Confused About Nokia 311 v3.90
My nokia 311 current version is v7.36. I am willing to install v3.90 in my phone. Can i face any problem after install v3.90. Help me please (signhnsk)
SaidurSumon wrote:
My nokia 311 current version is v7.36. I am willing to install v3.90 in my phone. Can i face any problem after install v3.90. Help me please (signhnsk)
While Nokia Suite does not allow this, downgrading the software will render the phone inoperable.
You can set the phone to check for new updates automatically from “auto SW update” menu.
Similar Messages
-
Confusion about Nokia specs pages....
I will be getting a 920... but am saddened to hear Nokia Canada only showing black as a colour choice. So I started looking around to other places I could buy the same phone and found that different sites show different frequencies supported. Is this just a website issue or are there different versions of the phone?
I want to be careful to get a phone that will work with my chosen carrier and their LTE frequencies.
Nokia.ca shows
Operating Frequency Bands
LTE 700
LTE 1900
Meanwhile on Nokia.com for the US I see...
Operating Frequency Frequency bands
LTE 700
LTE 850
LTE 1700
LTE 1900
LTE 2100
And Nokia.fi
Käyttötaajuus Taajuusalueet
LTE 700
LTE 800
LTE 850
LTE 900
LTE 1700
LTE 1800
LTE 1900
LTE 2100
LTE 2600As much as I would like to believe that is the specs... that doesn't match Canadian frequencies so I wouldn't buy it. Not to mention it shows a completely different LTE list than what I already had.
So which one is right? Or is there more than one "920"? -
Nokia 311 asha - wifi????
Nokia, I get mad. My son bought yesterday a Nokia Asha 311. So far everything was ok. But what I do, you can not connect it to the internet via wifi!
I updated the phone recently. But it did not help.
I have read threads where other owners of that particular phone also living in pain around this problem. It would be great to hear from you how to solving the problem? But it may not be possible - your system in your phone might be bad?
Sincerely a tired dadBecause my Nokia 311 works with my Wi-Fi here, we need more information about your particular environment:
Which error message do you get, we need it word-for-word?
Which Wi-Fi access-point do you use (brand and model name, please)? -
New update availabe for asha 501, 502, 503. But what's the problem to nokia that they can not make a update for asha 311. There was some problem. So an update is need for asha 311 user. When nokia publish an update for asha 311 ?
As stated earlier, please try to explain and state what you have understood already. That makes it easier to answer you, because one knows which parts are missing and/or not understood yet! Now I have to give you an assumption of explanation, the very big picture which is a long story:
Nokia created several variants of each firmware version, for example code 059F7M7 for version 07.36. As you see, the variants are identified by the product code, in this example code 059F7M7. Your phone was targeted for a different market, therefore the label on your Nokia 311 (and its initial product code) was 059G914. Correct?
Now we have issue number one: Each firmware variant comes with a limited set of languages. I do not know why Nokia does this, but they do. Therefore, some firmware variants come with Chinese, some with Bangla, some with Thai, some with German, ‥. Consequently, here in Germany my product code is 059F730. Although I have version 07.36, I do not have Thai, although the same version is sold in Thailand—the difference is the product code.
That is the reason for not having Bangla on your phone right now: You flashed to a product code which does not have Bangla included.
The solution would be to go for the product code you had before. Now we have issue number two: The product code with Bangla did not get version 07.37. Again, I do not know why Nokia does this. Anyway, it is common practice at Nokia that some minor updates are not rolled-out globally. Still, the ‘engineers’ increase the version number.
That is the reason for not having Bangla on your phone right now: You flashed to a product code for France which does not have Bangla at all.
The solution would be to downgrade the version. Now we have issue number three: Nokia Care Tools, those which are public and available at the lower level Nokia Care Centre do not allow to downgrade firmware files. Again, I do not know why Nokia does not allow this. Anyway, it is like it is, officially nobody is able to downgrade.
Consequently, you are stuck at 07.37. Consequently, you are stuck at a product code without Bangla. The easiest solution is to sell that Nokia 311 and go for a Nokia 311 with firmware 03.81, 03.90, or 05.92. With those firmware, you can can change the product code and go for a firmware which has Bangla and version 05.92. With that version, you still have all the apps you desired so much—except the Nokia Maps app, at least you stated that.
I am an end-uer like you. I do not know all firmware variants and what is included in each. Perhaps you find a combination of Bangla and with Nokia Maps. Or you go for your old strategy and use that firmware version, to extract all these Java apps. Then you go for 07.36 and re-install them. Anyway, you cannot go for 07.37 because you are stuck without Bangla then. Therefore, it might be much easier to go for a Windows Phone. There you have Nokia Maps = HERE Maps and you are able to install all languages dynamically withouth messing around with product codes, without having to care about versions.
Now you got the long story. For the next time, please try to explain and state what you have understood already. That makes it easier to answer you, because one knows which parts are missing and/or not understood yet. In this case, you could have saved you reading time if you had done that. -
I am confused about something. How do I read a book on my MacBook Pro? I can't find the iBook app anywhere, which is what I use on my iPad. The book I want to read is in my iTunes but I can't click on it. Some of my iBooks show up in my iTunes but they are "grayed" out. The only books that respond in iTunes are audiobooks and that's not what I'm looking for. Is this a stupid question?
Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro. If I want to read on my mac I have to use Kindle or Nook. Which means any book I've already purchased through iBooks has to be read on my iPad. Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.
-
Confuse about the injecting entity in EJB 3.0?
Hi all,
I have an customersBean which is inherit from customersRemote and my problem is i' am little confuse about injecting the entity(customer).
Where can you apply the EntityManagerFactory is it outside on EJB or Inside the EJB? means outside EJB is use the web application or java application. i have and example.
this is inside on EJB...............
public class CustomersBean implements com.savingsaccount.session.CustomersRemote {
@PersistenceContext(unitName="SavingAccounts")
EntityManagerFactory emf;
EntityManager em;
/** Creates a new instance of CustomersBean */
public CustomersBean() {
public void create(int id, String name, String address, String telno, String mobileno)
try{
//This is the entity.
Customer _customer = new Customer();
_customer.setId(id);
_customer.setName(name.toString());
_customer.setAddress(address.toString());
_customer.setTelno(telno.toString());
_customer.setMobileno(mobileno.toString());
em = emf.createEntityManager();
em.persist(_customer);
emf.close();
}catch(Exception ex){
throw new EJBException(ex.toString());
in web application, i'm using the @EJB in customer servlets.
public class CustomerProcessServlet extends HttpServlet {
@EJB
private CustomersRemote customerBean;
blah blah inject directly coming request field from jsp.
}Hi all,
I have an customersBean which is inherit from customersRemote and my problem is i' am little confuse about injecting the entity(customer).
Where can you apply the EntityManagerFactory is it outside on EJB or Inside the EJB? means outside EJB is use the web application or java application. i have and example.
this is inside on EJB...............
public class CustomersBean implements com.savingsaccount.session.CustomersRemote {
@PersistenceContext(unitName="SavingAccounts")
EntityManagerFactory emf;
EntityManager em;
/** Creates a new instance of CustomersBean */
public CustomersBean() {
public void create(int id, String name, String address, String telno, String mobileno)
try{
//This is the entity.
Customer _customer = new Customer();
_customer.setId(id);
_customer.setName(name.toString());
_customer.setAddress(address.toString());
_customer.setTelno(telno.toString());
_customer.setMobileno(mobileno.toString());
em = emf.createEntityManager();
em.persist(_customer);
emf.close();
}catch(Exception ex){
throw new EJBException(ex.toString());
in web application, i'm using the @EJB in customer servlets.
public class CustomerProcessServlet extends HttpServlet {
@EJB
private CustomersRemote customerBean;
blah blah inject directly coming request field from jsp.
} -
Confused about logical table source
Hi,
I'm confused about logical table source(LTS), there are 'General', 'Column Mapping', 'Content' tabs in
LTS, in General tab ,there are some information,like 'Map to there tables' and 'joins',
just here, we have created relationships in physical layer and BMM layer, so I would like to ask what's the use of the 'joins' here?Hi Alpha,
Valid query, when you establish a complex join it is always between a logical fact and dimension table.Consider a scenario,
Example:w_person_dx is an extension table not directly joined to a fact but joins to a dimension w_person_d.
When you model the person_d tables in BMM, you ll have a single logical table with w_person_d as source.If you have to pull columns from both w_person_d and w_person_dx tables in a report, you add dx table as inner join to persond table in the general tab.Now when you check your physical query, you can see the inner join fired between the two dimensions.
Rgds,
Dpka -
Confused about transaction, checkpoint, normal recovery.
After reading the documentation pdf, I start getting confused about it's description.
Rephrased from the paragraph on the transaction pdf:
"When database records are created, modified, or deleted, the modifications are represented in the BTree's leaf nodes. Beyond leaf node changes, database record modifications can also cause changes to other BTree nodes and structures"
"if your writes are transaction-protected, then every time a transaction is committed the leaf nodes(and only leaf nodes) modified by that transaction are written to JE logfiles on disk."
"Normal recovery, then is the process of recreating the entire BTree from the information available in the leaf nodes."
According to the above description, I have following concerns:
1. if I open a new environment and db, insert/modify/delete several million records, and without reopen the environment, then normal recovery is not run. That means, so far, the BTree is not complete? Will that affact the query efficiency? Or even worse, will that output incorrect results?
2. if my above thinking is correct, then every time I finish commiting transactions, I need to let the checkpoint to run in order to recreate the whole BTree. If my above thinking is not correct, then, that means that, I don't need to care about anything, just call transaction.commit(), or db.sync(), and let je to care about all the details.(I hope this is true :>)
michael.http://www.oracle.com/technology/documentation/berkeley-db/je/TransactionGettingStarted/chkpoint.html
Checkpoints are normally performed by the checkpointer background thread, which is always running. Like all background threads, it is managed using the je.properties file. Currently, the only checkpointer property that you may want to manage is je.checkpointer.bytesInterval. This property identifies how much JE's log files can grow before a checkpoint is run. Its value is specified in bytes. Decreasing this value causes the checkpointer thread to run checkpoints more frequently. This will improve the time that it takes to run recovery, but it also increases the system resources (notably, I/O) required by JE.
""" -
Confused about extending the Sprite class
Howdy --
I'm learning object oriented programming with ActionScript and am confused about the Sprite class and OO in general.
My understanding is that the Sprite class allows you to group a set of objects together so that you can manipulate all of the objects simultaneously.
I've been exploring the Open Flash Chart code and notice that the main class extends the Sprite class:
public class Base extends Sprite {
What does this enable you to do?
Also, on a related note, how do I draw, say, a line once I've extended it?
Without extending Sprite I could write:
var graphContainer:Sprite = new Sprite();
var newLine:Graphics = graphContainer.graphics;
And it would work fine. Once I extend the Sprite class, I'm lost. How do I modify that code so that it still draws a line? I tried:
var newLine:Graphics = this.graphics;
My understanding is that since I'm extending the Sprite class, I should still be able to call its graphics method (or property? I have no idea). But, it yells at me, saying "1046: Type was not found or was not a compile-time constant: Graphics.Thanks -- that helped get rid of the error, I really appreciate it.
Alas, I am still confused about the extended Sprite class.
Here's my code so far. I want to draw an x-axis:
package charts {
import flash.display.Sprite;
import flash.display.Graphics;
public class Chart extends Sprite {
// Attributes
public var chartName:String;
// Constructor
public function Chart(width:Number, height:Number) {
this.width = width;
this.height = height;
// Methods
public function render() {
drawAxis();
public function drawAxis() {
var newLine:Graphics = this.graphics;
newLine.lineStyle(1, 0x000000);
newLine.moveTo(0, 100);
newLine.lineTo(100, 100);
I instantiate Chart by saying var myChart:Chart = new Chart(); then I say myChart.render(); hoping that it will draw the axis, but nothing happens.
I know I need the addChild method somewhere in here but I can't figure out where or what the parameter is, which goes back to my confusion regarding the extended Sprite class.
I'll get this eventually =) -
Confused about standby redo log groups
hi masters,
i am little bit confuse about creating redo log group for standby database,as per document number of standby redo group depends on following equation.
(maximum number of logfiles for each thread + 1) * maximum number of threads
but i dont know where to fing threads? actually i would like to know about thread in deep.
how to find current thread?
thanks and regards
VDis it really possible that we can install standby and primary on same host??
yes its possible and i have done it many times within the same machine.
For yours confusion about spfile ,i agree document recommend you to use spfile which is for DG broker handling if you go with DG borker in future only.
There is no concern spfile using is an integral step for primary and standby database implementation you can go with pfile but good is use spfile.Anyhow you always keep pfile on that basis you created spfile,i said you make an entry within pfile then mount yours standby database with this pfile or you can create spfile from this pfile after adding these parameter within pfile,i said cause you might be adding this parmeter from SQL prompt.
1. logs are not getting transfered(even i configure listener using net manager)
2.logs are not getting archived at standby diectory.
3.'ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION' NEVER COMPLETE ITS RECOVERY
4. when tried to open database it always note it 'always' said system datafile is not from sufficiently old backup.
5.i tried 'alter database recover managed standby database camncel' also.Read yours alert log file and paste the latest log here..
Khurram -
Hi all,
As far as I know, SOAP is initially designed to be an XML based
RPC protocol.
But Java API for XML Messaging (JAXM), which is actually a
messaging API (and not RPC), is also based on SOAP.
How do they fit to each other?
In a few words, what does actually SOAP define?
I am confused about that, can you help me?
Any idea will be appreciated.
Thank youIn a few words -- no. Try here:
http://java.sun.com/webservices/docs/1.0/tutorial/index.html -
Confused about passing by reference and passing by valule
Hi,
I am confuse about passing by reference and passing by value. I though objects are always passed by reference. But I find out that its true for java.sql.PreparedStatement but not for java.lang.String. How come when both are objects?
ThanksHi,
I am confuse about passing by reference and passing
by value. I though objects are always passed by
reference. But I find out that its true for
java.sql.PreparedStatement but not for
java.lang.String. How come when both are objects?
ThanksPass by value implies that the actual parameter is copied and that copy is used as the formal parameter (that is, the method is operating on a copy of what was passed in)
Pass by reference means that the actual parameter is the formal parameter (that is, the method is operating on the thing which is passed in).
In Java, you never, ever deal with objects - only references to objects. And Java always, always makes a copy of the actual parameter and uses that as the formal parameter, so Java is always, always pass by value using the standard definition of the term. However, since manipulating an object's state via any reference that refers to that object produces the same effect, changes to the object's state via the copied reference are visible to the calling code, which is what leads some folk to think of java as passing objects by reference, even though a) java doesn't pass objects at all and b) java doesn't do pass by reference. It passes object references by value.
I've no idea what you're talking about wrt PreparedStatement, but String is immutable, so you can't change its state at all, so maybe that's what's tripping you up?
Good Luck
Lee
PS: I will venture a guess that this is the 3rd reply. Let's see...
Ok, second. Close enough.
Yeah, good on yer mlk, At least I beat Jos.
Message was edited by:
tsith -
PSE 7 confusion about folder location, help needed
Here's some background: I'm using PhotoShop Elements 7 on Win XP. I have an external firewire hard drive I use for overflow/backups. Originally, this showed up as a K: drive on my system.
I added a RAID controller and two more drives to stripe as a single drive for temp space rendering movies. This ended up as a K: drive and the external moved to L: However, when I did this there were some pictures from my catalog that I had on the external drive. I have used File > reconnect missing files to handle the moves, but PSE is still confused (very).
PSE has started to mix up the RAID (K:) and external (L:) content. If I move a set of pictures (e.g. a folder of them) onto the external drive (L:) via drag and drop in the folder location view, the folder will show up empty on the L: heirarchy, but will show up as a gray folder icon in the K: RAID drive hierarchy. If I open up windows explorer, the RAID drive will appear empty. In other cases (I'm not sure when/how yet), pictures physically end up on the RAID drive itself instead of the external. I have uninstalled both the external drive and the RAID drive and reinstalled them both, but they are still getting confused in the folder view by PSE. I've also tried moving content outside of PSE and just reconnecting missing files, but it still wants to put things under the K: RAID drive instead of the external L:.
I've searched everywhere I can think of for a description of what gray folder icons in the folder location view means and can find none. I'm not sure how to convince PSE that there's nothing on the RAID K: drive and it shouldn't try to connect the two. Any suggestions?
Thanks,
JimThank you! I ran psedbtool and the output shows the catalog has the wrong drive letter for the L: drive.
Is there a way to make PSE forget about the K: and L: drives that it is so confused about so that it can relearn of their existence? If I use the drive letter reassignment to fix PSE, it will break other apps that are now dependent on the current drive letter assignments. I've tried removing all files from the L: drive, but it's still remembered as part of the catalog.
Thanks,
Jim
psedbtool version 1.07
Opening catalog C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\Catalogs\Moms pics\catalog.pse7db
Photoshop Elements version: 7
Total files : 4833
Total files missing : 0
Total files offline : 278
Total files wrong volume : 0
****** Volumes with warnings: 1
PSE Volume Table
Path used by PSE : F:
Type : builtin_drive
Status : online
Total files : 0
Total files missing : 0
Total files wrong volume: 0
Description : MEDIA
Serial : 1C2F-9805
Drive_path_if_builtin : F:
Id : 32520
Path used by PSE : M:
Type : builtin_drive
Status : online
Total files : 938
Total files missing : 0
Total files wrong volume: 0
Description : FreeAgent Drive
Serial : 7830-2970
Drive_path_if_builtin : M:
Id : 93626
Path used by PSE : E:
Type : builtin_drive
Status : online
Total files : 0
Total files missing : 0
Total files wrong volume: 0
Description : GAMES
Serial : 025A-4B70
Drive_path_if_builtin : E:
Id : 93625
Path used by PSE : L:
Type : builtin_drive
Status : online
Total files : 114
Total files missing : 0
Total files wrong volume: 0
Description : FreeAgent Drive
Serial : 60AE-A816
Drive_path_if_builtin : K:
Id : 31354
***** WARNING ***** : Wrong drive letter in catalog
Path used by PSE : \\dmzhost\media
Type : network_drive
Status : offline
Total files : 278
Total files missing : 0
Total files wrong volume: 0
Description : //dmzhost/media
Serial : //dmzhost/media
Drive_path_if_builtin :
Id : 26948
Path used by PSE : J:
Type : builtin_drive
Status : online
Total files : 3503
Total files missing : 0
Total files wrong volume: 0
Description : MEDIA2
Serial : BAC0-B5A3
Drive_path_if_builtin : J:
Id : 108
Path used by PSE : C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\Catalogs\Moms pics
Type : database_relative_drive
Status : online
Total files : 0
Total files missing : 0
Total files wrong volume: 0
Description : database relative
Serial : amoc:database_relative_volume
Drive_path_if_builtin :
Id : 2
Windows Drives
Drive Type Serial Path
A: removable_drive 0000-0000
C: builtin_drive 9088-07F9
D: builtin_drive F408-1CB0
E: builtin_drive 025A-4B70
F: builtin_drive 1C2F-9805
G: builtin_drive 242D-15ED
H: readonly_drive 0000-0000
I: builtin_drive 427D-3F6B
J: builtin_drive BAC0-B5A3
K: builtin_drive 64E8-9846
L: builtin_drive 60AE-A816
M: builtin_drive 7830-2970
Thanks so much for your help!
Jim -
Confused about schema..
I'm currently working on a project using VB 2010 Express and Oracle 11g XE. On my Oracle My SQL Developer, I am currently logged on as 'user X' and I created three tables. All of which are just listed on the 'tables' tree. Does it mean that 'user X' is like a schema when compared to MySQL?
I have already integrated my database to my vb project and is working fine ATM. I'm just really confused about schemas in Oracle 11g XE.I'm just really confused about schemas in Oracle 11g XE.http://docs.oracle.com/cd/E11882_01/server.112/e25789/intro.htm#CEGJFFFD
-
I am confused about Icloud. I have a 5 year old Macbook, a 2 year old macbook and a 5 year old mac mini. What exactly do I need to do to get all this connected via Icloud. I also have an Iphone 3G. Help please! Also, I still don't understand exactly what the benefits are. At the moment it seems a lot of hassle to change a system that's been working perfectly well and that I'm very happy with. I'm not at all sure whether the mac mini (1.66 GHz INtel Core Duo) can be brought up to the relevant spec to run ICloud. Any thoughts?
There are two aspects to iCloud. One is simply getting an account, or migrating a mobileme account to iCloud. The second part is using the various features of iCloud to sync contacts, calendars, use music match or photo sharing, and store iWorks documents.
First to get an iCloud account:
If you have a mobileme account, you can migrate by simply logging onto www.icloud.com (ignore any references to Lion and just click through to complete the migration). If you have OS X Lion or an iOS 5 mobile device, you can create an iCloud account on that device using any valid AppleID.
Once you have an account, you can use JUST the mail account if you wishi - it is a standard IMAP account so you would set it up like any other IMAP email account you have, in whatever client program you use to read email.
To use the OTHER feautes of iCloud, your computers will have to be running OS X Lion (10.7). Your iPhone 3G will never be able to use iCloud as it cannot run iOS 5 (you need a min. of an iPhone 3GS to run iOS 5).
The requirements for OS X Lion are here - http://www.apple.com/macosx/specs.html You need a min. of a Core 2 duo processor so you mini is not capable of running Lion.
So, in your case, the single reasons for iCloud would be if you have a mobileme account, then use the online www.icloud.com to migrate your account so you do not lose your @me.com email address. You can use iCloud email (without using any other iCloud features) by setting it up as IMAP mail with these settings - http://support.apple.com/kb/HT4864
If you want an iCloud account and do NOT already have a mobileme account, you will need to upgrade one machine at least to Lion in order to be able to create an iCloud account.
Maybe you are looking for
-
Aperture, MobileMe, AppleTV...Which Forum?
Hopefully this forum will work for me... Anyone else having issues with Aperture images published to MobileMe that don't show up on AppleTV? Or at least gives you trouble on AppleTV? First of all the MobileMe albums don't show up UNLESS I publish an
-
Posting not possible in Purchase Order created for Asset.
Hi All I have created a Purchase Order for Asset. While making down payment for the same through f-48, I am not able to post the same. How I will take care of this? Please guide how to make the posting..... Thanks Ruby
-
which tables contain tax fields like BED,CESS,discounts and the net value after these calculations.. wchich tcode contains these fields??... Thanks, Sri
-
Can a drum pattern created in Ultrabeat be limited to playing only once? Basically creating a single bar.
-
OPTIARC-AD7560A-D803.exe firmware and CRC/installation issues for DvD RW drive
Does anyone happen to know if the "OPTIARC-AD7560A-D803.exe" file is still available? If so, where? The file seems necessary to correct issues with my DVD RW drive, which experiences unfounded CRC errors when I try to install certain software from CD