Confused About DSL Settings for AEBS ?

I just switched to Quest DSL. I use their wired modem and connect it directly to the WAN on my AEBS. I haven't changed my old settings on the AEBS Internet Pane-Connect using Ethernet-Configure using DHCP. I am able to access the internet no problem, but not at the speeds advertised by Quest DSL, my ISP.
I have read on some posts that the AEBS should be configured using "PPP over ethernet". Would this make a difference in speed? Most of the the posters couldn't connect to the Internet at all using the Ethernet connection.
Anyone know the proper settings for the AEBS and the Network Settings on the computer?
On the Network side of my AEBS I have "distribute IP addresses" checked, as well as "Share a single IP address (using DHCP and NAT"). I am using 10.0.1.1 addressing.

I have read on some posts that the AEBS should be configured using "PPP over ethernet". Would this make a difference in speed?
No. If your ISP requires PPPoE then you would use PPPoE. Since your ISP does not require PPPoE you want to leave it disabled.
Anyone know the proper settings for the AEBS and the Network Settings on the computer?
It sounds like your AEBS settings are correct. Assuming your Mac is connecting via wireless, the settings are AirPort and DHCP.

Similar Messages

  • I'm confused about security settings for WRT54GS!

    So I enable G only, rename the network from linksys and save settings, then I open security settings, select WPA2, enter a password and save settings.  Now when I return to the wireless setup page do I have to hit the SES Lock icon?  When I do that it changes the name of the network.  If I don't hit that key my laptop still lists my network as a secure network.  If I hit that key then I believe it renames the network differently everytime, thus disabling auto login with the laptop.  I've had a wireless network in this house for over five years and have never found anyone but my adult children's laptops, my laptop and the desktop in the clients table, so I'm mostly experimenting here but would like to know how to do it, especially relative to the SES icon.  Thank You!

    SES - Secure Easy Setup.  You never use this until you have read the manual to understand what it does.
    SecureEasySetup is a special feature on Linksys devices that it automatically assigns your wireless network a unique wireless network name or SSID and secures your wireless connection with a push of a button. It secures your wireless connection by enabling WPA (Wi-Fi Protected Access) on your access point.

  • Confused about the instructions for installing MySQL on my OS X client

    I installed MySQL for OS X as recommended here:
    http://developer.apple.com/internet/opensource/osdb.html
    it looks like I managed to created a test database in the mysql directory, but now can't access it.
    Basically, I'm confused about what to do after installing the MySQL server about setting permissions, getting databases to be where I want them to be, etc.
    I tried download phpMyAdmin, since I am used to using that via cPanel on my ISP, but don't know how to use it on my Mac. Do I need to start up Apache to do that? And if I do that, won't it interfere with the mongrel server that I'm trying to use in the separate Ruby on Rails instructions?
    I guess I could probably do all my development online via my ISP, which supports Ruby on Rails and where it is easy to set up MySQL databases, but if I could just figure out how to use MySQL on my Mac it would be fun to try to do this development offline.
    Any hints?
    Thanks,
    doug

    Have you done anything past those instructions? like creating MySQL user accounts, granting permissions, etc?
    There's a whole lot more to running MySQL that just installing it (and I'm not sure why Apple suggest building from scratch when MySQL offer binary distributions which do all the hard work for you.
    Once installed you should follow the MySQL Post Install Instructions for guidance on setting up accounts and configuring MySQL.
    As for the PHPMyAdmin question, yes, you'll need Apache running. Whether that will conflict with any other web services you're running depends on how they're configured. I've never heard of mongrel to be able to advise further there.

  • What are correct settings for AEBS as a DSL router?

    Just bought a new AEBS to function as a wireless router for my DSL and am configuring it in OSx 10.7.3 using the airport utility setup menu on my late 2011 MBA.  My 3 y/o old AEBS connects just fine - the (ATT) westell modem and internet are functional.  The new AEBS network is detected but won't connect to internet and a message scrolls next to the wifi icon " connecting to PPPoE".  When I did the setup, I was prompted for name and password for PPPoE and supplied this .  The modem connection info says "PPP is located on the modem" and I wonder if supplying the name and pw for PPPoE was necessary for the new AEBS? Are there some settings I need to change in the configuration?  Ideas appreciated!

    If your Westell modem (actually, it is likely a gateway...a combination modem/router) is set up for "PPP is on the modem", then the AEBS should be configured to Connect Using = DHCP or Ethernet. The AEBS also needs to be configured in Bridge Mode.
    Open AirPort Utility, click on the AEBS, and click Edit
    Click the Internet tab and change to setting to "Connect Using DHCP"
    Then click the Network tab and set the Router Mode for "Off (Bridge Mode)"
    Update to save changes and restart the network by powering everything off in any order that you want. Then start the Westell device first, followed by the AEBS a minute later, etc until everything is powered back up.
    This type of setup may work OK for you.
    If not, you will need to change the Westell setup to "PPP is on the router" and then configure the AEBS to provide the PPPoE service as you did originally.
    AT&T does generally advise that the modem should be in "Bridge Mode" or "PPP is on the router" when other routers are used with the "modem". See this document for more info:
    http://www.att.com/esupport/article.jsp?sid=KB401764&cv=801,902&title=Connecting +a+non-AT%26T+provided+router+to+your+AT%26T+Internet+connection#fbid=43oi_bcpYy U

  • Making the move to 16:9, but totally confused about what settings to use!

    Hi, It seems to me that since all new TV's being sold are wide-screen, it is time for me to stop making videos in 4:3. But I am completely stumped by the procedure to work in 16:9. I have shot my footage in standard definition, 16:9. The final product will be a DVD created in DVD Studio Pro. I would like the picture to fill a widescreen TV, and.... when played on a 4:3 screen, I would like it to fill the width of the screen and be letterboxed on top and bottom.
    I think that I am correct to capture this footage into Final Cut Express, using Easy Setup, and choosing 'Anamorphic'. At least that gives me a 16:9 screen in FCE.
    But can someone tell me what settings to use in DVDSP when I when I import that video? I tried to import Anamorphic video into DVDSP, and went to Preferences, and chose 16:9 Letterbox. I got a wide screen, but my footage came in as a squished 4:3 image. I'm totally at a loss, and would very much appreciate any help you can give.
    Thanks very much, Bob

    Yes, Anamorphic is the Easy Setup you'd want to use in FCE.
    When I say it's distorted, that means anamorphic is recorded to tape squished (much like how it imports into DVDSP for you) and that the format demands being unsqueezed during playback. Sorry, if I scared you.
    The encoding settings are also available in DVDSP's Preferences under the Encoding tab.
    Also - and this is the single most important element of this workflow - in addition to setting the default Display Mode to 16:9 Letterbox, be sure to confirm that this is not overridden (for whatever reason) after you've placed your clips onto a track. So check the Inspector and make sure Display mode is correct. (It's been known to happen once in a blue moon and, if not readjusted, will mean that your DVD will not display correctly on any proper setup)

  • Confused about System Requirements for CS6 Master Collection...

    Hi there,
    For my Design Technology and Photography studies, it is recommended that I have the CS6 Master Collection installed on my laptop as well as my desktop computer (so I can still work when I'm not at school, of course) - but I'm not sure if my laptop can handle it all...
    Here's what I've got:
    Compaq Presario CQ56 laptop / notebook with:
    - 2gb RAM
    - Windows 7 Home Premium (64bit, service pack 1)
    - Intel Celeron Dual-Core CPU T3500 at 2.10GHz (I'll admit that I don't know what that entails - I know it runs things, but aside from that I'm pretty clueless)
    - Mobile Intel 4 Series Express Chipset Family (I don't really know what this is, either)
    There's some more in-depth information about it (or at least one incredibly like it, but with a single-core processor instead of a dual-core like mine) here: http://www.notebookcheck.net/Review-HP-Compaq-Presario-CQ56-Notebook.42285.0.html
    The hard drive has plenty of room on it (about 120gb), so I'm not all that worried about the space the software will take up.  All I'm really asking is "will my laptop run this as it is, or do I need more RAM / a better processor / anything else?"
    Thanks,
    Emma
    (P.S:  Yes, I know it's a pretty cheap laptop, and that the screen isn't perfect... but for my more serious work, I also plan on running the software on my home computer [which I know completely fulfils the requirements because it's exactly the same as the computers they use at school )

    Well, could all the MC apps run on this system? Probably not. Could PS, AI and ID run on it along with Acrobat? Maybe. The critical factor will be, whether they actually install. Since the screen res is too small and your memory outfit is the bare minimum, you may already hit a dead end on that when the installer refuses to proceed because the requirements are not met. If it does, then using the apps probably will work, but it won't be much fun. things will feel slow and e.g. hardware acceleration in PS not be available.
    Mylenium

  • Where are the about:config settings for a profile stored?

    I am setting up a custom firefox profile and would like to tweak some of the options that are accessed via about:config.
    I would like to know where this information is stored and whether I am able to modify these options outside of the browser.

    Thanks, I was modifying the prefs.js file the whole time but didn't realize these were the same settings from about:config. The user.js file is also useful to know.

  • How do I set the about:config settings for all users? iprism keeps prompting from authentication for users.

    When users log on and try to open Firefox 23.0.1, users are prompted with Iprism Authentication. We made changes to the firefox about:config values "network.automatic-ntlm-auth.allow.-non-fqdn" and "Network.negotiate-auth.allow-non-fqdn" to true and it works, but only works on a per user basis. How can we set this up for all users?

    I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
    [https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

  • Confused about keyboard choices for MIDI/GB??

    I'm a guitar player (well, in a very loose sense i can be called a player) and want to learn to play some keyboard while playing around with garage band. i want to do the hammond B3 sound, more than a piano sound. i'm hoping to get some advice here about a MIDI keyboard. i'm considering either a casio WK series, an Maudio 61 or 88, or maybe even something like a novation or roland A37.
    as i understand it, a "standalone" like the casio would allow me to easily take the keyboard over to a friend's house for a jam session, while the MIDI controller style would need to have a computer, speakers, etc. transported along with it. correct? this may be a big advantage for the casio.
    I see a lot of comments about the feel of the keys on different keyboards, and a number of criticisms of the casio feel in particular. but, how much difference is this really going to make to a rookie? there are some $150 guitars out there that are pretty nice, and while an $800 guitar is certainly nicer, i sound equally bad on both. is the feel/quality of the keys going to be a limiting factor? are the "pros" going to be the ones who really benefit from investing in higher quality boards like the roland?
    I appreciate any information and advice.

    Yes, 37 keys is not enough if you want to learn to play organ properly. If the Ozonic had 61 keys as well as everything it already has, it would in my opinion be the perfect controller and audio interface for the bedroom studio.
    I'm a singer with some guitar ability who can find the chords on a keyboard one-handed; I never developed much facility with two-handed playing despite a couple of years of class piano in music college.
    I got the Ozonic because I need something affordable and compact and I liked the idea of having the audio interface and the controller keyboard in one unit with FireWire.
    D. T., I think you are right. Look into 5-octave, 61-key controllers. You can play the vast majority of everything you'll need on a keyboard that size.
    By the way, up until the time of Mozart, Beethoven, and possibly Chopin, pianos had only five octaves. So you can play most classical music on such a keyboard as well.
    And today, most organs, whether Hammond or real cathedral pipe organs, use 5-octave manuals.

  • Confused about linux path for DM

    I'm having trouble enderstanding Linux path for DM
    I set this
    GW system is stored on SYS1: ie. SYS1:gwsys
    so Domain is SYS1:gwsys/gwdom
    Post Ofice is SYS1:gwsys/gwpo
    Library is SYS1:gwsys/lib
    For Library storage area I set the linux path in consoleone to
    /media/nss/SYS1/gwsys/lib
    note: can't save with no unc path in windows field so I put in
    \\server\sys1\gwsys\lib
    but consoleone on linux automatically converted this to
    /media/nss/SYS1/gwsys/lib...
    problem is when I try to create a document I get an c081 error
    can anyone point me in the right direction - have I setup correctly ?
    or is there some other issue

    bill,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Print settings for Epson 4880 Stylus Pro - confusing

    Am running LR 1.3 on a PC, Dual-Core, etc.etc. Last week I installed 1.3 and my new Epson 4880 Stylus Pro. Previously, with 1.2 I had been printing with an Epson Stylus 2200 and had no problems.
    The 4880 driver, which is the latest and only driver at this point, brings up print options that I find confusing. It may be just a matter of terminology, but when I use the settthe ings that I think are identical to Photoshop CS3 handling of printing, the image is way too dark. P'shop CS3 prints beautifully with the 4880, exactly what I see on my calibrated monitor.
    I want to let the Adobe engine handle the printing in LR, yet when I set the 4880 print setting to "No Color Adjustment" and show the proper 4880 profile in the LR settings, the resulting print is too dark. When I set it to "ICM Advanced" and enter the monitor profile, the printer profile, and the Rendering Intent, everything prints beautifully. I thought these settings, the "ICM Advanced", handed everything off to the printer, which I don't want. Am I just confused about which settings lets the Adobe engine do things? I've read Evening's LR book and anything else I can find about the Print Module, but the 4880 driver is different enough from the 2200 to create confusion. Also, the PC and Mac drivers have some different options.
    I think the 4880 driver is very similar to the 4800, so if any user can help, I'd appreciate your advice.

    Because when you start a new thread someone inevitibly gets on you for not searching for an existing thread.
    I have an HP 2509m monitor.  There is no luminance setting but according to specs it's 300 nits.  Brightness is set to 90.  I can't find anywhere that will give me the cd/m2.  I really don't think it's the monitor since my Epson R1900 does not have the same issue.  I played with the settings some more and it seems color density is the only thing that make a noticable difference.  I turned off color controls on the printer and used CS4 for color management.  Set the ICM to the right printer and paper.  That DID make a difference but not much - still very dark printout.  And I'm not talking a little darker than what's on the screen - I'm talking black where it shoud be gray.
    Here's the picture I'm having trouble with.  This is reduced in quality so I could post it, but you can still see what I'm talking about.  Note the building on the very bottom.  To the right of that are some hills that are dark green and you can make out some of the detail of a road with parked cars along it.  They're dark, but you can make them out.  In the printout, pretty much everything except the building is black.
    http://i789.photobucket.com/albums/yy173/pdeys/DSC_0067_comp.jpg
    Can you see the green hills on your monitor?
    I thought it might be the paper so I tried it with glossy instead of semigloss.  Same result.

  • Confused about my project settings - Can someone advise?

    I have some clips of my child when she was very little (i've supplied a sample at the bottom). I want to make a project with them in Premiere Elements 10.
    I've tried using Premiere Elements' auto project settings advisor (i.e placed the 1st clip of the new project onto the timeline so it can advise if the project settings are correct or not) but no matter what intial project settings i use Premiere Elements doesnt suggest auto corrected settings. So, I've used 3 different media analisis programs to tell me what properties my video clips have and they all say different things:
    1) Media info says: AVI (Mjpeg) 720x480 (3:2) 30 fps NTSC, interlaced.
    2) MovieScanner says: AVI (Mjpeg) 720x480 (4:3), 480p (progressive).
    3) MediaTab says: AVI (Mjpeg) 720x480 (3:2) 30fps, NTSC progressive.
    So, i think i can safely say the clips are AVI (motion Jpeg), but are they interlaced or progressive (it's obviouisly important for me to get this right when choosing the project settings)? I have no idea what the pixel aspect ratio and all that would be as that's getting too advanced for me.
    Can Mjpeg even be interlaced? Surely if it's lots of Jpegs put together to make a moving image then they must be progressive, or can the Jpegs themselves be interlaced?
    Here is a very small sample clip if somebody wants to download & have a look for me:
    https://skydrive.live.com/redir?resid=F587D73C02F4DBBB!2689&authkey=!ANELPbk4tYQDCDc&ithin t=file%2c.AVIhttp://
    Any tips of how someone would go about finding out these settings would be great too.
    Many thanks.

    ATR
    Your wisdom here would be greatly appreciated (again).
    I've decided to make my new movie project of my childs' 1st year in Premiere Elements 12 (not 10), and with the following settings:
    The clips i have are of her 1st year and are from the same camcorder. Unfortunently (as previously described) i changed the settings on the camcorder half way through the year. So i have 2 sets of clips i want to use if possible.
    The clips are in date order & comprise of the following 2 sets of properties (info from MediaInfo older version 0.7.47):
    Set 01:
    Format                           : JPEG
    Codec ID                         : MJPG
    Width                            : 640 pixels
    Height                           : 480 pixels
    Display aspect ratio             : 4:3
    Frame rate                       : 30.000 fps
    Color space                      : YUV
    Chroma subsampling               : 4:2:2
    Bit depth                        : 8 bits
    Scan type                        : Progressive
    Compression mode                 : Lossy
    Bits/(Pixel*Frame)               : 1.161
    Stream size                      : 144 MiB (98%)
    Set 02 (you have a copy of 1 the clips from this set (2010-12-20 - emily in jersey.avi)):
    Format                           : JPEG
    Codec ID                         : MJPG
    Width                            : 720 pixels
    Height                           : 480 pixels
    Display aspect ratio             : 3:2
    Frame rate                       : 30.000 fps
    Standard                         : NTSC
    Color space                      : YUV
    Chroma subsampling               : 4:2:2
    Bit depth                        : 8 bits
    Scan type                        : Progressive
    Compression mode                 : Lossy
    Bits/(Pixel*Frame)               : 1.158
    Stream size                      : 93.5 MiB
    Now, i have a stumbling block to solve and your advice would be hugely valued:
    What project settings should i use (i ideally want to use both sets of clips in the same project, sorry, lol)?
    I'm very tempted to use the project settings that Premiere Elements 12 suggests. It suggests a project setting for clips from set 1 (but has no idea about the settings for Set 2). There are more clips in Set 1 and so it makes sense to me (at the moment) to choose those.
    The suggested settings from Premiere Elements 12 are:
    Sony XD CAM EX 720p
    timebase 30.00 fps
    640 x 480
    square (1.0)
    no fields (progressive scan)
    30fps timecode
    The clip information that Premiere Elements 12 displays for the 1st clip in set 1 that i placed on the timeline are:
    Image size 640x480
    Frame rate 30
    Pixel aspect ratio 1.0
    Would you agree that these settings look about right, or would you still recomend the settings you previously suggested (for that clip from set 2)?
    Also, just to complicate things slightly too, i have 2 further clips that i wouldnt mind fitting in that were captured using a different camera altogether. I was not going to use them because of the incompatible frame rate, but is it possible? It doesnt matter too much if its too much of a pain becausde they are only 2 clips.
    Their settings are:
    Video
    Format                           : JPEG
    Codec ID                         : MJPG
    Duration                         : 3mn 2s
    Bit rate                         : 16.3 Mbps
    Width                            : 1 280 pixels
    Height                           : 720 pixels
    Display aspect ratio             : 16:9
    Frame rate                       : 24.000 fps
    Color space                      : YUV
    Chroma subsampling               : 4:2:0
    Bit depth                        : 8 bits
    Scan type                        : Progressive
    Compression mode                 : Lossy
    Bits/(Pixel*Frame)               : 0.738
    Stream size                      : 354 MiB (92%)
    Title                            : FUJIFILM AVI STREAM 0100
    I'll probably need further advice when the project is completed about how to ideally export the movie.
    Many many thanks.
    ps. This problem will not occur again, since i now shoot all my clips from 1 HD camera and with all the same settings, lol.
    Just in case you wish to view the 1st clip from set 1 that i placed on the timeline, i have uoploaded it to skydrive:
    https://skydrive.live.com/redir?resid=F587D73C02F4DBBB!2688&authkey=!AJb8s6PYsHAvg18&ithin t=file%2c.AVI

  • Size settings for swing components and resizing of a JFrame

    Hi all!
    I'd have the following question:
    There is a JFrame, which content panel has the GridBagLayout. In some places on that layout's grid there are JScrollPanels (let's name each as "inner panel") with JTables in the view ports.
    When user resizes the main JFrame, I'd like that all inner panels and corresponding tables would resize synchronously: if user enlarges the main JFrame, then the sizes of all those components should increase proportionally, when user makes the main JFrame smaller, then all the sizes should become proportionally less.
    I am confused with the settings for max, min and preffered sizes for inner panels as well as for their JTables. I have read about those size attributes and tried to play with them, but I can't obtain the needed result :-/
    Each inner panel has the "BOTH" value for the fill attribute in the GridBagLayout's constraints.
    Might someone help me?
    Thanks in advance!

    Hmm...
    The JPanel that contains all stuff is the JFrame's content pane...
    The entire JFrame's content pane contains another panels (JScrollPanels), which are all set to fill all available space on the parent panel (JFrame's content pane) with "both" value of the "fill" attribute.
    Should I put the only one JPanel on the JFrame's content pane and all other stuff at that additional JPanel...?

  • What are the settings for iPhone, iPad and iMac to sync ical and contacts?

    How can I get all three items to sync? What are the settings on the iMac with Lion on board? I put all my stuff on iphone but iMac & iPad do not have the items synced even though I have everything on icloud?

    They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
    Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
    You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
    It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
    Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

  • What are the settings for apn data and mms for iphone 4 on straight talk?

    what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

    They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
    Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
    You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
    It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
    Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

Maybe you are looking for