > Outbox.mbox.
The Outbox.mbox represents "Out" in the mailboxes drawer and is shared by all accounts.
Delete the Outbox.mbox and empty the Trash.
Launch Mail and a new Outbox.mbox will be created automatically by Mail within the Mailboxes folder and this should resolve the problem.

Changes to trusted.conf and security.conf

To allow external connections to our Apache server I am told we must configure the trusted.conf and security.conf files.
Below are some examples in our trusted.conf file. We have an external user who wants to get acces but I am not sure what information I need to be gleaning from him: hostname? IP?. Below, in the examples, I see no ip addresses nor hostnames.
And I am also not sure about how to configure / enter information in the security.conf file.
Thanks.
<Location ~ "/(oa_servlets|servlets|servlet|jsp|configurator|mobile|forms|discoverer4i|emailcenter|soap/servlet|webservices|
dmsOACore|dmsDisco|dmsForms|pricing)/oracle.xml.xsql.XSQLServlet/xsql/lib/XSQLConfig.xml" >
Order deny,allow
Deny from all
Allow from localhost
Allow from %oacore_fwk_nodes%
</Location>
<Location ~ "/(oa_servlets|servlets|servlet|jsp|configurator|mobile|forms|discoverer4i|emailcenter|soap/servlet|webservices|
dmsOACore|dmsDisco|dmsForms|pricing)/IsItWorking">
Order deny,allow
Deny from all
Allow from localhost
Allow from %oacore_fwk_nodes%
</Location>

Hi Dan,
Is that it? Just list the IP address ? To allow a connection from 173.00.00.0 ip, all i need to include is this:
Deny from all
Allow from 173.00.00.0Correct.
Also, what of the security.conf?A fully functioning configuration of security.conf is attached in the following document.
Note: 287176.1 - DMZ Configuration with Oracle E-Business Suite 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=287176.1
Regards,
Hussein

Conflict Between Bluetooth Mouse and WIFI?

I Bought the new MBPR X72 and a Iogitech Bluetooth Mouse.When i download something by Wifi,My mouse can't work well.I search the answer on Google,some people said that there is a conflict between Bluetooth mouse and Wifi.Because they are both use the 2.4G HZ.So anyone can help me ??

If you are on your home network, you could set the router and MBPr to use only the 5 GHz band if you are using the n-protocol WiFi. That would mean logging intothe router and changing band usage settings. The MBPr would follow what it sees as the wireless signal.

Version conflicts between host labview and RT engine

there is problem that i cannt switch target to feild point. It said that "version conflicts between host labview and RT engine" . But my labview is version 7.0 and the real time module is version 7.0 too. Anyone can give me hand? Thanks

Depending on your version of MAX, you should be able to change the version on the FP (in remote systems). If you can't do it in 3.0, try upgrading to 3.1 (you will have to search for it on the site). If that doesn't work, you can try resetting to factory default and then see if you can do this.
Another tip, which for some reason seems to help, is updating the OS\Run-Time Engine when windows is in safe mode.
Try these and see if they help.
BTW, as a tip for next time, you're more likely to get a good answer for something like this if you post in the FieldPoint board.
Try to take over the world!

Difference between XI adapter and HTTP adapter

Hi,
I am not very clear on the exact difference between XI adapter and HTTP adapter.
I want to know, when should we use XI adapter and when to use HTTP adapter.
Regards,
Santosh

Hi,
We use HTTP Adapter in case of the Application is trying to post the HTTP Request message to XI and able to receive the HTTP Message from XI also.
While using the HTTP as Sender , HTTP Sits on ABAP Stack and can able to communicate with the Integration Server Directly, No need of any Adapter here, it is adapterless communication
In Case of Client Proxies
Source application can directly interact with the XI by executing the report in SAP R/3 & will be able to send the XML data to IS,
So no need of the XI Adapter in this case to post xml to XI.
In Case of Server Proxies
Now XI has to post the xml data to the Target Application, here some thing shld be there to establish the medium with the Target System. So we use XI adapter here.
In the receiver case, we need XI Adaper to communicate XI integration Server with the Local Integration Engine( Which we made in SAP R/3's Business system as local IE) to post the data
Basically XI adapter will be used in normal scenarios also to communicate Adapter Engine with Integration Server internally while delivering the msg.
Check this Msg Flow how the XI Adapter is used in Normal Scenarios
Understanding message flow in XI
REgards
Seshagiri

/etc/launchd-user.conf and launchd.conf no longer work in Yosemite 10.10.2

As the subject says. According to this: https://support.apple.com/en-us/HT201684, they should. However according to the man page for launchd.conf. "launchd.conf is no longer respected by the system." Setting "umask 077" in /etc/launchd-user.conf should be forcing the default file creation permissions to 600, and folder creation to 700, but it is not doing anything.
I've tried this on a fresh install of 10.10.2. doing a "touch 1" creates a file named 1 with the perms -rw-r--r--. On a Mavericks install it creates a file named 1 with the perms -rw------- as expected.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Conflict between iTunes Match and Windows 8.1

I have been running iTunes on my fully updated Windows 8.1 PC for some time, without any particular issues. A few days ago, I activated iTunes match. It worked just fine, in the perspective of my iPhone and iPad. However, my PC stopped being responsive: Long time-outs on just about anything, and dialog windows refusing to appear (one of them being the McAfee console ....). A virus search using Microsoft's emergency services showed nothing.
The moment I de-activated iTunes match, everyhing reverted to normal.
My conclusion is, there is a major conflict between whatever the iTunes match service does, and the Windows 8.1 operating system.
Any idea what this is all about, and if there is anything I can do about it (except avoiding using the match functionality)?
I have the latest update of iTunes for PC.

Hi lars1950,
Welcome to Apple Support Communities.
It sounds like you're seeing issues with Windows responding slowly since enabling iTunes Match. The article below may resolve the issue for you, it describes possible conflicts with Layered Service Providers and how to prevent them.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
I hope this helps.
-Jason

Conflict between python-pyqt4 and python-pyqt5

Hi!
When trying to use matplotlib in the Spyder Python IDE I get the following error
RuntimeError: the PyQt5.QtCore and PyQt4.QtCore modules both wrap the QObject class
It's obviously a conflict between pyqt4 and pyqt5. However, pyqt4 is a hard dependency of Spyder and pyqt5 is a hard dependency of matplotlib. Outside Spyder, matplotlib works fine.
Does anybody know how to resolve this conflict? Or is it a packaging issue? Shall I file a bug report? I think a discussion about matplotlib depending on Qt5 had already been going on here.

Does it work with https://aur.archlinux.org/packages/pyth … tlib-noqt/ ?
I think it's OK to open a bug report.

Conflict between Logic Pro and external device error in Logic Pro X./cpu problems

hi Logic users,
using a MacBookPro 15 inch Retina, 2,7 GHz intel Core i7, 16 GB Ram, OSX 10,8,5, Logic X 10.0.4.
i am wondering if you can help me out with the following problem i cant solve:
when starting logic x with a not too big arrangement, lets say using one third to half of cpu, i open u-he plugin Diva and the cpu is going up on full range and the following error appears: "sample-rate 39299 (number always changes) reconized. Check conflict between logic pro x and external device"
as external device im running a VirusTi and as audio-device Apogge Duet. when dis-connecting both devices, i have the same problem.
putting the sample buffer up to the highest rate, doesnt change anything.
same arrangements on friends computers dont show that problem, so it has to be something wrong in my set up.
anybody has an idea?
would be much appreciated for your help,
thanx-

Have you used Diva's preset Accuracy system to reduce CPU load?
accuracy
Click on the Main button at the bottom of the window. To the right of the Master section are two selectors called Accuracy and OfflineAcc. In the current version of Diva these are global parameters i.e. they remain fixed across all presets, per loaded instance:
draft........CPU-friendly, but FM will sound rough and resonance is primitive i.e. NOT zero delay! fast......... Fine for older computers and/or when you need more polyphony in acceptable quality great...... The best compromise between quality and polyphony on high-power computers divine..... Top-quality zero delay feedback filters... but can your computer can handle it?
OfflineAcc only has two options – same or best (i.e. divine in the current version).
Some host applications may have problems rendering to audio at the selected accuracy, but the
better ones include an “inform plug-ins of offline rendering status” or similar.
I typically work in draft mode and then switch to Devine or best when freezing the track or bouncing the entire project...

Is there a conflict between Reader XI and Acrobat being used on the same computer?

I downloaded the new Abode Reader XI. The computer in question has, also, Adobe Acrobat 7. Is there a conflict between them if used on the same computer? I can not open any PDFs and now the saved PDFs I had on the computer will not open and the icon shown on the desktop is gone. Please advise as I scan documents to this computer all the time and the person who needs to see them can not.

I have Acrobat 8.1.6 and Reader XI on Win XP. Do these conflict? Should I get rid of the newer Reader?
I'm having problems printing to the PDF print driver, locks up system, shows printer offline in spooler. I doubt problem is with driver itself because I can print a Test Page from it ok. But printing to Adobe PDF from Word & other apps locks up & never completes.
There's an Exclamation Point next to Acrotray in Explorer. (see image) What does this mean??
Have tried Repair install of Acrobat twice.

Are there any known conflicts between Mountain Lion and Microsoft Outlook for Mac? After installing, I can't send or receive eMails

Are there any known conflicts between Mountain Lion (10.8.3) and Microsoft Outlook for Mac? After installing, I can't send or receive eMails. Using a Macbook Pro.

Is this a recent problem or has it been going on for some time. If you just updated to ML, you might want to confirm that you've update to the latest MS Office / Outlook patches.

Difference between URN, URL, and HTTP

hello,
wat is the diference between URN, URL, and HTTP

Hi BIndu,
If u have searched on SDN then u will get many answers.
Just refer the below links:
http://help.sap.com/saphelp_nw04/helpdata/en/4e/83623c9c6b530de10000000a114084/content.htm
XML Namespaces in XI (URL s. URN)
Namespaces: Difference between URN & URI
what is the diference for use either http:// or urn: in the namespace
difference between urn and url
Thnx
Chirag
Reward points for helpful answers.

Having a conflict between Firefox 4 and Endnote

After installing Firefox 4, when I tried to open Endnote (and yes I closed the program before installing Firefox 4) I got a message that Endnote was unable to open my library, check to see if anyone else is using it; if the problem persists use the recover library in Endnote. Well, I tried the recover library and it did not work. I did get my library back by moving the library to my desktop, I think all by references are there, however, I lost all my Groups, and the file attachments are all messed up.

I encounter immediate problems on installing Firefox 5. There were 3 Windows 7 crashes and I could not access Firefox. It was determined that there was a conflict between the anti virus program and the 5 version. There is no download for the older version 4 was not available. After trying several fixes, nothing worked.
One post indicated that Mozilla was not fixing Firefox 5 and that the fixes were made in Firefox 6 version. Reluctantly, I upgraded to six and , to my amazement, it works again. Nothing ventured, nothing gained!! Hope it works for you.

Conflict between Adobe Acrobat and Adobe Reader and how I fixed it

For the past 5 years, I have owned Adobe Acrobat version 9, and recently installed Adobe Reader as well (version 10.7). I was previously able to set up Firefox to use Acrobat to display PDF files in the browser without downloading them, but I recently noticed that this was no longer the case. Instead, every PDF file I tried to view was being downloaded instead. I came here to find a solution, and discovered that many other people are having similar problems. I followed the instructions given here (https://support.mozilla.org/en-US/kb/view-pdf-files-firefox-without-downloading-them), but found that they were actually UNhelpful. They tell you to turn off the Firefox PDF viewer by editing about:config to disable the file pdfs.js, which is the native Firefox PDF viewer-- but that will cause the PDF file type to disappear from the Tools/Options dialog, so you can't assign it to another program (whether Adobe or anything else). This makes it impossible to assign the Adobe plugin to open PDF files. I did figure out a solution on my own, and wanted to post it here to help other users with the same problem.
I ultimately learned, through trial and error and a lot of research both here and on Adobe's website, that the root cause of my problem was a conflict in Firefox between Acrobat and Reader. I was able to solve it by upgrading Acrobat, getting rid of Reader and enabling the Firefox PDF viewer so that I could assign the PDF file type to the Acrobat plugin within Firefox. Here are the details of my problem and how I solved it:
1. Acrobat and Reader conflict with each other in Firefox, but this isn't totally Firefox's fault. It's mostly Adobe's fault, and they pretty much admit it. Specifically, they say that Acrobat and Reader can't coexist on the same machine unless both are version 10 or higher. They tell you to upgrade to solve the problem--but I can't afford to pay for a new version of Acrobat. If you have to keep Acrobat 9.x, Adobe says the lowest version of Reader that will work with it is Reader 11. I couldn't upgrade to this because I have Vista, and Adobe hasn't issued Reader 11 for Vista (and doesn't plan to). I did cheat and download the Win 7 version of Reader 11, but it didn't help.
2. If you have both Acrobat and Reader, you can choose a setting in Reader to make it the default PDF handler--but Firefox ignores this information and defaults to Acrobat no matter what. (This is the part we can blame Firefox for.) If you have a version of Acrobat which is below 9.5.5, Firefox actually blocks it as a security risk, so the plugin won't work at all, regardless of version number. That's why PDFs are being downloaded through your standalone program instead of being displayed in the browser. If you want to view PDFs in Firefox and keep Acrobat on your computer, you MUST upgrade Acrobat to version 9.5.5 or above.
3. Unless you can upgrade Acrobat to at least 10.x, GET RID OF READER. As long as you can access Acrobat 9.5.5, it will work fine in Firefox and there's no need for Reader. I never used to have Reader myself, only Acrobat, but it must have been downloaded automatically when Acrobat was blocked by Firefox (which I didn't even realize).
4. IF YOU NEED TO UPGRADE ACROBAT 9.X TO 9.5.5, YOUR LAST CHANCE IS TODAY--6/26/13. Adobe has announced that today is the "end of life" for the Acrobat 9.x platform, and all support and upgrades will cease after today.
When I searched for updates by going to Adobe's website, it told me there were none available--but when I checked for them FROM THE ACROBAT PROGRAM ITSELF (Help/Check for updates), I was offered a 300 MB upgrade that took me all the way from version 9.0 to 9.5.5 in one step. (It did take a very long time to download and install.)
5. Once you have Acrobat 9.5.5, this is how to enable it in Firefox:
a. INSIDE ACROBAT, set your preference for "Internet" to "view PDF files in browser." Close Acrobat. Close Firefox if it's already open.
b. Reopen Firefox. Check Tools/Add-Ons/Plugins to make sure the Acrobat plugin is there. Enable it if disabled. Close Firefox.
If the plugin isn't there at all, repair your Acrobat installation through Control Panel. Then return to Firefox and enable it. Close Firefox.
c. Reopen Firefox again. Go to Tools/Options and check the list of file types. For the names that contain "Adobe" and "Acrobat," Acrobat should be set as the default program to open them. Select it from the drop-down list if it's not. Continue to scroll through the alphabetical list--you should see another entry called Portable Document Format. If it's there, the default will be "preview in Firefox." You should be able to change this to "Acrobat (in Firefox)" using the drop-down menu. Do NOT pick the option that says "Acrobat"--this is the standalone program and will cause your PDFs to be downloaded.
If you don't see "Acrobat (in Firefox)" as an option, this means your plugin is not working. Go back and fix it using the instructions above (including repair of Acrobat if necessary).
d. If you don't see a file type for "Portable Document Format" at all, that means the Firefox PDF viewer is disabled. You must enable it by editing the about:config file. To see it, type about:config in the Firefox address bar. You will get a warning message--just click OK and keep going.
This file is a long list of statements in alphabetical order. LOOK FOR A STATEMENT THAT SAYS "pdfjs.disabled" with a Boolean value of "true." Select this statement and right-click. A context menu will offer you choices including "Toggle." Select that one, which will change the Boolean value to "false." Exit about:config. Close Firefox.
e. Now return to Tools/Options, scroll through the list of file types, and you should see "Portable Document Format." Select "Acrobat (in Firefox)" as in the instructions above. Close Firefox.
f. The first time you try to open a PDF file in Firefox, you may get a dialog box which offers you choices of how to open the file. The first will be Acrobat, but DON'T CHOOSE THAT--it will cause your PDF to download. Instead, go to the choice that says "Open as application/pdf." You don't need to change the program that opens this file type, because your settings are already correct. Your PDF should open in the browser, with the full-featured Acrobat menu (including the option of editing or saving the file).
I hope other users can benefit from the truly painful experience I had figuring all of this out. Good luck.

Since it doesn't seem like you are looking for support, locking this thread.

Conflict between mod_oc4j.conf and http.conf

Similar Messages

Maybe you are looking for