Conflicting application and link not available
anytime i want to download,my phone always shows link not available.and also downloaded applications did not open by showing conflicting applications.and i came here and saw nokia browser but did not download.have tried the solution.please help me oooooo
Hi Badex82,
Welcome to Nokia Support Discussions!
Try following the instruction on this thread: http://discussions.nokia.com/t5/Phone-Applications/Error-To-Run-Nokia-Xpress-Aftet-Update/m-p/236409...
Similar Messages
-
Hi i cant download files through my mobile nokia C2 01 it if i click on any files it shows a msg as link not available help.
Hi Vasantha,
Welcome to Nokia Support Discussions!
For us to better address your concern, can you provide us the following info:
1. Where are you downloading the applications? You can try to download apps and games from the Nokia Store: www.store.nokia.com
2. Are you using PC browser or mobile phone?
3. Which app/s are you trying to download? -
Hi
I have a Macbook air & iPhone 4.
what do I need to do if I want to buy a book (ebook) or an application that is not available in the iTunes store in my area i.e. Africa (Egypt)?
Do I need to open a different account in the iTunes store in the other area i.e. USA ?
Please advice
Thank youYou can only buy content from your own country's store i.e. the Egyptian store if you are in Egypt - you need to be in a country to use its store, so to use the US store you will need to be in the US and have a US billing address on your account. If there is an app or any other item that you would like to be buy that isn't currently available in the Egyptian store then you can try requesting that it be added, but unless the app's developer or rights-holder agrees to it then Apple won't be able to sell it there : http://www.apple.com/feedback/itunes.html
-
How can I log onto iCloud from my iPad when the option is in grey and therefore not available
How can I log onto iCloud from my iPad when the option is in grey and therefore not available. I deleted my account as it was showing up with an old Id ( I'd changed my email) but now I've done that it won't give me the option of logging back on. Do I have to do this on another device Or computer linked to iTunes first?
THanksHi Kate, have you perchance enabled restrictions on your device. (Settings > General > Restrictions)
-
The BPM application server is not available
Hello there
I have installed and configured Aqualogic Enterprise for
Weblogic from scratch following the manual http://edocs.bea.com/albsi/docs57/adminguide/index.html.
I have my weblogic server started and have started servicing all requests for wlj2eedeployer.
But when i click on the leaf button for my engine ear or any ear in Engines/EditEngine/J2EE Application server files,the install icon is not coming.The BPM application server is not available is the message displayed.Please help.yup.I can see the hiperspace with my processes in it.
As you said i installed and configured from scratch.
But when i click on the process application
"Component execution error.
Note: In order to send the administrator the information he needs to solve this problem, complete the following steps:
With the error message still displayed in your browser, go to the File menu of the browser and select the option 'save as'.
A dialog to choose the directory where to save the file will be displayed. Browse until you get to the directory which you would like to save the page with error.
Give the file a name and click 'save'. By doing this, you are saving the error message to a file from which the administrator can identify the problem by looking at its code" is getting displayed.I tried the sample hello world process also.I got the same error.But am very happy that i can view my processes.thanks for all the help. -
Set Application Parameters link not activate under Web Admin Tasks of Admin
In the " How to do currency translation..." paper, there is a statement as following:
"The currency conversion business rules tables can also be activated by going through the web
admin parameters where the following parameter is set to u201C1u201D.
FXTRANS 1
However after I login to BPC Admin consol, I notice that Set Application Parameters link not activate under Web Admin Tasks of Admin Consol.
Where should do this? Should I do it under Set AppSet Parameters?DFW,
In the non-web Admin Console, you should also be able to accomplish the same thing by going to the application, clicking "Modify application", then "Change application type", then "Modify Application", then choosing the "Currency Conversion" application option.
In general, this is how business rules can be turned on without messing around in the application parameters, and should really be the preferred method unless you have done some kind of customization that an application modification will interfere with.
Ethan -
Timemachine and link not work property...
At home I have 10.4.2 and no digidesign hardware.
Timemachine and link not work property...
I send them: when I use ol algorythm- they caclulating 1 mono file (3 min lengh) about 15 min at dual G5. It is normal? And when I use new algorytm- nothign happen whith file. No result. (1 week it work fine).
Link in matrix not work
And what system I shood to use at studio whith PT?CRash when change lengh of region whith new algoruthm
Date/Time: 2005-08-24 12:11:29.752 +0400
OS Version: 10.4.2 (Build 8C46)
Report Version: 3
Command: Logic Pro
Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Parent: WindowServer [91]
Version: 7.1.0 (7.1.0(877))
Build Version: 1A73
Project Name: LogicPro710_ApplicationData
Source Version: 900001
PID: 288
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x0000007e
Thread 0 Crashed:
0 com.apple.logic.pro 0x0059a8c8 0x1000 + 5871816
1 com.apple.logic.pro 0x0037183c 0x1000 + 3606588
2 com.apple.logic.pro 0x00370000 0x1000 + 3600384
3 com.apple.logic.pro 0x002983b4 0x1000 + 2716596
4 com.apple.logic.pro 0x00298a84 0x1000 + 2718340
5 com.apple.logic.pro 0x00298c28 0x1000 + 2718760
6 com.apple.logic.pro 0x0005e264 0x1000 + 381540
7 com.apple.logic.pro 0x0005c6e0 0x1000 + 374496
8 com.apple.logic.pro 0x002aa538 0x1000 + 2790712
9 com.apple.logic.pro 0x00571e10 0x1000 + 5705232
10 com.apple.logic.pro 0x0016c090 0x1000 + 1486992
11 com.apple.logic.pro 0x0017864c 0x1000 + 1537612
12 com.apple.logic.pro 0x00178ad8 0x1000 + 1538776
13 com.apple.logic.pro 0x0016c150 0x1000 + 1487184
14 com.apple.logic.pro 0x0018e388 0x1000 + 1627016
15 com.apple.logic.pro 0x0018e588 0x1000 + 1627528
16 com.apple.logic.pro 0x0017d0cc 0x1000 + 1556684
17 com.apple.logic.pro 0x00124170 0x1000 + 1192304
18 com.apple.logic.pro 0x002fed40 0x1000 + 3136832
19 com.apple.logic.pro 0x003026a8 0x1000 + 3151528
20 com.apple.logic.pro 0x00300a94 0x1000 + 3144340
21 com.apple.HIToolbox 0x931229f4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
22 com.apple.HIToolbox 0x9312214c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
23 com.apple.HIToolbox 0x93128ed0 SendEventToEventTarget + 40
24 com.apple.HIToolbox 0x93229ffc SendEventFromMouseDown + 156
25 com.apple.HIToolbox 0x93205998 HandleClickInContent + 368
26 com.apple.HIToolbox 0x93155d6c HandleWindowEvent + 1584
27 com.apple.HIToolbox 0x931655c8 StandardWindowEventHandler + 160
28 com.apple.HIToolbox 0x931229f4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
29 com.apple.HIToolbox 0x9312214c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
30 com.apple.HIToolbox 0x93128ed0 SendEventToEventTarget + 40
31 com.apple.HIToolbox 0x93229ffc SendEventFromMouseDown + 156
32 com.apple.HIToolbox 0x931b6b08 HandleWindowClick + 572
33 com.apple.HIToolbox 0x931b6560 HandleMouseEvent + 456
34 com.apple.HIToolbox 0x931655bc StandardWindowEventHandler + 148
35 com.apple.HIToolbox 0x931229f4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
36 com.apple.HIToolbox 0x9312214c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
37 com.apple.HIToolbox 0x93128ed0 SendEventToEventTarget + 40
38 com.apple.HIToolbox 0x931b5530 HandleMouseEventForWindow(OpaqueWindowPtr*, OpaqueEventRef*, unsigned short) + 236
39 com.apple.HIToolbox 0x931b4aa8 HandleMouseEvent(OpaqueEventRef*) + 368
40 com.apple.HIToolbox 0x9312923c ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 496
41 com.apple.HIToolbox 0x93122c44 DispatchEventToHandlers(EventTargetR -
On i-pad, when I try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no to my request and, "item not available in the U.S. store." My Mac will not use update iTunes to any later version than the one I have because my os is also out of date, but when I try to update that i cant, so what do I have to do? Please don't tell me I have to buy a new Mac to be up to date.
On the iOS device you must be logged into the store with the exact same Apple ID you used to originally purchase the service. Go to Setting > iTunes & App Stores and if necessary sign out/in and then enable iTM.
-
When my Nano is connected to my computer, it shows that I have music downloaded to it, but when i touch the screen to play the music, it is not showing up and is not available to play. I've tried reloading it with no success
iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?
-
Just erased my disk, whent to install Maverick and get : "Not available now" message since yesterday. Can someone help me revive my dead IMac!!
If you are selling or giving away the computer then follow these instructions:
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must
be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be sure
to opt for that.
Destination means a freshly erased external backup drive. Source means the internal startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See What to do with iCloud before selling your computer.
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list.
Click on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
I was editing my photos and adding them to a album and suddenly the app is closed marking a erros. I go back and open the application and are not photos. How can I recover them? Are not in the image folder.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
I had Iphoto 08 and now is gone, I have looked under applications and is not there. Also most of the pictures are gone. Can you easily delete the application?
Obviously you can.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
Upload Local Application option is not available under Tools menu: SAP design studio
Hi All,
I have created dashboards in design studio 1.3 in local mode. Now I want to upload my application to the Business Intelligence platform. So I referred the below thread.
Design Studio 1.0: Upload a Local Application to the Business Intelligence Platform
But for me under tools, Upload local application option is not available. Do I have to add some connections in preferences option to make it visible. Please reply ASAP I have to upload immediately
Thanks in advance.
Regards,
Saranya SSelect Tools, Preferences, under Preferred Startup Mode, select BI Platform
Please be sure in the future you search before you post, per SCN rules, as this has been answered before. -
I have updated to Final Cut 10.1.1 but existing projects from previous version will not update and are not available. Have tried to re-install Final Cut as well as bring the projects to another computer which has the update, but they still will not update. Has anyone else encountered this problem and is there anyone who can assist?
In the Finder take a look at the path where your old projects and events are stored. They should be in Final Cut Projects and Final Cut Events folders respectively. Those folders need to be in Users/user/Movies on the boot drive and/or at the root level of other drives for FCPX to see them.
If that's indeed the case, then you should be able to get them updated ny using the Update Projects and Events command form the File menu and then clicking on Locate.
Russ -
My iphone 4 is locked on one application and will not close or turn off my phone please help!
my iphone 4 is locked on one application and will not close or turn off my phone please help!
If you mean that the iphone froze in some random app you have ....the solution is easy .
Press and hold both Home Button and On/OFF button for about 15 seconds . The device should turn off and on again .
If not than please wait until the battery goes out and try the above step again whilst device is off .
Hope it helps
Maybe you are looking for
-
Call failed constantly after upgrade to OS 4.2
Has anyone else suffering the same problem? My iPhone 4 just keeps failing to make a call after upgrading to OS 4.2. The strange thing is that it seems this just happens within vodafone's 2G network. If I turn 3G on, there is no problem with call fai
-
Cannot use Keyboard and touchpad at the same time? Twist
Hi, I have the lenovo twist with the i7 processor and a 500GB hard drive (8GB ram). I have noticed that when using the keyboard, you cannot use the touchpad. Although you can use the trackpoint? I know this is a minor issue but can it be updated to f
-
Problems with Microsoft Office 2008 and 2011
Hiya, I am running Mountain Lion on my Macbook Pro and I'm having ongoing problems with the Office system. I'm doing a PhD so I use footnotes all the time and in Word 2011, the autosave function makes the footnotes disappear from the bottom of the pa
-
Why ist the printed font size smaller then the choosen font size in pages
Hi, sorry about my english it´s a lot of years agoo i used it. since a cuple of months i choosed a mac mini to be used as my favorit pc-system. Now i am using pages to create letters and stuff like greeting cards, posters, flyers and so on. In this i
-
I can't UNINSTALL Lenovo Veriface 4
I don't want this software on my computer. When I tried to uninstall it, it says it was never installed so cannot be uninstalled! It is in my Start>Programs List, so it is installed. I went into msconfig and unchecked it from startup. I attempted