Confused about Flash versions

In Finder I do a search for Flash. In my Applications folder is flashplayer Macromedia version 7.1 r14.
Under Other, in Library/Internet Plugins is Flash Player.plugin, Adobe 10.0 r22.
At the Adobe website it tells me I have 10,0,22,87.
So what is this Macromedia version 7 doing there? What is the difference in these two? (I thought Macromedia was Adobe). Should I get rid of this version?
(I think I used Adobe's uninstall before I upgraded to version 10).
Can someone straighten me out?

So by "local" you mean files I have on my hard drive?
Yes

Similar Messages

Confused about GB versions - HELP

Which Garageband x versions are included in the iLife versions, i.e:
iLife 06 - Garageband 3?
iLife 08 - Garageband 8?
What is the significance of these numbers and how do they relate?
I ask because I just bought Pogue's Missing Manual for GB 2 and, while I guess it will be a good read, I am not sure if it is about the GB in iLife 8, which I own.
Thanks for you help.
Alan

iLife 06 - Garageband 3?
Yes
iLife 08 - Garageband 8?
iLife 08 has GB4
What is the significance of these numbers and how do they relate?
06 and 08 are the years in which the versions were released.
I am not sure if {Pogue's Missing Manual for GB 2} is about the GB in iLife 8,
not directly, but it will help with the basics.
here's what's new in GB4 (08):
http://www.bulletsandbones.com/GB/GBFAQ.html#whatsnew08
(Let the page FULLY load. The link to your answer is at the top of your screen)

[Athlon64] Confused about BIOS versions

I'm looking to upgrade my BIOS - but since the layout change in the BIOS download section, I'm confused.
1) What's the difference between Award and AMI BIOS'?
2) Am I to use an Award or AMI BIOS for my board?
3) Under the AMI BIOS's (the only ones available for my board), the Special Note says that versions 1.x and 2.x don't work with the K8T Neo-F. I'm using an earlier version - does this include my board?
Any info is appreciated. Thanks!

You install an AMI bios as a motherboard only had one bios type and yours is AMI.
See: http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=496&kind=1 for latest bios update. The latest is up the top of the list.
Don't know what the red means though so someone needs to clarify that for you.

Live Update confused about versions installed?

I have a MSI Neo4 Platinum and first I installed the Marvell LAN Drivers via Live Update (Version 7.14.1.3). This driver did however seem to be very unstable (the network connection dropped after a few minutes of use), so I went to Windows Update and picked the Marvell Driver there. It shows up under the Driver Tab as version 7.29.4.3". This driver seems very stable and my dropped connection problem is gone. I had this problem on two different installations of this board.
When I now run Live Driver, it incorrectly reports that my current version is 7.14.1.3 (not 7.29.4.3). It is obviously confused about shich version I'm running.
Anyone else seen this problem?

olavt,
Do not bother with Live Update. If you want to update anything, do it manually. Also for Mobo Drivers, usenVidia nForce Drivers
Take Care,
Richard

Confusion about third-party-libraries in different versions in CE 71.

Hi
After some research on the use of different versions of third-party-libraries in SAP netweaver CE 7.1, I am actually quite confused and would be happy if someone could shed a light on that subject....
1. Is there a way to tell netweaver CE 7.1 to use a library in my WEB-INFlib-folder by simple configuration?
E.g. we would like to use a third-party-lib in a newer version than the one which is loaded by CE 7.1. Many application server provide a simple configuration option (e.g inside META-INFapplication.xml) where the web as can be forced to use the library inside WEB-INFlib for this application.
2.Is the concept of "heavy loading" described in a blog by Georgi Danov(Using Hibernate in SAP NetWeaver Composition Environment) the answer to question 1.?
Does it also work for other third-party-libraries than hibernate? Does it work at all?
3. In the blog mentioned in question 2, Mr. Danov is talking about "shared libraries". Does this mean, that I have to forget everything about "bundled" and "standard" libraries explained in help.sap.com/CE, if I want to create a heavy loader?
He is referencing another blog (Applications and shared libraries) which is two years old? Can I still apply the information there to CE?
4. Are "Bundled libraries" applicable when using different versions of third-party-libraries in CE 7.1?
In "Working with libraries" (http://help.sap.com/saphelp_nwce10/helpdata/en/44/f4e00e56ec0486e10000000a155369/frameset.htm) it says:
"Bundled libraries: These provide resources only to a single enterprise application, and are packed inside the application's EAR file."
=>As I want to provide the lib only to my enterprise application, I will probably have to create a bundled library, right? Does this also work if netweaver CE 7.1 uses a different version of the same library?
5. Do I need Netweaver Developer Studio for creating "bundled" libraries?
Or can I copy the binaries in the WEB-INFlib-folder of my application, deploy it and use it?
6. Is configuration of application-j2ee-engine.xml the right place to reference a third-party-library in a specific version which exists in WEB-INF/lib-folder in my application even if it exists also in another version on netweaver?
=> In the document "Troubleshooting: Finding Missing Parent-Child Relations" it says: "To implement the chain of parent-child relations in the deployment descriptor of the component, use either application-j2ee-engine.xml (for applications) or provider.xml (for libraries and services)."
=> "Creating standard libraries" (http://help.sap.com/saphelp_nwce10/helpdata/en/44/f447a8d62b0484e10000000a155369/frameset.htm9 tells me, that I have to configure the file application-j2ee-engine.xml, too.
=> But in "Working with libraries" (http://help.sap.com/saphelp_nwce10/helpdata/en/44/f4e00e56ec0486e10000000a155369/frameset.htm) it says:
"Standard libraries: These provide resources to all enterprise applications deployed on the server. They are packed in EAR files like the enterprise applications."
=> Does this mean, that I have to force Netweaver CE 7.1 to use a higher version of a certain third-party-library? Does this even work? Do all applications deployed on Netweaver 7.1 have to use this library in the higher version?
It is really confusing to read through the documentation!!! Sorry for that avalanche of questions, but I really hope it will make the issue of using libraries (especially if they exist in different versions on the CE 7.1) a little clearer!
Best regards
Bettina

Hi Bettina,
I'll try to answer your questions:
>
> Hi
>
> After some research on the use of different versions of third-party-libraries in SAP netweaver CE 7.1, I am actually quite confused and would be happy if someone could shed a light on that subject....
>
> 1. Is there a way to tell netweaver CE 7.1 to use a library in my WEB-INFlib-folder by simple configuration?
>
> E.g. we would like to use a third-party-lib in a newer version than the one which is loaded by CE 7.1. Many application server provide a simple configuration option (e.g inside META-INFapplication.xml) where the web as can be forced to use the library inside WEB-INFlib for this application.
>
First of all, the appropriate docs are here: [http://help.sap.com/saphelp_nwce10/helpdata/en/44/f4e00e56ec0486e10000000a155369/frameset.htm|http://help.sap.com/saphelp_nwce10/helpdata/en/44/f4e00e56ec0486e10000000a155369/frameset.htm].
Basically what you do is define a lib project in the studio and deploy it do the server. This may be less comfortable then just configuring manually, therefore it work better in larger environments because the server checks that libs are available in all running instances - which it could not do if you manipulate diretories manually (an approach you should never attempt in any SAP envrionment)
> 2.Is the concept of "heavy loading" described in a blog by Georgi Danov(Using Hibernate in SAP NetWeaver Composition Environment) the answer to question 1.?
>
> Does it also work for other third-party-libraries than hibernate? Does it work at all?
>
If Georgi describes it, I hope so, as he is one of our developers who knows best.
> 3. In the blog mentioned in question 2, Mr. Danov is talking about "shared libraries". Does this mean, that I have to forget everything about "bundled" and "standard" libraries explained in help.sap.com/CE, if I want to create a heavy loader?
>
"shared" are all of theses libs, as otherwise they would be specific to an application.
> He is referencing another blog (Applications and shared libraries) which is two years old? Can I still apply the information there to CE?
>
This was about anearly version of CE and even Georgi updated the blog this year to talk about slight differences. So yes, this still applies.
> 4. Are "Bundled libraries" applicable when using different versions of third-party-libraries in CE 7.1?
>
> In "Working with libraries" (http://help.sap.com/saphelp_nwce10/helpdata/en/44/f4e00e56ec0486e10000000a155369/frameset.htm) it says:
>
> "Bundled libraries: These provide resources only to a single enterprise application, and are packed inside the application's EAR file."
>
> =>As I want to provide the lib only to my enterprise application, I will probably have to create a bundled library, right? Does this also work if netweaver CE 7.1 uses a different version of the same library?
>
That depends... Your application uses it's own classloader which means it should only use your libs in case there is another version available on the server. But if you're trying to deploy a lib that is used by a service of the server (int that case loaded by the server not your classloader!) I'm not so sure.
> 5. Do I need Netweaver Developer Studio for creating "bundled" libraries?
>
> Or can I copy the binaries in the WEB-INFlib-folder of my application, deploy it and use it?
>
You need the Studio. No way around that. [Edit:] Sorry, misunderstood you here: I thought you want to copy something into the deployed directory on the server! - Of course, any deployment method would do it and though copying binaries seems to be valid. However, I'm checking this currently with development in detail.
> 6. Is configuration of application-j2ee-engine.xml the right place to reference a third-party-library in a specific version which exists in WEB-INF/lib-folder in my application even if it exists also in another version on netweaver?
>
> => In the document "Troubleshooting: Finding Missing Parent-Child Relations" it says: "To implement the chain of parent-child relations in the deployment descriptor of the component, use either application-j2ee-engine.xml (for applications) or provider.xml (for libraries and services)."
>
> => "Creating standard libraries" (http://help.sap.com/saphelp_nwce10/helpdata/en/44/f447a8d62b0484e10000000a155369/frameset.htm9 tells me, that I have to configure the file application-j2ee-engine.xml, too.
>
> => But in "Working with libraries" (http://help.sap.com/saphelp_nwce10/helpdata/en/44/f4e00e56ec0486e10000000a155369/frameset.htm) it says:
>
> "Standard libraries: These provide resources to all enterprise applications deployed on the server. They are packed in EAR files like the enterprise applications."
>
> => Does this mean, that I have to force Netweaver CE 7.1 to use a higher version of a certain third-party-library? Does this even work? Do all applications deployed on Netweaver 7.1 have to use this library in the higher version?
>
>
>
> It is really confusing to read through the documentation!!! Sorry for that avalanche of questions, but I really hope it will make the issue of using libraries (especially if they exist in different versions on the CE 7.1) a little clearer!
>
> Best regards
> Bettina
Could you tell me what you're trying to deploy? I'll try to get Georgi on this....
Regards,
Benny
Edited by: Benny Schaich-Lebek on Nov 5, 2008 1:40 PM

Confusion about 990FXA GD65v2 bios.

So I just got the mobo listed in the title and I am trying to find out 100% positively if it will support Vishera (plan on getting a FX 6300) right out of the box. I keep seeing things that say it will but then I keep seeing things that contradict what I previously read. Even the box has a sticker that says B2 stepping ready but B2 stepping would be Zambezi, Vishera has C0 stepping. The US MSI page for this board has also never been updated so it really is of no help. The non-US MSI page has the nonV2 version listed but it says Vishera is supported by the 19.9 bios, which contradicts the New Egg review that claims the V2 is loaded with 19.7 bios and supports Vishera. I am very confused and just want to know if I can buy an FX 6300 for this mobo and not have to worry about flashing the bios to get it to work. Looking for definitive answers on this.

Wont swear by it but most V2 are V2 for the vishera fix. The only real issue with the Vishera is extreme overclocking. My fx8350 runs flawlessly at 4.2/4.6turbo. Havent had luck getting to 4.8. So it is worth it.
https://forum-en.msi.com/index.php?topic=162950.msg1194677#msg1194677
that is the thread most of us discuss issues and the round about to deal with any issues. I give detailed information about my issues with this mobo and how I got my stability and explain issues and the problems they caused. Could help you decide further.

[MSI Z97 Xpower AC] Confusion about about BIOS updating...

So I am a newb who has just finished his first build, using the "MSI Z97 Xpower AC" motherboard (purchased last month).
The first thing I want to do is update the BIOS.
But I am a little confused about how I should proceed.
In the manual, it describes the "M-Flash" method for updating BIOS.
But as I was reading reviews of this motherboard, there was some talk about the manual being "out-dated" in regards to BIOS update instructions. Some people suggested using some "forum method" for updating. I also see this topic which provides an alternative method for updating the BIOS:
https://forum-en.msi.com/index.php?topic=172772.0
So how do you think I should proceed with updating the BIOS?
Really, what is the safest method?

Quote from: JLio01 on 31-March-15, 07:54:03
Forum tool is safer, M-Flash is easier. (my pov..)
I agree with that. Although for this motherboard (any with Dual BIOS), it should not matter whether it's safer or not, as you can always restore bricked BIOS by using secondary one
As you are using very first version of BIOS (v1.0) you can either use >>This One<< for MFlash which is latest official available v1.7 from MSI's product website OR for latest official/BETA BIOS to be used with Forum flash tool, you have to ask Svet to prepare a file for you (simply ask for it on current topic)
But the real question is: do you have any issues with your system that BIOS will fix it?? Because if your reason to flash is "I want latest", then forgive me, but that's the worst "reason" you might ever have.

How do I change my flash settings? I said I wanted to be prompted about flash wanting to store things on my computer but the prompts are too frequent and annoying!

How do I change my flash settings? I said I wanted to be prompted about flash wanting to store things on my computer but the prompts are too frequent and annoying!

New versions of Flash have a panel installed on your system for control of settings.
In Windows XP, Windows Start > Settings > Control Panel > Flash Player, click on each tab and change the "Ask..." setting. Most likely your prompts are coming from the "Storage" tab. Using any of the "Block..." settings may make Flash inoperative on some sites.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

About flash player issue on Nokia E6 with all upda...

Hello there! Here complaining about flash player. As you see my attachment of this post my phone pops out flash player error when i choose to play flash content. At first it pop out that there is server error and by the time it pops out second error that my flash player doesnt support 17th version of flash. This error show up using different web content via internet. For example via app. Same error occurs on the web browser.Does not matter which browser is used but all the time it show same error. When i press flash content flash box goes to blank and left upper corner show flash icon. I have last updated of OS, but both error of time still exist. Whats i should to do and whats i am doing wrong? Anyone have the same error after Belle or Belle refresh version is installed?
Model of phone : Nokia E6
Product Code: 0588127
Software information: 111.140.0058
Custom version: 111.140.0058.C00.01
Flash: 4.0
Link where i cannot play flash content video: http://m.diena.lv/diena-tv/izklaide/video-ka-skan-pasaules-klases-orkestris-kad-to-dirige-garamgajej...
Attachments:
Printscr000099.jpg ‏35 KB
Printscr000098.jpg ‏25 KB
Printscr000095.jpg ‏53 KB

Hi 7absinth49,
You mentioned that you already performed an update with the phone, have you tried doing a reset on the phone itself? If not yet, you can do this one, but make sure that you created first a back up for every files that you have on the phone.

Latest flash version will not display images or video

Latest flash version will not display images or video in 2 x Windows 7 Pro 64bit machines, 1 x Windows 7 Home Premiums, and 1 x XP SP3 under VMWare Workstation 7. Problem plagues Firefox, Chrome, and IE on all systems. Also running Norton Security from Comcast on all machines. Disabling does not appear to help. Suggestions?

Not sure, this is the one that I really want to view. I am using the latest 11.6 ending in 168. Curious you got the images. The product ones act like they should be displaying for me but don’t. Can you do a capture of the images? The text with small images sometimes comes through and sometimes not. I wonder if there is a problem on the server end.
When I talk to the Customer Service people they claim to have no reports of problems, but like the sports pro about to be traded, they may be the last ones to know…

Confused about extending the Sprite class

Howdy --
I'm learning object oriented programming with ActionScript and am confused about the Sprite class and OO in general.
My understanding is that the Sprite class allows you to group a set of objects together so that you can manipulate all of the objects simultaneously.
I've been exploring the Open Flash Chart code and notice that the main class extends the Sprite class:
public class Base extends Sprite {
What does this enable you to do?
Also, on a related note, how do I draw, say, a line once I've extended it?
Without extending Sprite I could write:
var graphContainer:Sprite = new Sprite();
var newLine:Graphics = graphContainer.graphics;
And it would work fine. Once I extend the Sprite class, I'm lost. How do I modify that code so that it still draws a line? I tried:
var newLine:Graphics = this.graphics;
My understanding is that since I'm extending the Sprite class, I should still be able to call its graphics method (or property? I have no idea). But, it yells at me, saying "1046: Type was not found or was not a compile-time constant: Graphics.

Thanks -- that helped get rid of the error, I really appreciate it.
Alas, I am still confused about the extended Sprite class.
Here's my code so far. I want to draw an x-axis:
package charts {
    import flash.display.Sprite;
    import flash.display.Graphics;
    public class Chart extends Sprite {
        // Attributes
        public var chartName:String;
        // Constructor
        public function Chart(width:Number, height:Number) {
            this.width = width;
            this.height = height;
        // Methods
        public function render() {
            drawAxis();
        public function drawAxis() {
            var newLine:Graphics = this.graphics;
            newLine.lineStyle(1, 0x000000);
            newLine.moveTo(0, 100);
            newLine.lineTo(100, 100);
I instantiate Chart by saying var myChart:Chart = new Chart(); then I say myChart.render(); hoping that it will draw the axis, but nothing happens.
I know I need the addChild method somewhere in here but I can't figure out where or what the parameter is, which goes back to my confusion regarding the extended Sprite class.
I'll get this eventually =)

PSE 7 confusion about folder location, help needed

Here's some background: I'm using PhotoShop Elements 7 on Win XP. I have an external firewire hard drive I use for overflow/backups. Originally, this showed up as a K: drive on my system.
I added a RAID controller and two more drives to stripe as a single drive for temp space rendering movies. This ended up as a K: drive and the external moved to L: However, when I did this there were some pictures from my catalog that I had on the external drive. I have used File > reconnect missing files to handle the moves, but PSE is still confused (very).
PSE has started to mix up the RAID (K:) and external (L:) content. If I move a set of pictures (e.g. a folder of them) onto the external drive (L:) via drag and drop in the folder location view, the folder will show up empty on the L: heirarchy, but will show up as a gray folder icon in the K: RAID drive hierarchy. If I open up windows explorer, the RAID drive will appear empty. In other cases (I'm not sure when/how yet), pictures physically end up on the RAID drive itself instead of the external. I have uninstalled both the external drive and the RAID drive and reinstalled them both, but they are still getting confused in the folder view by PSE. I've also tried moving content outside of PSE and just reconnecting missing files, but it still wants to put things under the K: RAID drive instead of the external L:.
I've searched everywhere I can think of for a description of what gray folder icons in the folder location view means and can find none. I'm not sure how to convince PSE that there's nothing on the RAID K: drive and it shouldn't try to connect the two. Any suggestions?
Thanks,
Jim

Thank you! I ran psedbtool and the output shows the catalog has the wrong drive letter for the L: drive.
Is there a way to make PSE forget about the K: and L: drives that it is so confused about so that it can relearn of their existence? If I use the drive letter reassignment to fix PSE, it will break other apps that are now dependent on the current drive letter assignments. I've tried removing all files from the L: drive, but it's still remembered as part of the catalog.
Thanks,
Jim
psedbtool version 1.07
Opening catalog C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\Catalogs\Moms pics\catalog.pse7db
Photoshop Elements version:      7
Total files               :   4833
Total files missing       :      0
Total files offline       :    278
Total files wrong volume :      0
****** Volumes with warnings: 1
PSE Volume Table
Path used by PSE        : F:
Type                    : builtin_drive
Status                  : online
Total files             : 0
Total files missing     : 0
Total files wrong volume: 0
Description             : MEDIA
Serial                  : 1C2F-9805
Drive_path_if_builtin   : F:
Id                      : 32520
Path used by PSE        : M:
Type                    : builtin_drive
Status                  : online
Total files             : 938
Total files missing     : 0
Total files wrong volume: 0
Description             : FreeAgent Drive
Serial                  : 7830-2970
Drive_path_if_builtin   : M:
Id                      : 93626
Path used by PSE        : E:
Type                    : builtin_drive
Status                  : online
Total files             : 0
Total files missing     : 0
Total files wrong volume: 0
Description             : GAMES
Serial                  : 025A-4B70
Drive_path_if_builtin   : E:
Id                      : 93625
Path used by PSE        : L:
Type                    : builtin_drive
Status                  : online
Total files             : 114
Total files missing     : 0
Total files wrong volume: 0
Description             : FreeAgent Drive
Serial                  : 60AE-A816
Drive_path_if_builtin   : K:
Id                      : 31354
***** WARNING *****     : Wrong drive letter in catalog
Path used by PSE        : \\dmzhost\media
Type                    : network_drive
Status                  : offline
Total files             : 278
Total files missing     : 0
Total files wrong volume: 0
Description             : //dmzhost/media
Serial                  : //dmzhost/media
Drive_path_if_builtin   :
Id                      : 26948
Path used by PSE        : J:
Type                    : builtin_drive
Status                  : online
Total files             : 3503
Total files missing     : 0
Total files wrong volume: 0
Description             : MEDIA2
Serial                  : BAC0-B5A3
Drive_path_if_builtin   : J:
Id                      : 108
Path used by PSE        : C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\Catalogs\Moms pics
Type                    : database_relative_drive
Status                  : online
Total files             : 0
Total files missing     : 0
Total files wrong volume: 0
Description             : database relative
Serial                  : amoc:database_relative_volume
Drive_path_if_builtin   :
Id                      : 2
Windows Drives
Drive Type             Serial     Path
A:     removable_drive 0000-0000
C:     builtin_drive    9088-07F9
D:     builtin_drive    F408-1CB0
E:     builtin_drive    025A-4B70
F:     builtin_drive    1C2F-9805
G:     builtin_drive    242D-15ED
H:     readonly_drive   0000-0000
I:     builtin_drive    427D-3F6B
J:     builtin_drive    BAC0-B5A3
K:     builtin_drive    64E8-9846
L:     builtin_drive    60AE-A816
M:     builtin_drive    7830-2970
Thanks so much for your help!
Jim

Flash Version Issue

Greetings All. I have Flash 10.0.45 installed on my system but the kuler website tells me I need Flash 10.0.12 or better. I've deleted my browser cache and even rebooted my system. My package manager even verifies that Flash 10.0.45 is in fact installed. Any ideas how to get this to work? I built several color schemes last week with no problems. Now I can't even get to them.

Right-clicking on a flash animation showed "About Flash 9x" and set me on the course to figure out what was going on.
Firefox Tools>Add-ons>Plugins showed Shockwave Flash version 9x even after installing 10x
in Adept (Kubuntu Hardy Package Manager)
     purged flash-plugin-nonfree
     purged adobe-flashplugin
     reinstalled adobe-flashplugin
Shockwave Flash version is now 10.0.45.x and the kuler site works again.

Cannot install flash version 10.1.0 onto a mac 10.4.11

Hello,
I cannot install flash version 10.1.0 onto a mac 10.4.11 and therefore cannot use YouTube or the BBCIplayer. Is there a compatability problem?

I am in the same boat. I cannot watch flash videos on the BBC website or on BBC iPlayer, although all other flash videos (YouTube for example) are fine.
For reasons that passeth all understanding, they work with the PPC version of Firefox, called TenFourFoxG5.app, once you have anabled plug-ins, as it does not natively support Flash.
You can download TenFourFoxG5 from here:
http://www.floodgap.com/software/tenfourfox/
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
I am using Flash 10.1.102.64 in TenFourFox and it works just fine.

Question about Student version and CS6

Not sure if this is the right place to post this question...
So I have a question about Student&Teacher versions in CS6 - Will there be Student & Teacher version for CS6 too?
P.S Sorry if there are some grammar mistakes.
Hope You understand!
Thanks!

Thanks for the reply Bob,
I was actually referring to this exact page ( CS5.5 Production Premium, Student) http://adobe.ly/H6so7G (non-flash version because links were redirecting) where it doesnt list the offer on the left.
However, after reading this http://store.adobe.com/store/en_us/popup/offer/cs55_cs6_faq.html and this http://store.adobe.com/store/en_us/popup/offer/cs55_cs6_faqchannel.html I'm assuming it must just be an error.
It doesnt mention anything about not including student editions and all offer pages I've seen have a link to the education store.

Confused about Flash versions

Similar Messages

Maybe you are looking for