Conflict between Photoshop 7.0.1 and Mac OS 10.6?

I have just installed OS 10.6 on my Intel iMac.  I get the following message when I try to launch Photoshop 7.0.1: "An unexpected and unrecoverable problem has occurred because of a program error.  Photoshop will now exit", which it does.  I had no problems using PS with OS 10.4.  Help?

A forum search yielded this for example:
http://forums.adobe.com/message/1528779#1528779
So You could either stay with Mac OS 10.4 or buy the new Photoshop.

Similar Messages

  • Is there a conflict between Safari 4.0.3 and the latest version of FlashPlayer? Everytime I try to download, FP ends up in "Disabled Plugins" in my Library, and I can't move it out of there.

    Is there a conflict between Safari 4.0.4 and the latest version of FlashPlayer? I have tried repeatedly to download and install the latter. Instead of properly installing, FP ends up in my Disabled Plugins folder in my Library. Help!

    Safari 4.0.4 or 4.0.3 ??  your profile shows you are running v10.6.8.
    If you are running v10.6.8, click your Apple menu  / Software Update. The current version of Safari is 5.0.5.
    Then if necessary, reinstall Flash.

  • AirDrop doesn'n work between Macbook Pro Mid 2012 and Mac Book Air mid 2013 using both Yosemite

    Can't search other devices using AirDrop between between Macbook Pro Mid 2012 and Mac Book Air mid 2013 using both Yosemite...
    And trying with MBP late 2011 can't connect either

    Hey aniMix,
    Thanks for the question. I understand that you are experiencing issues with AirDrop. The following resource provides some troubleshooting information which may be helpful:
    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
    http://support.apple.com/kb/HT6510
    Thanks,
    Matt M.

  • Photoshop CS6. Windows and Mac pop-up/drop down menus

    Hi guys!
    I have a problem with pop-up menus in CS6 (13.0.5) and ACR (white balance) under Mac OS 10.8.5.
    I have been working with photoshop on PC under Windows for the years. I recently had to switch to CS6 on Mac.
    I can no longer place my cursor in the Photo Filter preset mode (or ACR white balance presets) field and use arrow keys to quickly toggle through different presets/modes to find the ideal mode.
    I know that with Shift+ an Shift- one can toggle between blend modes (Layers). But these keyboard combinations do not work for Photo Filter and other pop-up/drop down menus.
    I used to be able to preview a lot of filters (or other modes) in seconds to choose the optimal. Now I have to click this button and click again on each photo filter. This is lengthening enormous the process.
    On my Mac, I can certainly click in the menu and use the arrow key to go up and down but what that does not do is apply the blend mode, unless I also press Return. But pressing Return kicks you out of the menu so you have to start the click/arrow/Enter cycle again, which is a long way just to try the next blend mode.
    It is very annoying. Please help! Thank you very much!

    Hi guys!
    I have a problem with pop-up menus in CS6 (13.0.5) and ACR (white balance) under Mac OS 10.8.5.
    I have been working with photoshop on PC under Windows for the years. I recently had to switch to CS6 on Mac.
    I can no longer place my cursor in the Photo Filter preset mode (or ACR white balance presets) field and use arrow keys to quickly toggle through different presets/modes to find the ideal mode.
    I know that with Shift+ an Shift- one can toggle between blend modes (Layers). But these keyboard combinations do not work for Photo Filter and other pop-up/drop down menus.
    I used to be able to preview a lot of filters (or other modes) in seconds to choose the optimal. Now I have to click this button and click again on each photo filter. This is lengthening enormous the process.
    On my Mac, I can certainly click in the menu and use the arrow key to go up and down but what that does not do is apply the blend mode, unless I also press Return. But pressing Return kicks you out of the menu so you have to start the click/arrow/Enter cycle again, which is a long way just to try the next blend mode.
    It is very annoying. Please help! Thank you very much!

  • File sharing between PC XP SP 2 and Mac OS X 10.4.2

    I would like to share file between my two Macs and a windows PC via AirPort. I can access from the PC to the Mac but not vice versa. I followed the instructions at www.efelix.co.uk/tech/3001.html but every time I try to get access to the PC with "connect to server" the system shows me error code -35.
    Any solutions?
    Thanks in advance!

    My home network is similar, but I can't figure out what to do next in order to transfer files between the Macs and the PC.
    I've disabled firewall (Windows) and internet security (TrendMicro), and confirmed IP and Submask Numbers. Still no success.
    Here's more details of what I have:
    AirPort Extreme Base Station connected to DSL modem.
    eMac and three iBooks, connected wirelessly to ABS.
    Filesharing is on for these Macintosh computers.
    -This works fine for transferring files and for internet access.-
    Just bought eMachines T6520 running Windows XP Home;
    connected via ethernet cable to ABS.
    -This PC works fine for internet access.-
    WHAT IS THE KEY TO GETTING THE Macs to see the PC, and the PC to see the Macs?

  • Conflict between Audigy 2 ZS Pro and four Wifi PCI Ca

    Hello,
    I apologize for my wrong English.
    I am an happy user of Audigy 2 ZS Pro.
    I tried to install a WiFi PCI Card and the PC freeze just after the launch of Windows XP SP2.
    I tried with four cards with respect of installation procedures :
    - D-Link DWL-G520
    - OvisLink Evo-W54PCI
    - SMC-Networks SMCWPCI-GM
    - Netgear WPN3
    and none of them works.
    There is a conflict with memory resources allocation : D7DF8000-D7DFFFFF for Wifi Card and the same for Firewire port of Audigy.
    It is impossible (for me) to desactivate Firewire port on Audigy or changing memory allocation.

    I'm quite sure it's an incompatibility between the SLi and the audigy 2 card whether that's a driver conflict or hardware conflict I have yet to determine, since it's behavior is very random if I play games with sound disabled it works fine if I leave internet explorer open though when the page refresh click sound is played while I have a game running it will cause the comp to freeze and reboot. I did not have the realtec(k) ? drivers installed before I removed the audigy 2 card I also had the realtec onboard sound disabled in the BIOS as for speed settings I have no clue what you are talking about I pretty much leave teh bios settings default except for the disabling of the unused onboard devices.Message Edited by psaux on 03-28-20060:2 AM

  • Possible Conflict Between iPhoto/OSX10.4.2 and POSER6

    Running iPhoto 5.0.4
    Upgraded to OSX 10.4.2 and POSER 6 over the weekend. Since this load I have lost access (from within iPhoto) to my photofiles. Thumbs load however cannot get full view (just the roatating circle) Then hangs until I click the Done Button.
    The Files are there and will open in Preview and Photoshop. Also cannot Import new files either by drag and drop or from Camera. Get error message stating that files might me in wrong format. Photofiles are OK and will Import to older mac running iPhoto 2 and OSX 10.2
    Have restored iPhoto from DVD and still the same.
    Any Ideas?

    Hi John,
    don't know if it is just a coincidence that your iPhoto problems started at the same time as you new installations or not.
    check out the suggestions on Page 1 to see if any help.
    iPhoto Help
    iPhoto Help 2

  • Sparks between external HD usb cable and Mac Pro case

    Hi all,
    I just wanted to see if anyone could say how usual (or not) this was - basically I noticed that as I go to plugin a usb cable which is connected to a powered external HD, any contact between the cable connector and the metal case of the mac cause little sparks.
    I haven't noticed this before, although it's possible I was just more precise with my plugging ability
    I had a search but all I could find was reference to the laptops or an iMac.
    Thanks

    It could be a problem with the power supply for the external HD. Does it have a three prong plug? If it's two-prong, try plugging it in the other way. It could be dangerous if it's a direct short from the lne input to the output in the HD power supply.

  • Why do I get a class conflict between the Prepare SQL.vi and the Get Column Name.vi with the SQL Toolkit compatibility vis from the Database Connectivity Toolkit?

    I have done extensive programming with the SQL Toolkit with LabVIEW versions through 6.1. My customer now wants to upgrade to Windows 7, so I am trying to upgrade to LabVIEW 2009 (my latest purchased version) using the Database Connectivity Toolkit, and the SQL Toolkit Compatibility vis. Everything seemed to be going okay with the higher level SQL operations, but I ran into trouble with the Get Column Name.vi. 
    The pictures below show the problem. The original SQL Toolkit connected the Prepare SQL.vi with the Get Column Name.vi with a cluster of two references, one for connection, and one for sql. The new compatibility vis have a class conflict in the wire because the Prepare SQL.vi contains a cluster with connection, and command references, but the Get Column Name.vi expects a cluster with connection and recordset references. 
    How do I resolve this conflict?
    Thank You.
    Dan

    I've never worked with the old version of the toolkit, so I don't know how it did things, but looking inside the SQL prep VI, it only generates a command, and the the column name VI wants a recordset. I'm not super familiar with all the internals of ADO, but my understanding is that is standard - you only have the columns after you execute the command and get the recordset back. What you can apparently do here is insert the Execute Prepared SQL VI in the middle and that will return what you need.
    I'm not sure why it worked before. Maybe the execute was hidden inside the prep VI or maybe you can get the column names out of the command object before execution. In general, I would recommend considering switching to the newer VIs.
    Try to take over the world!

  • No calendar synchronization between iOS 6.1.3 and Mac OS 10.9

    Dear all,
    I am using an iPhone 3gs with the latest supported iOS 6.1.3. On the other sise I use an iMac with OS 10.9.(Mavericks)
    I want to synchronize my calendar details between these two devices. I have configured my iCloud Account and my calendars are visible when I log in by using a web browser. I have also checked the Storage & Backup Settings on the iPhone and there obviously storage at the iCloud in use because I can see that there are less than 5GB avaliable.
    But the new calendar entries are not available on the iPhone.

    Well, I have checked the iCloud settings on the phone. As I have mentioned above the are obviously storage at the iCloud in use because I can see that there are less than 5GB avaliable. But I can not see the new calendar entries on the phone.

  • File Sharing between Snow Leopard MacBook Pro and Mac OS 8.6 Powerbook 1400

    well ok, for some this might sound ridicule. Why should I still be using a 13 year old PowerBook. Let me tell you, this is writing/typing heaven, Zen-like; no distractions at all, no twitter, no internet (although possible), no emails just pure you and your text and if you spin down the HDD, absolute silence. as said before pure Zen writing heaven. and on top of that you're typing on the best keyboard ever on a laptop.
    As you might see I love my vintage masterpiece of a laptop and use it on a regular basis. Just one Problem.
    Since I Installed Snow Leopard on my MacBook Pro 17" I just haven't been able to establish a connection between the two machines.
    I have to admit, I'm not that versed with OS 8.6 but with 10.5 I had absolutely no problems accessing the shared folders on my MacBook Pro and vice versa.
    My first thought was to activate Appletalk on the ethernet on my Macbook, which I failed to find anywhere. The Apple Discussions Forums revealed that Appletalk has been dropped with the introduction of Snow Leopard but all the entries where regarding printing issues with shared printers, I didn't find anything about actual file sharing and thus did not get any clues how to share files between my two machines.
    My PowerBook 1400cs/166 runs on 8.6 and I use a Global Village Platinum PCMCIA card (modem and Ethernet combi card). this setup worked perfectly with 10.5 but I have not been able to make establish a connection since running 10.6 on my MBP.
    I am really desperate since I heavily depend on being able to exchange files between those two machines through an ethernet connection.
    So I kindly ask anyone who might be able to help me to please consider posting any solutions or at least ideas which could help me with my problem. I really would greatly appreciate any effort whatsoever.
    Thank you very much for your time.
    EDIT:
    What I forgot to mention: strangely enough, when I enable Internet Sharing on my MacBook Pro (through Airport) to Ethernet, my PowerBook 1400 can connect to the internet without any problems.
    Message was edited by: Apolloss

    First of all let me thank you very much. It actually works (partially).
    There seems to be a problem though. While I can connect perfectly from my MBP 10.6 to my PowerBook 1400, the other way round doesn't work.
    My MBP does not show up in the Network browser of OS 8.6 but I could life with that.
    The problem is that if I try to connect to my MBP from my PB1400 by entering the IP directly a alert message appears reading that the "User Authentication Method required by this server can't be found, please check the AppleShare folder in the Extensions folder and try again".
    Do you have any clues what I'm doing wrong or where the problem may lie?
    PS.
    Even if you may not be able to further help me with this problem, I ow you a great deal of gratitude and am very thankful for your help so far. At least I can exchange files between the two machines and that's what I needed in the first place.

  • Is there a conflict between Firefox 3.6.13 and Adobe Reader X?

    Since installing Adobe Reader X I am frequently unable to open a pdf file from a remote site within the browser.

    I have Acrobat 8.1.6 and Reader XI on Win XP. Do these conflict? Should I get rid of the newer Reader?
    I'm having problems printing to the PDF print driver, locks up system, shows printer offline in spooler. I doubt problem is with driver itself because I can print a Test Page from it ok. But printing to Adobe PDF from Word & other apps locks up & never completes.
    There's an Exclamation Point next to Acrotray in Explorer. (see image)  What does this mean??
    Have tried Repair install of Acrobat twice.

  • Conflict between teststand models in NI and User folder

    Sir,
    I have customized NI's teststandmodel (modelsupport.cws) for my application and placed it in User folder. But still my application is using TestStandModel (modelsupport.dll) under NI folder.
    If I change t"StationModelPath2" in "TestExec.ini" under "National Instruments\TestStand 3.5\Cfg\"; am able to get the customized version of modelsupport.dll. In that case I am getting an error (Error1)during execution of the sequence as attached below. Another issue with this is if I try to open a teststand sequence through testStand another error (-17329) is poping up.
    Please help me out. I am using teststand 3.5 and labwindows 8.5

    Safari 4.0.4 or 4.0.3 ??  your profile shows you are running v10.6.8.
    If you are running v10.6.8, click your Apple menu  / Software Update. The current version of Safari is 5.0.5.
    Then if necessary, reinstall Flash.

  • Conflict between ATI Multimedia Center Library and iTunes

    I have the HDTV Wonder with my computer. I can record TV shows and in the ATI Multimedia Center Library, it's a "cinema" type of file. Whwn I listen live a TV show, the program record automaticaly the TV show and in the ATI Multimedia Center Library, it's a "TV-ON-DEMAND" type of file. Both of the two types of file have ".VCR" extention. I have no problem to listen the "Cinema" type of file. When I try to listen the "TV-ON-DEMAND" type, it's iTunes who start and it can't read this ".VCR" file. I can't find what is the problem. I have this problem since I upgrade iTunes. iTunes is not my default player and the .VCR file is associate to ATI Multimedia.

    Thanks a lot for no response  I discovered Disk Utility.

  • Conflict between EMU 1212M PCI-e and Gigabyte 970A-D3 High Latency!!!

    I recently built a new DAW around my EMU 1212m PCI-e card using a Gigabyte 970A-D3 , Phenom2-X6 T1055 Chip. The reason I built this new DAW was because all of a sudden my old DAW started having unusually high latency and uneven core distribution (core 1 was amped out) this started after I flashed the BIOS to my old board and I updated Sonar to X1c. I tried various setting with the old DAW but could no longer get the performance prior to these changes. My original plan was to change the motherboard and memory and put into DDR3 and keep the original chip but that made things worse. So I then decided to go to the 6 core it was cheap enough so what the heck, but the same thing now luck. I then tried to use a USB based audio interface for the test I just purchased a Behringer UCA202 and I found a much improved response. My final test was to try yet another board my choice for the board was the MSI 870S-G54 and I got much better results but not as near as good as I was getting originally.
    Please note that with each of these test I was exchanging cards to different slots, trying various BIOS setting and all driver are current and updated and baI sically doing what ever it take to troubleshooting a DAW but I have seen absolulty no changes. All power saving setting on the BIOS was turned off (C-1 halt, AMD Cool & Quiet, TurboBoost, etc)With the change to the MSI board I was able to get about 30 tracks of VST's running at about 6ms however with the Gigabyte board I was getting at 50ms with he same project it was crapping out.
    Reaper has far less power usage as is expected from Reaper yet it was halting and glitching. Comparing the Behringer to the EMU showed about 25% less CPU useage.
    My questions are as follows:
    Anybody out there had a problem with the C1 update?
    Anybody having trouble using a Gigabyte board?
    Anybody having problems with the EMU card over any other Audio Interface?
    Each time I updated a component I did a clean install of Win7-64bit. I should also let you know that I am using the 32bit versions of Reaper in Sonar only because the project that I am finishing now started in 32bit.
    Does anyone have any clues? Please help.....

    JJ,
    Have you tried [url=http://www.thesycon.de/deu/latency_check.shtml">http://www.thesycon.de/deu/latency_check.shtml[/url]
    This app may give you a better idea of what is going on in your system.
    Also what resources are being used ? Is the card sharing IRQ's
    With multicore systems sometimes you may want to try assigning CPU affinity to just one Process like the emaudsv.exe
    Casey

Maybe you are looking for