Conforming and crashing?

Hi all, so I have some 60 FPS footage I'm conforming to 24 to get a slow motion effect. My question is when I change the frame rate when ingesting in Prelude to DNXHD, it seems like nothing happens. It still is 60 FPS. Am I doing something wrong? Also, media encoder seems to be crashing everytime I try to ingest a 720 60p clip into 720 23.976 dnxhd 50. Is it my computer itself? The reason I'm conforming is because when I conform in premiere it seems to have a lot of trouble linking up the slow motion footage in Da vinci because the source media is not actually slow motion, it's just in premiere that it is. Any suggestions on how to get a slow motion that will be gradeable when I import the XML into Da Vinci?
Hope that makes sense, thanks everyone!
-Shannon

Hi Shannon,
I just tried to transcode a 720 60p clip into 720 23.976 dnxhd 50 with the latest Prelude 2.2 (77) and the AME 7.2.0 (43) on my Mac, I could transcode and ingest it successfully. I didn't see any crash as well.
So I'd like to get more information from you.
1. Could you let me know your Prelude and Media Encoder version?
2. What OS system are you using?
3. What media format of your source 720 60p clip are you using?
Thanks and best regards,
Ada

Similar Messages

HP Pavilion Elite e91804 experiencing lock-ups and crashing after LWSEP

1. Product name and number: HP Pavilion Elite e91804
2. Operating system: Windows 7 64 bit
3. No error message (other than blue screen)
4. My most recent change was sending my computer in for the Limited Warranty Service Enhancement Program, and receiving a new motherboard.
Before I sent my computer in for the LWSEP I was experiencing lock-ups and crashes only when I was multi-tasking (playing video games, listening to music, and having tabs open in firefox).
So I sent my computer in for the LWSEP to receive a new motherboard to fix these crashes, however after receiving my computer from them, the lock-ups and crashing have not been fixed and, in fact, have gotten worse. My computer will now lock-up and crash whenever I attempt to stream anything, be that music, video, etc. I can still occasionally play video games, assuming that I am doing nothing else, and that my computer cooperates with me (not locking up), but this only happens about 1/3 of the time.
My main confusion is that sending my computer in was supposed to fix my problem, not make it worse. Any help would be greatly appreciated.

1. Product name and number: HP Pavilion Elite e91804
2. Operating system: Windows 7 64 bit
3. No error message (other than blue screen)
4. My most recent change was sending my computer in for the Limited Warranty Service Enhancement Program, and receiving a new motherboard.
Before I sent my computer in for the LWSEP I was experiencing lock-ups and crashes only when I was multi-tasking (playing video games, listening to music, and having tabs open in firefox).
So I sent my computer in for the LWSEP to receive a new motherboard to fix these crashes, however after receiving my computer from them, the lock-ups and crashing have not been fixed and, in fact, have gotten worse. My computer will now lock-up and crash whenever I attempt to stream anything, be that music, video, etc. I can still occasionally play video games, assuming that I am doing nothing else, and that my computer cooperates with me (not locking up), but this only happens about 1/3 of the time.
My main confusion is that sending my computer in was supposed to fix my problem, not make it worse. Any help would be greatly appreciated.

My itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible

my itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible

i think i might have a solution... i have windows vista and after i installed to latest itunes update everytime i tried to open it it would freeze. I tried everything, including uninstalling itunes and all of its components and reinstalled it numerous times. So i went to the itunes folder in my folders, not on itunes, and i deleted my itunes library and playlists. After that it worked just fine, all of my music was deleted but luckily i had my files saved elsewhere.
I hope this helped! I know its frustrating and APPLE/ITUNES NEED TO FIX THE PROBLEM!!!!

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing. It appears from these forums that a lot of people are having the same problems wit this latest update.

Hi erastyle,
Actually the Licensing information for the package is missing hence it is not launching any applications. You need to Reserialize the products using APTEE which you can find it on the Machine where you have created the package. If you dont have the access to that Machine then please download and install Creative Cloud Packager and it will download APTEE in the below mentioned location.
Windows:
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\CCP\utilities
Once downloaded please follow this KB article to use the Tool.
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
Please let us know if it helps.
Regards,
Abhijit

Error and crash upon saving

Hi,
I am experiencing an issue very similar to the one described in (http://forums.adobe.com/message/243559#243559). I have several RH projects that have started crashing/closing when I save changes. The projects are all several years old, of varying sizes (15-200 topics), and were converted when I upgraded to RH 8 last fall. Initially, I had some trouble with the conversions, but attributed it to working with a trial version of the software while waiting for the company purchase of the full license. After receiving the license code and installing the available patches, the projects seemed to function fine for close to a month before this started happening.
Other information:
·        I am using: Windows XP Professional SP3, Intel T2500 @ 2.00GHz, 2.00 GB RAM, RH 8.0.2.208. (RH HTML)
·        I archive files on a network drive, but work on all projects on a local drive.
·        The projects are not under source control.
·        I do not have this issue when working with the RH CCC sample project.
I tried deleting the .cpd file before opening the project. The project still crashes upon changing and saving any topic.
I created a new project and imported some topic files. The project worked fine until I closed and re-opened it. Then, the project returns to crashing upon saving. I tried this several times with exactly the same result.
I don’t understand how this is related, but the only success I’ve had is deleting a line of HTML from the topics that references a javascript. If I remove the following line from a topic (save and crash the project) and then re-open the project (the change removing the line of code does save), I can then successfully save changes in that topic without crashing RH.
<script language="javascript" src="writetitle.js" type="text/javascript"></script>
I have been able to repeat these results with multiple topics. If I put the line back in, the project crashes upon saving – take it back out and I can save changes to that topic again. I can close and re-open the project and it performs the same.
The code is used in conjunction with a master template that contains a feedback form. The project crashes upon saving whether or not the topic is not using that template.
I hate to simply remove this line of code since I don’t really understand how or if that is fixing the problem and because that is what lets me know which topic any feedback is pertaining to. Thanks for any help.
TNSdoc2

I don't know javascript from HTML. Here is what has worked for me. I open the Broken Links dialog. I open a listed topic using the Edit button. I find and fix the broken link. I save the topic. RH8 crashes. I jump to my open RoboSource screen and check in the topic that just crashed. When I reopen the RH8 project, the link generally shows as fixed and I can move on to the next.
In the event the check in function failed, RH8 displays a dialog asking whether I want to leave or replace the local topic from RoboSource. I have found that using the Merge button has resolved the issue so that the project remains active and the link is repaired.

IDVD and DVD Studio Pro hang and crash since 10.5.6 update

Seems like there are a lot of problems since this 10.5.6 update... I came here b/c of a prob with iDVD and DVD Studio Pro not working anymore. Was just trying to "Share/Export" an iMovie project to iDVD (and then tried again with DVD Studio Pro) and the program just hung and crashed and also wouldn't let me Restart or Shutdown very easily either. What gives?

nmctech,
Have you tried to reset the SMU/PRAM?
http://support.apple.com/kb/HT1436?viewlocale=en_US
Chris
Message was edited by: 2point5

Firefox does not open at all and crashes. What is wrong?

Up until recently Firefox was working fine. When I try to open Firefox no window opens, no page loads, all I get it the crash reporter telling me that Firefox had a problem and crashed. I have un-installed and re-installed Firefox once thinking this would help. It didn't. The only thing I can think of is that it might be my Norton software. Even then I had Norton before Firefox started crashing.
BuildID: 20100722155716
CrashTime: 1284692404
InstallTime: 1281502238
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 120
StartupTime: 1284692404
Throttleable: 1
URL:
Vendor: Mozilla
Version: 3.6.8
This report also contains technical information about the state of the application when it crashed.

Hello everyone.
Hopefully this support article is what you need:
https://support.mozilla.com/en-US/kb/Firefox+will+not+start
In any case, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

I just updated to 4.0.1 and I get the "We're sorry. Firefox had a problem and crashed. We will try to open your tabs/windows when Firefox restarts" However, it just keeps popping back up, firefox never restarts!!!

This morning I had a popup on my Windows XP PC stating that the 4.0.1 update was available. I upgraded. now, i receive the following error: We're sorry. Firefox had a problem and crashed. We will try to open your tabs/windows when Firefox restarts. You can submit crash report data, blah blah blah (which i have submitted several)
But, firefox DOES NOT ever open. It just pops back up with that same report window, over and over.

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

After I updated Firefox to 33.1, I haven't been able to use it. I open it and it tries to open a page and crashes immediately. I have already tried to reinstall

I updated Firefox to 33.1 like a dutiful Firefox user. Since then, I haven't been able to successfully use Firefox. It tries to open a page and crashes immediately. I can't access any Mozilla support through Firefox. I have uninstalled Firefox and redownloaded Firefox multiple times in an effort to solve the problem. I always send the Crash report but it seems to do nothing to solve the issue.

We're sorry to hear that Firefox is crashing when you open it. Please do the following to give us crash IDs that will help us understand more about the crash.
#'''(OS X 10.6 or previous)''' Click the '''Finder''' icon in the dock. Your home folder will be selected. In the right side of the window, click the Library folder to open it. Then open the "Application Support" folder, the "Firefox" folder, the "Crash Reports" folder and finally the "submitted" folder.<br>'''(OS X 10.7 or above)''' Click the '''Finder''' icon in the dock. On the menu bar, click the '''Go''' menu, hold down the '''option''' or '''alt''' key and select '''Library'''. A window will open containing your Library folder. Then open the "Application Support" folder, the "Firefox" folder, the "Crash Reports" folder and finally the "submitted" folder.
#Open the 5 most recent files with a text editor and copy the IDs.
#Paste each ID with '''bp-''' into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

Firefox crashes upon start with the error message: Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.

I have tried to open firefox multipul times only to receive the error message:
We're Sorry
Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.
To help us diagnose and fix the problem, you can send us a crash report.
When I send the report and try to restart firefox and see that I have several tabs open, but it quickly shuts down again before I can do anything other then glance at it.

http://kb.mozillazine.org/Firefox_crashes

My project gets an error message and crashes everytime I go to render or preview on AE

I have recently starting using AE on my computer, every now and then its struggled to work but I haven't had any major issues until now.
When I try to render or preview my project I've had an error message pop up saying:
"After Effects error: crash occurred while invoking effect plug-in "Shatter".
then followed by a second message
"After Effects error: Crash in progress. Last logged message was <6492> <getdepthpinflags> <5> 32:32 bit
and finally
"After Effects can't continue: sorry, After Effects has crashed. See http://www.adobe.com/support/products/aftereffects.html for known issues. If you still can't resolve this issue, please contact Adobe Technical Support (2).
it then asks me to save and crashes.
I think it may be to do with my computer specs as it does struggle at times in other areas on AE
can someone tell me if i need to buy something like a new graphics card or something?
I don't have any knowledge when it comes to computer specs so heres a link to all the specifications for my computer: HP Support document - HP Support Center
please help me! need to have this project finished so if I need to buy something new for the computer i need to buy it straight away
thanks

How much ram do you have installed? Which OS? Your link to specs provides no details for your system.
What version of AE are you using down to the last decimal point?
We need to know something about your project. The kind of footage used, the size of the comp you are trying to render, the render settings are all critical information.

Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.

do not know what's going on but the Firefox crashing, and is still crashing, and crashing back again ..
This problem is not resolved for a long time 'and I wonder why not fix this problem so far?
These details.
We're Sorry
Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.
To help us diagnose and fix the problem, you can send us a crash report.

I was having the same problem.... But I keep forgetting that when you upgrade firefox... or it updates automatically... you need to right click on the firefox start up icon, go into properties, click on the compatibilities tab, and put a check in the "Run This Program As An Administrator" box, then hit apply. Start Firefox, and it should work OK. Problem is...each time you upgrade firefox and/or I think Adobe flash... you need to make sure that box is checked. This is on Firefox 15.0.1 with Adobe Flash 11.4.402.278 all up to date, Windows 7 64bit. If Firefox has Adobe flash add-on, it needs to run in admin mode or it will crash.

Firefox worked before, but now, when i try to start it, i get and error "We're sorry. Firefox had a problem and crashed". I tried to reinstall it, to reboot, nothing helps.

Hi,
Firefox worked before, but one time my system crashed. When I rebooted, Firefox won't start anymore. All I got is a pop-up window, saying We're sorry. Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts. Problem is it never restarts. When I press Restart Firefox button, I get the same message. I tried to reinstall Firefox, to make a new profile, rebooted the system, nothing works. What can be done ? Thank-you.

Of course I checked firefox crashes. I searched and haven't found my problem. I used Firefox 5 when it happened, then, seeing it doesn't work no matter what I do, I upgraded to 6. The same problem. So it's not 5 or 6 related. Computer probably wrote something to hard disk when it crashed and now the file is corrupted and prevents Firefox from starting. I don't know what file (or part of the registry) is. I could erase everything, but that would mean I will lose every Firefox settings and I don't want that. Now I am using Google Chrome to write this. I miss my Firefox. :( What else can I do ?
This is the error I get when I try to start Firefox:

Safari keeps freezing and crashing on my macbook. Won't let me 'force quit', re-start or shut down. HELP!

Sometimes when I am surfing the internet each website gets slower and slower to load, and eventually the little loading rainbow icon just keeps going round and round and it has frozen and crashed. What concerns me also is the fact that when this happens it won't even let me 'force quit Safari'. Although I can still bring other applications up (other than the internet), it won't let me shut down or restart either. The only way to get the internet working again is to press the power button which I know I shouldn't do, but what choice do I have when it won't let me force quit, restart or shut down?
I am up to date with all the software updates. Because I was having this crashing problem I downloaded both iBoostUp (off app store) and MacKeeper off the internet to scan for hidden viruses etc, but it still hasn't eradiated the problem.

Tell us what Extensions you put there; if no extension, what other apps you installed BEFORE this began to occur.
You must fall under one of these situations.

Conforming and crashing?

Similar Messages

Maybe you are looking for