Confused about AD connector - Target vs Trusted

Hi All,
I'm trying to understand how to setup AD connector if I want to first perform a trusted reconciliation against AD (for first time load), then set it up as a target source (for ongoing management).
My understanding is that once the connector is installed as a trusted source, you cannot change it, right? So then how do you set it up to do an initial trusted recon to bulk load all AD accounts into OIM, then change it do regular target resource, in account management mode?
Thanks much
Alex
PS - Can you have more than one Trusted Recon connector? If I wanted to do a 1st load import of users from Peoplesoft and AD, can I have the two installed as trusted source at the same time? What's best practice here?
Edited by: alecks29 on Jul 6, 2010 8:27 AM

Hi,
As you will see, you have the resources for both types of reconciliation.
In OIM, you can have one or more resources as Trusted Source.
You have specific tasks for Target Recon and Trusted Recon:
Scheduled Tasks for Target Resource Reconciliation
AD User Target Recon
AD User Target Delete Recon
AD Group Recon
Scheduled Tasks for Trusted Source Reconciliation
AD Organization Recon
AD User Trusted Recon
AD User Trusted Delete Recon
Renato.

Similar Messages

Confuse about Configuring Oracle Warehouse Builder

newbie here... i am abit confuse on how to configure the Oracle Warehouse builder...
I have 2 database... 1 source and 1 new one...
I understand that i have to install the Runtime Repository in the database computer and the Target Schema through the client's computer...
so all this while... i am just confuse about what to install into the source database and what to install into the new database...
Please help...

Location is a logical entity in your OWB design that can be either a database schema, a flat file location, an SAP application location etc. Once you complete your design and are ready to deploy the design into the runtime environment, you will have to 'register' the locations by providing the physical details of your location to OWB (user name/password, database, hostname etc.).
I am a bit confused by your configuration - are the source and the target in two separate schemas or in the same schema? Your posts are somewhat contradictory.
If they are in two different schemas, you should:
1. Create a source module pointing to a source schema (you can then import data object structures from the source schema - i.e. you don't have to create source tables manually in OWB, but you can import them into the module automatically). This module will have a source location (for example SRC_LOC).
2. Create a target module where all your target objects will be (i.e. where the data will be loaded). This module will have a different location (TGT_LOC). In your target module you will also create the mappings.
3. When deploying, you will register SRC_LOC with the physical details of your source schema, while the target location will be registered with the physical details of the target schema. The code generated by OWB during deployment will make sure that the data is extracted from the source schema and inserted into the target schema (either by generating and using DB links or by qualifying the schemas in the extraction queries if source and target are in the same database instance).
On the other hand, if both source and target objects are in the same db schema, you can have all your objects in the same target module and you will only have to register the location of this target module when deploying (LOC_TGT).
That said, there can be a variety of reasons why there is no data in the target after you run the extract mapping that have nothing to do with locations, such as logical errors in the mapping (an inappropriate filter or a wrong join), insufficient privileges etc. I suggest you take a look in the runtime audit browser that should contain the error messages relative to your mapping.
Regards:
Igor

[SOLVED] Confused about Mobility Radeon HD 3200

I've always found hard to find good information about this card - some sources, even, contradict themselves. All what I know is that it is an integrated graphics card and that it features the RS780M chipset. These are some tips I've got from the system logs:
grep -i r600 /var/log/Xorg.0.log
[ 23.353] (II) RADEON(0): [DRI2] DRI driver: r600
[ 23.353] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 24.099] (II) AIGLX: Loaded and initialized r600
dmesg | grep -i radeon
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-hf root=UUID=ab92c2db-22b5-4fcb-a33f-2efe3f3f104c ro radeon.modeset=1 radeon.benchmark=0 radeon.tv=0 radeon.pm=0 init=/usr/lib/systemd/systemd quiet
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-hf root=UUID=ab92c2db-22b5-4fcb-a33f-2efe3f3f104c ro radeon.modeset=1 radeon.benchmark=0 radeon.tv=0 radeon.pm=0 init=/usr/lib/systemd/systemd quiet
[ 1.463857] [drm] radeon kernel modesetting enabled.
[ 1.464337] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 1.464340] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 1.464779] [drm] radeon: 256M of VRAM memory ready
[ 1.464781] [drm] radeon: 512M of GTT memory ready.
[ 1.472494] radeon 0000:01:05.0: WB enabled
[ 1.472499] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800374a5c00
[ 1.472502] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff8800374a5c0c
[ 1.472570] [drm] radeon: irq initialized.
[ 1.472672] radeon 0000:01:05.0: setting latency timer to 64
[ 1.504277] [drm] radeon atom DIG backlight initialized
[ 1.504279] [drm] Radeon Display Connectors
[ 1.504311] [drm] radeon: power management initialized
[ 2.344989] fbcon: radeondrmfb (fb0) is primary device
[ 2.441483] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 2.441486] radeon 0000:01:05.0: registered panic notifier
[ 2.441502] [drm] Initialized radeon 2.30.0 20080528 for 0000:01:05.0 on minor 0
I also found good (?) information, or at least a clearly-explained article, here. After reading it, UVD appears as the AMD's counterpart of NVIDIA's VDPAU for video acceleration.
What I'm not sure about, is:
- Does it support video acceleration? I'd like to offload video processing to the GPU, but am not sure if my card and the open-source drivers support it or not. Wikipedia's article about VDPAU states it comes from NVIDIA, but then it says it has an open-source implementation.
- What has gallium to do with it? What gallium drivers should I enable in mesa? And what about DRI drivers?
I configured mesa as follows:
./configure --prefix=/usr \
--sysconfdir=/etc \
--with-dri-driverdir=/usr/lib/xorg/modules/dri \
--with-gallium-drivers=r600 \
--with-dri-drivers=radeon \
--with-llvm-shared-libs \
--enable-gallium-llvm \
--enable-egl \
--enable-gallium-egl \
--with-egl-platforms=x11,drm \
--enable-shared-glapi \
--enable-gbm \
--enable-glx-tls \
--enable-dri \
--enable-glx \
--enable-osmesa \
--enable-texture-float \
--enable-xa \
--enable-vdpau
Not sure if I missed something, though.
I am very confused about how Linux manages graphics, and what all those layers are for. DRM, DRI, VDPAU, VA-API, gl, gl3, xv, xvmc... it's a mess!
Thanks in advance.
Last edited by Kalrish (2013-06-16 17:54:04)

The feature matrix might help. The easy part to answer is that the 3D driver is split into two parts: DRM which is part of the kernel and DRI which is in userspace and comes from the mesa package.
Xv is an Xserver extension supported by pretty much all drivers. Found in the DDX (xf86-video-*), it uses features of the card to speed up the display of video (but not decoding). It can either do this by using the "video overlay" or creating a shader.
Now if you want to use Xv but also offload decoding to the card, you need a video acceleration API. The ones to choose from are XvMC, VA-API, VDAPU in increasing order of feature support. They were developed by Xorg, Intel, Nvidia respectively but anyone is free to implement them. I don't think it's correct to call UVD a counterpart of VDPAU. UVD is a bunch of registers on newer AMD cards. And if you sent bits to those registers in the right way, you can implement VDPAU.
The other way to implement VDPAU (say if the documentation for UVD registers was not released) is to use gallium. There is a gallium state tracker which can still do it at the expense of being slower. It is a hack whereby you convert video frames to polygon textures and make the OpenGL part of the card think that it's calculating part of a 3D scene when really it's decoding video.

Confused about color vs. b/w photos for printing...and more

I reading confusing things about exporting a PDF for printing with both color and black and white images used in the same document.
If I export to PDF and do a soft-proof and it looks okay, is that sufficient? If so, what's confusing about that, since this is my first print project, which Simulation Profile do I use? Is there a chart somewhere that compares U.S. Web Coated (SWOP) v2 to let's say 80 lb Gloss book with Aqueous coating (C2S)?
I don't know what any of this means. So, is there a good article on this site, elsewhere, or an online printer who can help a rookie like me ensure I end up with a decent product?
UPrinting.com advertises a "Free Project Review" that includes the following:
Our team will run your file through a 30-point inspection, covering technical issues including:
Artwork dimensions
Bleed setup
Low resolution images
Elements that are not within the safe zone
Image clipping
Font sizes
Un-embedded fonts
Folding setup
Page scaling
Line weights
Proper text spacing (compressed/expanded)
Narrow borders that are at risk of being cut
Compliance with USPS Mailing Guidelines
Bindery setup for multi-page artwork
What should I do? Is this trustworthy as long as I get a contract proof? Is there a "Go To" online printer that everyone loves (not sure you can recommend that here) or should I seek out a local printer?
I'm using CS4 and have a file that's (maybe) ready to go but am looking at a learning curve of days if not weeks if I have to figure it all out myself.
Thanks everyone.
Paul

InDesign puts grayscale and B&W (bitmap mode) art on the Black plate, where it belongs, so if you soft proof using the CMYK profile for your expected output conditions your preview will be accurate for the grayscale and B&W images as they will appear in print. presuming your monitor is calibrated and profiled so that you can trust what you see.
Aqueous coating is applied AFTER the printing to protect, and possible enhance the glossiness of, the page (but not all coatings are glossy). This is not the same thing as printing on coated paper, which has a glossy surface and high ink holdout (and improves detail reproduction and usually will geive better color). You should be using whatever profile the printer has specified.

Confused about the battery...

Hello everyone,
I'm from Pakistan and I just switched to Mac almost 2-3 weeks ago. Since, they have proper apple authorized dealers here so I finally decided to get one for myself. I had some confusion about the battery and my system and now I'm getting very much concerned and worried as a matter of fact.
I installed coconut battery (as few people suggested me) to check my battery status. First of all, it shows the age of my Mac as 5 months, which is pretty surprising since I got a brand new one and even the condition is of a brand new one so I have no clue why did it say that.
Secondly, I would like to tell the condition of my battery:
Current Battery Charge: 3591 mAh (I'm using on battery power right now)
Maximum Battery charge: 4068 mAh
88%
Current Battery Capacity: 4068 mAh
Original Battery Capacity: 4100 mAh
99%
Additional info:
Battery-Loadcycles : 12
Age of your Mac: 5 months
Charger connected: No
Battery is charging: No
I am just concerned that my battery current capacity decreased to 99% after just 12 load cycles. Why is that? Some people tell that they have a 100% even after using it for a long time and other than that does anyone have any idea why is the age being shown as 5 months when I have only used it for 2 weeks.
I'm really confused.
Another suggestion that I want is that in Pakistan, we are having major electricity load shedding so I can't keep it on AC power most of the time so if my computer is shut-down and being charged. If the electricity goes and when it comes back and it starts charging to the point from where it left, will that waste the load-cycle or will it continue to charge it from there without wasting cycle? Does that affect the battery life? (Assuming that the computer is shut-down while being charged)
Last thing, should I use it mostly on AC power or is it better to charge it and then drain the battery and then charge it and then use. Till how much percent should I keep using on the battery power and then connect the Magsafe connector?
Please help people
I'd highly appreciate if you could answer my questions.
Thank you.

I was told that it is best to keep it plugged in and connected to the charger when you can, but if you are not able to do that then just use battery power. I just know you don't want too many cycles, which means you don't want to drain the battery completely then fully recharge it. You should calibrate the battery, which is pretty much just draining battery then recharging it, every couple of months if you keep it plugged into the charger and don't use just the battery often.

I am confused about something. How do I read a book on my MacBook Pro? I can't find the iBook app anywhere, which is what I use on my iPad. The book I want to read is in my iTunes but I can't click on it. My iBook library does not show up in iTunes.

I am confused about something. How do I read a book on my MacBook Pro? I can't find the iBook app anywhere, which is what I use on my iPad. The book I want to read is in my iTunes but I can't click on it. Some of my iBooks show up in my iTunes but they are "grayed" out. The only books that respond in iTunes are audiobooks and that's not what I'm looking for. Is this a stupid question?

Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro. If I want to read on my mac I have to use Kindle or Nook. Which means any book I've already purchased through iBooks has to be read on my iPad. Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

Confuse about the injecting entity in EJB 3.0?

Hi all,
I have an customersBean which is inherit from customersRemote and my problem is i' am little confuse about injecting the entity(customer).
Where can you apply the EntityManagerFactory is it outside on EJB or Inside the EJB? means outside EJB is use the web application or java application. i have and example.
this is inside on EJB...............
public class CustomersBean implements com.savingsaccount.session.CustomersRemote {
@PersistenceContext(unitName="SavingAccounts")
EntityManagerFactory emf;
EntityManager em;
/** Creates a new instance of CustomersBean */
public CustomersBean() {
public void create(int id, String name, String address, String telno, String mobileno)
try{
//This is the entity.
Customer _customer = new Customer();
_customer.setId(id);
_customer.setName(name.toString());
_customer.setAddress(address.toString());
_customer.setTelno(telno.toString());
_customer.setMobileno(mobileno.toString());
em = emf.createEntityManager();
em.persist(_customer);
emf.close();
}catch(Exception ex){
throw new EJBException(ex.toString());
in web application, i'm using the @EJB in customer servlets.
public class CustomerProcessServlet extends HttpServlet {
@EJB
private CustomersRemote customerBean;
blah blah inject directly coming request field from jsp.
}

Hi all,
I have an customersBean which is inherit from customersRemote and my problem is i' am little confuse about injecting the entity(customer).
Where can you apply the EntityManagerFactory is it outside on EJB or Inside the EJB? means outside EJB is use the web application or java application. i have and example.
this is inside on EJB...............
public class CustomersBean implements com.savingsaccount.session.CustomersRemote {
@PersistenceContext(unitName="SavingAccounts")
EntityManagerFactory emf;
EntityManager em;
/** Creates a new instance of CustomersBean */
public CustomersBean() {
public void create(int id, String name, String address, String telno, String mobileno)
try{
//This is the entity.
Customer _customer = new Customer();
_customer.setId(id);
_customer.setName(name.toString());
_customer.setAddress(address.toString());
_customer.setTelno(telno.toString());
_customer.setMobileno(mobileno.toString());
em = emf.createEntityManager();
em.persist(_customer);
emf.close();
}catch(Exception ex){
throw new EJBException(ex.toString());
in web application, i'm using the @EJB in customer servlets.
public class CustomerProcessServlet extends HttpServlet {
@EJB
private CustomersRemote customerBean;
blah blah inject directly coming request field from jsp.
}

Confused about logical table source

Hi,
I'm confused about logical table source(LTS), there are 'General', 'Column Mapping', 'Content' tabs in
LTS, in General tab ,there are some information,like 'Map to there tables' and 'joins',
just here, we have created relationships in physical layer and BMM layer, so I would like to ask what's the use of the 'joins' here?

Hi Alpha,
Valid query, when you establish a complex join it is always between a logical fact and dimension table.Consider a scenario,
Example:w_person_dx is an extension table not directly joined to a fact but joins to a dimension w_person_d.
When you model the person_d tables in BMM, you ll have a single logical table with w_person_d as source.If you have to pull columns from both w_person_d and w_person_dx tables in a report, you add dx table as inner join to persond table in the general tab.Now when you check your physical query, you can see the inner join fired between the two dimensions.
Rgds,
Dpka

Confused about transaction, checkpoint, normal recovery.

After reading the documentation pdf, I start getting confused about it's description.
Rephrased from the paragraph on the transaction pdf:
"When database records are created, modified, or deleted, the modifications are represented in the BTree's leaf nodes. Beyond leaf node changes, database record modifications can also cause changes to other BTree nodes and structures"
"if your writes are transaction-protected, then every time a transaction is committed the leaf nodes(and only leaf nodes) modified by that transaction are written to JE logfiles on disk."
"Normal recovery, then is the process of recreating the entire BTree from the information available in the leaf nodes."
According to the above description, I have following concerns:
1. if I open a new environment and db, insert/modify/delete several million records, and without reopen the environment, then normal recovery is not run. That means, so far, the BTree is not complete? Will that affact the query efficiency? Or even worse, will that output incorrect results?
2. if my above thinking is correct, then every time I finish commiting transactions, I need to let the checkpoint to run in order to recreate the whole BTree. If my above thinking is not correct, then, that means that, I don't need to care about anything, just call transaction.commit(), or db.sync(), and let je to care about all the details.(I hope this is true :>)
michael.

http://www.oracle.com/technology/documentation/berkeley-db/je/TransactionGettingStarted/chkpoint.html
Checkpoints are normally performed by the checkpointer background thread, which is always running. Like all background threads, it is managed using the je.properties file. Currently, the only checkpointer property that you may want to manage is je.checkpointer.bytesInterval. This property identifies how much JE's log files can grow before a checkpoint is run. Its value is specified in bytes. Decreasing this value causes the checkpointer thread to run checkpoints more frequently. This will improve the time that it takes to run recovery, but it also increases the system resources (notably, I/O) required by JE.
"""

Confused about extending the Sprite class

Howdy --
I'm learning object oriented programming with ActionScript and am confused about the Sprite class and OO in general.
My understanding is that the Sprite class allows you to group a set of objects together so that you can manipulate all of the objects simultaneously.
I've been exploring the Open Flash Chart code and notice that the main class extends the Sprite class:
public class Base extends Sprite {
What does this enable you to do?
Also, on a related note, how do I draw, say, a line once I've extended it?
Without extending Sprite I could write:
var graphContainer:Sprite = new Sprite();
var newLine:Graphics = graphContainer.graphics;
And it would work fine. Once I extend the Sprite class, I'm lost. How do I modify that code so that it still draws a line? I tried:
var newLine:Graphics = this.graphics;
My understanding is that since I'm extending the Sprite class, I should still be able to call its graphics method (or property? I have no idea). But, it yells at me, saying "1046: Type was not found or was not a compile-time constant: Graphics.

Thanks -- that helped get rid of the error, I really appreciate it.
Alas, I am still confused about the extended Sprite class.
Here's my code so far. I want to draw an x-axis:
package charts {
    import flash.display.Sprite;
    import flash.display.Graphics;
    public class Chart extends Sprite {
        // Attributes
        public var chartName:String;
        // Constructor
        public function Chart(width:Number, height:Number) {
            this.width = width;
            this.height = height;
        // Methods
        public function render() {
            drawAxis();
        public function drawAxis() {
            var newLine:Graphics = this.graphics;
            newLine.lineStyle(1, 0x000000);
            newLine.moveTo(0, 100);
            newLine.lineTo(100, 100);
I instantiate Chart by saying var myChart:Chart = new Chart(); then I say myChart.render(); hoping that it will draw the axis, but nothing happens.
I know I need the addChild method somewhere in here but I can't figure out where or what the parameter is, which goes back to my confusion regarding the extended Sprite class.
I'll get this eventually =)

Confused about standby redo log groups

hi masters,
i am little bit confuse about creating redo log group for standby database,as per document number of standby redo group depends on following equation.
(maximum number of logfiles for each thread + 1) * maximum number of threads
but i dont know where to fing threads? actually i would like to know about thread in deep.
how to find current thread?
thanks and regards
VD

is it really possible that we can install standby and primary on same host??
yes its possible and i have done it many times within the same machine.
For yours confusion about spfile ,i agree document recommend you to use spfile which is for DG broker handling if you go with DG borker in future only.
There is no concern spfile using is an integral step for primary and standby database implementation you can go with pfile but good is use spfile.Anyhow you always keep pfile on that basis you created spfile,i said you make an entry within pfile then mount yours standby database with this pfile or you can create spfile from this pfile after adding these parameter within pfile,i said cause you might be adding this parmeter from SQL prompt.
1. logs are not getting transfered(even i configure listener using net manager)
2.logs are not getting archived at standby diectory.
3.'ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION' NEVER COMPLETE ITS RECOVERY
4. when tried to open database it always note it 'always' said system datafile is not from sufficiently old backup.
5.i tried 'alter database recover managed standby database camncel' also.Read yours alert log file and paste the latest log here..
Khurram

Confused about SOAP

Hi all,
As far as I know, SOAP is initially designed to be an XML based
RPC protocol.
But Java API for XML Messaging (JAXM), which is actually a
messaging API (and not RPC), is also based on SOAP.
How do they fit to each other?
In a few words, what does actually SOAP define?
I am confused about that, can you help me?
Any idea will be appreciated.
Thank you

In a few words -- no. Try here:
http://java.sun.com/webservices/docs/1.0/tutorial/index.html

Confused about passing by reference and passing by valule

Hi,
I am confuse about passing by reference and passing by value. I though objects are always passed by reference. But I find out that its true for java.sql.PreparedStatement but not for java.lang.String. How come when both are objects?
Thanks

Hi,
I am confuse about passing by reference and passing
by value. I though objects are always passed by
reference. But I find out that its true for
java.sql.PreparedStatement but not for
java.lang.String. How come when both are objects?
ThanksPass by value implies that the actual parameter is copied and that copy is used as the formal parameter (that is, the method is operating on a copy of what was passed in)
Pass by reference means that the actual parameter is the formal parameter (that is, the method is operating on the thing which is passed in).
In Java, you never, ever deal with objects - only references to objects. And Java always, always makes a copy of the actual parameter and uses that as the formal parameter, so Java is always, always pass by value using the standard definition of the term. However, since manipulating an object's state via any reference that refers to that object produces the same effect, changes to the object's state via the copied reference are visible to the calling code, which is what leads some folk to think of java as passing objects by reference, even though a) java doesn't pass objects at all and b) java doesn't do pass by reference. It passes object references by value.
I've no idea what you're talking about wrt PreparedStatement, but String is immutable, so you can't change its state at all, so maybe that's what's tripping you up?
Good Luck
Lee
PS: I will venture a guess that this is the 3rd reply. Let's see...
Ok, second. Close enough.
Yeah, good on yer mlk, At least I beat Jos.
Message was edited by:
tsith

PSE 7 confusion about folder location, help needed

Here's some background: I'm using PhotoShop Elements 7 on Win XP. I have an external firewire hard drive I use for overflow/backups. Originally, this showed up as a K: drive on my system.
I added a RAID controller and two more drives to stripe as a single drive for temp space rendering movies. This ended up as a K: drive and the external moved to L: However, when I did this there were some pictures from my catalog that I had on the external drive. I have used File > reconnect missing files to handle the moves, but PSE is still confused (very).
PSE has started to mix up the RAID (K:) and external (L:) content. If I move a set of pictures (e.g. a folder of them) onto the external drive (L:) via drag and drop in the folder location view, the folder will show up empty on the L: heirarchy, but will show up as a gray folder icon in the K: RAID drive hierarchy. If I open up windows explorer, the RAID drive will appear empty. In other cases (I'm not sure when/how yet), pictures physically end up on the RAID drive itself instead of the external. I have uninstalled both the external drive and the RAID drive and reinstalled them both, but they are still getting confused in the folder view by PSE. I've also tried moving content outside of PSE and just reconnecting missing files, but it still wants to put things under the K: RAID drive instead of the external L:.
I've searched everywhere I can think of for a description of what gray folder icons in the folder location view means and can find none. I'm not sure how to convince PSE that there's nothing on the RAID K: drive and it shouldn't try to connect the two. Any suggestions?
Thanks,
Jim

Thank you! I ran psedbtool and the output shows the catalog has the wrong drive letter for the L: drive.
Is there a way to make PSE forget about the K: and L: drives that it is so confused about so that it can relearn of their existence? If I use the drive letter reassignment to fix PSE, it will break other apps that are now dependent on the current drive letter assignments. I've tried removing all files from the L: drive, but it's still remembered as part of the catalog.
Thanks,
Jim
psedbtool version 1.07
Opening catalog C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\Catalogs\Moms pics\catalog.pse7db
Photoshop Elements version:      7
Total files               :   4833
Total files missing       :      0
Total files offline       :    278
Total files wrong volume :      0
****** Volumes with warnings: 1
PSE Volume Table
Path used by PSE        : F:
Type                    : builtin_drive
Status                  : online
Total files             : 0
Total files missing     : 0
Total files wrong volume: 0
Description             : MEDIA
Serial                  : 1C2F-9805
Drive_path_if_builtin   : F:
Id                      : 32520
Path used by PSE        : M:
Type                    : builtin_drive
Status                  : online
Total files             : 938
Total files missing     : 0
Total files wrong volume: 0
Description             : FreeAgent Drive
Serial                  : 7830-2970
Drive_path_if_builtin   : M:
Id                      : 93626
Path used by PSE        : E:
Type                    : builtin_drive
Status                  : online
Total files             : 0
Total files missing     : 0
Total files wrong volume: 0
Description             : GAMES
Serial                  : 025A-4B70
Drive_path_if_builtin   : E:
Id                      : 93625
Path used by PSE        : L:
Type                    : builtin_drive
Status                  : online
Total files             : 114
Total files missing     : 0
Total files wrong volume: 0
Description             : FreeAgent Drive
Serial                  : 60AE-A816
Drive_path_if_builtin   : K:
Id                      : 31354
***** WARNING *****     : Wrong drive letter in catalog
Path used by PSE        : \\dmzhost\media
Type                    : network_drive
Status                  : offline
Total files             : 278
Total files missing     : 0
Total files wrong volume: 0
Description             : //dmzhost/media
Serial                  : //dmzhost/media
Drive_path_if_builtin   :
Id                      : 26948
Path used by PSE        : J:
Type                    : builtin_drive
Status                  : online
Total files             : 3503
Total files missing     : 0
Total files wrong volume: 0
Description             : MEDIA2
Serial                  : BAC0-B5A3
Drive_path_if_builtin   : J:
Id                      : 108
Path used by PSE        : C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\Catalogs\Moms pics
Type                    : database_relative_drive
Status                  : online
Total files             : 0
Total files missing     : 0
Total files wrong volume: 0
Description             : database relative
Serial                  : amoc:database_relative_volume
Drive_path_if_builtin   :
Id                      : 2
Windows Drives
Drive Type             Serial     Path
A:     removable_drive 0000-0000
C:     builtin_drive    9088-07F9
D:     builtin_drive    F408-1CB0
E:     builtin_drive    025A-4B70
F:     builtin_drive    1C2F-9805
G:     builtin_drive    242D-15ED
H:     readonly_drive   0000-0000
I:     builtin_drive    427D-3F6B
J:     builtin_drive    BAC0-B5A3
K:     builtin_drive    64E8-9846
L:     builtin_drive    60AE-A816
M:     builtin_drive    7830-2970
Thanks so much for your help!
Jim

Confused about schema..

I'm currently working on a project using VB 2010 Express and Oracle 11g XE. On my Oracle My SQL Developer, I am currently logged on as 'user X' and I created three tables. All of which are just listed on the 'tables' tree. Does it mean that 'user X' is like a schema when compared to MySQL?
I have already integrated my database to my vb project and is working fine ATM. I'm just really confused about schemas in Oracle 11g XE.

I'm just really confused about schemas in Oracle 11g XE.http://docs.oracle.com/cd/E11882_01/server.112/e25789/intro.htm#CEGJFFFD

Confused about AD connector - Target vs Trusted

Similar Messages

Maybe you are looking for