Conflict with Aisquared ZoomText, scolling breaks up text

Recently my technician switched me to Mozilla Firefox & Thunderbird. I am 88 and only have low vision with Macular Degeneration. To use the computer I have to use a text magnifier. The one I use is ZoomText from AiSquared in Manchester Center VT. Currently they do not support Mozilla even thoughI have repeatedly contacted them.
The problem is that when I scroll in any application the text breaks up and becomes unreadable which is annoying to say the least. Would you please contact them and see if you can resolve this problem. [email protected]
I was switched from IE because of problems and would prefer no to go back to it.
In SW Ontario, Canada

Dear harrovian,
Andrew and cor-el have suggested a nice add on feature and how to turn off hardware acceleration. Aisquared has instructions how to achieve this as well [http://www.aisquared.com/knowledge_base/more/zoomtext_with_firefox_4_and_up_loss_of_xfont/]
I was looking at some built in zoom animation that is also in Firefox that can be turned off from the about:config page as well.
The feature is called "browser.panorama.animate_zoom" The other feature that is built in controls the incremental values for the zoom feature that Andrew provided help for. Currently the default values are at .3,.5,.67,.8,.9,1,1.1,1.2,1.33,1.5,1.7,2,2.4,3, and you can edit them from the about config page or use this add on to change these values:
[https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/]
There are some other features as well that may be helpful. There is a find as you type option that will search the page as you start to type. More information can be found here at this link: [http://kb.mozillazine.org/Accessibility.typeaheadfind]
I also have a last resort alternative to suggest. There are other open source software that also have zoom features such as [http://magnifier.sourceforge.net/ Virtual Magnifying Glass 3.6] and [http://technet.microsoft.com/en-us/sysinternals/bb897434 Zoomit 4.5]
Forgive my tangents, if you need anymore help, we are happy to.
Rachel

Similar Messages

HOW to Adapt forms with jaws,Zoomtext-VERY VERY URGENT

Hi All,
Can anyone tell me about adapting oracle forms/applications to use with JAWS,ZOOMTEXT or Speech to text software.
I appreciate an early response.
Thanks

Hi Deepthi,
1. Can anyone suggest me how to do the testing
A) Like message monitoring in RWB we have a particular link to monitor the message through differnt seeburger adapter.
I dont remember the link right now.
2. Where to monitor for AS2 messges?
A) Through the same link.
3. How to see the our output files whether we are sending the correct files or not?
A) u mean to check the output file data or strucutre if strucutre is not proper then u will get the error message and ur mapping fails.
4. Outbound -- How we will come to know whether file reached to partner or not?If we set sync Mdn.. where we can see the MDN..?
I have no idea.
5. Inbound-- How we will come to know whether file has sent to us or not?
File is sent over wan so when it will be pickd up by XI.
Thnx
Chirag

Text editing bug: conflict with Facebook widget

And just when I thought this program couldn't be MORE frustrating. The simplest of text editing features flatly refused to cooperate. Double click, triple click, with the direct selection tool selected. Nope won't select a goddam thing. Turned out to be a conflict with a Facebook widget I had applied on a master page.
ATTN: bug department!

Thank you so much for replying.
Yes I have removed and reinstalled WMP.
I had good results with the PD6 application installed on the default path onto the C: drive with the one exception that if the application was launched by accident and the user data path was not available, the PD6 application would blow away my custom user path registry settings. Now that I know what they are I have made a .reg file to repair my registry to my desired user data paths.
Installing the application on the removable drive appeared to help prevent me from launching the application by accident and overwriting my registry with default user paths.
So which is the less of the two evils?
If the application directory is not available, windows media player still tries to launch the .msi for installing PD6.
If I install the application to the C: drive but the user data to the removable drive, launching the PD6 application without the user data drive will still corrupt my registry settings for a user data path.
Both these issues seem like a logical (if not easy) fix that should be done in the PD6 application and installation package. I mean really, cannot anyone tell me why windows media player is checking the PD6 application directory? Why in PD4 did we have an option control for setting the user data path from the PD4 application? Why is this option not in the PD6 application, just the installer?
I am given a choice during installation to move the user data to another non default location. Why else would this be provided if not to accommodate my kind of request to store the user data into an alternate location other than “My Document”. Certainly Palm is not trying to force the users on how to protect and store their personal data?
Post relates to: Centro (Verizon)

Is there a conflict with Mountain Lion and ATT air card?

I have an ATT USBconnect Momentum 4G air card. Ever since I installed Mountain Lion I am getting an error message that says that something is trying to modify the configuration. Is there a conflict with Mountain Lion and the ATT 4G air card? If so, is there something I can do about it? Thanks!

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Flash Player 10 does not work in IE or Firefox. What could it conflict with?

I'm using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash. Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything. I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
Yup. Nothing. When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option. I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
Flash 10i.ocx (10.1.82.76)
FlashUtil10i_ActiveX (10.1.82.76)
FlashUntil10i_Plugin (10.1.82.76)
genuinst (6.0.2800.1531)
FlashUtil10i_ActiveX.dll (10.1.82.76)
NPSWF32.dll (10.1.82.76)
KB931433
FlashInstall
Install
Flashplayer.xpt
When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled. I even enabled the other Adobe add-ons for Acrobat and such just to be sure. Firefox shows Shockwave Flash and Shockwave for Director both to be enabled. The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website. I have DirectX 9.0c installed and everything else works fine. I can play audio and video elsewhere with no problems. It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
Any ideas?

Well, great. I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it. No such luck. The video still plays, but no sound.
All the sound settings are working with everything else from games to media players. I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
In the Flash folder, I now have:
Flash10l.ocx (10.1.102.64)
Flash Util10l_ActiveX (10.1.102.64)
FlashUtil10l_Plugin (10.1.102.64)
Genuinst (6.0.2800.1531)
FlashUtil10l_ActiveX.dll (10.1.102.64)
NPSWF32.dll (10.1.102.64)
And the setup and text files that went with 'em.
I've also done a system restart since then and zip.
I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go. The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
Now what? I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
Date: Sun, 14 Nov 2010 17:37:07 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
>

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome. Works in IE. This is my first time trying to post a question - so please be kind. I am also not good with code and am finding css a real challenge after learning to design based on tables. I'm using CS5.
The "test" page with the slide show is: http://www.reardanwa.com/index-slides.html   The same page without the slide show is http://www.reardanwa.com/
I realize the images are not ideally sized - I'll fix those once I get the pages to function. Maybe I need a different slide show? I would prefer a widget that I can modify to required size & postition. Again - I'm not good at building with code from scratch.
The problem is the naviagation links that are directly next to the slide show do not work in Firefox of Chrome. They do work in IE.
I've read about using jQuery.noConflict(); code but can't figure out the correct way to use it in my case or whether that's even part of the solution. I know my code is not well organized as I have cobbled together from various sources in an attempt to format the page the way the client wants it. Also, FYI, I will eventually try to make the page work in Surreal CMS.
I've spent sevaral days over the last several weeks trying to solve sth slide show/navigation conflict - so any specific light you can shed will be much appreciated.
Thanks in advance.
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Reardan Area Chamber of Commerce</title>
<meta name="description" content="home page for Reardan Area Chamber of Commerce" />
<meta name="keywords" content="Reardan WA, chamber of commerce" </>
<script src="scripts/jquery-1.6.min.js" type="text/javascript"></script>
<script src="scripts/jquery.cycle.all.js" type="text/javascript"> </script>
<script type="text/xml">
</script>
<style type="text/css">
                              #slideshow {
                                  padding: 10px;
                                        margin:0;
                              #slideshow-caption{
                                        padding:0;
                                        margin:0;
                              #slideshow img, #slideshow div {
                                  padding: 10px;
                                  background-color: #EEE;
                                  margin: 0;
body {
          font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
          background: #004B8D;
          margin: 0;
          padding: 0;
          color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
          padding: 0;
          margin: 0;
h1, h2, h3, h4, h5, h6, p {
          margin-top: 0;           /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
           /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
.left
position:absolute;
left:0px;
.center
margin:auto;
width:95%;
.box
          position:relative;
          left:-90px;
          width:950px;
          height:350px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          z-index:1000;
.slide{
    position:absolute;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
          border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
          color: #42413C;
          text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
          color: #6E6C64;
          text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
          text-decoration: none;
/* ~~this fixed width container surrounds the other divs~~ */
.container {
          width: 960px;
          min-height:900px;
          padding:5px 0px 0px 0px;
          background: #E8F8FF;
          margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
          background: #E8F8FF;
          padding:10px 5px 0px 5px;
.sidebar1 {
          float: left;
          width: 225px;
          margin: 60px;
          color: #FFFF0D;
          background: #595FFF;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
    z-index:-1;
.sidebar2 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:2;
.sidebar3 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:3;
.content {
          padding: 0px 0px 0px 0px;
          width: 780px;
          float: left;
          background: #E8F8FF;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
          padding: 0px 15px 5px 10px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
          list-style: none; /* this removes the list marker */
          border-top: 0px solid #FFFF66; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
          margin-bottom: 50px; /* this creates the space between the navigation on the content below */
          font: Arial Black, Verdana, , Helvetica, sans-serif;
          font-size:1.3em;
          font-weight:bold;
          z-index:2;
ul.nav li {
          border-bottom: 0px solid #FFFF66; /* this creates the button separation */
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
          padding: 3px 0px 5px 0px;
          display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
          width: 185px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
          text-decoration: none;
          color: #FFFF0D;
          background: #595FFF;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
          background: #595FFF;
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
          color: #FFFFFF;
/* ~~ The footer ~~ */
.footer {
          padding: 10px 0;
          background: #595FFF;
          color: #FFFF0D;
          position: relative;/* this gives IE6 hasLayout to properly clear */
          clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
          float: right;
          margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
          float: left;
          margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
          clear:both;
          height:0;
          font-size: 1px;
          line-height: 0px;
-->
</style>
</head>
<body>
<div class="container">
<div class="header">
<a href="#"><img src="images/Chamber-Logo-2.gif" alt="Reardan Chamber Logo" width="187" height="163" hspace="10" vspace="5" align="top" /></a><img src="images/Reardan-Chamber-Title.gif" width="476" height="204" alt="Reardan Area Chamber of Commerce, Dedicated to Preserving and Enhancing Area Businesses" /><p></p>
<p style="color: #F00">This Site is under construction! Please pardon our dust as we create!</p>
</div>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="about.html">About Us</a></li>
      <li><a href="history.html">Reardan History</a></li>
      <li><a href="activities.html">Activities</a></li>
      <li><a href="business.html">Business<br />
        Directory</a></li>
      <li><a href="about.html">Join the<br />
        Chamber</a></li>
       <li><a href="links.html">Links<br />
  <span style="font-size: 85%">Tourism</span><br />
      </a></li>
    </ul>
     </div>
<br />
<br />
<br />
<br />
<div class="box" +"slide">
<script type="text/javascript">
// BeginOAWidget_Instance_2559022: #slideshow
                           slideshowAddCaption=true;
$(window).load(function() {
$('#slideshow').cycle({
                    after:                              slideshowOnCycleAfter, //the function that is triggered after each transition
                    autostop:                              false,     // true to end slideshow after X transitions (where X == slide count)
                    fx:                                        'blindX',// name of transition effect
                    pause:                              false,     // true to enable pause on hover
                    randomizeEffects:          true, // valid when multiple effects are used; true to make the effect sequence random
                    speed:                              100, // speed of the transition (any valid fx speed value)
                    sync:                              true,     // true if in/out transitions should occur simultaneously
                    timeout:                    5000, // milliseconds between slide transitions (0 to disable auto advance)
                    fit:                              true,
                    height:                       '300px',
                    width:         '525px'   // container width (if the 'fit' option is true, the slides will be set to this width as well)
function slideshowOnCycleAfter() {
          if (slideshowAddCaption==true){
                              $('#slideshow-caption').html(this.title);
// EndOAWidget_Instance_2559022
</script>
<div id="slideshow">
    
    <img src="images/100_1537.jpeg" width="600" height="450" title="caption for image1" /> <img src="images/Parade-2011-2.jpg" width="300" height="225" title="caption for image2" /> <img src="images/100_1495.jpeg" width="600" height="450" title="caption for image3" />
    <div title="sample title"> Images for slide show will need to be re-sized to fit box to avoid distortion</div>
    <img src="images/beach4.jpg" width="200" height="200" title="caption for image4" /> <img src="images/beach5.jpg" width="200" height="200" title="caption for image5" /> </div>

<div id="slideshow-caption"></div></div>
<div class="sidebar2" "anotherClass editable"><p align="center"><strong>Chamber News</strong><br />
Local News item
<br />
Another New item</p>
<p align="center">lots of news this week<br />
    <br />
    <br />
    <br />
</p>
</div>
<div class="sidebar3" "anotherClass editable"><p align="center"><strong>Upcoming Events</strong></p>
<div align="center">    <a href="activities.html" style="color: #FFFF0D">Community wide yard sales</a><br />
    <br />
    <br />
    <br />
    <br />
</div>
</div>
<div class="content"><br />
<br />
</div>
<div class="footer">
        <p align="center"><span style="font-size: small">Reardan Area Chamber of Commerce</span><br />
          <span style="font-size: x-small">[email protected] - 509.796.2102</span><br />
        </p>
        
</div></body>
</html>

If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
    float: left;
    width: 225px;
    margin: 60px 0px 60px 60px;
    color: #FFFF0D;
    background: #595FFF;
    border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;

Type conflict with ASSIGN in program CL_WD_ADOBE_SERVICES==========CP

I am trying to display an interactive Adobe Form in the webdynpro for abap.
But i'm getting this error:
The following error text was processed in system AED : Type conflict with ASSIGN in program CL_WD_ADOBE_SERVICES==========CP .
The error occurred on application server AIERD_AED_00 and in work process 1 .
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: NODE_2_DDIC of program CL_WD_ADOBE_SERVICES==========CP
Method: DATASOURCE_2_FM_PARAMS of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF_DDIC of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CADOBE==================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CADOBE==================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program CL_WDR_VIEW_ADAPTER===========CP
Is there any problem with some Adobe config or somewhere a mistake in my code.

Follow this thread
[Displaying a Smartform as PDF in WDA;
Thanks
Siva

How can I install an extension when it conflicts with an existing one that doesn't appear in the list of extensions?

I'm trying to install Guide Guide for Photoshop CS 2014 using the Adobe Extension Manager CC but when clicking on the 3.1.2-guideguide.zxp I recieve the following error, "This extension cannot be installed, since it conflicts with a existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in ", then install again." Note that there is some code breaking in there where ", is. When I open Adobe Extension Manager CC there are no extensions listed. None under any of the products to the left. I can't uninstall it if it's not listed.
After reviewing the forums I have gone into my %appdata%\Roaming\Adobe\ folder and removed all folders for previous versions of Adobe Extension Manager.
Any help with this issue would be appreciated. Thank you for your time.

Please delete "C:\ProgramData\Adobe\Extension Manager CC\Configuration\DB\ExMan.db" then retry. Note that "C:\ProgramData" is hidden by default. You can input C:\ProgramData in the address bar of Windows Explorer then press "Enter" key to go into this folder.

Can you put line break in text in the data box when creating a chart. i.e. if you have a bar chart

Can you put line break in text in the data box when creating a chart.
i.e. if you have a bar chart with text underneath each bar, can you break it when you’re entering it instead of manually afterwards
Thanks

http://help.adobe.com/en_US/illustrator/cs/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html
See "Enter labels"

Virt-manager, openbsd-netcat conflicting with gnu-netcat

Hi,
since 2012 there seem to be no more reports about the dependency problem of virt-manager (1.0.1-1) and openbsd-netcat?! Openbsd-netcat is optional but still conflicting with gnu-netcat which is indeed my preferred solution. Is there any solution (beside removing gnu-netcat^^) or maybe I'm missing something?
Thanks and regards

karol wrote:openbsd-netcat provides netcat, I don't know why is virt-manager depending on openbsd-netcat and not on netcat, which would make it trivial to use gnu-netcat.
Considering pkgbuild as well as the output of pacman -Qi it seems to depend on openbsd-netcat. For the needed libvirt it is optional.
karol wrote:Have you tried editing the PKGBUILD of virt-manager?
Since the package is in community repo I wanted to avoid editing pkgbuild, cause for me this was only needed (till now) for building packages from "scratch" or with yaourt.
Interesting for me, there seems to be another version in AUR repo which has not such a direct dep (AUR)?
If I have to edit pkgbuild, than I was wondering if it maybe could break some functions, since to my knowledge openbsd-netcat and gnu-netcat have some different options available?!

Logical breaking of text

Hi guys,
I need a help on a particualar scenario where i have a varchar2 field which can have upto 120 characters. I have
to divide them into three or more and assign each to a variable. One cannot exceed 35 characters. But the
challenge is... not to break a word if it is within an html tag. In the above example the 35th character is 1
which is in </h1>. In this case it should break before the tag begins. That means the first variable should
end at "description" and next variable value should start with </h1>.
Could you please give some insight on how to handle this?
Thanks
<h1>This is a short description</h1><p>This is a product of great value</p>

This way: But you will have to form three such expressions to populate your variables.
with data as
select '<!DOCTYPE html><html lang="en"><head><title>Logical breaking of text | Oracle Forums</title>' col from dual
select col, case when substr(col, -1, 1) in (' ', '>')
              then trim(col)
            else
              substr(col, 1, greatest(instr(col, ' ', -1), instr(col, '>', -1)))
       end col1
from (
        select substr(col, 1, 35) col
          from data
COL                                 COL1
<!DOCTYPE html><html lang="en"><hea <!DOCTYPE html><html lang="en">

Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another.

Hello, I am filtering by date
DATEADD(d,DATEDIFF(d,0,GETDATE()),0), but
doing like below gives me an error
ADODB.Command error '800a0bb9'
Arguments are of the wrong type, are out of acceptable range,
or are in
conflict with one another.
/aa.asp, line 19
line 19 is
Recordset1_cmd.Parameters.Append
Recordset1_cmd.CreateParameter("param1",
135, 1, -1, Recordset1__MMColParam) ' adDBTimeStamp
any one have any idea as to why
grateful for any help
thanks
k
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>

<%
Dim Recordset1__MMColParam
Recordset1__MMColParam =
"DATEADD(dd,DATEDIFF(d,0,GETDATE()),0)"
If (Request("MM_EmptyValue") <> "") Then
Recordset1__MMColParam = Request("MM_EmptyValue")
End If
%>
<%
Dim Recordset1
Dim Recordset1_cmd
Dim Recordset1_numRows
Set Recordset1_cmd = Server.CreateObject ("ADODB.Command")
Recordset1_cmd.ActiveConnection = MM_connpeepeek_STRING
Recordset1_cmd.CommandText = "SELECT usr_image1,
dateimage_usr FROM
diddle.ps_usr_image WHERE dateimage_usr = ?"
Recordset1_cmd.Prepared = true
Recordset1_cmd.Parameters.Append
Recordset1_cmd.CreateParameter("param1",
135, 1, -1, Recordset1__MMColParam) ' adDBTimeStamp
Set Recordset1 = Recordset1_cmd.Execute
Recordset1_numRows = 0
%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
<title>Untitled Document</title>
</head>
<body>
</body>
</html>
<%
Recordset1.Close()
Set Recordset1 = Nothing
%>

Ben,
If dbo.TG_Account is a table in your FDM database, then you should be able to populate the recordset with:
strSQLAcct = "SELECT Account FROM dbo.TG_Account"
Set rsAcct = DW.DataAccess.farsFireHose(strSQLAcct, False)

Breaking up text into multiple fields

The data in a field that I am reading contains something like
this :
Los Angeles, California 99999-0000
What is the technique to break it up into three separate
fields, so that a field name city would contain Los Angeles,
a field name state would contain California, and a field
named zip_code would contain 99999-0000 ?
Thanks for any help.

Is it possible to have each field separated by a comma? Space
delimiters won't work since not all cities & states are one
word (ie. New York, New York) however a comma delimiter would allow
you to use simple list functions to extract the data.
If this isn't possible but the data is always in the format:
city<comma>state<space>zip, then you could extract the
city using comma as the delimiter and then extract the zip code
using the ListLast() function with space as the delimiter which
would leave you with the state as the remaining text. This would
only work however if your data is consistently in the format
described above.
Failing this you could build two tables with states and
cities and then use them to identify valid states and cities and
extract the data that way.
cheers

Khmer Unicode 2.0 font conflict with Adobe suite

I just downloaded Khmer Unicode 2.0. After I did, the Microsoft Word doc that supplied a Khmer translation read correctly. When I tried to copy and paste the Khmer into any Adobe apps (I tried 3, so have concluded it will be true of all) the font moved the letters around, deleted vowels, and generally messed up the phrases. It did it the same way every time I tried new things.
I even tried copying the font into the Adobe FONT folder, and that didn't make any difference. What could be creating this problem... I need to resolve it right away since I am trying to finish a project by the end of today.
I have 3 files to send someone, but don't see an option to attach them here
I am using Windows XP and Adobe Suite CS3
I just found this:
you should already know the answer to this. btw it's not just khmer, it's any
unicode encoded text.
first the usual suspects: what db driver? 100% sure you're using the correct dsn?
then this caught my eye: SET khmerReadWriteTest ='#form.text#'
uh either use cfqueryparam (good practice besides you turned on unicode in the
dsn anyway) or unicode hinting.:
SET khmerReadWriteTest=N'#form.text#'
But I have no idea where you do any of this.... Help please!

Is there a Windows machine on the network? It might be a conflict with non-Unicode symbols fonts used by them.

Avahi conflicts with nss-mdns. [solved]

I'm confused. Went to update today, and got this message:
:: avahi conflicts with nss-mdns. Remove nss-mdns? [Y/n]
I thought 'Fair enough...' but I always check packages like this with -Si to know what's actually happening in my system. Soo, I run:
$ pacman -Si avahi
Repository : extra
Name : avahi
Version : 0.6.6-2
Groups : None
Provides : howl mdnsresponder
Depends On : dbus libcap libdaemon nss-mdns
Conflicts With : howl mdnsresponder
Replaces : None
Size (compressed) : 557952
Description : A multicast/unicast DNS-SD framework
MD5 Sum : 52ec5424dde107d8099637feb3076925
Now, this is why I'm confused. -Si tells me avahi depends on nss-mdns. When I try to install, it tells me they conflict.
So.... which is right?
-=edit=-
Okay, I've found something else out that may be pertinent. Currently, the packages I have for avahi and nss-mdns depend on each other. That is:
$pacman -Si nss-mdns avahi
Name : nss-mdns
Version : 0.7-3
Depends On : avahi
Required By : avahi kdelibs
Name : avahi
Version : 0.6.5-1
Depends On : dbus libcap libdaemon nss-mdns
Required By : nss-mdns
However there are new packages for both avahi and nss-mdns available in the repos. (0.7-4 and 6.6-2 respectively)
The thing is, pacman isn't picking up the new nss-mdns package with a -Syu operation, and gives me that conflicts line... I'm going to try updating nss-mdns first then see if that fixes it.
-=edit again=-
Geez, I hate it when I post something and moments later figure it out myself. The newest versions of nss-mdns and avahi break the dependancy cycle I noted above; that is, nss-mdns no longer depends on avahi. If I manually updated nss-mdns first, pacman now installs avahi with no problem.
I'm wondering, is this worth a bug report? I'm not surprised a cyclic dependancy like that would cause wierd behaviour...

murkus wrote:snip
$ pacman -Si avahi
Repository : extra
Name : avahi
Version : 0.6.6-2
Provides : howl mdnsresponder
Depends On : dbus libcap libdaemon nss-mdns
Conflicts With : howl mdnsresponder
You get that error because they DO conflict. Do you have mdnsresponder installed?
If so, and you want avahi, then you'll have to remove mdnsresponder and install avahi.

Conflict with Aisquared ZoomText, scolling breaks up text

Similar Messages

Maybe you are looking for