Conflict between third party drivers

I've been starting to get those error-messages that says;
"Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers.
Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer, and remove any older unused drivers."
Then I have an option to press "OK", I do and it appears 3-4 times, and then eventually Logic Pro starts up, but all is very slow. After a reboot it disapears, but as soon as I restart Logic it comes back again.
I tried to disconnect every unit, remove and re-install every driver, but it's still there.
I'm using a Powermac 2 x 2.0 with a MOTU soundcard, and I hava an old MT4 connected. Anyone who experienced a similar situation?
Thanks in advance.

I have looked in Library/Audio/MIDI Drivers and there is just one file called EmagicUSBMIDIDriver.plugin - can this be causing the problem?
Nothing on User/YourName/Library/Audio/MIDI Drivers.
I have found 3 AVID folders on Applications:
- Avid MetaSync Manager
- Avid MetaSync Publisher
- Avid_Uninstallers
Shall I remove these?
There is also an empty folder called Digidesign on User/Library/Audio/Plugins
I have tried it with the M-Audio card connected and selected in Logic, and it doesn't work.

Similar Messages

  • MainStage message: possible conflict with third party midi or audio drivers

    Just when I thought everything was going to be ok...
    MainStage gives me a message that it detects a possible conflict with third party audio or midi drivers. The only midi device I'm using is class compliant (doesn't need a driver). My audio interface is an Apogee Duet and I'm using the most recent driver. Logic registers no such complaint. MainStage freezes. Any ideas?
    Thanks,
    Mark

    Hello.
    I am seeing this whenever MIDI events are being sent into either Logic or MainStage (primarily MainStage), while they are launching. On my setup, this will either crash the application during launch, ( sent to Apple ) or trigger this "...3rd party conflict / driver..." dialog.
    In either instance, disabling incoming MIDI messages by turning them off on all connected MIDI devices, or as suggested, waiting to connect the device in question until, the application is fully launched, fixes my version of this issue.
    ** Please Note: In my experience, increasing the number incoming MIDI messages, exacerbates the issue and, makes a dialog or crash more likely to occur.
    Hope this is helpful.

  • Conflict with Third Party Apps?

    I am getting an occasional error saying there is a possible conflict with third party apps and that I need to check the drivers of my MIDI devices to see if they are up to date? Sorry but I did not record the exact wording. Does anyone know what this might mean, and how I need to go about checking drivers? I have a lot of interfaces and not sure how to see what's what. Thanks.

    Hi Midlake,
    Well, because they are known troublemakers. Search for 'takes' or 'take folder(s)' or 'comp' here on the forum and you'll find many a troubled soul crying out for help - including seasoned pro's, who thought they were beyond tears...
    O, they are fine for recording many takes - but thats' all. I'll select the best takes/phrases.
    regards, Erik.

  • Install third-party drivers in 3.2

    Hi all,
    after (clean) installing SQLDev 3.2, I'm unable to add third-party drivers in the automated way (from Tools/Prefs/Ext/Check for up):
    - tried (multiple times) with MSS and MySQL drivers,
    - pop-up window (licenc-agrement) appears and
    - nothing else happens.
    Checking the <profile>\SqlDev mappa shows a dir named "temp\update" has just created and it contains the expected files (eg. oracle.sqldeveloper.thirdparty.drivers.sqlserver.58.17.zip) with 0 bytes.
    Any idea?
    OS: Win7(x64), Java(TM) Platform     1.7.0_09, Oracle SQL Developer 3.2.20.09 Build MAIN-09.87.
    (Manual installation of this drivers works fine.)
    Thanx,
    M. Zsolt.

    Thanks,
    I guess there is some problems with the update center: drivers also cannot be installed with JDK 1.6.37 and other extensions install normally.
    BTW:
    SQLDev works quite well with JDK1.7 (at least, I didn't find any "big" errors, some minor bugs are out there, of course),
    moreover, it works also with MySQL-connector-5.1.22 :) - even though it's stated in the Rel.notes: "Do not use the latest MySQL driver 5.1. Use the 5.0.x drivers for MySQL."
    M. Zsolt.

  • Sync data between third-party contacts and calendar apps, and the native apps, in 10.9.3+?

    I've had to refrain from updating my Mac Pro from 10.8.5 to 10.9 owing to the removal of SyncServices.  I then read that SyncServices was re-introduced on a limited basis in 10.9.3. 
    It seems unlikely, but I'd like to know whether or not SyncServices in 10.9.3 re-enables the syncing of data between third-party contacts & calendar apps and the native apps, and thereby enables syncing of contacts and calendar info between third-party apps and iOS devices over USB via iTunes.  This is the method I use exclusively by choice in 10.8.5, and I will not change it to a cloud-based solution under any circumstances.
    If it is not possible, is there a third-party workaround?  My calendar app on the Mac Pro at the moment is BusyCal, syncing with Week Cal on the iPhone, but I'll happily buy a new combo of apps if it means I can upgrade to Mavericks and retain USB syncing.
    EDIT: a solution which permits syncing of a third-party calendar app on the Mac Pro with a third-party calendar app on the iPhone over an ad-hoc wireless network would also be acceptable, I suppose.

    Well, that's pretty disappointing.  I guess Apple believes Internet is free and everywhere.

  • Third Party Drivers needed!

    Sometimes I hate upgrading my OS, because of all the things that stop working after EVERY upgrade.
    I have been using Macs since '84 and Mac OS 4.1, and every time I upgrade, some hardware and software stop working after the upgrade.
    Sometimes it is major, like going from OS 6 to OS 7, or OS 7 to OS 8 and of course every major version of OS X.
    Part of problem is getting upgraded drivers for OS X, and some times I can go to the product manufacturer for new drivers, but not always.
    Where can I go for Third Party Drivers when the product manufacturer doesn't want to make them?
    Is there someplace that has lots of Third Party Drivers for printers, scanners and keyboards, Etc?
    I have stuff that still works fine in OS 9 but not in OS X. Like a UMAX Astra 3400 scanner, and other things that work OK, but I can't access utilities like a HP desk-jet 895 Cxi printer.
    I don't want to have to buy all new hardware every time I upgrade the software, so I don't rush out and get the latest upgrades until they have been around for awhile.
    It would be nice to have somewhere to go for all these problems, as well as when I buy a new piece of hardware and it doesn't come with needed Mac drivers at all.
    Any ideas here?

    Welcome to Apple Discussions!
    The problem occurs just as much because products get discontinued as drivers becoming outdated. However, many open source companies are making drivers now. I would check my FAQ:
    http://www.macmaps.com/macosxnative.html
    To find out if any of your devices have available updates.
    And note when updating only to do so when you absolutely need to do so. Reasons for need are usually software and hardware which improve your productivity that are only available on new hardware, or inability to find older hardware when your previous machine dies. As long as you backup your data before any updates, software issues should be minimal as my FAQ explains since you'll be able to restore your backup if an upgrade messes up your drivers:
    http://www.macmaps.com/backup.html

  • Is there any dependency between third-party adapter and XI system service?

    Hi Friends,
    I'm developing a thrid-party JCA adapter(deployed under sap.com) on SAP XI? In the adapter, it will use "ModuleProcessor" EJB system service.
    I found sometimes if the JCA adapter cannot be started correctly, the other system service also not started. And checking the log, I found the reason the JCA adapter not started, is because the "ModuleProcessor" EJB system service is not started.
    so just want to know is there any dependency between third-party adapter and XI system service?
    Thanks & Regards,
    Jason

    Hi soo.richard,
    You say it could be intruders cutting in - same problem/solution as for any network I think. Access can be password protected or access limited via MAC address filtering. I'm not sure how Apple Tv works with a hidden SSID but that would be another option.
    Airplay itself can be password protected through the airplay settings.
    I'm not sure if Apple TV works with other authentication such as a password but maybe the manual will assist with this?
    Hope this helps.

  • Can any one tell me the difference between third party sales & intercompany

    Hai
    can any one tell me the difference between third party sales & intercompany billing
    reg

    Hi,
    In THIRD PARTY, Goods are sent to customer from the Vendor and no Delivery happens from Company Plant
    In THIRD PARTY, We will Pay to the Vendor and Bills Customer.
    In THIRD PARTY, the PR will be generated automatically from the Sales order
    In INTERCOMPANY Process, Goods are sent to customer from the Supplying Company code  to which an order was placed from the Ordering Company code
    In INTERCOMPANY,, Plant of the supplying company code will be assigned to the Ordering Sales Organisation
    In INTERCOMPANY , We Bills the customer and settles to the SUPPLY COMPANY CODE
    We will use two Pricing procedures, One Normal pricing and other is INTERCOMPANY pricing procedure.
    These are the Major differences.
    Please check these and revert back if you need more details
    regards,
    santosh

  • Installing third party drivers not in instr.lib

    Hi, 
    (LabVIEW 2013 SP1)
    We are using LabVIEW to develop on multiple stations and we use source code control application to control the version and compatibility of the VI's.
    We are using many third party (not NI) instruments and we "install" their drivers at - 
    C:\Program Files (x86)\National Instruments\LabVIEW 2013\instr.lib
    This creates some difficulties since this folder is external with respect to the SCC application so this resource is not version controlled, whether someone downloads a different version or one add/changes another feature.
    It will be easier also to copy the development folder from one computer to the other.
    1. Is it possible to change the default behavior of LabVIEW Environment to load drivers to the Intrument Drivers palette? 
    2. What do you recommend ?
    Amitai.

    There are a few options here for you.
    1. Just put the drivers in your project folder and edit them to look at their new location instead of instr.lib.  That should be just a matter of loading them and resolving the conflicts.
    2. Use VIPM to make packages of the drivers and then everybody can install the packages.  This way they know what version is getting installed.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Third-party drivers with kernel updates

    I am using a third-party driver for my wireless card because the driver that comes with the kernel doesn't work too well. The problem is that whenever I update the kernel, the driver does not get included... it sits in the old kernel directory. Is there a way to have mkinitcpio grab drivers from an external folder location? Currently after every update, I have to make a symbolic link to the drivers and then run depmod -a, which is getting old.
    I appreciate any help. Thanks!

    what third party driver? i dont think there is a provision to have the driver automatically built.
    you are supposed to build the driver against the new kernel headers every time. not just symlink the .ko file in the new kernel modules directory. if its a binary blob. you might run into problems later on.
    how did you get this  .ko module in the first place?

  • Difference between third party and drop shipment

    Dear Gurus,
    Could some one explain me the difference between a Third Party Order (TA) and a Drop Shipment Order (DR). I want to understand the process difference and the how the inventory is affected in both the types.
    Thank You very much in advance.
    Regards
    Kumar

    Hi,
    Just do a serach in forum, you can get answers;
    For example see the link;
    [Drop Ship & Third Party|Re: Drop Ship & Third Party]
    Regards,

  • Integration between third party software and SAP

    Hi all,
    I have requirement in which i have to integrate SAP with third party software. My third party software will be generating material no as we generate in SAP then after the generation of the Material No by the third party software again i have to pull the material no generated and corresponding information into SAP .Please tell me how to do this as i am new to these concepts and if possible please send links from where i can download study materials.
    Thanks and Regards
    Manu.

    Hello Manvendra,
    There are many approches for solving this integration issue:
    But before solving this issue there are few questions which need to be known:
    1. In what form the material no list is generated? i.e. some flat file, in database table, or shared memory
    2. What is the language for 3rd party software? C, Java, .Net etc
    3. What is the frequency of material number generation? i.e. is it on demand, batch processing etc
    Considering 3rd party software is generating flat file or csv files for material number we can have this integration in
    following way:
    1. Save file at particular location.
    2. You can configure logical path in FILE transaction
    3. Write ABAP report to read that file using logical path and file name.
         Refer following link for Link: [logical path creation|http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/content.htm]
    4. Read file into internal table using Link: [GUI_UPLOAD|http://saplab.blogspot.com/2007/10/sample-abap-program-to-upload-table.html].
    5. Create BDC recording for MM01 transaction for material creation using Link: [SHDB|http://abaplovers.blogspot.com/2008/02/recording-bdc-using-transaction-shdb.html] transaction code.
    6. Using data from internal table and BDC recording create all the materials in SAP systems.
        In this step you need to loop at internal table and fill data variables in BDC recording with the internal table data
        and call the transaction MM01 for creating material.
    Above steps are very high level guidelines and it is one way of integration but concept wise more or less integration will be in same way!
    You can definetly fine tune it by exploring SAP help!
    Enjoy SAP!
    Thanks,
    Augustin.

  • CS4: conflict with third-party plugin

    Hi
    We face the issue that our plugin conflicts with an existing closed-source plugin. We use a unique developer ID and I believe that all declarations in our plugin are correct. My question; how can I get indesign to yield more informative error messages, than just the usual conflict dialog upon startup?
    -and can the conflict be caused by other issues than misdefined pmid's?
    Thanks!
    Kind regards Toke

    I never encountered conflicts other than the ID clash. You can verify if the culprit is your plugin iD or not by trying the plugin ID of some other plugin you had developed in this plugin just for a test to see if it resolves the problem.
    You could also try and comment out declerations from your plugin to zero down on the decleration that is causing the issues.
    Manan Joshi
      - Efficient InDesign Solutions -
    MetaDesign Solutions
    http://metadesignsolutions.com/services/indesign-development.php

  • Class conflicts with third-party libraries on j2ee engine

    Hi,
    I am deploying a repository manager into EP. In my repository I referenced javax.xml.namespace.QName, which conflicts with the one declared in jaxrpc.jar in j2ee/cluster/server0/bin/ext/webservices_lib.
    I am not very clear about how NW j2ee engine loads classes, but it seems that it loads classes in j2ee/cluster/server0/bin/ext/webservices_lib first. As a result, I got a class confliction error:
    java.lang.NoSuchMethodError: javax.xml.namespace.QName.<init>(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)V
    If I remove QName.class from the jar in webservices_lib, it works fine, but this not the right way. I have read Note 990854, but not clear about how to do. Could anyone give any help?
    Thanks,
    Ray

    Close this thread as it makes little sense.

  • How to download third party drivers for mac

    when i download drivers i get a message that says "driver can not be opened because is from unidentified developer

    Go to your preferences and set the gateway to allow download and installation of all programs.

Maybe you are looking for