Conflict for a XI track in NWDI on the assembly tab

Dear friends,
I have defined a XI track in NWDI/CMS. But on Assembly tab I get a conflict error. The log message is:
Info:Starting Step Check-assembly at 2008-01-21 17:42:04.0367 +0:00
Info:Checks for software component A_TEST are performed now:
Info:Checks for software component A_TEST finished succesfully
Info:Checks for software component I_FGT are performed now:
Info:Checks for software component I_HGFfinished succesfully
Info:Checks for software component HGF are performed now:
Info:Checks for software component A_HGF finished succesfully
Info:Checks for software component O2C are performed now:
Info:7XI conflicts
Info:Step Check-assembly ended with result 'error' ,stopping execution at 2008-01-21 17:42:07.0394 +0:00
Can you help where to look and what to do?
Kind regards,
Kamran

Hi
The following logs exist for the assembly step:
●      Check-assembly: Checks whether the prerequisites for a successful assembly exist. The following individual checks are performed:
○       Are there open build requests in the buildspace?
○       Are there open conflicts in the workspace?
○       Are there any broken DCs in the build compartment?
○       Are there any “dirty DCs” in the build compartment?
○       Are there any problem DCs in the build compartment?
○       Are there any pending activities that are not yet completely activated?
For detailed monitoring of a central build, use the Web UI of the Component Build Service (CBS).
http://help.sap.com/saphelp_nw04s/helpdata/en/ab/40833c87ac4d0cb5c4c44da8259386/frameset.htm
If the track deletion in CMS should fail for some reason, CBS administrators can delete a buildspace manually.
       1.      Start the CBS Web UI.
       2.      Navigate to the Buildspaces view.
       3.      Select a buildspace to delete.
       4.      Choose Delete.
Let me know if this could help you
thanks
Swarup

Similar Messages

  • I am unable to turn on do not track in Safari through the Develop tab. How do I turn this feature on in my MacBook Pro?

    I am unable to turn on do not track in Safari through the Develop tab. How do I turn this feature on in my MacBook Pro

    Open Safari > Preferences > Privacy and tick Tell websites not to track me

  • I want to add Narration to my movies. I've watched the Elements Guided Help for Narration. But when I click the RECORD Tab, I get an error message. "Your current audio hardware selection does not have any inout channels." My question, therefore: Do I need

    I want to add Narration to my movies. I've watched the Elements Guided Help for Narration, and closely followed their procedure. But when I click the RECORD tab, I get an error message. "Your current audio hardware selection dos not have any input channels." My question, therefore: Do I need to buy an external microphone? I have an HP Pavilion Laptop, running WIndows 8.1. I thought I had a built-in microphone. But ,maybe not. Please help. Also, WHAT KIND of microphone - exactly - should I buy? Thanks for your help.
    Mike Moore
    Corvallis, Oregon

    mikem
    Go to Edit Menu/Preferences/Audio Hardware and ASIO tab and click on it.
    Under the Input tab, make sure that you have your microphone selected.
    Please let us know the outcome.
    Thank you.
    ATR

  • How can I add the lyrics for songs in MP3 format in iTunes for Windows? There is even no the 'Lyrics' tab in the 'Get Info'.

    This topic may be old for you, but I searched everywhere on internet and there's still no solution. I even called the Apple Support and the contact support is taking so long to answer... I can't add the lyrics for songs in MP3 format in my iTunes 11.1.3 for my Windows 8.1, I clicked right at the song in my iTunes library, clicked 'Get Info', and there's no 'Lyrics' tab there. I tried several lyrics-adder programs but they just won't work. How can I add lyrics for my MP3 songs then?

    You may find that the file is Read-only, which means that it cannot be altered.
    However, you can change the Read-only in "Properties" using your file manager.
    1. The location (for the next step) of a song is found by looking n the Get Info/Summary>Where: of each song. Make a note of the location.
    2. Go to the location (on your computer) of the song, right-click it and the last item on the pop-up menu is Properties. Go into Properties/General>Atributes and turn off the tick in the box named Read-only. Now go back to your iTunes Library and try that song again. The Lyrics tab should now be there.

  • Is it possible that an 'check for updates' button can be added under the update tab instead of waiting for Thunderbird to check in the background please?!

    I'm not always able to 'catch' the update notification popup when it happens, and I do not wish to allow automatic updates without my approval. I have a rather 'sensitive' internet situation. Would it be possible to add a button under the updates tab to allow us to manually check for updates please? This would greatly help my situation.
    Thank you for your time
    Baseman

    Maybe what you called AppMenu is labeled differently as I cannot find that. And yes, the menu bar is visible. And the help menu only lists Help Contents, Troubleshooting Information, What's New, Release Notes, Restart With Add-ons disables, & About Thunderbird.
    If I click Tools, then Options, then Advanced I see the Update tab. In this tab is where one should find a button labeled 'check for updates'. I do not see that. My only options are:
    - Automatically Check For Updates
    ---Thunderbird
    ---Installed Add-ons
    -When Updates To Thunderbird Are Found
    ---Ask Me What I Want To Do
    ---Automatically Download And Install The Update
    -----Warn Me If This Will Disable Any Of My Add-ons
    "Show Update History" button
    -Use Background Service To Install Updates
    I've attached a screen shot of this menu

  • Create Track in NWDI in the specific Namespace

    Hi,
    Can somebody send some documents for how to create a development track in a specific name space?
    Thanks and Regards,
    Arya

    Arya,
    check this
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03cd0f1-77c7-2b10-8093-de20e973c3fb
    Thanks
    Bala Duvvuri

  • I just purchased my Ipad 2 64g. the main reason i purchased was to use in my airplane for live gps tracking. i have downloaded the software with the moving map and the gps will not connect in the air. it works periodically while standing outside. Any sug?

    I just purchased my Ipad 2 64g. The main reason I purchased was to use the gps moving map feature. I have the paid AP but the gps does not work. Do I need an auxiliarry GPS?

    Is it just the wireless 64g, or the one with 3G?  If just wireless, you purchased the wrong one.  Also, if you just wanted GPS tracking, a GPS would have been a cheaper solution, no monthly charges.

  • Why does the image not open in Elements when I opt for Edit in Photoshop Elements 11 from the Photos tab in Aperture?

    With an image in Aperture, when I got Photos one of the options offered is "Edit in Elements Photoshop 11", but although selecting this opens Elements, there is no image and it is necessary to open the image in the normal way from within Elements.  Other plugins, e.g. from Topaz work superbly from within Aperture.  I am puzzled to know the reason, and in particular if there is any setting in either Aperture of Elements that need to be attended to.  I would be very grateful for any suggestions.
    Barry Willcock

    Hi Frank, and many thanks.   I can now get the picture into Elements, and work on it.  However, when I have finished, I save it (giving it another name that I can recognise if the amendments are slight) it puts the file back into the same folder, but I have then to import it into the Aperture library in order to see it back in Aperture.  Not a big problem, but an interesting one.
    Again, many thanks
    Barry

  • Does anyone know the street address for Apple's repair center in Memphis, TN? I sent my 2010 MBP for display problems but didnt write down the FedEx tracking number.

    I was an idiot and lost the tracking number for my package that was goin to Memphis to be fixed and of course the package supposedly still hasn't arrived after being sent 3 day ago an was overnighted.  I'm pretty sure it's goin to Flextronics but for FedEx to track it they need the street address. All I have is the zip code of 38134. Thanks for the help.

    Flextronics:::
    5200 Tradeport Drive  Memphis, TN 38141
    (901) 215-2800

  • How to Create Track in NWDI for CRM ISA 5.0

    hi
    can anyone please suggest me how to create track in NWDI for CRM ISA 5.0 for different archive files which consists of source files like(ex: SAP-SHRAPP.SCA,SAP-SHRWEB.SCA, e.t.c.) and as well as empty source files like(ex: SAP-SHRAPP.SCA,SAP-SHRWEB.SCA, e.t.c.).
    As far as i know SAP does not deliver sources for SCs SAP-JEE,SAP_BUILDT and SAP_JTECHS so we cant have them as "Developed Software Components" when we eg:want to modify the SCs SAP-SHRAPP.SCA or CUSTCRMPRJ.SCA.
    here what i want to know is depending on which SCs we actually want to modify, based on that our track want to be Configured differently.
    My question is how to configure the Track in NWDI for this kind of scenario.
    If the source is not given and only required software components are given then how to create track in NWDI. for example in CRM ISA 5.0
    Regards,
    Chandra.

    SAP documentation is there in service market place for NWDI setup under netweaver. If you dont find document post your email id, I will send you the document.
    regards,
    Laxman

  • Error While Creating Runtime Systems on an Existing Track in NWDI

    Hi,
    There is already a track in NWDI with No runtime Systems.
    I have to create the RunTime Systems to do development on this track.
    When I try to select the Development checkbox in Runtime systems,
    select configure  without wizard, Gave   Deploy Host name: **********.com
                Deploy Port :50018  (SDM port)
               Deploy PSWD:  SDM Pswd
    It gives me a warning..
    Synchronization of Runtime System triggered for system dev. Log can be found at
    http://*****************************LogViewer?LogName=%2Fsapmnt%2FEPQ%2Fglobal%2FTCS%2FLOG%2FEPQ_WHRBD_D2010081322030045.log&Bsname=EPQ_WHRBD_D
    When i go to the  log file
    I see this Error Message
    20100813180502 Info   :cannot create a connection for the buildspace:  EPQ_WHRBD_D //connect to deploy tool failed:Server <Host Name> did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to <Host name> at port 50018: Connection timed out:could be due to invalid address
    Can you please tell me what could be the Reason.
    Basis has already opened the Ports : http port and SDM Port.
    I am able to ping the server from cmd prompt.
    Points will be allocated for the answer.
    Thanks.
    Venkat

    Hi,
    There's no need to update CMS or to check whether the buildspace is open, do not click on JSPM flag (unless you need nwdi control at upgrade)...
    The error message means only that from the host where you configure the RTS the SDM cannot be reached or logon request cannot be accepted.
    This can be either , because the
    - SDM password is wrong (you checked it already)
    - the port is wrong (you also checked it. If this is really a 700 RTS, i.e. it has SDM, and the instance number is 00, then the port is really 50018, so this should be fine as well. Only mention, because as of 71X we use the P4 port 5<xx>04 for the deploy controller, as there's no more SDM). Still you can use "netstat -a" to see the status of the ports.
    - The host is wrong. I agree with Dao, check not only FQDN, but also IP address.
    Using this guide you can always check whether the entered data is correct:
    http://wiki.sdn.sap.com/wiki/display/TechTSG/%28NWDI%29%28CMS%29Q0002
    Best regards,
    Ervin (http://wiki.sdn.sap.com/wiki/display/TechTSG/%28NWDI%29Home)

  • Steps for creation of track

    Hi Experts,
    Kindly tell me the steps for creating track in NWDI.
    Thanks in advance!
    Regards

    Hello,
    If you just begin work on NWIDI, here is a good tutorial
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d2/4551421705be30e10000000a155106/content.htm
    and here is the details and example to create a track:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d2/4551421705be30e10000000a155106/frameset.htm
    Hope this hleps you.
    Regards,
    Thunder

  • DC Creation Problem in MSS track in NWDI

    Hi all,
                I have created a Development Configuration in my studio and can see all the MSS DCs, create a local project, check out the existing DCs in the Track etc.. I have NWDI administrator access and can also log into CMS and DTR. But when I tried to create a new DC (For a brand new custom development) in the MSS Software Component of the same track, I am getting "DC creatin failed error". Can any one suggest me what are the permissions I need to have to create a new DC and if any setting needed in CMS or DTR. Any pointers will be highly appriciated.
    Regards
    Ramesh.

    HI,
    Apart from Administrator, you must have NWDI developer role assigned to your user.
    Regards,
    Satya.

  • CBS generating and compiling on 7.31 for 7.0 track

    Hi  NWDI experts
    My NWDI is based on 7.0 hosts both JDK1.4 and 1.6 for 7.0 and 7.3 tracks respectively.
    But the CBS is generating and building 7.31 code and giving errors for a 7.0 track.
    The Build Variant , CBS Visual Admin settings for both JDKs and Track Dependencies are looking fine. But I am not sure why CBS is generating 7.31 code and giving compile time issues for the track DCs.. may I know how can we fix these issues?
    When I check the build log in CBS , it seems it is using WD Plugin version 7.30 SP1 to generate the source code for WD project and giving compile time issues.
    Build Plugin 'WebdynproPlugin', Version 7.30 SP 1 (NW731CORE_01_REL, built on 2011-09-17 17:11:55 +0200, CL155733)

    Hi Ervin,
    I checked the track's dependencies in Development and Consolidation tabs, I found that one of our team imported a Dependency (EP_BUILDT/) with 7.31 for this 7.0 track and I am thinking thats why all the DCs are failing to build.
    The track was working fine 3 months back and this 7.31 dependency (EP_BUILDT/)was imported in March.
    Could you please let me know , how can I delete this 7.31 dependency (EP_BUILDT/)?
    I am trying to import 7.0 version of the same, but it is giving error that already the higher version is imported.
    Component (Vendor/Name/Location/Counter sap.com/EP_BUILDT/SAP AG/20090815234300) specified in the file (/usr/sap/xxx/CMS/inbox/EPBUILDT20_0-10003786.SCA) has already been imported into the system (Domain/Name xx/xxxxx_D) in a higher version.

  • Enhance Tuning to a Key for a Single Track

    I am looking to enhance the tuning for a single track but when I go to enhance one track it enhances the tuning for all the tracks. Does anyone know of a way to just enhance the tuning for a single track? Or maybe a way to just export one track out of several?
    Thanks

    Well I'm just calling it what Garageband is calling it. At the top it says "Garageband, File, Edit, and then Track. Where you can add, delete, and duplicate a track. When you select "Create New Track" you then can choose from Software Instrument, Real Instrument, or Electric Guitar. I think you are thinking of a Track as a Project. When you first start Garageband the top one says _*New Project*_ and the bottom one says _*Recent Projects*_.
    And I know you can move it to a New Project. I was muting all the other Tracks in a project except for the one that I wanted in a certain key and then I exported it to iTunes and then stuck it right back in as a song. So I know how to do it that way but I was wondering if there was an easier way where I didn't need to export and import tracks all the time.

Maybe you are looking for

  • Credit block should not require for Credit card paid sales order

    Dear friends, my client want that sales oder with credit card payment should not block sales order for credit management reasons. Hoe can it be configured. Regards rdc

  • Logical Port Problem using a Web Service

    Hi. I have created a simple web service and imported the model succesfully into my webdynpro component. However, when I execute the web service method, I just get the following error:      "Logical Ports loading problem. Parser error." I'm new to NWD

  • Why do re-downloaded purchases have different  file sizes ?

    Hi, I re-downloaded my iTunes purchases again this year onto the same PC. I was quite surprised that the filesizes were not exactly the same as the first time in 2013 - I would have expected a movie or TV programme to have a specific size.  What is c

  • UME authorization on object level

    Hi, I understand the concept of roles / actions / permissions in the UME, but this only means you have a permission or you don't have a permission. What if (and thats the common case in my mind) I need object level permissions, like I have a hierarch

  • Dust bunnies on the cam sensor. Can't find a Clone Tool in Aperture....??

    My Canon 5D takes incredible shots, but I often have to deal with some "Dust Bunnies", when shooting in very arid/windy locations. I can not locate a tool in Aperture that allows me to clone these out. Does a Clone tool exist?