Conflicting Receive Issue

Hi ;
I have to process. Ans that's use send and receive activity for their communication. I've call 2 sub-process from main process. But i have receive this error:
ORABPEL-03810 Conflicting receive. A similar receive activity is being declared in the same process. Another receive activity or equivalent (currently, onMessage branch in a pick activity) has already been enabled with the partnerLink "CallSubProcess.reference", operation name "sendInfoToCallerProcess" and correlation set "" (or conversation ID). Appendix A - Standard Faults in the BPEL 1.1 specification specifies a fault should be thrown under these conditions. Redeploy the process after removing the conflicting receive activities.
I haven't overcome that this issue yet. Are there anyone that facing this problem before? And, what's the solution way?
Regards..

Hi,
What product/version are you running when encountering this issue ?
As you can see from the error message you "correlation set" is empty. Normally BPEL should be able to handle correlation by itself but when this goes wrong you can force it by setting up custom correlations.
You can find more info on Antony's blog https://blogs.oracle.com/reynolds/entry/bpel_correlation
I've encountered this problem many times before on 10g. Just forcing correlation solved this.
Good luck,
Kind Regards,
Nils

Similar Messages

Conflict checking issues for package XYZ on zones a, b, c

Hello.
I'm trying to install postfix from Blastwave on a Solaris 10 U4 Sparc system with two non-global zones installed. To do that, I do:
adm@winds02 ~ $ sudo pkg-get -i postfix
No existing install of CSWpostfix found. Installing...
Pre-existing local file postfix-2.2.8,REV=2006.03.13-SunOS5.8-sparc-CSW.pkg.gz matches checksum
Keeping existing file
Analysing special files...
## Verifying package <CSWpostfix> dependencies in zone <ldap-client>
## Verifying package <CSWpostfix> dependencies in zone <ldap-server>
Conflict checking issues for package <CSWpostfix> on zones
<ldap-client, ldap-server>.
Do you want to continue with the installation of <CSWpostfix> [y,n,?] How do I find out, which issues there are supposed to be?
Thanks,
Alexander

You could also try using an admin file that should answer those questions for you
I usually use something like:
mail=
instance=unique
partial=ask
runlevel=ask
idepend=nocheck
rdepend=ask
space=ask
setuid=nocheck
conflict=nocheck
action=nocheck
basedir=default

Conflict checking issues for package

Trying to install SMCsubv144 on a server in the global zone. I get the following:
root@xxxxxxx(pts/3):/tmp# pkgadd -d ./subversion-1.4.4-sol10-sparc-local
The following packages are available:
1 SMCsubv144 subversion
(sparc) 1.4.4
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]:
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx1>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx2>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx3>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx4>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx5>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx6>
Conflict checking issues for package <SMCsubv144> on zones <xxxxxx1, xxxxxx2, xxxxxx3, xxxxxx4, xxxxxx5, xxxxxx6>.
Do you want to continue with the installation of <SMCsubv144> [y,n,?] n
Installation of <SMCsubv144> was terminated due to user request.
When I choose y to continue, I get into a loop of the following questions:
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/bin <package> on SMCsubv144 <zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/doc <package> on SMCsubv144 <zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/include <package> on SMCsubv144
<zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/lib <package> on SMCsubv144 <zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/man <package> on SMCsubv144 <zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/man/man1 <package> on SMCsubv144
<zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/man/man5 <package> on SMCsubv144
<zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/man/man8 <package> on SMCsubv144
<zone>
and that goes on and on until I answer n. And never specifies which zone it's talking about...just <zone>.
I've successfully installed the same pkg on a non-zoned server. Also tried SMCsubv143 and got the same error. So the pkg is ok, it appears a problem with the zones and/or /usr/local.
Thanks for any info.
mk

You could also try using an admin file that should answer those questions for you
I usually use something like:
mail=
instance=unique
partial=ask
runlevel=ask
idepend=nocheck
rdepend=ask
space=ask
setuid=nocheck
conflict=nocheck
action=nocheck
basedir=default

Conflicting receive. Another receive...

Hi,
I am Samir.
I have a business process with three parallel flows (used flow activity). Each flow has one invoke and one receive activity. There are three different partnerlinks with Invokes and all three receive activities use the same partnerlink, "client".
There are saperate correlation Ids set with the invokes. The same correlation Ids are used in respective receive activities as well.
I am getting the error +"*Conflicting receive. Another receive activity or equivalent (currently, onMessage branch in a pick activity) has already been enabled with the partnerLink...*"+ at the receive activity.
Can anyone advise the possible resolution?
Thanks in advance.

Hi Sam,
when you have pick Activity ( with multiple OnMessage brances with diff. operations having correlationSets) and not using the unique CorrelationID, you will be getting this error .
Hope this holds true for you.
Thanks & Regards,
anvv sharma

Conflicting receive in BPEL

Im having two BPEL process.The first BPEL process will check the dehydration store for the second BPEL process intstance.If the second BPEL process instance is already available then the first BPEL process will call the initiate operation of the second BPEL process(for initiating the second instance) else it will call the update of the second BPEL process(Correlated using correlation ID). The correlation pattern used is OUT.
This is working fine if i post one or two messages but if i post 100 or 500 messages, Im getting "Conflicting receive" exception and my first BPEL process is invoking initiate process instead of update process. Im not sure of whether this is due to time lag happening in the dehydaration store or any other stuff.

Hi Venkat,
Just a thought....When you initiate process 1 twice, depending on the adapter polling frequency instances are created. Considering there are only 2 instances created, the process 2 should ideally call the initate operation and complete successfully. But, when you have 100 to 500 instances created for the same process with different instance ids, since the message is the same..its getting confused as to on whom to perform the initiate operation. So, what I feel is to check the dehydration store for the process name (instead of the number of instances or its instance id/name). In this way, once the process is deployed on the BPEL Server, its suitcase gets created and then you can fetch its metadata only once irrespective of its number of instances.
Hope that helps!
Cheers
A

Microsoft Exchange is not updating local Outlook - Send and Receive issues.

Hi everyone,
Our office has just moved to using Office 365 business edition where we are sending and receiving emails via Microsoft Online Exchange.
It has been running for 3 days so far and we do love the product however we are having a major issue at the moment and that is our local outlook 2010 and 2013 folders are not constantly synching with the exchange. We are finding that it can be hours
before emails push through to our inbox and we will receive 20 emails all at once. It is also occuring when we send emails, they will sit in the Outbox and the only way it seems to get them to send or receive is to close Outlook and re-open the program.
We also find that sometimes when we are out of the office and using the 'Outlook Web App' that emails we send to clients via here and not always synching with the local Outlook its a bit of a mess really. This is not great as we are a legal office
and need to attend to emails urgently at times and must have all emails arrive locally.
Can anyone shed some light on how this matter can be fixed urgently?
Thanks
Lisa

Hi,
As far as I know, for the sync issue in the on-premise Exchange server environment, we can check if we have selected the option ”send immediately when connected”:
Outlook 2013: file>options>advanced> send and receive> send immediately when connected
However, since your server is Exchange online, I recommend you ask for more professional help on our Exchange online forum:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thanks,
Angela Shi
TechNet Community Support

Exchange 2013 Mail Receiving Issues

Hi everybody,
Yesterday I configured a new DC and Exchange on Hyper-V (Server 2012 and Exchange 2013)
All functions and rolls are configured and installed but i am having issues receiving external e-mails.
Almost all of the external mails are being deliverd a half hour to a hour after being sent.
To start of on the first level.
I got a Siemens Fiber modem with an external address connected to the WAN of my Draytek 2995 router.
Alle the needed ports are forwarded to the Draytek (80,443,25,1723).
The Draytek DHCP function is set to off.
192.168.168.2 (DC) -> 80 (HTTP IIS)
192.168.168.2 (DC) -> 1723 (RRAS)
192.168.168.3 (Exchange) -> 25 (SMTP)
192.168.168.3 (Exchange) -> 443 (SSL)
My Draytek router is connected through LAN1 to a HP switch (unmanaged).
The physical server has 3 NIC's, all of these are connected to the HP Switch
I Disabled Hyper-V Queuing on the NIC's because this causes an issue with slow network connections.
The network has been configured as following.
I configured the Server 2012 R2 on the hardware(physical server) with only the Hyper-V roll.
NIC1is setup for the physical server,
IP Address: 192.168.168.1
Subnet: 255.255.255.0
Gateway: 192.168.168.254 (Draytek address)
DNS: 192.168.168.254 (Draytek address)
The Server software firewall has been set to a private network through the local security policy.
I have setup 2 VM's through the Hyper-V roll.
The first VM is the Server 2012 R2 Domain controller.
For this VM I created a virtual switch connected to my second NIC(2).
I unchecked the box where my host can communicate with the NIC(2).
The DC has been configured as following:
Hostname: SERVER
IP Address: 192.168.168.2
Subnet: 255.255.255.0
Gateway: 192.168.168.254
DNS: 127.0.0.1
I can ping to all the adresses from this server (internal and external).
The server has been promoted to domain controller with the following rolls.
ActiveDirectory, Certificate Autohority, DHCP, DNS, RRAS, RDP.
Alle these rolls have been set and working. (all have been tested)
DHCP has all options configured (scope, router-192.168.168.254, dns-192.168.168.2)
A DNS simple and recursive test work fine.
I did no configuration on the DNS after the DC PROMO.
So i created users in the AD.
After that I created a second VM, this one is used for the Exchange.
I setup a second virtual switch connected to NIC3 and installed Server 2012 R2 with the following config.
Hostname: SERVER
IP Address: 192.168.168.3
Subnet: 255.255.255.0
Gateway: 192.168.168.254
DNS: 192.168.168.2 (pointing to the DC)
I joined this server to the domain, everything is working fine.
Both servers have internet and network.
Running portscans on 1723 and 80 all work like a charm.
No its time to install Exchange.
I ran all the prerequisits and PowerShell commands (IAcceptLicense. etc.)
Installed de needed API and filters.
Installed Frameworks 3.5 on both servers.
And the Exchange installation was succesfull.
CU3 is also installed.
I configured the send connector, accepted domains etc.
Created all needed certificates (self signed)
Did a portscan on 433 and 25 and they work.
All the hosting records are set mail.domain.nl etc. and MX records.
I created inboxes for the users and was able to connect them to the users in the Active Directory on the DC without any problems.
Connecting through the internet to OWA works perfect and i can login with users.
Sending e-mail internally works perfect, the messages are being deliverd in an instant.
Sending e-mail externally also works perfect, i receive mails in a few seconds on a person email address.
But when i reply or send e-mail to my new Exchange it can take up to hours to receive the mails!
I did online SMTP checks and e-mail checks, the all come out like it should.
One message from MX TOOLBOX on the SMTP:
SMTP Transaction Time
8.408 seconds - Not good! on Transaction Time
I have nog other receive connectors setup, just the standard connectors.
So i got into the Exchange ECP and under "server" i setup the DNS to listen to 192.168.168.2 (DC).
I've read that when this is set to all ip addresses it can cause mail delay, but no luck.
I ran the best practices analyzer and get about 23 errors and 20 warnings.
A lot of services are unhealt like the "ExchangeTransport).
I have no idea what is causing the issues and read almost every forum.
Does anyone have a clue what is going on?
Did i miss something, is there a misconfiguration?
Best regards,
Tim

The mailserver did not receive any e-mails in this timespan, it was not an issue with the connector to the user mailboxes.
The internal e-mail also works flawless.
The entire Exchange server just not received this mail in time.
I sent an e-mail from my personal accout with the option in my outlook to receive a delivery-reply.
I got the reply as soon as the mail was deliverd, this took about a half hour to a hour.
After you asked me about the firewall, i got a hunch..
It had to be on the incomming connection, so i checked every single firewall on the network and disabled them.
Still the same problem...
But there was still one ethernet device that could have a firewall, the internet modem!
This ATM modem receives multiple external IP's from the ISP, so I figured there was no firewall on this device. (Just like all the cable modems that are deliverd in our area by Ziggo(ISP).
But I was wrong, there was a firewall enabled on the modem!
All the ports in the modem had been forwarded but somehow the modem-firewall filtered the traffic,
creating the issue on the incomming e-mail.
I disabled the firewall and all the external e-mails are being received in an instant!
Re-enabled all the software firewalls on the servers and re-enabled the malware filter through powershell, after these steps I did another test, and everything still works like a charm!
Many thanks for your help Kjartan!

Conflict Resolver issues need solution

I use Entourage 2008 (BOO!) as my main calendar/AB/notes/task manager and I used to sync it with iCal to always have a current calendar just in case I encountered one of those microshaft problems.
Occasionally the Conflict Resolver pops up with numerous conflicts and I always choose "use Entourage to resolve" -- which would always end up creating duplicate events in the calendar which I had to go in and manually delete. I got tired of this so I turned off syncing in iCal.
Today, I opened iCal after a few weeks (as I don't manually enter info into it) and I got conflicts. I wound up with who knows how many dupes, so I just restored up to the last file I backed up using iCal and then manually deleted the dupes it created for this month.
I prefer to be able to sync between iCal and Entourage since it is easier for me to print out events using iCal in Daily or List views -- which I do frequently because I need any notes to print out and Entourage appears not to have this ability, like Outlook did -- or maybe it's hidden and I got tired of looking for the thing I need to tick in order for the notes to print.
So getting back on track here --- is there any way to turn off this conflict resolution so that I can change the iCal prefs back to syncing between both calendars because it would be a real pain to enter info into two calendars when Entourage can automatically place it into iCal.
I'd been using this function since Office 2004 and I think I only had the conflict resolver come up once, so who knows --- it might be a 2008 issue??? Leave it to microshaft to cause problems.

I just turned the function back on, and since getting the iPhone 3G a few months back, haven't really had to deal with problems as before. I basically just modified Entourage the last time the CR popped up, d/l something called iCal Dupe Deleter, so that way I don't have to scan iCal -- and it's all good, for now ;-]

PI 7.0 - jdbc receiver issue with MS SQL Server

Hello Experts,
I have a jdbc receiver scenario on PI 7.0 for just one table on MS SQL Server and I'm using the update_insert action.
When the entry does not exist it is created normally and returns insert_count=1 and update_count=0.
When the entry already exists, it's generated the statements for insert and for update (the 2 statements are visible on RWB) and returns insert_count=0 and update_count=0.
Any error occurs and in the RWB the log shows the request was processed with success.
I've already enabled the log for sql statements on the channel, but the statements are correct.
I've reviewed also the <key> tag on the mapping and it's ok.
Any suggestion to try fix this issue?
Thank you very much.

Can you please check in the database the format of the specified fields in the update statement. Sometime we can have situations that the insert works but the subsequent update fails. An example:
Suppose key field1 value being passed from XI is '1234' in characters but in db it is stored as '00001234'.
Regards,
Indranil

Outlook 2010 Send/Receive Issue

I have Windows. Office 2010. Norton Internet Security.
Microsoft Windows 8 x64 Business Edition (Build 9200)
Dell Inc. Inspiron 7720
iTunes 11.0.4.4
QuickTime 7.7.4
FairPlay 2.4.14
Apple Application Support 2.3.4
Using Outlook 2010, pop email addresses, if I edit a email in the outbox, it will get stuck there and not send. No errors. However, when i disable the iTunes outlook com add-in, it works as it should.
There is a bug in iTunes & Outlook 2010.

Hi,
The user can’t send/receive any emails, not just can’t forward emails to his phone, right? If I’ve misunderstood something, please feel free to let me know.
Did he forward emails to his phone with Outlook rules?
Did he get any error message or the outgoing emails just stuck in Outbox?
Can he send/receive emails from web access? If not, please contact the user’s ISP to help resolve the problem.
If web mail works fine, we can follow the steps below to troubleshoot the issue on Outlook side:
1. Please check if Outlook shows Disconnect on the bottom of the Window. Hold Ctrl key and right click on the Outlook icon on the tray, click Connection Status to check if your email account is disconnected.
2. If the user installed any security programs, please temporarily turn off them to check the result.
3. Try to reset Send/Receive settings to check the result. To do this, go to
C:\Users\%username%\AppData\Roaming\Microsoft\Outlook\
Locate the <profilename>.srs file and rename it to
<profilename>.old and restart Outlook to check the result.
4. If above not working, please try to create a new mail profile and setup the email account in the new profile to check the result.
http://support.microsoft.com/kb/829918
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Send/receive issue after adding too many additional mailboxes

Hello Everyone,
I am trying to solve a problem with Outlook 2010, together with Exchange 2007 (SBS 2008 server). I am not sure if I should post this in the Exchange forum, or the Outlook 2010 section.
The inbox (or actually all folders) are not updating when I add too many additional mailboxes via Account Settings>More Settings>Advanced Tab.
When i keep it down at 4 mailboxes, all seems fine. When I add a fifth mailbox, it no longer syncs automaticly. The user has to manually select send/receive in order to receive mail.
What i tried:
1) Fixing OST
2) Removing OST, create a new one.
3) Create a new outlook profile
4) Tried /cleanviews and /safe switches
5) Checked all Office updates
6) Tried different Send/receive group configurations (altough it is to my understanding this should not apply for Exchange)
7) Disabling cache (not an option, outlook crashes a couple of minutes because of the large size of the additional mailboxes)
8) Disabling "Download Shared Folders" in Account Settings>More Settings>Advanced Tab
Could anyone assist with this problem? Thanks in advance!
Regards, Anton

Hi Anton,
As far as I know, Outlook 2010 allow up to 5 Exchange accounts to be configured in a single mail profile by default. But the limit can be changed up to 15 accounts by adding a registry key:
HKEY_CURRENT_USER\Software\Policies\Microsoft\Exchange
DWORD: MaxNumExchange
Value: a number between 1 and 15
Please try adding this key and let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

WAIT(RECEIVE) issue in shared server

I am reading cursor in a thread in C# side. When I stop the thread before fully reading the cursor, then the STATUS in v$shared_server shows WAIT(RECEIVE). If the cursor is fully read then v$shared_server does not contain WAIT(RECEIVE) status. So to avoid this issue one possible solution is to read the cursor fully in background. I am using Oracle 10.2.0.1 and my server is Shared Server.
Please suggest any other solution for this issue.
Thanks in Advance.
Regards
Neena

Hi,
Could you try the following to migrate the logins and check the result?
1. You may drop all the windows login. Modify the script generated by sp_help_revlogin step and replace create login
to drop login.
2. Use the script generated by sp_help_revlogin step to create
Logins. Modify login name to accommodate new domain name.
3. Grant server level roles using the output from:
Generate Server level role related info :
SELECT 'EXEC sp_addsrvrolemember ''' +
p.name + ''' , ''' + r.name + ''';'
FROM
sys.server_principals r
INNER JOIN sys.server_role_members m ON r.principal_id = m.role_principal_id
INNER JOIN sys.server_principals p ON
p.principal_id = m.member_principal_id
WHERE
r.type ='R'
Sample Output :-
EXEC sp_addsrvrolemember 'sa' , 'sysadmin';
4. Map the SIDS using below command for all DB by using ALTER USER. For example:
ALTER USER [DomainA\UserA] with login = [DomainB\UserA]
See:
http://blogs.technet.com/b/mdegre/archive/2011/06/27/can-i-move-sql-server-to-another-domain.aspx
Here some useful articles:
http://www.databasejournal.com/features/mssql/article.php/3922256/Re-generating-SQL-Server-Logins.htm
http://support.microsoft.com/kb/918992/en-us
http://support.microsoft.com/kb/240872
Thanks.
Tracy Cai
TechNet Community Support

Outlook 2010 Professional Plus Send/Receive Issue

When my client leaves for the day and his computer is idle his outlook 2010 Professional Plus stops sending/receiving. Because of this NONE of his emails get forwarded to his phone when he is away from his computer. I've spent HOURS trying
to figuring this issue out, but I have not been successful. Please help me make send/receive work continuously.

Hi,
The user can’t send/receive any emails, not just can’t forward emails to his phone, right? If I’ve misunderstood something, please feel free to let me know.
Did he forward emails to his phone with Outlook rules?
Did he get any error message or the outgoing emails just stuck in Outbox?
Can he send/receive emails from web access? If not, please contact the user’s ISP to help resolve the problem.
If web mail works fine, we can follow the steps below to troubleshoot the issue on Outlook side:
1. Please check if Outlook shows Disconnect on the bottom of the Window. Hold Ctrl key and right click on the Outlook icon on the tray, click Connection Status to check if your email account is disconnected.
2. If the user installed any security programs, please temporarily turn off them to check the result.
3. Try to reset Send/Receive settings to check the result. To do this, go to
C:\Users\%username%\AppData\Roaming\Microsoft\Outlook\
Locate the <profilename>.srs file and rename it to
<profilename>.old and restart Outlook to check the result.
4. If above not working, please try to create a new mail profile and setup the email account in the new profile to check the result.
http://support.microsoft.com/kb/829918
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

AV receiver issues..No Sound?!!

Hi, i have a Onkyo TX-SR308 AV receiver which i run my Mini Mac through. The video is not an issue, as in displays it finds the AV. however when i go into Audio there is no output showing the receiver; therefore i have to play all sounds through Mini Mac.. I understand that it is because my surround sound is 5.1, and the mac is 2.1 . But i cannot for the life of me figure out how to change this..
Can someone please help??! Its annoying trying to listen to a film thats playing through my Mini Mac?!!!
thanks

I am connecting to Mac (server edition) via HDMI v1.3 .... There are no adapters either. The one way arond this looking back at it, maybe to jack in and phono out?!! Just a real shame as it doesnt want to do 5.1 ....
If you have anymore ideas, id be happy to hear?!!

Send/Receive issue- third time in one week

I've been having the same issue for the past week with my phone sending and receiving emails.
The first time, I had "No Service" for over a day and finally took the battery out and it was okay except for the receiving emails part.
The second time, I called the T-Mobile support line and they walked me through the process and everything worked smoothly.
Yesterday and this morning, same issue. I couldn't send or receive. So I took the battery out, resent service books and now everything is fine.
My concern is that this is the third time in one week that this has happened. When I spoke with the rep, he said there didn't seem to be any network issues. At first he thought there was a server issue because I'm from the west but now live in the midwest and my phone still "operates" on the west coast network (if you will) but there didn't seem to be any issues out there.
Has anyone else ever experienced this issue this often? Any recommendations on additional steps I should take opposed to always taking the battery out and resending service books, etc.?
Thanks!

Hi Anton,
As far as I know, Outlook 2010 allow up to 5 Exchange accounts to be configured in a single mail profile by default. But the limit can be changed up to 15 accounts by adding a registry key:
HKEY_CURRENT_USER\Software\Policies\Microsoft\Exchange
DWORD: MaxNumExchange
Value: a number between 1 and 15
Please try adding this key and let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Conflicting Receive Issue

Similar Messages

Maybe you are looking for