Conflict of visa32.dll, since update to Labview 8.0 conflict with TEK software

We are Tektronix customers and with Labview
7.1/MAX everything was working ok with their software to communicate
with the oscilloscope from the PC. However, since upgrading to Labview
8.0 on system startup (XP) we get a message:
>
>"Tekvis.3
>
>The iInstalled visa32.dll is not a Tektronix
version of VISA. Either disable this program by removing it from the
startup directory of re-install TEKVISA."
>
>Obviously we would like to carry on using
Labview 8.0 and MAX, but also the Textronix software to grab
oscilloscope measurements without having to swap between these two file
versions. I re-installed Tektronix software but then MAX stopped working
from the NI suite, hence no devices could be seen. I presume that NI
will not be re-writing their new visa32.dll file to be backwards
compatible, will Tektronix be releasing a newer version of the software
that can use the new visa32.dll file? Or perhaps a visa32.dll file
compatible with MAX etc?
I have contacted Tektronix but I got this: "Unfortunately I only have LV 7.1 and, like you, it seems to work fine
for me. A collegue of mine tried this out with abview 8 and didn't seem
to have any problems. Have you contacted NI regarding why TekVisa works
with Labview 7.1 but not version 8?
>Hope you can help,
>
>Best regards,
>
>
>Daniel Hill

Hi DaniBCN
What versions of software are you using? LabVIEW 8 but what about NI-VISA? . You can download the lastest versions from ww.ni.com/downloads.
What scope are you using? What bus (GPIB, ENET, USB)? Here is a great resource to comunicate with tek scopes
http://digital.ni.com/public.nsf/websearch/202E14463D2D819F86256C39005D7828?OpenDocument
I know NI has a great relationship with tektronics (tek has a LV version inside the open scopes, NI has develop a specific version of SignalExpress for Tek scopes)
Hope it helps.
Javier Gutiérrez
NI Aplication Engineering

Similar Messages

Since updating my iPad and iPhone to the new software iOS6, my wifi has not been working properly I'm either getting a very week signal or the signal is dropping completely,

Since updating my iPad and iPhone to the new software iOS6, my wifi has not been working properly I'm either getting a very week signal or the signal is dropping completely. Has anyone noticed this?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
Try This - Renew IP Address:
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Didn't answer security questions, since update cannot access my itunes account with password

Since we updated my mother's ipad, she cannot access her itunes account. It wants her to answer two security questions, which we didn't do when we set it up. Also I put in all the info and it didn't recognize her birthday, which I know we put in right when we set up her account.

Click here and request assistance.
(75573)

Error updating to itunes 10.5.3 with Apple Software Update

I am getting an error message when I try update my Itunes to ver 10.5.3 through Apple Software Update. Any ideas how to fix this and not lose my iphone backup? My iphone was restored at the genius bar yesterday and is blank now.I need to reload my backup onto my iphone but can't do that until I have iTunes ver 10 or later.
If I download it manually and run the install will I lose my itunes files inluding all my backed up data, Contacts, photos etc?

I am getting an error message when I try update my Itunes to ver 10.5.3 through Apple Software Update.
What does the error message say? (Precise text, please.)

Since updating blackberry app world facebook app wont work

since i updated my blackberry app world my facebook app wont work? any ideas why?

Since updating AppWorld has nothing to do with the Facebook app there is no way to know why your Facebook app won't work. Did you update anything else after updating Appworld? Do you have a BB data plan on your account? This isn't always necessary any more but either wifi or some type of data plan is required for the apps to work..
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Since updating iPhone 4 to iOS5, cannot make/receive calls

Since updating to iOS5, I have problems with calling and receiving calls, incuding sending and receiving text messages. Those who try to call me say my phone rings but I do not hear or see anything, my phone is just on homescreen. Can anyone help?????

Hello;
After I have updated to IOS5 my 3GS which always worked very well has been a hassle.
All in the phone works exept that I can't make calls - can you believe m frustration of having a phone wich does-it all exept make/receive phone calls :-(((((
After the update was working fine for a few days. Suddenly after many of my friends told me that always when they call me the calls goes to no where - then I've tried to mke a phone call and guess what..."call failed" message - I have tried all:
I have already restored to factory settings - it doesn't worked
I have re-installed the update (IOS5) - it doesn't worked
I have tried a few tricks I read in another forum (turned-off 3G, turned-off location services, turned-off call waiting, turned-off wi-fi, I have reset network settings a hundred times)I have set manually date&time,) I have tried all things which I believe aren't related to the probelm and nothing works
I have change the SIM card to other operators and - IT DOESN'T WORK...!
I have even done the DFU restore... nothing..!!
I can't express my frustration.... I am an apple lover as I have all gadgets but what is the sense if I can't get help in this issue so basic as phone making phone calls...! I have called customer service and they have no idea what is the problem...!!
please somebody help me...!!!
Cheers..!

Since updating to 10.4 getting error message on startup 'AppleSyncNotifier.exe – Entry Point Not Found, The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'. How do I fix this annoying problem?

Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belle

This is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him.

Unable to print PDF files since update. Get "prop res DLL not loaded" message

Unable to print PDF files since update. Get "prop res DLL not loaded" message

This problem has been reported to occur with certain Lexmark and Dell printers. These printers include the following:
Lexmark Z700-P700
Lexmark X1180
Lexmark X1170
Lexmark X1150
Lexmark P706
Lexmark Z25
Dell A940 (Personal All-in-One)
Microsoft has several possible solutions here
http://support.microsoft.com/kb/918730

Premiere Pro random crashing since update to 2014.2

Been working on the SAME big project over 18 months, in Pr Pro CC, 2014, working on the SAME PC:
Win 7 SP1 pro 64bit, i7-3770K, 32GB fast memory (25.7 available for Pr), Intel HD 4000 graphics on Asus motherboard with 30" NEC Multisync screen at 2560 x 1600 (same as for years)
42GB free on my SSD drive C: and 54GB free on my SSD drive S: for preview files, 24GB free on my SSD drive T: for caching files. Project files etc stored on a normal hard drive F: (for Files!) 1.25TB free.
NOW last update to 2014.2 and I get constant RANDOM crashes (Windows encountered a fault and had to close this program) despite updating graphics driver and trying different settings in preferences, use mercury etc. No particular action causes it - sometimes I am just watching it play a sequence and it just stops. Though of course it may be rendering the last edit at the time.
Sometimes it runs for all of 15 mins and I think the problem has sorted then it goes again and I have to restart the project, find where I was and re-do my last edits. If I remember to press Ctrl-S very frequently (every few seconds) it seems to run for a while then I forget for 5 mins and it crashes.
Grrrr what did you do to the latest version, Adobe?? I need to get this project finally finished in a hurry.... I wish I had not updated the program! Of course I cannot go back as it says the saved copy is now incompatible with earlier Pr Pro versions.
I then tried running a previous version at the same time, as simonray suggested in his post - it worked! So I am able to continue as normal provided I do this stupid bodge fix.
So it really is down to Adobe as it is the same project, same PC, just different version update. You did something to a great, stable, program that made it unstable, Adobe...
To ANSWER RAMEEZ from previous thread:
A variety of issues can cause PPRO to crash:
a problem with the Preferences, or some other pref-related file in the Profile-<USERNAME> bin. >> DIDN'T CHANGE ANYTHING since 1½ years running previous PrPro versions on SAME PROJECT on SAME PC
the graphics driver Checked for latest version - didn't stop the crashing
third-party plug-ins - don't have any
a problem with the cache files. I am using the same 2 x SSD I have been using for years for autosave and caching. 54GB free space / 24GB free space (current cache in place)
a problem with the project file (if you're loading a project...) Doesn't apply
the Preferences files be set to read-only How would that happen? Never happened before on any other update and I can change it.
the user not having administrator rights Only one user on PC since installation, full rights
a conflict/incompatibility with some OS setting Haven't changed anything
a problem on the licensing/authentication side. I'm signed up to full Adobe CC. Everything else works, Ps, Lr, Id ...
A log file might help identify the cause of the crash. Please right-click 'My Computer', select "Manage," look under 'Event Viewer->Windows Logs->Application' to see if there's an event there from Premiere Pro. If so, copy the contents of that log and paste them here.
>>>>>>>>>>>>>>
Faulting application name: Adobe Premiere Pro.exe, version: 8.2.0.65, time stamp: 0x5486db4a
Faulting module name: VideoFilterHost.dll, version: 8.2.0.65, time stamp: 0x5486bf85
Exception code: 0xc0000005
Fault offset: 0x000000000006d692
Faulting process id: 0x19d0
Faulting application start time: 0x01d022d29c3e2d43
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
Faulting module path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\VideoFilterHost.dll
Report Id: 1097ced4-8ec8-11e4-aaaf-08606e6e6383
<<<<<<<<<<<<<<<
Thanks,
Rameez

Problem Solved! (with a small catch)
While searching crashing issues I came across this thread,"Premiere Pro random crashing since update to 2014.2"
Marc_Lec Answered (and I paraphrase here)"...I had the same problem and this is what I did. In 'Preferences Memory' I increased the memory reserved for other application to at least half the installed and changed the optimize render from 'performance' to 'memory."
Thank You Marc_Lec for what has been a game changer for me since my last computer and the beginning of PremiereCC problems.
I changed my Memory reserved for Other Applications from the default 7gigs to 1/2 of my approx.31 available Gigs = 16Gigs. Viola!
No more crashing what-so-ever!
I still have to purchase an older GTX 980 graphics card to take advantage of Adobe's approved code to utilize X=Cuda Cores and GPU, but I think I'll hang onto my new TitanX, in hopes that Adobe will write code and approve it someday in the near future.
Now why doesn't Adobe say this officially about Memory Settings? (I don't know maybe they do and I missed I somewhere)
Mine and probably many peoples computers problems here on this board may be attributed to a simple Memory adjustment, because the computer needs more than 7Gigs to run itself, not to mention Premiere.

Ordinal 215 could not be located in dynamic link library VISA32.dll

I posted this in the hardware forums, but haven't got a respond yet, so I'm trying it here.
I'm trying to recompile code that was developed
in LabView 6.0 to LabView8.2. When I attempt to run the code, I get
the following error message:
"The ordinal 215 could not be located in the dynamic link library VISA32.dll".
This error seems to pop up whenever I make a call to the any of
the VXI vi. Currently, we have NI-VXI 3.3.1 and VISA 4.0 installed,
and we have a MXI-2 PCI card installed in the PC. The precompiled
version of the LabVIEW 6.0 code works on the same PC.
Thanks in advance

What version of the visa32.dll do you have including the sub version?
Routines in Dll's are usually referenced either by ordinal position or routine name. This error is implying that
the routine that was located at ordinal 215 at one time, is not available in the visa32.dll you are using right now at the same ordinal position.
I looked in my visa32.dll and in my ordinal position 215, I have a routine called, viAssertIntrSignal which would imply some sort of error condition handler.
My visa32.dll version is 4.0.0.49152. I was curious what sub version you are running since you said you are running v4.0.

Including visa32.dll without installing the complete Pci-MXI cd

Hi,
I have an application made in Borland C Builder 6. this application inculudes some visa function.
Therefore I need the visa32.dll and NiViSv32.dll in my project.
Because i am developing the application in my room and not in the Lab where we have the VXI Rack, then i don't want to install the CD you deliver call PCI_MXI-2/VXI because there is no need. The problem is that i can't run the program without installing the software in the mentioned CD.Why can't I run my application only using the visa32.dll and NiViSv32.dll.
May be you can tell me if i am missing another file that is deliver with the CD.
Thanks
Yair.

Yari - I had the same problem (using MS VS C++). Older versions of visa32.dll (up to the last year or two) also had another dll named NiViIO32.dll in addition to NiViSv32.dll. These three dlls did exactly what you want. The latest visa32.dll doesn't use (depend on) NiViIO32.dll and instead depends on the VISA package. Your best bet (and what I did) is to download the VISA run-time engine (go to ni.com, select "Drivers and Updates" under "Technical Support, and then select the "VISA" Product Line, "VISA Run Time Engine" Software and the VISA Software Version and Operating System you use). It's a lot better than loading the full VISA system and MAX.
Hope this helps,
Ed Perkins
Honeywell Int'l.

MAX says visa32.dll not found in WINNT\system32 directory. File is there, have reinstalled and rebooted just to be sure. Same error.

MAX says visa32.dll not found in WINNT\system32 directory. File is there, have reinstalled and rebooted just to be sure. Same error. Why?

Hi,
What version of VISA are you using? What version of MAX?. What OS are you using?
You can try using the lastest version, NI-VISA 3.0. The installer also includes the lastest version of MAX (3.0). The installer can be found in the Driver and Updates >> NI-VISA
DiegoF
National Instruments.

Can not install JRE since Update 23 on Windows 7 x64

There's something different with JRE since update 23. I can install until update 22 just fine, but update 23 and 24 just does not install. I always install with offline installer. I have the error from event manager
Registo de falhas 1729745976, tipo 5
Nome do Evento: BEX
Resposta: Não disponível
ID do CAB: 0
Assinatura do problema:
P1: jre-6u24-windows-i586.exe
P2: 6.0.240.7
P3: 4d4a6389
P4: StackHash_b5a0
P5: 0.0.0.0
P6: 00000000
P7: 01520c18
P8: c0000005
P9: 00000008
P10:
Ficheiros anexados:
C:\Users\David\AppData\Local\Temp\WER594C.tmp.WERInternalMetadata.xml
Estes ficheiros poderão estar disponíveis aqui:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_jre-6u24-windows_bd6be64fa1149bd9c119e67bb41fa19c1f651ab_17aa7390
Símbolo de análise:
A procurar novamente solução: 0
ID do Relatório: 841a01be-3ac1-11e0-b844-001fd09a9b10
Estado do Relatório: 0
I have uploaded the report to: http://www.mediafire.com/?1nb7v5dc1hodgf8

Reviewing the preceding posts, I saw the suggestion to remove a java folder in c:"Program Files ..."
Imagine my surprise to discover that there was such a folder on my system after my uninstalls of java using Revo Uninstaller.
There were also java executables in the windows, System32, SysWOW64 subfolders.
After I again uninstalled the jdk 64 bit, I deleted all folders that seemed to contain java
When I reinstalled jdk 64 update 24 to c:\s\java, I was again not asked where to install the jre.
Inspecting the folder tree at c:\s\java I can see c:\s\java\jre but no folder c:\s\java\jre6
However, after this install I am able to execute the java command without seeing an error.
I don't think I'm fully functional yet because an attempt to start eclipse 3.6 (Helios) gives an immediate error windows "Failed to load the JNI shared library "c:\s\java\bin\..\jre\bin\server\jvm.dll"
Since the file c:\s\jre\server\jvm.dll does exist, I'll try re-installing eclipse.

Crystal Decisions 2.0 Gdiplus.dll file update

In reference to Microsoft IAVA 2004-A-0015 JPEG Processing GDI+ Buffer Overlow. I am a network security engineer that is responsible for IAVA compliance over large enterprises. My team is having fits with a gdiplus.dll that points to the following path for 200 machines on our network:
C:\Program Files\Common Files\Crystal Decisions\2.0\Bin\gdiplus.dll
My question is, does anyone know if SAP released an update file that doesn't depict as being vulnerable based on the latest Microsoft bulletin that was re-released in concerns to updates in GDI vulnerabilties?
Another concern we had, was renaming this .dll file, is it always registered or just present within the Crystal Decisions path, to where it could cause problems with the software on the asset?
V/R,
Jay

It being a Microsoft DLL, I am not sure why SAP / Business Objects would be releasing an updated file? I'd suggest contacting Microsoft and ask them for details on this dll.
From the directory path, it looks like this pertains to CR 9 (out of support since April of 07). See this for more info:
Business Objects Product Lifecycles [original link is broken]
Now, there are updates available for CR 9, but I don't think I have enough info here to determine if this will help.
Ludek

Track levels automatically max out with midi devices since update

Hello,
Since the last mountain lion update, I've had problems with USB midi inputs via USB on my 2011 MacBook air. Specifically, the volume level on each track will automatically go to the max volume setting and cannot be adjusted if I plug in a midi device.
So if I have one track that is a midi keyboard and another track that is a guitar, the tracks will allow me to play at the volume I set for a few seconds, then the track volume slider will go to max on its own.
Once I unplug the midi device, the track volume goes back to normal.

Hi DaniBCN
What versions of software are you using? LabVIEW 8 but what about NI-VISA? . You can download the lastest versions from ww.ni.com/downloads.
What scope are you using? What bus (GPIB, ENET, USB)? Here is a great resource to comunicate with tek scopes
http://digital.ni.com/public.nsf/websearch/202E14463D2D819F86256C39005D7828?OpenDocument
I know NI has a great relationship with tektronics (tek has a LV version inside the open scopes, NI has develop a specific version of SignalExpress for Tek scopes)
Hope it helps.
Javier Gutiérrez
NI Aplication Engineering

Conflict of visa32.dll​, since update to Labview 8.0 conflict with TEK software

Similar Messages

Maybe you are looking for

Conflict of visa32.dll, since update to Labview 8.0 conflict with TEK software