Conflict with Hyperion Smartview vs. Microstrategy Office, Version 8.1.1 HF

We have Smartview version 9.1.3.6 installed. Some users are reporting conflicts with Microstrategy Office, Version 8.1.1 HF. Has any one heard of this?

Hi Matt,
I do not have any specifics or error messages. I just wanted to find out from the user community if anyone ran into any issues with having both Add-In's installed (Smartview and MicroStrategy Office).

Similar Messages

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open.

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

MS Excel 2010 takes long to open with Hyperion Smartview 11

Hi,
the MS Excel 2010 takes about 20 sec to open a blank sheet when is with a user without Internet access. It is automatically open with Internet access. This behaviour started after the installation of Hyperion Smartview.
Can you help?
Ant K.

I've never worked with Hyperion Smart view.
But it sounds like the program configured to access the internet and perform an operation, such as check for updates for that program. Since we know this issue may caused by the Hyperion Smart view. If it is an add-in for office, we can try
to disable it to check if excel can open blank worksheet normally, meanwhile, if you want to use this tool, you can enable it. File->options->add-in

SAP BPC and Hyperion SmartView

Hello, Forum u2013
Encountering an issue when trying to use SAP BPC and Hyperion SmartView at the same time and just curious if anyone else is 1) using both programs at the same time and 2) if so, have you encountered any problems?
Here is the scenario:
I have a SAP template file (EvDRE) that is used in conjunction with Hyperion SmartView. The way it works is that the template would extract the numbers out of Hyperion and then send the base numbers to the SAP system.
In order to do this, however, I have to create the connection to the Hyperion database first, which I do using VBA code.
When I execute this code within a blank workbook, I am able to successfully create the connection to Hyperion with no problems.
When I execute the same code within my SAP template, I receive a MS Excel error (u201CExcel has encountered an error and must close programu2026u201D). This has been a consistent result that Iu2019ve received.
Please note that I am not logged into either SAP or Hyperion when I receive this error (this happens outside both systems). I'm worried that as soon as I log into both programs, the whole thing will crash...
So, just curious if anyone out there is encountering the same issue when trying to use both programs.
Please let me know.
Carlo

My suggestion is to attempt to break it into 2 seperate work flows for testing, using 2 seperate templates. One to pull, then copy the data to the second sheet for submission. I would assume that you would have to be connected to initiat eeither the extraction of sending of data using your added code, so seperating the 2 steps may prove useful.
Hope this helps.

Hyperion SmartView for office problem

Hi,
I install hyperion hmf smartview for office 9.2.0.3.0.005 whith the admin right, I used it and can remove it from add in in excel 2003 sp3, but recentely we remove the admin right.
So now I can use it but I cant remove it from the add in in exel, that cause some conflict with other add in
Solution ??
We have Windows XP SP3 and Office pro 2003 SP3.
Thanks

Not a pretty solution, but I have had users manually remove the add in files from the Program directory on the hard drive and then save them on their desktop for when they want to use it again.
I think I have read that the newer version has less trouble with excel functions.

I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after saving as from word 2007 - I uninstalled Pro X1 and now when I save as from word 2007 to PDF it will

Can anyone help with this - do I have to uninstall Reader and then reinstall?

I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after "saving as" from word 2007 - I uninstalled Pro X1 and now when I "save as" PDF from word 2007 to PDF it will save the document as a PDF but will not open the document to display after publishing - I have to got to where the file has been saved to view the new PDF document - this is really annoying - do I have to delete adobe reader and reinstall it - adobe needs to look at this conflict with acrobat pro as I have even gone it to properties and tried to have adobe reader as the default PDF program - the main issue is that I cannot view the PDF after publishing it from word 2007

I have a g4 powerbook 12" 1 gig processor running os 10.3.9 . I have conflicts with anything google. What is the highest os version i can install ?

I have a g4 powerbook 12" 1 gig processor running os 10.3.9 . I have conflicts with anything google. What is the highest os version i can install ?

Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

Version 3 conflict with Flash Drive

Just upgraded to version 3 but resulted in conflict with Kingston flash drive. Firstly, Photoshop Album automatically opens up when you put the flash drive in the USB port (and you can't disable it). Secondly explorer (XP version) no longer recognises the flash drive. Reverted back to version 2 and flash drives worked fine. Adobe know there's an issue but couldn't solve it - anybody got a solution?

Welcome to Apple Support Discussions.
Your machine would probably benefit more from RAM upgrade than a upgrade to an SSD. Go here choose the iMac you have and you might be able to upgrade to 6 GB. The ONLY advantage of an SSD is loading your OS and opening and closing apps. Because Macs are designed to be left on 24/7 except if you are away for few days or longer the first point is moot. That leaves opening and closing apps, unless you are working in apps where you are opening a closing a lot of files all the time a SSD would be a waste of money.
My recommendation, do an SMC and PRAM reset and see how it operates and if you still aren't satisfied upgrade to 6GB of RAM.
Roger

FDM 9 version compatibility with Hyperion 11.1.1.3

Hi ,
Can anyone let me know if FDM 9 version is compatible with Hyperion 11.1.1.3 verson ?
Thanks

No, it is only compatible with HFM releases up to 11.1.1. You will need to upgrade to FDM 11.1.1.3

Which Ms office version works with BPC 5.1 sp3

Hello, just as the subject says which office versions runs with BPC 5.1 sp3?
Best Regards
Jojo

There are some issues with BPC 5.1 and Office 2007. Some that I've experienced (I believe we're also on SP3)....
You have to be careful when saving reports and input templates in BPC for Excel - make sure they are saved in the 2003 version, not 2007.
Also, if you have Excel 2007 and you maintain dimension members within the BPC Admin console, you have to save the changes, get out of the member sheet, then go back into the member sheet and process the dimension. If you try to process right after saving, you get an error. But if you back out of the member sheet between the save and process, then the process works just fine.
Search OSS for Search term Office 2007 and Application area EPM-BPC*to find additional information regarding BPC and Office 2007.

Unable to open Aperture 2 because it is apparently in conflict with an old trial version 3. Any tips how to solve this?

I am unable to open my Aperture2.
The following warning message shows on top of the ususl opening window:
Quote
The libraryin "users/pedro/pictures/Aperture 3 Trial Library2.aplibrary" cannot be loaded because it is from newer version of Aperture.
Unquote
It looks like some kind of conflict with an old trial version 3, to which I never upgraded.
Any tips to help me solving the issue?

Do you need to run Aperture 2, or do you need to open the "Aperture 3 Trial Library2.aplibrary"?
If you only want to run Aperture 2, then launch Aperture by double-clicking your regular Aperture 2 library; this should open Aperture on the correct library. In Aperture 3 you also simply could hold down the options-key while double-clicking the Aperture Applications icon in the Dock - probably this works in Aperture 2 as well,
But if you need to open your Aperture 3 trial library with Aperture 2, because you converted your Aperture 2 library to Aperture 3 format; there is no easy way to do it. The best would be to find a backup of your library from the time before you converted it. If you do not have such a backup, then the easiest way would be to upgrade to Aperture 3 at this point.
I do not know enough about the Aperture 2 library format to be able to tell you how to manually downgrade an Aperture 3 library to Aperture 2 format.
Regards
Léonie

How do I get Mozilla Firefox to download for GB version because all I keep getting is the US version, which is conflicting with AYI on Facebook.

How do I get Mozilla Firefox GB version to download? because all I keep getting is the US version, which is conflicting with AYI (Are You Interested) on Facebook. Which won't allow me to access my messages, browse and see who's viewed me on this site. But I have had Mozilla Firefox before (English version) and it as allowed me acces to AYI on Facebook. so I cannot understand why the US version won't allow the same access to AYI on Facebook?

You can download Firefox in many different languages.<br>
You can view the available languages [http://www.mozilla.org/en-US/firefox/all/ here].

Smartview with Hyperion Enterprise

Hi,
I have installed Smartview 11.1.1.1 and Hyperion Enterprise 6.5.0 on my machine.
Now I want to retrieve data from Hyperion Enterprise 6.5 in the excel sheet using Smartview 11.1.1.1.
So how can i do connection of Smartview with Hyperion Enterprise 6.5
Thanks in advance.

Does SmartView 11.whatever works with Enterprise?
If so, it's sort of amazing -- 11x is really enterprise level software and Enterprise is...not. Melding the two together, if it works, it's sort of amazing, especially considering how non-web services Enterprise architecture is.
Okay, I did a search and there it is: http://download.oracle.com/docs/cd/E12825_01/epm.111/sv_user_help/conn_add.htm
Who'd a thunk it.
Enterprise is like the monster in a horror film -- every time you think he must be dead, nope he keeps on coming back. Has it significantly changed since HFM was introduced?
Regards,
Cameron Lackpour

Quicktime 7.1.6 conflict with Microsoft Office

I installed QT 7.1.6 on both my laptop and desktop. It caused Outlook, Word, and QT to hang on both machines. I completely uninstalled QT and Itunes from both machines, no problem since the uninstall. I may go back to an earlier version later.
Anyone else have this problem?
Optiplex 745 Windows XP Pro

Don't think that's it since it worked with 7.1.3, but with 7.1.6 it not only fails to beep but occasionally *crashes the browser*.
Downgrading to 7.1.3 makes it work again.
The about:plugins page shows the same thing with both quicktime versions as far as which file is registered to play MIDI. (Well, the version number on the quicktime plugin changes from 7.1.3 to 7.1.6, but other than that the about:plugins page stays the same)
No, I really do mean that QT 7.1.6 on Windows is broken with regard to being controlled with Javascript. That the Mac version works is nice for Mac users, but irrelevant to my situation. I have yet to test stuff with both QuickTime versions in Internet Explorer.
Windows XP

Language Setting for - Hyperion Smart View for Office

Hi,
Here's a scenario I need to find an answer to.
1. We have Essbase system 9 installed on a machine named: USESSSRVR and here the ESSLANG environment variable is set to "English_UnitedStates.US-ASCII@Binary".
2. We build two Unicode cubes, one for Korea Sales called APPKR.SALESCUB & other for Turkey Sales called APPTR.SALESCUB
3. Korean users are sitting in Korea & Turkey users are in Turkey & both these users need to see data in their local languages.
4. Since Essbase Excel Add-In is not compatible with Unicode cubes, we have asked them to use "Hyperion Smart View for Office".
Now question is,
-> Where in this entire system do I need to do Language Settings so that they see their characters correctly?
-> Is there a place in Smart View where you can set languages?
-> Also we have a limitation that we need to have both the applications APPKR & APPTR on the same Essbase server which is in US.
PLEASE HELP.
Thanks.
~Jaymin Darbari.

It's actually because you are installing over an old version. Uninstall SV, review the registry entries and directories and then reinstall with admin priv.
Of course when I looked it up on support the Oracle ID 1466433.1 suggests that the .net install is corrupt so was i going mad? Not beyond reasonable doubt since I put in an SR a while back about it so I have proof that it is listed as an " "internal bug #14149839 : "SMART VIEW EXTENSION ACTIVATOR OBJECT (-2147467262) This is reported for excel 2010" has been raised with development team. As per the update from the bug this issue has been addressed in patch 11.1.2.2.310 which is yet to be released."
So if you are on an earlier version of Office possibly is because of the .net install (which I think needs v3.5, at least for Office2003), but I would try do a clean install first.
Steve

Conflict with Hyperion Smartview vs. Microstrategy Office, Version 8.1.1 HF

Similar Messages

Maybe you are looking for