Confused about calling an American mobile that is ...

My son is currently in Korea and he has Skpe on his mobile phone so he can call us. I would like to call him but I am confused about how to go about this without getting huge international fees. Do i need to have a plan or do I call the number that comes through on my phone using the Skype app? If I need a plan which one do I get? His phone is an American mobile but is physically in another country, does this matter at all? Obviously I have no idea how this works so any input anyone has would be wonderful! Thanks!!!

Hi, Huskymom, and welcome to the Community,
Before delving into features and subscriptions, have you tried downloading and installing the Skype software, and calling your son Skype-to-Skype? Skype calls between Skype users are always free of charges.
What is Skype? http://www.skype.com/en/what-is-skype/
Calling, seeing, messaging and sharing with others – wherever they are.
Get started
This is all free...
Your Skype account and the latest downloads.
Video and voice calls to anyone else on Skype.
Instant messaging and file sharing.
...and you pay for these
Calls to mobiles and landlines worldwide at low rates.
Send text messages from just a few pennies (Note, you would receive reply SMS messages directly to your mobile (cell) phone.)
Get online at over two million public hotspots worldwide with Skype WiFi.
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

Confused about calling translation profile explanation In official cert guide 640-461

Hi.
On page 143 of the official ccna voice cert guide there Is an example of a translation profile where calls from the PSTN with DID range of 6xxx should be converted to 5xxx to reach the internal network.There Is an explanation of why the called rule Is used instead of the calling:
"Assigning the translation rule as a calling translation would change the caller ID of a person
calling into the organization."
I don't understand this line. Shouldn't a calling translation change the caller ID of a person calling from within the organization and not into It ?

You are saying "Calling Translation" but do you mean to say "Calling Party Transformation?"
The Calling Party Transformation is relative to the direction of the call flow.
In CUCM, on a SIP trunk, in the direction of Inbound, the Calling Party is the PSTN caller calling into your organization.

Confusion about call-by -value and call - by reference

class A{
public boolean check(String source, ArrayList arr){
//pROCESS ON ARRAYLIST
class B {
A con = new A();
String source="this is string ";
ArrayList arr = new ArrayList();
// suppose Arraylist has some elements
boolean error= false;
error = A.check(source,arr);
}Is it call by value or call by ref .
Please help
}

Object references are also passed by value. ???Yes, as demonstrated byclass Foo {
    public int bar = 0;
    public static void main(String[] args) {
            Foo foo = new Foo();
            foo.bar = 1;
            System.out.println(foo.bar);
            baz(foo);
            // if this was pass by reference the following line would print 3
            // but it doesn't, it prints 2
            System.out.println(foo.bar);
    private static void baz(Foo foo) {
        foo.bar = 2;
        foo = new Foo();
        foo.bar = 3;
}

[SOLVED] Confused about Mobility Radeon HD 3200

I've always found hard to find good information about this card - some sources, even, contradict themselves. All what I know is that it is an integrated graphics card and that it features the RS780M chipset. These are some tips I've got from the system logs:
grep -i r600 /var/log/Xorg.0.log
[ 23.353] (II) RADEON(0): [DRI2] DRI driver: r600
[ 23.353] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 24.099] (II) AIGLX: Loaded and initialized r600
dmesg | grep -i radeon
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-hf root=UUID=ab92c2db-22b5-4fcb-a33f-2efe3f3f104c ro radeon.modeset=1 radeon.benchmark=0 radeon.tv=0 radeon.pm=0 init=/usr/lib/systemd/systemd quiet
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-hf root=UUID=ab92c2db-22b5-4fcb-a33f-2efe3f3f104c ro radeon.modeset=1 radeon.benchmark=0 radeon.tv=0 radeon.pm=0 init=/usr/lib/systemd/systemd quiet
[ 1.463857] [drm] radeon kernel modesetting enabled.
[ 1.464337] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 1.464340] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 1.464779] [drm] radeon: 256M of VRAM memory ready
[ 1.464781] [drm] radeon: 512M of GTT memory ready.
[ 1.472494] radeon 0000:01:05.0: WB enabled
[ 1.472499] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800374a5c00
[ 1.472502] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff8800374a5c0c
[ 1.472570] [drm] radeon: irq initialized.
[ 1.472672] radeon 0000:01:05.0: setting latency timer to 64
[ 1.504277] [drm] radeon atom DIG backlight initialized
[ 1.504279] [drm] Radeon Display Connectors
[ 1.504311] [drm] radeon: power management initialized
[ 2.344989] fbcon: radeondrmfb (fb0) is primary device
[ 2.441483] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 2.441486] radeon 0000:01:05.0: registered panic notifier
[ 2.441502] [drm] Initialized radeon 2.30.0 20080528 for 0000:01:05.0 on minor 0
I also found good (?) information, or at least a clearly-explained article, here. After reading it, UVD appears as the AMD's counterpart of NVIDIA's VDPAU for video acceleration.
What I'm not sure about, is:
- Does it support video acceleration? I'd like to offload video processing to the GPU, but am not sure if my card and the open-source drivers support it or not. Wikipedia's article about VDPAU states it comes from NVIDIA, but then it says it has an open-source implementation.
- What has gallium to do with it? What gallium drivers should I enable in mesa? And what about DRI drivers?
I configured mesa as follows:
./configure --prefix=/usr \
--sysconfdir=/etc \
--with-dri-driverdir=/usr/lib/xorg/modules/dri \
--with-gallium-drivers=r600 \
--with-dri-drivers=radeon \
--with-llvm-shared-libs \
--enable-gallium-llvm \
--enable-egl \
--enable-gallium-egl \
--with-egl-platforms=x11,drm \
--enable-shared-glapi \
--enable-gbm \
--enable-glx-tls \
--enable-dri \
--enable-glx \
--enable-osmesa \
--enable-texture-float \
--enable-xa \
--enable-vdpau
Not sure if I missed something, though.
I am very confused about how Linux manages graphics, and what all those layers are for. DRM, DRI, VDPAU, VA-API, gl, gl3, xv, xvmc... it's a mess!
Thanks in advance.
Last edited by Kalrish (2013-06-16 17:54:04)

The feature matrix might help. The easy part to answer is that the 3D driver is split into two parts: DRM which is part of the kernel and DRI which is in userspace and comes from the mesa package.
Xv is an Xserver extension supported by pretty much all drivers. Found in the DDX (xf86-video-*), it uses features of the card to speed up the display of video (but not decoding). It can either do this by using the "video overlay" or creating a shader.
Now if you want to use Xv but also offload decoding to the card, you need a video acceleration API. The ones to choose from are XvMC, VA-API, VDAPU in increasing order of feature support. They were developed by Xorg, Intel, Nvidia respectively but anyone is free to implement them. I don't think it's correct to call UVD a counterpart of VDPAU. UVD is a bunch of registers on newer AMD cards. And if you sent bits to those registers in the right way, you can implement VDPAU.
The other way to implement VDPAU (say if the documentation for UVD registers was not released) is to use gallium. There is a gallium state tracker which can still do it at the expense of being slower. It is a hack whereby you convert video frames to polygon textures and make the OpenGL part of the card think that it's calculating part of a 3D scene when really it's decoding video.

Confused about usage of usage types (NW2004s vs. NW 7.1 vs. NW mobile 7.1)

Hello all
I'm confused about the different combination possibilities / restrictions when it comes to compare NW2004s, NW PI 7.1 PI and NW Mobile 7.1. I already consulted the Master Guides and technical installation guides but am still confused. So if someone could shed some more light on it it would be great!
We plan to implement our interfaces, whether internal (system to system) or external (customers, suppliers) using XI (now called PI, right?). But we also intend to develop and run mobile apps (occasionally conected ones). So my questions around it are:
1) Do we need to install at least two separate servers for this? I mean:
- 1 server for SAP Netweaver PI 7.1
- 1 server for SAP Netweaver Mobile 7.1
2) Or is possible to have all this on one single server using SAP Netweaver 2004s with usage types AS ABAP, PI and Mobile.
3) Is usage type AS JAVA required when choosing usage type Mobile?
4) What would you recommend for production environments (note: I'm aware of the sizing / scaling question but I'm only interested in some kind of best practices advices in terms of maintenance, patching, etc.).
Thanks anyone for some input on it
BR
Renaud

Thanks Russell and Larissa for your clarifications.
Re-checked the master guide for NW 2004s (7.0) and now found the relevant text in chapter 3.3.1 on pages 30 + 31. Must have overlooked it the 1st time.
Other questions:
a) What is the difference between a installation of NW 7.0 with usage type AS ABAP and PI compared to NW PI 7.1 ?!?
b) What is the difference between an installation of NW 7.0 with usage type AS ABAP and Mobile compared to NW Mobile 7.1 ?!?
Do the 7.1 versions contain real newer releases or is it just another packaging of same components? What are the advanteges of the 7.1 versions?
Thanks again in advance for some more clarification!
Renaud

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

I uploaded the upgrade to Photoshop Elements 12 today. I got a "dispatching error" for Photoshop Elements, but was able to download Premier elements! I did not order Premier Elements, so I'm confused (unless this was a package that I did not know about)

I uploaded the upgrade to Photoshop Elements 12 today. I got a "dispatching error" for Photoshop Elements, but was able to download Premier elements! I did not order Premier Elements, so I'm confused (unless this was a package that I did not know about). I really want the Photoshop Elements upgrade - not Premier Elements. I do hope I did not pay for both - I only want one. Help!

Maryrhire910 I am sorry that you are facing difficulty downloading and installing Photoshop Elements 12. Are you downloading the installation files from Download Photoshop Elements products | 13, 12, 11, 10? If so what specific error are you receiving?

I am so confused about iCloud. My husband says he never set it up but all is information is on both his iPad and iPhone. How can that be and do I have to have iTunes Match?

I am so confused about iCloud. My husband says he never set it up but all is information is on both his iPad and iPhone. How can that be and do I have to have iTunes Match?

"All his information" may or may not include things customarily stored in iCloud. Perhaps all the information is on both devices because they were both recently synced using the same iTunes sync.
Do you have to have iTunes Match? No. Many folks do not have iTunes Match. The music purchased from iTunes is always available to the purchaser. Other music is stored in iTunes on the person's computer.

Calling a German mobile number that is located in ...

Hello,
I'm German and I will be in Sweden soon. My boyfriend is Belgian and wants to skype me on my German mobile number because I won't have internet there. We thought about either booking an EU-Package or a Sweden-Package. As I will be in different country as the called mobile number is from, I was wondering which country the call goes to - Sweden or Germany?
Thanks!

Hi, your boyfriend will be calling a German mobile number, so a package which covers German numbers is what you need, however you will be roaming in Sweden and you will have to check what your German network is going to charge you to recieve calls in Sweden.

I'm new and confused about "connection" things

I'm new to BlackBerry--I have an 8320 Curve, I'm a small business owner and I'm not connected to a BES. I use the BB Desktop Manager to synchronize with Outlook and to back up my BB and I've done pretty well on most things, but I still have a few things I'm confused about. In this forum, I'll ask my "confusion questions" concerning data options.
I have a "pay as you go" data plan with AT&T, my provider, because there is virtually no cell reception at my home where I also work. (I'm not using my BB for email since I'm in front of my computer most of the time). I have a home network set up and I've incorporated a router that supports wireless. I've connected a netbook to the wireless network and used it to surf the Internet, so, I know my wireless connection works. I've also managed to create a wireless connection on my BB to this network and on the Home screen, it will display my wireless network's name when I'm here at home, so, I know the device is connected to my network.
BUT, I don't think I'm actually using my home wireless network...I tried the other day by browsing the Internet and then AT&T told me I incurred data charges--which I thought I shouldn't have if I wasn't using their network. Either I'm wrong about assuming they won't charge me if I use my network or I have something set up incorrectly on my BB...can anyone provide some guidance?
Next, I don't truly understand what BIS is...I searched through the KB and couldn't find anything that actually defines BIS...could somebody please explain what BIS is?
Finally, can somebody please explain the difference between "mobile network" and "wi-fi"? It seems, if I turn off "mobile network" I have no connection at all, including wi-fi. Is that the way things should be? But, I can turn off wi-fi and still get a connection (if I go outside as far from my house as possible and face south <g>).
Thanks...and now I'm off to the BB Desktop Manager forum to ask a few questions there!
Solved!
Go to Solution.

Hi and Welcome to the forums!
I can help you with one or two of your questions:
ejm1 wrote:
Next, I don't truly understand what BIS is...I searched through the KB and couldn't find anything that actually defines BIS...could somebody please explain what BIS is?
BIS is Blackberry Internet Service...a service, hosted by your carrier, that provides a conduit between internet facing email systems (e.g., Yahoo, GMail, etc.) and your BB. Inside of BIS, you create conduits for each of your email providers that you desire to receive OTA email for on your BB. BIS will check your provider on a periodic basis (documented to be every 15 minutes) and only when there is something that needs to come to your BB does it generate any traffic over the carrier network with your BB. BIS is an add-service, only available to those who, from their carrier, contract for The Blackberry Data Plan (as it is usually called) -- a generic data plan is not usually adequate to have access to BIS.
ejm1 wrote:
Finally, can somebody please explain the difference between "mobile network" and "wi-fi"? It seems, if I turn off "mobile network" I have no connection at all, including wi-fi. Is that the way things should be? But, I can turn off wi-fi and still get a connection (if I go outside as far from my house as possible and face south <g>).
Mobile Network is your carriers network...data and/or voice services provided OTA for your BB. WiFi is wireless networking (802.11a/b/g/n) through your home WAP, hotspots, etc. I don't know if turning off Mobile Networ should or should not affect your ability to continue to use WiFi...I would think they are separate, but I don't have a BB model with WiFi.
I know nothing about the pay-as-you-go programs, but from all you describe, it seems that you may well be using your carrier network at times. You will need to find out (and there are others here who know) how to shut off your carrier network yet leave WiFi running so that you don't incurr the costs of surfing via the carrier network.
Hope that helps a little!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

About call a webdynpro program in R/3 report program.

hi,experts
i am searching a report program which was written by my colleague who have left my project.
there is one button displayed on the ALV tool bar of this report program.when i push this button,a message are sent to protal and displayed in tasks,then i log into portal,double click the message,a webdynpro program will be called and used to further process.
i really want to know how i can decide to use which webdynpro program to be call and used. for example,now the R/3 program use the webdynpro program named AAA, i copy BBB from AAA,and want to replace AAA by BBB in this program, how?
i don't know how to meet this simple requirement such as upwards and confused about it. hope anyone can show me some information.
thanks in advance.

It is not that simple :).
Actually there is a workflow involvedi n this. On clicking the alv button a workflow gets triggered and the task appears in the SAP Inbox which anyway displayed in the UWL of the Portal.
just try changing the SWFVISU transaction entry for that particular task and change the applicaiton name to your new application name and re-register the system in the UWL Admin Pagem, i hope it works.
If you did not find any entry in SWFVISU, the developer might have exported the XML in UWL Administration page in the portal down load it identify the old applicaiton name nad replace it with your new application name and upload the XML
[Helpful link|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0731bbc-810b-2a10-7fb8-900f16fd3c7d]
Abhi

Confused about transaction, checkpoint, normal recovery.

After reading the documentation pdf, I start getting confused about it's description.
Rephrased from the paragraph on the transaction pdf:
"When database records are created, modified, or deleted, the modifications are represented in the BTree's leaf nodes. Beyond leaf node changes, database record modifications can also cause changes to other BTree nodes and structures"
"if your writes are transaction-protected, then every time a transaction is committed the leaf nodes(and only leaf nodes) modified by that transaction are written to JE logfiles on disk."
"Normal recovery, then is the process of recreating the entire BTree from the information available in the leaf nodes."
According to the above description, I have following concerns:
1. if I open a new environment and db, insert/modify/delete several million records, and without reopen the environment, then normal recovery is not run. That means, so far, the BTree is not complete? Will that affact the query efficiency? Or even worse, will that output incorrect results?
2. if my above thinking is correct, then every time I finish commiting transactions, I need to let the checkpoint to run in order to recreate the whole BTree. If my above thinking is not correct, then, that means that, I don't need to care about anything, just call transaction.commit(), or db.sync(), and let je to care about all the details.(I hope this is true :>)
michael.

http://www.oracle.com/technology/documentation/berkeley-db/je/TransactionGettingStarted/chkpoint.html
Checkpoints are normally performed by the checkpointer background thread, which is always running. Like all background threads, it is managed using the je.properties file. Currently, the only checkpointer property that you may want to manage is je.checkpointer.bytesInterval. This property identifies how much JE's log files can grow before a checkpoint is run. Its value is specified in bytes. Decreasing this value causes the checkpointer thread to run checkpoints more frequently. This will improve the time that it takes to run recovery, but it also increases the system resources (notably, I/O) required by JE.
"""

Confused about extending the Sprite class

Howdy --
I'm learning object oriented programming with ActionScript and am confused about the Sprite class and OO in general.
My understanding is that the Sprite class allows you to group a set of objects together so that you can manipulate all of the objects simultaneously.
I've been exploring the Open Flash Chart code and notice that the main class extends the Sprite class:
public class Base extends Sprite {
What does this enable you to do?
Also, on a related note, how do I draw, say, a line once I've extended it?
Without extending Sprite I could write:
var graphContainer:Sprite = new Sprite();
var newLine:Graphics = graphContainer.graphics;
And it would work fine. Once I extend the Sprite class, I'm lost. How do I modify that code so that it still draws a line? I tried:
var newLine:Graphics = this.graphics;
My understanding is that since I'm extending the Sprite class, I should still be able to call its graphics method (or property? I have no idea). But, it yells at me, saying "1046: Type was not found or was not a compile-time constant: Graphics.

Thanks -- that helped get rid of the error, I really appreciate it.
Alas, I am still confused about the extended Sprite class.
Here's my code so far. I want to draw an x-axis:
package charts {
    import flash.display.Sprite;
    import flash.display.Graphics;
    public class Chart extends Sprite {
        // Attributes
        public var chartName:String;
        // Constructor
        public function Chart(width:Number, height:Number) {
            this.width = width;
            this.height = height;
        // Methods
        public function render() {
            drawAxis();
        public function drawAxis() {
            var newLine:Graphics = this.graphics;
            newLine.lineStyle(1, 0x000000);
            newLine.moveTo(0, 100);
            newLine.lineTo(100, 100);
I instantiate Chart by saying var myChart:Chart = new Chart(); then I say myChart.render(); hoping that it will draw the axis, but nothing happens.
I know I need the addChild method somewhere in here but I can't figure out where or what the parameter is, which goes back to my confusion regarding the extended Sprite class.
I'll get this eventually =)

Confused about passing by reference and passing by valule

Hi,
I am confuse about passing by reference and passing by value. I though objects are always passed by reference. But I find out that its true for java.sql.PreparedStatement but not for java.lang.String. How come when both are objects?
Thanks

Hi,
I am confuse about passing by reference and passing
by value. I though objects are always passed by
reference. But I find out that its true for
java.sql.PreparedStatement but not for
java.lang.String. How come when both are objects?
ThanksPass by value implies that the actual parameter is copied and that copy is used as the formal parameter (that is, the method is operating on a copy of what was passed in)
Pass by reference means that the actual parameter is the formal parameter (that is, the method is operating on the thing which is passed in).
In Java, you never, ever deal with objects - only references to objects. And Java always, always makes a copy of the actual parameter and uses that as the formal parameter, so Java is always, always pass by value using the standard definition of the term. However, since manipulating an object's state via any reference that refers to that object produces the same effect, changes to the object's state via the copied reference are visible to the calling code, which is what leads some folk to think of java as passing objects by reference, even though a) java doesn't pass objects at all and b) java doesn't do pass by reference. It passes object references by value.
I've no idea what you're talking about wrt PreparedStatement, but String is immutable, so you can't change its state at all, so maybe that's what's tripping you up?
Good Luck
Lee
PS: I will venture a guess that this is the 3rd reply. Let's see...
Ok, second. Close enough.
Yeah, good on yer mlk, At least I beat Jos.
Message was edited by:
tsith

Confused about calling an American mobile that is ...

Similar Messages

Maybe you are looking for