Conform from 24P back to 60P -- Please Help!
I accidentally batch captured some HD 24FPS footage from a Varicam at 60FPS over firewire via the panasonic HD1200A deck using the DVCPRO HD CODEC. Final Cut normally removes the extra frames upon capture to make it 24fps. But for troubleshooting purposes (it kept aborting capture) I ended up capturing the footage without the frame removal pulldown feature enabled.
To fix this, I mistakenly tried the Cinema Tools conform feature to "conform" the footage to 24fps. This didn't remove the pulldown, but rather just slowed everything down, esentially stretching out time, making my audio tracks unusable. Unfortunately, there seems no way to conform the footage back to 60fps because the conform window only allows 24 and 30fps conversions. I need a 60fps conform technique. Is there a way to fix the footage?
Thanks for the help!
the reason I couldn't capture reliably using the 24P settings appears to be that my Firewire bus is not functioning properly--I'll get it into service but that's another issue.
Since recapturing isn't really an option because the deck was a one-time rental, I tried a slightly lossy technique, but the results were acceptable to me. Creating an image sequence was a good idea, but I wanted to preserve my audio track simulateously.
Here's what worked for me:
I started by conforming again in cinema tools to 30 fps. This gave me a simple even denominator of 60P. I then added each of these footage files to a 60P DVCPRO HD sequence. I then adjusted the speed of the clips in the timeline 200% and turned off frame blending. I then exported (recompressed) the footage to new flattened clips. I then took the conformed, messed up files offline and reconnected to the new clips, thereby preserving my loging notes, etc.
It was time consuming but worked. The audio is 48K again and the playback is 60P.
Frankly, I made a mistake that will become more common as the HD userbase expands. Most people don't understand that the Varicam 24P is actually recorded at 60P. I hope Apple updates Cinema Tools to conform back to 60P before more people make my mistake.
Thanks!
Similar Messages
-
i'm trying to activate my gift card from last christmas but it keeps telling me to "try back later". Please help I hate to see $25.00 go down the drain.
Click here and request assistance.
(91679) -
My iPhone recently broke so I was sent a brand new iPhone to replace it, however, since receiving this phone, I cannot access anything which was previously backed up onto iCloud from my last iPhone. Please help me!
If you are trying to restore to an iCloud backup, this has to be done during the initial setup process. If your phone is already set up, you will have to go back to Settings>General>Reset and tap Erase All Content & Settings, then go back through the setup screens again and when given the option, choose Restore from iCloud Backup (see image below). Be sure your phone is connected to wifi and your charger as this will take some time to complete.
Also, your replacement phone must be running the same iOS version or higher to restore to your backup. If you are running an older version of iOS than the device that was backed up, your backup will not be visible when you choose to restore to your iCloud backup. If this is the case, you'll have to update your replacement phone first. -
As I was installing the Windows 7 on my Imacwith the bootcamp and stated how I wanted to divide the drive I put 160, but I want to add more space because of the adobe software it will not install two of them, so how can I add more on the drive space to from 160 to 250? please help thank you.
I'm not sure this is what you're looking for, but it might help:
"If you made the Windows partition too small
First, back up all the information on your Windows partition. Then run Boot Camp
Assistant to restore your disk to a single volume. Restart your computer and use Boot
Camp Assistant to partition the disk again and reinstall Windows. Don’t forget to install
the Boot Camp drivers after installing Windows."
(from Bootcamp Assistant Manual see pg 22) -
Used to have ios 7 betaon my i phone and downgraded to ios 6 so i can upgrade to the official ios 7 but i lost my pc back ups. Please help me
First off, Apple doesn't support downgrading and it can potentially brick your phone. With that being said, if you created a back up in iOS 7 Beta and are trying to restore it to iOS6, you wont be able to. You need to upgrade first then restore from your backup. Don't be suprised if it doesn't work. There is a very real possibilty you may have to start from scratch.
-
When I try to create pdf from scanner, Acrobat shuts down, please help!!
When I try to create pdf from scanner, Acrobat shuts down, please help!!
Hi miketayber,
We would love to help, but need to know a bit more to get to the root of the problem. Please tell us:
What version of Acrobat are you using
What operating system you're on
Whether you've been able to scan previously
What you're scanning to (do you have the latest drivers?)
Is there an error message or number associated with the crash?
We look forward to hearing back from you.
Best,
Sara -
My safari app has disappeared from my ipad...please help me getr
my safari app has disappeared from my ipad...please help me get it back on my screen.
Check under Settings -> General -> Restrictions if you've restricted Safari
-
Can not select from my own MV. Please help.
Hello Gurus,
I have created a MV with following clauses
CREATE or REPLACE MATERIALIZED VIEW "OWNER_NAME1"."MV_Name1"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE
AS
SELECT column1, column2 .... from table1,table2
where .....
I have logged in to DB with the 'owner_name1' schema itself which is the owner of the MV.
But, when I try to select from the above MV. It gives error "Ora-00942 table or view does not exist"
I can see the same under 'user_objects' view as an object of owner_name1 schema.
Could you please help me in understanding where I have gone wrong?
DB - Oracle 9i on unix platform.
Thanks in advance!
Abhijit.Oh! I missed to mention the exact steps followed by me which created error for me,
viz.
1) I have 2 Database and their users as follows
bq. i) DB1 in local server - 'localUser'
bq. ii) DB2 in remote server - 'RemoteUser1' and 'RemoteUser2'
2) 'RemoteUser2' user in DB2 has 'select' privilage on table 'RemoteTable1' of 'RemoteUser1' ( both are remote DB's users ! )
i.e. select * from RemoteUser1.RemoteTable1; --works okay when logged into RemoteUser2. no synonyms are created hence using schema_name.table_name convention.
3) Logged in to 'localUser' in DB1.
4) Created a DB link 'local_to_remote2' in 'localUser' schema ( in DB1) to 'RemoteUser2' schema (in DB2)
i.e.
create database link local_to_remote2 connect to RemoteUser2 identified by password using 'connection_string';
DBLink was created successfully.
5) I could select from the tables of 'RemoteUser2' using DB Link. (by logging in to 'localUser')
i.e. select * from RemoteUser1.RemoteTable1@local_to_remote2 ; --- gives me expected output. no issues!
6) Now, I created below MV in 'localUser' ( no need to tell in 'DB1' )
the exact syntax I used is as follows,
CREATE or REPLACE MATERIALIZED VIEW "localUser"."MV_Name1"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE
AS
SELECT column1, column2
From RemoteUser1.RemoteTable1@local_to_remote2
where condition1
and condition2;
The MV was created successfully, and I could see it as an 'Valid' object of 'localUser' schema.
i.e. select * from user_objects where object_name ='MV_NAME1' and status ='VALID' --- tells that above create MV is an object of owner 'localUser'
But, when I try to select from the said MV. it gives me error "Ora-00942 table or view does not exist"
i.e. select * from MV_Name1; ---- neither this
select * from localUser.MV_Name1; ---- nor this works :(
Even when I try to drop the same MV it gives me same error. :(
Could you please suggest me anything so that I will be able to select from MY OWN MV ?
Please help Gurus. -
In my icloud account on my iphone I have three ios devices. How do I manage the backup of my old phone ? I dont want to detete that backup completetly, just manage that phone back up ? Please help!
It will be backed up on your computer and can later be restored to an iOS device using iTunes, if desired. Of course, if your hard drive crashes you'll lose it if it isn't backed up somewhere else. If you want to included it in your computer backup, it will be located at one of the following locations:
Mac OS X: ~/Library/Application Support/MobileSync/Backup
Windows XP: %AppData%\Apple Computer\MobileSync\Backup
Windows Vista: %AppData%\Roaming\Apple Computer\MobileSync\Backup
Windows 7: %AppData%\Roaming\Apple Computer\MobileSync\Backup -
Since uninstalling / reinstalling iTunes I am not able to sync iPhotos with my Apple TV with the following warning message stating that this is due to a 'problem on your computer. The disk could not be read from or written to'. Please help!
Welcome to Apple Discussions!
Is all the software on your computer up to date?
iTunes
iPod Updater
Also, try The Five R's
btabz -
I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD
To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
Ciao. -
Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.
Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please. -
HT2604 I can't instal software from applications instal DVD! please help me!
I can't instal software from applications instal DVD! please help me!
hi, i face the same problem and appreciate your help. I delted iphone and the library. I reinstalled iphoto from the original application install DVD and when trying to open it I get a failure message. My mac version is 10.8.5 and the install disc is 10.6.6. I got a big text from the error message what would you need to help me?
Thanks so much -
I am living in Pakistan, Lahore. I have purchased an Apple Iphone 5S online from apple store. I am facing water damage problem and there is no apple store here in Pakistan, How can I repair my phone from apple service center? Please help me
Take it to an authorized service center or Apple Store in the country where the phone originated. Apple does not sell iPhones in Pakistan, nor will they ship them to Pakistan.
-
My new ipad2 wifi often crashes from the day I bought.please help me resolve
My new ipad2 wifi often crashes from the day I bought.please help me resolve
Is it still within the 1 year warranty period?
Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom
Maybe you are looking for
-
Hello all, I have some doubts about Messages Interface used in BPM. BPM just used Abstract Message Interfaces, but to expose the Interface to sender aplication, XI need the same Message Interfaces that is declared abstract but no abstract. My questio
-
Windows Live Messenger for 5800 problem
Hi, I installed the new FW 40.0.005 for Nokia 5800 and then Windows Live Mesenger and Hotmail disappeared. I went to Ovi Store to download it again (Ovi Store) but now it says "Sorry, this item is not available for the Nokia 5800 XpressMusic.Browse
-
Why has some of my purchased music been deleted off my iPhone 5 and how do I get it back?
When I first got my phone I bought some music off iTunes and now I can't find old songs I used to have but they still appear on my iPad. Please tell me how I can get my old songs back onto my phone! I have tried to manage my iCloud too.
-
Ethernet Mac to iphone internet.
My mum only has an ethernet cable in her house. This means that i cannot use facebook messenger on my phone or check my snapchat. I tried setting up my own network but it didn't work. I whent in to system preferences, sharing, internet sharing and tu
-
Registration of time and invoicing
Hi there, We use SBO to manage a small consultancy firm where the only thing we sell is time i.e. hours of consulting. We sometimes subcontract freelancers and resell their services, but all our invoicing is based on the amount of hours of consulting