Conflict with Add-ons while applying Support pack SAPKB62051

I am applying the above support pack and I get a conflict with the Add-on : APPINT.
I have searched OSS and i cannot find any CRTs for this Add-on. I have looged a problem with SAP. However is there anyone who has had this issue and has found an answer ?

Hi,
I know it is there. Either I'm doing something wrong or it is invisible for me. I think the 'search area' depends on version of SAP software installed. I have SAP R/3 Enterprise 4.7 and that's probably the problem.

Similar Messages

  • Issue while apply support pack SAP_BASIS SAPKB70013 -18

    Hi Gurus,
    We have issue while apply support pack to Development system, we have implemented SAPKB70012 pack first and then we have implemented SPAU and saved in Trasport request  . while applying other patch SAPKB70013 -18 in one go system asked us to release SPAU  transport and then we released that transport after that same transport with auotomatic job it has got implemneted to Quality system and then after that we got below error in quality system :-
    The function module "EXTENDED_AUTH_CHECK_FOR_REPS" is called, but
    cannot be found in its function group.
    Error in the ABAP Application Program
    The current ABAP program "SAPLS38E" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Please suggest now both system is not working .
    Regards,
    Jeetendra

    Also you can check object modifications in transaction SE03 looking for request that touched object SAPLS38E.
    Could you please share the syntax error message ?
    Best regards

  • How to apply support pack

    Hi,
    We are going to apply support pack.Currently we are on support pack SAP_HR & EA_HR 27.Can you please guide how we can check dependency while applying support pack 28 & 29.
    Can any one please suggest the method of applying support pack.
    Regards
    Santosh

    To Apply Support packs first up all you need to download the patches. When you have the downloaded the file i.e.. (*.car ) patch file then you can extract and apply it in two ways.
    1. Go to command prompt through cmd (if you are using windows) and go to the folder where you have download these files ( could be in <drive>\downloaded folder\ ) type this command on command prompt without quotes "sapcar -xvf <filename>.sar". Now it will create a folder called EPS and a folder called IN inside EPS. Go to this folder and it will show two extracted files with extension " .att " and " .pat ".  Copy this two files into yours trans\eps\in folder which could be something like <drive>\usr\sap\trans\eps\in folder.Then type spam on your session and navigate to Support Package\Load Package\From Application Server and it will ask for Path confirm it Say " YES"Select the patch imported and double click on it and then click on small truck Icon and it start Import.
    2. Type Spam on session then navigate to  Support Package\Load Package\From FrontEnd \ and Navigate to path where you have downloaded the *.SAR file of Support Pack.Now it will open a popup window and then click on decompress button ( It is front-End process for extracting or decompressing .sar file in .pat and .att extension ) After that click on Display-Define button on right hand side.) Select the BASIS or ABAP patch ( whichever you are applying *) what ever you are after and import it in queue. After that click on Small truck Icon in menu i.e.. (import Queue) and it Starts importing.

  • ERP 6 Enhancement Pack 2 conflict with Add-on AFS 6.0

    I am installing ERP 6 Enhancement Pack 2 in IDES server which ERP 6.0 with add-on AFS 6.0 installed. I ecountered below error on ERP 6 Enhancement Pack 2 conflict with Add-on AFS 6.0 :
    Conflicts Between Add-On P3A V600 and other components
    Component
    Release
    Add-On Piece List
    Information on
    Conflict Resolution
    SAP_APPL
    602
    SAPK-602DDINSAPAPPL
    Unresolvable
    SAPK-602DFINSAPAPPL
    Unresolvable
    SAPK-602DOINSAPAPPL
    Unresolvable
    SAPK-602DRINSAPAPPL
    Unresolvable
    SAPK-602DWINSAPAPPL
    Unresolvable
    SAPK-602DZINSAPAPPL
    Unresolvable
    Pls advise.
    Thanks.
    Edward

    Hi Edward,
    in the Master Guides on http://service.sap.com/erp-inst, we recommend that you check the Add-On compatibity prior to installing the enhancement package. For Add-Ons you might need for instance separate "Conflict Resolutions", and should make sure that these are available. You contact the owner of this Add-On to find out more.
    If this topic is solved for an Add-On, but the issue still persists, it might be a support topic.
    (An Add-On in this sense is anything which you install in addition to the Standard SAP ERP. As the enhancement packages alter SAP ERP, the add-on might need to react. For SAP Add-Ons, this is done with conflict resolution transports)
    regards,
    Andreas R

  • Firefox will no longer open any website, not even a Mozilla support page. Resetting, even with add-ons disabled, has not helped.

    The question explains the whole thing. No web page will open at all, except for the blank Firefox page. Typing in an address, clicking on a site in the history, opening a new tab and working from it - nothing works. I've reset it twice, restarted with add-ons disabled. All with the same result. (I just clicked on the Show Details link at the bottom of this page, and nothing happened.

    hello susnyk, please see [[Fix problems connecting to websites after updating Firefox]] &
    [[Firefox can't load websites but other browsers can]]

  • How to velify applying support packs SAP R/3 46C

    Hi,
    I'm going to implement multiple support packs to our R/3 46C system.
    Patch level will jump up over 10 levels to the latest level.
    My point is the support packs have too many SAP Notes over 2000 to foresee possible impacts to our application area.....
    Can you give me some hints about that from your experience?
    I guess the impacts are confined to our ADD-ON parts (Namespace of Z, Y...). No inpact for SAP default parts.
    Thank you in advance.
    Y.Shirako

    Hello Yuji, below is the answer to yourt questions.
    - Am I correct in assuming that there will not be big problems once corresponding SAP Notes in "Side-effect reports" are appl
    (No problems will happen if support packs are implemeted with all pre requisites are met. From pre requisite i mean suppose for applying HR components you need some basic level of BASIS, Abap components.)
    - I plan to apply support packs via TCD:SPAM. Which time point should I consider SAPU and SPDD, before or after SPAM...?
    (SPAU and SPDD will come during run of SPAM transaction when components are getting patched. That time you can call ADJUST MODIFICATIONS and later after completion of SPAM activity you can ask application team to do SPAU and SPDD which they will do in terms of transport request)
    Hope it addresses your query.
    Regards, Amber S | ITL

  • Experiences - Applying support packs to enhanced SAP Web Dynpro code

    Just thought I might highlight some experiences we've had with applying support packs for XSS. (Reply if you have your own experiences or a proven better way)
    Firstly, we are using Travel within XSS and have some significant developments to get this working globally.  Rightly or wrongly, we added our own DC's within the ESS application area and need to take this into account during support packs.
    As advised by SAP, we have not directly applied the support pack source code to the modified track, but created a separate SPXX track which we manually need to reaply all of our changes.  It dissapoints me that SAP don't recommend doing what the help.sap.com states, but there must be a reason for this (supposedly the meta data tool not yet available in NW04 will address the main reason).
    In order to get our custom DC's from the old track to the new; I needed to add all non-generated objects to an activity, connect SPXX-1 track to the SPXX track and transport all the way through to the approval stage to get it migrated (the connection can be terminated after this is done).  Again - Less than ideal, especially if you accidentally transport a generated file or miss a file.
    Then for all SAP Web Dynpro changes, we've documented all changes to the nth degree and it's at this point we manually reapply the changes - taking into account any SAP changes that may have occurred.
    I hope SAP promotes doing this a better way soon, but here's a process for anyone else needing to do this.
    Regards,
    Matt

    As you stated the system without the context tab is NetWeaver 7.0.  The context tab and the extra wizards were new features in NetWeaver 7.0 Enhancement Package 1.  Your system would have to be updated to this NetWeaver Enhancement Package level in order to have this functionality.

  • How do I restart Firefox with add-ons disabled?

    How do I restart Firefox with add-ons disabled?

    * Start Firefox in Safe Mode by Holding down the SHIFT key while starting Firefox
    * As an alternative method, select "Start -> Run" and enter one of the following in the Windows Run box:
    ** firefox -safe-mode
    ** "C:\Program Files\Mozilla Firefox\firefox.exe" -safe-mode
    -> Firefox Safe Mode window will appear -> DON'T SELECT ANY OPTIONS, just click '''Continue in Safe Mode'''
    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Check and tell if its working.

  • Apply support pack

    Dear Team,
    I want to update all support pack (basis ,abap,App,HR ,SPAM and some  Addon   PI, ST-PI) . I am using ECC 6.0 with Oracle on HP UX.We have 3 System Landscape.How we should apply support pack.I ThinkFirst in QAS .Then I thing Our Functional  user will analyses on function activity in QAS Server. If all is OK .Then I go to DEV and last in PRD.
    But at the time of Support Pack . We should lock all user except My User ID.
    Please explain so that I can apply all patches in my landscape
    Thanks
    Manu

    Hi,
    the role of the solution manager is for the approval of the patches.Unless you approve the patches, you are not able to download paches.
    As you thought of applying the patches in QAS is good idea.Go ahead with that.
    You need to lock the users while applying patches except your id.
    Thanks & Regards,
    Vidyadhar K

  • Is there a way to disable/restrict access to Help Restart with Add-ons Disabled or just to Help altogether?

    I have students who use Help>Restart with Add-ons Disabled to disable add-ons, reset things, and go into Safe Mode. I'd like to be able to disable their ability to do so. Is this possible? I am also using a product called Fortres 101, which is a file security application. I can use it to limit file access to read only or even no access. If there are certain files that Firefox uses to allow access to these options, then maybe I can use these file names and make them read only or no access.

    Note that you would only have to hold down the Shift key while starting Firefox to start in Safe Mode.
    Any restriction added via an extension can easily be bypassed by knowledgeable users.
    See also:
    *http://mike.kaply.com/2012/04/10/customizing-firefox-disabling-safe-mode/
    *http://mike.kaply.com/2013/01/11/disabling-safe-mode-in-firefox-17/

  • DDIC_ACTIVATION ERROR WHILE APPLYING SUPPORT PACKAGE SAPKW35020 IN ECC5.0

    Hi Gurus,
    I am getting error DDIC_ACTIVATION while applying support package(BW) SAPKW35020 in ECC5.0 with MSSQL database in Windows server.
    I am not able to reset the queue, when i tried to reset the queue the system prompting that " cannot reset queue while DDIC_ACTIVATION" phase".
    Can you please help to reset the queue and implementing this support package.
    Thank you,
    Regards,
    Ganesh

    Paste the SPAM log here.
    Regards,
    Nick Loy

  • My charter webmail will NOT load after playing around with add-ons. FREAKING OUT!

    My entire charter webmail page is GREY & BLANK! I don't know what I did but I was playing around with add-ons including AD Block, etc. I have removed anything I added but it is still GREY & BLANK. I can NOT get into my mail. HELP!!!

    I don't think it's your network ...
    Try this...
    From the Safari menu bar top of your screen click Safari > Preferences then select the Privacy tab.
    Click:  Remove All Website Data
    Quit then relaunch Safari to test. If it was a cookies issue, that may help.
    And in case you aren't aware, when you have trouble with sites loading, trying emptying the Safari cache.
    Back to the menu bar, click Safari > Empty Cache
    Or Command + Option + E on your keyboard.
    As for Peer Guardian. Best to avoid third party firewall blockers.
    Your Firewall settings are located in System Preferences > Security & Privacy > Firewall
    Very important to keep your system software up to date. Back to System Preferences > Software Update > Scheduled Check
    Select:  Check for updates.  Best to select Daily from the pop up menu. Then select:  Download updates automatically.
    You'll see a dialog box on the Desktop when there are updates available to be installed.
    These support links may come in handy ..
    Apple - Find Out How - Mac Basics
    Apple - Support - Switch 101
    Apple product tutorials

  • Problem after applying support pack 15

    Hi ,
    I applied Support Pack 15 for SOLMAN 4.00. Every thing went fine , but after that i entered into maintenance optimizer and tried to download a package, then its giving error saying "No Customer numbers in transaction AISUSER". When i click that it gave a popup saying as below:
    Message Number: SOLMAN_SAP_BACKEND016
    Diagnosis
    There are no entries with a customer number in the 'Customer Number' field in the table AISUSER.
    System Response
    You cannot get customer number-specific RFC destinations.
    Procedure
    Maintain these entries manually or start the report
    SMBI_AISUSER_VAR_MIG to copy any existing customer number from the table AISDK_CF_OSS_USR.Please guide me
    Thnaks

    Yes i did the same and when i went to maintenance optimizer it says:
    Message Number: SOLMAN_SAP_BACKEND016
    Diagnosis
    There are no entries with a customer number in the 'Customer Number' field in the table AISUSER.
    System Response
    You cannot get customer number-specific RFC destinations.
    Procedure
    Maintain these entries manually or start the report
    SMBI_AISUSER_VAR_MIG to copy any existing customer number from the table AISDK_CF_OSS_USR.
    Actually for this message i got a note 1140822 in the forums and when im following this note i got the error mentioned earlier (below):
    The RFC-user does not belong to a VAR- or CCC-customer number
    Message no. AI_SC_EN111
    Diagnosis
    The user used in RFC destination SAP-OSS does belong to a simple customer number that is not assigned to a Value Added Reseller or Customer Competence Center in SAP Support Portal.
    Procedure
    You need to maintain your customer numbers manually in table V_AISAPCUSTNOS or choose another user.
    Reply
    I couldnt get much information for this error though i gave 6 digit in theV_AISAPCUSTNOS and 10 digit in the AISUSER.
    Forward

  • Applying  support Pack in  test mode...

    Hi Guys,
    I need to know can we apply support pack directly on production in test mode?
    If yes, please give me the details of it.
    Thanks in advance.
    Abu

    Hi,
    You can use the test scenario to determine if a modification adjustment is required before the Support Package is actually imported, or if any conflicts need to be resolved before the import. The test scenario does not import data into your SAP system.
    Also please note that there is no test scenario for SPAM/SAINT updates. A SPAM/SAINT import ignores the scenario you select
    Check below link for more details,
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/28/9f33088a7e11d2b423006094b9ea64/frameset.htm
    Thanks,
    Sushil

  • Authorizations  required for applying support packs

    What authorizations do you require for applying support packs?

    After u successfully downloaded the support pack from the service market place , the 1st authorization u need is for using the client 000.
    Only with the client 000 u will be available to import the support pack (ABAP suppotr package) using transaction SPAM. To use all SPAM functions, you require the following authorizations:
    S_TRANSPRT
    S_CTS_ADMIN
    If you log on in client 000, then your user master data contains the corresponding authorizations (inside the authorization profile) and you can use all the functions in Support Package Manager.
    For Java u can use jspm tool for applying the support packages for any component and if u want to enhance or upgrade the java components( say from ESS 1.1 to ESS 1.2) then u can do it using sdm tool.
    Before applying the pack u need to unpack the abap/java files using the commands in the command- prompt and copy the unpacked files into sap/sid/trans/eps/in folders of ur system.
    Also before using the SPAM for abap support pack make sure that u had set ur system as the domain-controller in transaction stms with ddic user and masterpwd.
    Go thru this document:-
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7a2e4346-0a01-0010-718a-fa846ad19716
    Award points if found helpful

Maybe you are looking for