Confuse between SAP Kernel and SAP Installation file
Dears:
My CPU is ADM 64 bit, but when i try to download the ECC5 which will be installed in linux 32 bit system from SAP site, i find the confuse between SAP Kernel and SAP instllation file.
1. In the ECC5 download page, i can see lots of oracle download file, some named DVD ORACLE RDBMS 10.2 LINUX_IA32 1 of 4 , some named Oracle 10.2.0.2. for LINUX32. So if the LINUX_IA32 is only for the CPU which is Itanium CPU?
2. I check the sap update kernel, SAP Kernel 32 bit unicode is devided by sap kernel 6.4 320-bit unicode---Linux on IA 32-bit, so if my CPU is AMD 64 bit, but my os is Linux 32 bit, if the upgrade kernel file Linux on IA 32-bit can be used for Linux 32 bit system whith 64 bit CPU, or if the Linux on IA 32-bit is just for Itanium CPU?
Hello again
I just checked the pam again, and it looks like i got it wrong. There is still 32-bit available for ECC5.
ORACLE 10.2 LINUX REDHAT EL5/IA32 32BIT 24.07.2007 Released SAP KERNEL 6.40 32-BIT
So technically it should be possible to install it the way you wanted. Sorry for my misleading post (but hey you should still consider using 64-bit :-).
Best regards, Michael
Similar Messages
-
SNC between SAP BO and SAP BW for MS Advanced Analysis
Hy experts, i have configured the SNC between SAP BO and SAP BW but for any user i have this issue:
when the user launch a Bex Query by MS Advanced Analysis, this error message occurs:
No applicable data found.
On the SAP BW system, on ST22 there is this runtime error:
CALL_FUNCTION_SEND_ERROR.
An error occurred when executing a Remote Function Call.
"SNCERR_INVALID_FRAME#A received frame is invalid/truncated or is no SNC-frame"
What happened?
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
An error occurred when executing a Remote Function Call.
An error occurred when executing a Remote Function Call.
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
Status of connection.... "CODE=CM_SECURITY_NOT_VALID CM_SEND_RECEIVED
CM_COMPLETE_DATA_RECEIVED SAPCODE=766 CONV=91584639"
Internal error code.... "RFC_IO5"
There is an error in the communication system. To clarify
and resolve the error, contact your system administrator.
Last error logged in SAP kernel
Component............ "SNC (Secure Network Communication)"
Place................ "CPIC (TCP/IP) on host ANDREA_13"
Version.............. 5
Error code........... "-12"
Error text........... "SNCERR_INVALID_FRAME#A received frame is
invalid/truncated or is no SNC-frame"
Description.......... "SncProcessInput"
System call.......... " "
Module............... "sncxx.c"
Line................. " "
The error reported by the operating system is:
Error number..... " "
Error text....... " "
User and Transaction
Client.............. 100
User................ 00000015
Language Key........ "E"
Transaction......... " "
Transactions ID..... "6A3E22E031EEF13395AE0019BBCB620C"
Program............. "SAPLRSBOLAP_BICS_PROVIDER"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 720
Kernel Release...... 720
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........."C:\Program Files\Microsoft Office\Office1"
Function Module..... "BICS_PROV_GET_INITIAL_STATE"
Call Destination.... "GBP_boe_Default"
Source Server....... "ANDREA_13"
Source IP Address... "10.101.3.80"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLRSBOLAP_BICS_PROVIDER" - in
"BICS_PROV_GET_INITIAL_STATE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 1
of the (Include) program "LRSBOLAP_BICS_PROVIDERU13".
Could you help me?
Thank's a lot and best regards.
Andrea MaravigliaCiao Andrea,
just a couple of hints:
- Did you already tried to skip logon to BOE and instead directly select BW system? this should avoid to involve snc and then BEx query should be accessible. This would be a further confirmation that issue is the SNC, even if the log you posted is pretty clear about that.
- Do you have snc installed even in local PC running MS Advanced Analysis? I Think it is necessary for the described workflow (page 24 of Admin Guide):
"With SAP BusinessObjects Enterprise as the BI platform, single sign-on works if the following conditions
are true:
u2022 BusinessObjects Enterprise XI 3.1 is configured correctly for single sign-on. For more information,
see u201CConfiguring SAP authenticationu201D in the Integration for SAP Solutions Install and Admin Guide
at http://service.sap.com/bosap-instguides SAP BusinessObjects Business Intelligence (BI) >
Integration for SAP Solutions > XI 3.1.
u2022 Secure Network Communications (SNC) is installed on each client PC. For more information, see
SAP Help Portal at http://help.sap.com SAP NetWeaver > SAP NetWeaver Library > SAP
NetWeaver by Key Capability > Security > Network and Transport Layer Security > Secure
Network Communications.
u2022 Each end user has a user account in the connected BW system."
Furthermore, if I rember correctly, there could be restriction in license using SAP Cryptographic Library (client connection is not supported: SAP notes 597059 and 397195), so you should check your SNC software.
Hope it could hep.
Regards.
Roberto. -
Hy esperts, i have configured the SNC between SAP BO and SAP BW but for any user i have this issue:
when the user launch a Bex Query by MS Advanced Analysis, this error message occurs:
No applicable data found.
On the SAP BW system, on ST22 there is this runtime error:
CALL_FUNCTION_SEND_ERROR.
An error occurred when executing a Remote Function Call.
"SNCERR_INVALID_FRAME#A received frame is invalid/truncated or is no SNC-frame"
What happened?
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
An error occurred when executing a Remote Function Call.
An error occurred when executing a Remote Function Call.
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
Status of connection.... "CODE=CM_SECURITY_NOT_VALID CM_SEND_RECEIVED
CM_COMPLETE_DATA_RECEIVED SAPCODE=766 CONV=91584639"
Internal error code.... "RFC_IO5"
There is an error in the communication system. To clarify
and resolve the error, contact your system administrator.
Last error logged in SAP kernel
Component............ "SNC (Secure Network Communication)"
Place................ "CPIC (TCP/IP) on host ANDREA_13"
Version.............. 5
Error code........... "-12"
Error text........... "SNCERR_INVALID_FRAME#A received frame is
invalid/truncated or is no SNC-frame"
Description.......... "SncProcessInput"
System call.......... " "
Module............... "sncxx.c"
Line................. " "
The error reported by the operating system is:
Error number..... " "
Error text....... " "
User and Transaction
Client.............. 100
User................ 00000015
Language Key........ "E"
Transaction......... " "
Transactions ID..... "6A3E22E031EEF13395AE0019BBCB620C"
Program............. "SAPLRSBOLAP_BICS_PROVIDER"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 720
Kernel Release...... 720
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........."C:\Program Files\Microsoft Office\Office1"
Function Module..... "BICS_PROV_GET_INITIAL_STATE"
Call Destination.... "GBP_boe_Default"
Source Server....... "ANDREA_13"
Source IP Address... "10.101.3.80"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLRSBOLAP_BICS_PROVIDER" - in
"BICS_PROV_GET_INITIAL_STATE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 1
of the (Include) program "LRSBOLAP_BICS_PROVIDERU13".
Could you help me?
Thank's a lot and best regards.
Andrea MaravigliaHi Ingo,
the runtime error occurs in this scenario:
1) Launch MS Advanced Analysis
2) Logon on SAP BO
3) Select the System connection for SAP BW where the SNC has been configured
4) Select the bex Query
5) The system response with this message: No applicable data found.
On ST22 , on SAP BW, there is the runtime error: CALL_FUNCTION_SEND_ERROR with the message:
"SNCERR_INVALID_FRAME#A received frame is invalid/truncated or is no SNC-frame".
Thank's a lot.
Best Regards.
Andrea
Edited by: Maraviglia Andrea on Jan 24, 2011 6:02 PM -
How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS
Hi
I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
Does anybody know where this file went or can somebody tell me an alternative place to get this file?
JacobPlease open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
Hope that works!
Elise -
How can we do the data migration between Oracle Applications and SAP R/3.
Hi All,
How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
Awaiting for best possible solution.
Thanks in advance.
Regards
Dharmarajuthe 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.
-
What is difference between SAP R3 And SAP IS Mills Product
HI Friends
What is difference between SAP R3 And SAP IS Mills Product
What are the futures are availables in IS MIlls
RegardsHi,
SAP R/3 is the central enterprise version. It is not specifically designed for any inducstry sectors and it can cater many of the industry types.
Is is developed for specific industries an for SMB's (small and medium business). It will have components specifically for the industry.
The SAP Mill Products component adds sector-specific functionality to an ERP system to satisfy the complex requirements of mill industries (e.g. metal, wood, paper, textiles, construction materials, and cable sectors).
These industry segments differ from others primarily in that the materials used have a large number of characteristics and variants. The materials in the segments listed above are also predominantly area-based (e.g. paper, textiles, plastic film) or length-based (e.g. cables, piping). Account must be taken of these material characteristics throughout the entire supply chain.
To cater for the particularities of these industry segments, SAP Mill Products features processes and functions that cover the entire supply-chain cycle from product design and configuration, through planning, order processing, capacity planning and production, to final delivery. Additional functions are available in costing and inventory management. SAP Mill Products are also integrated into Quality Management, Financial Accounting, and Controlling.
Prase -
Differences between SEM BCS and SAP BPC
Hello All,
Can you please let me know the differences between SEM BCS and SAP BPC. What I know is SEM BCS is an SAP product for Financial Consolidation (Legal and Management). SAP BPC is the new product taken over from Outlooksoft. It also features the consolidationa and planning functionalities. Can you please suggest which is a better product.
Regards
VikramThere is nothing like better or worse product.
BCS has some strong features like consolidation monitor, investment consolidation and for most consolidation functions, configuration is very easy. In BPC, you may have to write scripts.
BCS has BW as the backbone where for BPC 5.1 there is none. Howveer, in BPC 7.0, the BPC will rest on BI and things will be much better.
Ravi Thothadri -
IDOC type for interface between SAP ECC and SAP F&R
Hi Experts,
I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
Please help me in finding the idoc type?
Regards,
KrishanHi Denish,
You have 2 ways of loading data from R/3 to APO.
1. R/3 to BW cube to APO-BW cube to APO planning area
or
2. R/3 to APO-BW cube to APO planning area
BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO. -
Connection between Crystal Report and SAP ECC
Hi. can you help me please.
I'm testing the connection between Crystal Report and SAP ECC. I tried using the tables,
but by making the links between foreign keys does not bring data. The other way I tried was using an ABAP function module,
but using this way, Crystal will only works like a Presentation Layer because all the work was did it in ABAP;
besides that shows the limitation that I can not pass as input a table.
what is the best practice for reporting on SAP ECC using Crystal Report?
Thanks.Hi,
Crystal Reports is able to leverage tables, ABAP functions, SAP query and InfoSets.
what is the issue when using the tables ?
ingo -
Difference between Business Analyst SAP SD and SAP SD consultant
Hi friends
I need openion about what is difference between Business Analyst SAP SD and SAP SD consultant.
RajBoth the roles are more likely the same, In consulting companies like IBM, Deloitte , TCS and others SAP functional anlayst is a more popular term but if you work directly with a SAP client - SAP Business Analyst is what they refer to a functional anlayst. Most of the responsibilities are same but they are some roles which require more of ANALYST person who can gather requirements, GAP Analysis, IS - TO BE and etc and less of configuration or customization in SAP therefore they sometimes call it SAP Business Analyst but in both cases the configuration knowledge and experience about specific modules is required.
Thanks -
Differnce between SAP-XI and SAP PI
hi can any body tell me what is the differnce between SAP-XI and SAP-PI
Hi vijay,
u can get lot of information regarding PI and XI in sdn.There already exists a no. of thread.just search with keyword "XI 3.0 and PI 7.0" u can get a lot.
XI 3.0
1. J2Se adapter engine was replaced with J2EE Adapter Engine.
2. BPM was available from XI 3.0
3. Part of Netweaver 2004
PI 7.0
1XI renames as Process Integration
2.. Part of Netweaver 2004s.
3. Has all features of XI 3.0 and every SP of Pi 7.0 has a corresponding release for XI 3.0.
4. Runs on WAS 7.0 and has same features as XI 3,0
From functional point, there is no difference between XI3.0 and PI7.0. There are changes only wrt SP. For every SP release on PI7.0 a corresponding SP for XI3.0 is also released.
A comparision of the service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04
SP13 + 14 - SP05
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09
For release notes
ref:http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
There is no f'nal difference between XI 3.0 and PI 7.0. In order to bring all netweaver releases on par with each other , SAP released / renamed XI as PI and it is a part of NW04s
For every release of PI 7.0, there is a parallel Support Pack on XI.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf">SAP NetWeaver Process Integration 7.1 Overview of New Capabilities</a>
Also check these threads.
Difference between NetWeaver 2004 and NetWeaver 7.0 or 7.1
All the diff between XI 3.0 and PI 7.0
differences between xi 3.0 and pi 7.0
Difference/ changes from XI 3.0 to PI 7.0
regards
Bill -
Hello all,
Could any one tell me how the Communication between SAP XI and SAP PCK is through ..HI
There are many ways to connect XI to PCK
Refer
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f9fc190-0201-0010-0cbd-87f50e404d91
Thanks
Gaurav -
Difference Between SAP ERP, SAP A1 and SAP A1FS
Hello,
I would like to know difference between SAP ECC 6.0 , SAP ALL IN ONE (SAP A1) and SAP ALL IN ONE FAST ( SAP A1FS) ?
- Nirav.Hi,
Check the link below
http://sapport.blogspot.com/2008/08/no-clue-between-mysap-bs-erp-ecc-bbd.html
Rgds,
Suman -
Different between database lock and sap lock
Hi All,
What is different between database lock and sap lock why sap introduced locking mechanism.
Thanks
SantoshFrom a database perspective, every dialog step forms a physical and logical unit:
the database transaction.. The database lock administration can only coordinate
this type of database transaction. From an SAP point of view, however, this is
not sufficient, because SAP transactions, which are formed from a sequence of
logically related work steps that are consistent in business terms, are generally
made up of several dialog steps. SAP systems need to have their own lock
management. This is implemented using the enqueue work process. This also
ensures that the platform-independence of the lock management is maintained. -
Reg : diferrence between SeeBeyond middleware and SAP PI
Hi Guys,
Can any one please let me know the diferrence between SeeBeyond middleware and SAP PI.
Thanks,
MadhuHi chirag,
Thanks for the reply. i gone through the link.but those are very specific about their own technologies.
But, i need the diferrences for SAP PI over SeeBeyond middleware.
i mean, what is PI Great over SeeBeyond and or what can PI Do which SeeBeyond cant do.
It will be great if you can list out some points over my requirement..
Thanks,.
Madhu
Maybe you are looking for
-
Is there a bug with the latest update to iTunes because I am unable to install it, I get constant error messages if I try to open it after installing
-
Hi All, We have SharePoint Production server 2013 where users are complaining that they are not able to copy or move files from one document library to another document library using "Open with Explorer" functionality. We tried to activate publishin
-
Problems in SXI_CACHE Refresh
Dear Experts, I am facing Cache refresh problems in PI 7.0 : 1) SXI_CACHE : Last Error During Cache refresh is showing LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM error. And also Start Delta Cache Refresh / Start Complete Cache refresh are in
-
Sleep light doesn't' blink...is this normal???
I very curious/concerned about my UBMBP 17 sleep light. It doesn't blink when sleeping. The light stays solid white when my notebook is sleeping. But funny it does blinks when I manually put it to sleep... is this normal? Thanks!!!
-
Applying downpayment to invoice
Error message occuring when trying to apply downpayment to invoice.... No matching records found 'AR Down Payment' (ODPI) (ODBC-2028) Message 131-183 please assist