Conforming problem on file import

First things first: I'm working with an Asus P6XP58D-E motherboard, Intel I7 950, Nvidia Quadro FX 580, 8GB DDR3 memory and Windows 7 64bits, all with 1 month of use only.
The first problem: It takes aproximately 5 to 7 minutes to load Premiere Pro CS5 with the splash screen stuck on "exporterquicktimehost.prm". Now, I've been reading a lot about this matter and seems like everyone says its firewall or antivirus problems regarding the relation between Premiere and Quick Time. So I followed every piece of advice that I got on it in order to allow adobe and quick time to freely use internet. Firewall exclusions, antivirus exclusions and also turned them off to try but nothing change. Nevertheless this issue being realy anoing, I could go with if it wasn't for the second problem;
The second problem: I shoot with a Nikon D300s DSLR camera at 24fps, 720 x 1280, and the sound format is 11.025hz 16bit. Now, I now Premiere has support for these formats altough when starting a new project it doesn't have an option that uses these video and sound formats together. All options for my video format use a 44.000hz or 48.000hz sound format. That makes premiere have to conform the files as I import them wich should not be a problem. But this is exactly the reason why I'm writing this post!!! As premiere starts conforming the first file, well, it never finishes! The software crashes and freezes making me have to open the "Task Manager" to be able to close it because it completely stops responding. And thats the big issue. Maybe I could convert the audio with soundbooth, I know, but premiere should be working perfectly and not giving such trouble.
So here is my cry for for help! Especialy for the second problem.
Apreciate any help.

OK! At the top part (where it does not scroll) It says " Version 5.0.3 (005 (MC:218798)) " and At the very begining of the scrolling part of the screen it says "Adobe Premiere Pro v5.0, Scully".
But I have good news! I solved both problems with only 1 solution: both issues were being caused by the Quicktime I had and the Ace Mega Codec pack. I tried to open my Quicktime and it didn't start. No errors, no messages, nothing AT ALL, just double-click and nothing going on. I started searching for help in the internet and found this wonderfull tip in a discussion forum in the Apple site (can I say Apple here? well for now I'm saying it but please let me know if I can't) about this codec pack problem and then I remembered I read about how PPR comunicates with QT (thanks to you) so it hit me!
The thing is, te Ace Mega Codec Pack was not alowing Quicktime to work with Adobe softwares and caused Premier to take forever to initiate and freeze and crash when I imported any video file for the program wasn't able to conform the video files without Quicktime acces.
The solution couldn't be easier, simply erase the Ace Mega Codec Pack! Can you believe it!? So simple to do but so complicated to find out. Looking back now it sounds like a foolish obvious joke and makes me wanna laugh. Almost can't believe this gave me 4 days of trouble and bad sleep. Hahahahahahaa. Erasing the code pack made Quicktime function corectly and with that Premiere could finaly come to its swiftness and perfection. Just for the record, I unistalled Quicktime and Premiere, restarted my PC, reinstalled them both and restarted again and I use version 7.55.90.70 of Quicktime.
So everything working fine now.
Thanks a lot for the good will to help, I realy apreciated it.

Similar Messages

  • Weird InDesign CC problems - opening file/importing pics

    I just upgraded to the newest InDesign CC (9.1) - now when I go to open a file from one of my external drives (I tried opening files from two different usb external drives), if I wait more than about 2 seconds, it's as though the operation cancels itself and the open file box goes away. The same thing happens if I try to import a photo into a photo box. -command e-, the import photo box comes up, then a couple seconds later, it disappears.
    InDesign doesn't crash, or crap out or anything.
    Here's the weird thing. If I go fast enough clicking on a file to open or photo to import, it works. But only if I do it within 2 seconds?!?!?!
    The even weirder part.... if I try importing the same way but I only do it from my local system hd, no problem.... the box will stay open as long as I want until I click the file I want.
    This is the strangest thing I've ever encountered in InDesign!!!!!
    Can anyone offer some insight to this, besides the fact that I have Gremlins in my InDesign?!?!?!
    Thanks,
    Blair

    I posted this on the forum page thread:
    To "populate each window" : after hitting the "place" command keys (cmd+d) on the mac, the window that opens is EMPTY of files and folders. The delay is several minutes now, also on every subsequent window down the path to the actual file that I want to import. Meanwhile, these files are immediately visible in the finder windows when clicking on the desktop. My OX is Yosemite 10.10.1. This lag happens before getting to the stage of seeing the miniature in the mouse pointer.
    Is this a known issue in the new CC inDesign 2014? Is Adobe aware of it?

  • Getting Started with FCE - Problems with my imported files

    Hi,
    I'm trying to get started with Final Cut Express, but I'm experiencing lots of problems when I import my project from iMovie.
    My project contains video, which I imported into iMovie at 960 x 540. It also contains some keynote animations, which I exported from Keynote as quicktime files.
    When I export my files to FCE, I instantly get problems.
    1) When I add the imported file to the sequence, I get an "Attention the clip does not match the sequence's setting or any of your sequence settings" error.
    2) Whether I choose to translate my settings or not, I try to play the video in the timeline, but there is a continuous beeping sound, no audio from my video and when it hits the keynote animations, it just says "unrendered" or "media offline".
    Please can you offer any advice on how I can get started with FCE more successfully.
    Thanks!

    Hi(Bonjour)!
    (please specify iMovie and FCE version)
    Well, your sequence settings in FCE should be DV-PAL 48 Khz.
    Create a new sequence.
    From iMovie and Keynote, export your movie with quicktime conversion andd select DV-PAL 48 kHz (*And Not* DV Stream...). This material should play without rendering because his format and codec match the sequence's codec.
    Import your files and everything should be OK.
    Michel Boissonneault
    The audio should be AIFF 48 kHz 16 bit linear PCM

  • File Importer Problem

    I am working with footage from a DVD converted by a program called "Handbrake" into MP4.The message: "File importer detected an inconsistency in the file structure of [file name]" appears in the events monitor (yellow triangle bottom right of workspace.) I have a yellow line that turns to red above the timeline. Jerky playback and poor video quality. What should I do from here? I tried re-interpreting and conforming the square pixel footage to DV/NTSC with no results. The aspect ratio is 698x466 but there is no way to adjust (that I could see).
    May or may not be related but Premiere has been stalling regularly upon program start-up and closing. This with all my projects.
    My system is 64-bit Vista 8 GB RAM, and includes a Matrox MX02 Mini
    File Path: F:\Premiere Projects\20090901 Marlon GC\Marlon Set 2.mp4
    Type: XDCAM-EX Movie
    File Size: 10.1 GB
    Image Size: 698 x 466
    Pixel Depth: 32
    Frame Rate: 29.97
    Source Audio Format: 48000 Hz - compressed - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00:58:57:06
    Average Data Rate: 2.9 MB / second
    Pixel Aspect Ratio: 0.8901

    The file improter error message came when I imported the files.
    I don't have the original DVD or its folder, just the MP4 files that were converted by Handbrake sometime last year. No BPAV folder, although I did not know I could import a DVD folder. Anyway, that's all I have - the dimensions are 698x466 and it plays the same in the Adobe Media Player as in the Matrox Player. I suppose i can get with Matrox as well since it's their box (MX02 Mini). 

  • FLV import Problem / .264 files slow

    Hey,
    for my work I have to use hours of .flv files daily. These are VODs from Twitch which I have to edit. Being stream related content these files often get "corrupted" because of internet connection/Twitch problems. In the .flv files this is not really a problem - most of the time you see a brief stutter but everything else is fine. Now I obviously can not import .flv files into Premiere Pro CC so I used FLV Extract to export a .aac and .264 file from the FLV container. These files import just fine into Premiere Pro but the main problem here is that when working with a .264 file the previews render VERY slow and often red frames appear. Also when exporting a file it takes MUCH time and barely uses my CPU at all (tested with other files and formats and they worked just fine).
    It is also interesting to note that the .aac and .264 files have different lengths and thus get out of sync. How much depends on the source .flv file (most likely how much it got corrupted due to various reasons?)
    My PC specs are 32 GB RAM, GeForce GTX760 Video Card, I7-4790 CPU & 3 7200 RPM HDDs
    Media Info
    Original .flv file
    General
    Complete name                            : E:\Projects\0.flv
    Format                                   : Flash Video
    File size                                : 237 MiB
    Duration                                 : 30mn 1s
    Overall bit rate                         : 1 101 Kbps
    Tagged date                              : UTC 2014-06-10 20:38:05
    Tagging application                      : flvmeta 1.1-r213
    Video
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : [email protected]
    Format settings, CABAC                   : Yes
    Format settings, ReFrames                : 4 frames
    Codec ID                                 : 7
    Duration                                 : 30mn 1s
    Bit rate                                 : 941 Kbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Constant
    Frame rate                               : 29.970 fps
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 0.015
    Stream size                              : 208 MiB (88%)
    Audio
    Format                                   : AAC
    Format/Info                              : Advanced Audio Codec
    Format profile                           : LC
    Codec ID                                 : 10
    Duration                                 : 30mn 1s
    Bit rate                                 : 125 Kbps
    Channel(s)                               : 2 channels
    Channel positions                        : Front: L R
    Sampling rate                            : 44.1 KHz
    Compression mode                         : Lossy
    Delay relative to video                  : 24ms
    Stream size                              : 28.4 MiB (12%)
    .264 file
    General
    Complete name                            : E:\Projects\0.264
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    File size                                : 207 MiB
    Video
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : [email protected]
    Format settings, CABAC                   : Yes
    Format settings, ReFrames                : 4 frames
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Variable
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Now my first question would be: why has Premiere Pro such difficulties when working with these .264 files? Do I lack any codecs? Are some settings in Premiere Pro wrong? Is there any workaround or solution? As long as Premiere Pro works fine with these files I wouldn't mind them being out of sync since I can fix that manually.
    I also tried using FFMPEG to change the container from .flv to .mp4 which worked and resulted in me being able to import the files into Premiere Pro but even though the video and audio track had the same length this time - they were still out of sync and much more difficult to re-sync them if at all possible so this didn't help much. I also tried video converter programs to convert to other file formats but the out of sync problem still carried over.
    So as an alternative question: is there any way to convert the original .flv files properly so I am able to import and work with them? Meaning they are still in sync and keep the original quality.
    The solutions should be as efficient as possible (quick) since I have to go through hours of content every day.
    I am very grateful to anyone trying to help. It is VERY much appreciated. Thanks.
    (for a test file you can download a flv file using www.twitchtools.com with the video link http://www.twitch.tv/trumpsc/b/537543702 - a corrupted part that ALWAYS speeds up is in the first few minutes (if you download part 7) when he opens the arena rewards when the key comes down)

    I very much appreciate the help. Sorry for any lack of clarity or apparent density on my part. Up late last night.
    I have a single internal drive formatted "Mac OS Extended (journaled)". It is a 160GB drive with 20GB free.
    I have two maxtor FW 400 160GB drives. Each with about 80GB free. One plugged into the back of the computer, one into the front. Not daisy chained.
    I have a P2 Store which connects via USB 2, and the HVX which I connect to the FW 800 port on the back of the computer.
    Like I said, I've tried every conceivable combination of these devices. I've imported directly from the camera via FW to the internal drive using FCP. I've gone from the camera directly to both of the FW drives using FCP. I've also transferred from the camera, to the internal drive, then imported using FCP from the internal to the FW drive set as my scratch disc. And so forth.
    But no matter what the permutation, I get the same result. And again, it doesn't seem to be an issue of moving these blocks of data around. That seems to happen just fine as far as I can tell. If I start the import, then watch the clips being created in the capture folder, they agregate just fine. It's only once they've reached their full data size (in ref'c to the original mxf files) that the import process hangs. The larger the clips, the longer the hangs (though fewer in number, obviously).
    I deleted the FCP preferences and repaired permissions on my internal HDD with no alteration of the problem.
    The only other observation I've had, is that when the hangups happen, and the little ball starts spinning, I also hear a high pitched whining from inside the computer case. It does not sound like usual HDD work.
    Hope that I've given a better sense of the situation. Thanks for bearing with me
    GPL
    PowerMac G5 Dual 2Ghz Mac OS X (10.3.9) 2.5 GB RAM

  • I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

    I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

    When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
    A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds.  Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
    -DH

  • Hi, i have problem, when i press " File Import Video Frames to layers " please i need solve it fast. waiting.....

    hi, i have problem, when i press " File > Import >Video Frames to layers " he say to me [could not complete the video frames to layers command because photoshop does not support video on this version of windows]  so please i need solve it fast...

    We can't know. You have not provided any system info, no details about your video files nor do we actually know what version of what program you are referring to.
    Mylenium

  • Pro Tools files imported to FCP X causing QuickTime movie problem

    Well 2 days later and hours on the phone with Apple tech support Senior Advisors, and problem still not solved. HELP. 
    Everything works fine in FCP X, but when I create the QuickTime movie, it is way out of sync (by many seconds).
    We have isolated the problem to audio files that I am exporting to Pro Tools, processing, and then importing back into FCP X. I can create a QuickTime movie with the original video/audio and it is fine.
    Information
    The original video came from Canon HF M40 camcorder: AVCHD (using MPEG4-AVC / H.264 compression codec), MTS format. Audio is 48kHz, 24 bits.
    I used ClipWrap to rewrap the video into ProRes 422 and decompress the audio and save as LPCM.
    I simply provide this FYI. As I said earlier, the original video works fine and the resulting QuickTime movie works fine. So the original  files imported into the FCP project are not the problem.
    The creation of the problem audio occurs as follows:
    - Detach the original audio from the original video, and export
    - Import this audio into a 48.0 kHz/16-bit Pro Tools HD session and EQ/limit the audio
    - Import the resulting audio into FCP X (exact same length file, audio waveforms aligned with the original audio).
    This audio works fine in FCP. It is in sync with the video, everything looks great.
    I ran Pro Tools at 16-bits because a senior advisor told me FCP runs at 16-bits but does not convert imported stand-alone audio (as opposed to combined video/audio) to 16-bits; thus the Pro Tools session had to be at 16-bits. I changed from 24-bits to 16-bits, and this didn't solve the problem. (FYI, when Pro Tools imports the original audio exported from FCP, it says the audio is 24-bits, not 16-bits).
    What is the problem?
    The basic question is why does this audio cause QuickTime a problem?
    Something is going on in the conversion to the QT movie. In FCP X, I don't have a way to play with the conversion variables except to set "Video and Audio" and "Use current settings" (which is ProRes 422).
    The only difference I see between the original audio and the Pro Tools audio is that the original audio is stereo and Pro Tools works with dual mono files (L & R). The mono files work fine in FCP and I can't imagine why QT would have a problem with these, but I haven't tried converting the files to stereo before importing into FCP.
    I should also mention that I selected the stabilization and roll correction algorithms in FCP. I assume these don't create problems in QT. I mention this because I didn't use them when I tested making a QT movie with the original video/audio files.
    FCP and Pro Tools are used together all the time to do exactly what I am doing......improve the sound of the original audio. They are the premier video and audio professional programs. Of course, the final product is often not a QuickTime movie, but many times it is a QT movie.
    What the heck is going on???
    HELP.

    (1) It is immediately out of sync. It even appears to be speeded up to me initially, but this is subjective. But it is clearly out of sync throughout, not a gradual drift.
    (2) When I create the audio files in the Pro Tools session, the files are automatically stored in the audio folder of the  Pro Tools session. So I don't actually have to go through an export process. I just close the Pro Tools session, then open FCP X and import the audio from the Pro Tools folder.
    I'm not sure what additional specifications you seek, other than:
    - wav files
    - sample rate = 48 kHz
    - Bit rate = 16-bits (and earlier I used 24-bits)
    - Files are dual mono, rather than stereo (name_01.L.wav, name_01.R.wav). As I mentioned above, I have not yet tried converting these to stereo before importing into FCP, to see if dual mono causes an issue with QT. It does not cause a problem in FCP. I will try this today if we don't solve the problem.
    (3) I can upload a portion of the audio to a server and send you a link to the file so you can download it. Is there a way to private message on the forum so I can get an email address to send you the link?
    (4) The original video came from Canon HF M40 camcorder: AVCHD (using MPEG4-AVC / H.264 compression codec), MTS format. Audio is 48 kHz, 24 bits.
    I used ClipWrap to rewrap the video into ProRes 422 and decompress the audio and save as LPCM.
    The FCP Project was set up at:
    - Starting time code - 01.00.00.00
    - Format - 1080p
    - Resolution - 1920 x 1080
    - Frame rate - 29.97p
    - Audio channels - stereo
    - Sample rate - 48 kHz
    - Rendering format - Apple ProRes 422

  • Still having problems: "File Import Failure"

    Hi All,
    I am still having problems transferring clips to Time Line or Project window of CS4 or PPro1.5. I could copy all clips from the Sony Clip Browser(SXS Memory Card Reader) to HardDrive(not C:\drive). But when I drag clips from Hard Drive to Project Window, it says "File Import Failure" and file format (.MP4)not supported. The file shows like this:
    J:\test1\20100306210847\BPAV\CLPR\Test01\Test01.MP4
    I really would appreciate if anyone could help me from the basics..I was trying this for the last 2weeks..I have uninstalled AdobeCS4 and installed PPro1.5. Still no difference.
    My machine is a Dell 2.8GHz, 2GB DDR2RAM, plenty of internal and external HDD spaces.
    Hope some one out there might help me with step by step procedure to get it going...
    I don't know what to do now..
    Thx...Pushpa

    Hi Harm
    The BPAV folder is in HDD connected  externally via USB2. I will transfer it to D:\ drive which is internal and it's SATA drive. will give it a try. Thx for ur input for my dumb queries..I am so frustrated now..
    Ur help much appreciated.
    Pushpa

  • Problem printing PDF picture files imported from JPG using HP Colour InkJet cp1700 printer

    When I print PDF picture files imported from JPG using an HP Colour InkJet cp1700 printer, the picture spills over.  A wide range of other PDF files print OK.  Have tried things such as configuring the printer to scale to letter size, etc,, but without success.  Have a Windows 7 64 bit computer and Adobe Acrobat Pro Extended 9.5.5.  Any ideas?

    Hello there! Welcome to the forums @rt70 
    I understand you're having some issues with printing PDF files from a website on Windows 7.
    I would personally suggest trying to print from that website using a different web browser. If you're using Internet Explorer, try FireFox or Chrome, for example.
    You can also try running the Print and Scan Doctor tool, that will search and try and fix printing issues.
    If you have any issues that continue, please let me know what they are and which programs, websites, and web browsers you have tried, along with the results from running the diagnostic tool above.
    Good luck and have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Vanishing Point file import problem inAfter Effects cs3

    Hi Iam using AE CS3 and Photoshop Cs3m
    Iam verysuccesfull in creating a vanishing point file in photoshop but i am unable to import the file in AE cs3 because is not supporting the file.
    i have created the file by export to affter effects in photoshop and saved as a .vpe file but my AE cs3 is not suppoting the file i dint find in the supported files option menu aso in AE so any one can help me in this out please

    Are you using the FIle > Import > Vanishing Point (.vpe) command?
    Here's a page that shows the steps:
    http://blogs.adobe.com/bobddv/2007/05/instant_dimentionality.html

  • Problem with FILE DELETE.

    Hi,
    I am facing a wierd problem here, my requirement is to FTP the file to another server and then delete it from the directory if the FTP is successful.
    Here is my code.
    FTPClient ftp = new FTPClient();
    ftp.connect("IP_ADDRESS_OF_FTP_SERVER");
    ftp.login("userId","password");
    int ftpReply = ftp.getReplyCode();
    if(FTPReply.isPositiveCompletion(ftpReply)){
    boolean deleteSuccessful ;
    sourceFile = "C:\\FILEDELETE\\ABCD123455.csv";
    inputStream = new FileInputStream(sourceFile);
    ftpSuccessful = ftp.storeFile(completeGDGName,inputStream);
    inputStream.close();
    if(ftpSuccessful){
    fileToBeDeleted = new File"C:\\FILEDELETE\\", "ABCD123455.csv");
    System.out.println("DELETE THE FILE");
    deleteSuccessful = fileToBeDeleted.delete();
    if(deleteSuccessful){
    //Perform some other operation
    This actually deletes the the file, but "deleteSuccessful" is always 'false', when I debugged I realised that the file is deleted from the directory on my machine when 'fileToBeDeleted = new File"C:\\FILEDELETE\\", "ABCD123455.csv")' is executed. I am not sure how this is deleted before the comman delete().
    Anybody ???

    import java.io.BufferedWriter;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.FileWriter;
    import java.util.ArrayList;
    import org.apache.commons.net.ftp.FTPClient;
    import org.apache.commons.net.ftp.FTPReply;
    * Created on 01-Nov-2007
    * TODO To change the template for this generated file go to
    * Window - Preferences - Java - Code Style - Code Templates
    public class FPT_BatchFile {
         public static void main(String[] args) {
         FTPClient ftp = new FTPClient();
         ftp.connect("IP_ADDRESS_OF_FTP_SERVER");
         ftp.login("userId","password");
         int ftpReply = ftp.getReplyCode();
         if(FTPReply.isPositiveCompletion(ftpReply)){
         boolean deleteSuccessful ;
         sourceFile = "C:\\FILEDELETE\\ABCD123455.csv";
         FileInputStream inputStream = new FileInputStream(sourceFile);
         ftpSuccessful = ftp.storeFile(completeGDGName,inputStream);
         inputStream.close();
              if(ftpSuccessful){
                   fileToBeDeleted = new File("C:\\FILEDELETE\\", "ABCD123455.csv");
                   System.out.println("DELETE THE FILE");
                   deleteSuccessful = fileToBeDeleted.delete();
    }Here you go, Yeah I doubt it will compile as this is not the complete code and for the FTPClient you would need commons.net jar file from apache. For more clarity I added more code. The problem is only with
    fileToBeDeleted = new File("C:\\FILEDELETE\\", "ABCD123455.csv");which is just deleting off the file from the directory. So any idea what wrong with that ?
    Edited by: hector on Nov 6, 2007 4:02 PM

  • CS5.5 hangs on file import

    I have been using PP for several versions and have never experienced any major issues until now.  At some point in the last few weeks (cannot link it to a recent PP update, but that may be the case) I have started having extreme problems when importing files.  It started on my laptop, then I experienced the same problem on my desktop.
    I nearly always import .mov files and have had no problems in the past.  Now PP hangs randomly on file import.  It seems to work more often than not if I import one file at a time, but even then it may stop randomly on a file.  If I restart it may successfully import the file it stopped on, or it may crash again.  It is impossible to import a large batch of files at once, so working on a large project is now almost impossible.  I cannot see anything in this forum that relates to it.  I am running Windows 7 an PP version 5.5.0.  In addition my laptop version randomly shows 'pending' against different files - this changes to other files if I re-start.  If I try to re-link it can also cause a hang.
    One other change in my workflow.  I have switched from a Canon 5D mark II to a mark III.  But I can read and edit the files succesfully and play them in other applications, just as with the mark II.  But even with the mark III I successfully imported my first batch of files about a month ago and had no problems whatsoever.
    Any ideas?

    Update
    I have been researching this further.  There is a possibility that this is related to the new container format in the 5D mark III.  This camera now allows high or low compression .mov files to be created.  In the mark II they were all low compression.  The last batch that I created was high compression.  It is possible that PP is having trouble with these.  It still randomly rejects files and randomly reports some as being off-line, yet the next time I connect they are back on-line.  I created a batch of 10 with low compression and they loaded correctly, but have not tested this with a large batch of real files.  I am also checking with Canon to see what has changed.
    If anyone has any further advice or experience I'd be grateful.  In the meantime it seems that the only way I can safely process these files is to run them all through the media encode and convert them to mp4 or something similar.
    Further update
    I am gradually answering my own question here.  For anyone with a Canon 5D mark III you might be interested.
    First batch of footage shot on 5D mk III set to 1080P high compression.  This caused PP and Media Encode (ME) to crash frequently.  Even footage already loaded came back with an off-line message randomly.
    Test set of footage shot on 5D mk II worked perfectly in the same project.  There are no compression options on the mk II.
    Could not convert original batch with ME so used MPEG Streamclip to convert the batch of 100+.  Conversion worked first time.  Import into PP worked perfectly.
    Shot a test batch of 10 with the mk III in low compression and they all imported with no problems.
    This points to an incompatibility between PP/ME and the new 5D mk III low compression format files.  I'll report this as a bug to Adobe.  I have already reported it to Canon.

  • In Premiere Pro CS5.5 AVI file imports audio only - no video.

    I've got a file (one of 3) I've been given to create a smaller file (320x480) from.
    The file is an avi file and plays (video and audio) just fine in the native Windows media player. (I'm on Windows 7 Ultimate 64-bit) There are no issues of memory or HDisc space.
    Video:
    The file is 2:21:29 in length.
    720x480
    Data rate 1489kbps
    Total bitrate 1617kbps
    29 frames/second
    Audio:
    Bit rate 128kbps
    Channels 2 (stereo)
    Audio sample rate 48 kHz
    The file is about 1.6Gb
    This is one of 3 I recieved. The other two were of comparable specs and similar length (not exactly but one was longer, the other shorter.)
    The problem is that this particular file (the other two import perfectly), when imported, only comes in as an audio file. No video imports. The other files import as audio and video. No error message either.
    I've imported all kinds of video files in the past with different frame sizes, rates, and aspect ratios, and codecs, yet I've never had one that only imports the audio without the video.
    Suggestions?!

    Post in the Premiere Pro forum. This forum is for suite specific issues only.
    Bob

  • I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

    i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
    thanks
    john

    Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
    tt2

Maybe you are looking for

  • How can I find the correct file size of a layered Photoshop document?

    I need to send layered PSD files by email (Mac's Mail), and I don't use services like Dropbox. My ISP allows a maximum file size of 5 MB. I reduce the file size by reducing it to 8 MB/channel, 150 ppi and reducing the maximum size dimension to 10 inc

  • Problem with SipServerConnection in JSR180

    Hello everybody, I am developing a notification system to J2ME clients from a J2SE application, I am implementing SUBSCRIBE/NOTIFY service. My J2ME application sends SUBSCRIBEs perfectly, and receives their OK responses, but when receiving NOTIFY req

  • Chapter layout font

    Hello! Is it possible to change the font used to print "Chapter layout" in PDF? If not, is it possible to remove "Chapter layout" from Printed documentation? Thank You Célia Freitas

  • Problems with effects in Elements 6 for Mac.

    can someone please help me. I have element 6 for mac and my effects pallette has the little pictures at the top but will not work when I click on them. I had tried re-installing the software and doing the Command/Alt and Shift when starting the progr

  • Oracle ADF speed loading

    did oracle adf give application with a fast loading??? what does oracle do to make client side speed access better ???