Confused about re-download rights

I understood that if you downloaded content from iTunes onto an authorized machine, you could delete it off the machine's internal storage and then re-download it (without another payment) at a later time. However, I have tried this, and the "available downloads" selection in iTunes shows no available downloads, even though music and movies I have purchased previously are not currently on the computer. Is there some trick to this feature? Secondly, is the re-download -- assuming it's actually available at all -- only available on the computer that was authorized at the time of the original purchase? I made some purchases on a prior Mac, and some on my current one. It would be nice if any song, tv show, or movie I purchased in the past could be re-downloaded to, and heard/viewed on, my current Mac.

http://support.apple.com/kb/HT2519

Similar Messages

I'm confused about the 'Downloading' of songs to my iPad

I thought I understood iTunes Match but now that I have it up and running I'm confused.
I purchased it because I thought it solved my problem - I have a library of songs equaling almost 70gb, and I just bought an iPad that has 64gb of space. I knew there was no way I was going to put my whole library on my iPad so I got iTunes Match. I thought it took all my songs and put them in a cloud and I would stream my songs from the cloud on my iPad. It was a way of still having ACCESS to my library but not physically having the library on my iPad.
But now that I see all the songs on my iPad, I also see theres Download buttons next to each song, and a Download All button under each album.
It looks like when I listen to a song it's being downloaded to my iPad. Is that correct?
So if this is how iTunes Match works, if I listen to every song one time my iPads 64gb will be filled with just songs (which was what I was trying to avoid in the first place)
Please let me know if I have this right or if I'm missing something.
Thank you

You can delete individual songs by swiping and tapping the "delete" button. Delete entire Albums or Artists by tap-n-hold then tapping the "x." If you want to delete all music go to Settings > General > Usage and tap Music, swipe across it and tap "delete." Deleting an playlist from your iOS device will delete the playlist from iTunes as well.

Confused about message downloading and sychronization

I'm new to TB- in the past I have always used a simple web interface. My server is on an IMAP server (Dreamhost)
I've read the "Configuration Options for Downloading Messages" page, but either don't understand it or it doesn't give enough details.
I want to download all my messages stored on my server to my laptop- not just the headers. I'd like to preserve the existing folder configuration that I have on my server. I don't want TB to ever delete any message unless I specifically tell it do so, preferably with confirmation.
My goal is to download all my currently stored messsages and folders, then once I know they are safe on my harddrive I will selectively delete many of them from the server.
I'm not understanding how to make TB do that. It seems it is only downloading headers and I can't see how to make it download the entire message. Also, I don't quite want what I think it considers sychronization- if I delete a message on the server I don't necessarily want TB to delete that message locally. How else could I archive my messages locally?
in other words, I want all my messages to be stored locally, and only some of them left on the server.
For instance, I place three emails into a folder on my server. I quit that
connection, then invoke Icedove on my laptop. If I click on that folder it
then retrieves and displays those three emails (or just the headers?).
If I then quit Icedove and return to my web based email and remove those
three emails from the server, I expect those three emails to stay on my
local machine. Yet when I invoke Icedove again, it sees that the three emails are
gone from the server and subsequently removes them from display....
So, does this mean that the messages were never actually retrieved
locally? Or is Icedove removing the local copies in order to synchronize
with the server?
Here are the settings I am using:
under "Copies & Folders" -> keep message archives in: "Archives folder
on": Local Folders"
under "Synchronization & Storage" ->"Message Synchronizing" -> keep
messages for this account on this machine. I have all the folders checked
under "Advanced"
under "Disk Space" -> Synchronize all messages regardless of age. And
"Don't delete any messages". It doesn't give me an option to not use
synchronization.
Thanks if you can help,
Keith

Keith, Checking your mail is available for you to read while offline is the easiest way to tell if you have a full offline synchronization of your mail. That is the extent of it in this context.
The 1.2M inbox file will be an MBOX file,
In Thunderbird use the view menu (Alt +V) to ensure that folders is set to all.
In the list to the left you will now (if not before) see "Local Folders" with it's inbox send etc. This is not part of your IMAP account and mail located there is not affected by IMAP synchronization. As a matter of fact moving mail there deletes it from the IMAP server, copying does not.
Having seen the size of your mail (I assume 1.2M is indicative) there is no need for the import export tools (sorry) just select all all the contents of a folder (Ctrl + A) and right click and select copy to and choose a location under Local folders (You can create your own folders there beforehand.)
Now my change of heart re Import/Export. Copying and moving masses of mails in an IMAP situation can cause the synchronization to basically loose the plot. But a couple of Thousand mails should not be sufficient to cause an issue. The import export tools is a work around where the mail leaves Thunderbird and returns to the new location without synchronization.

Attachments-Confused about mail downloads location

It seems that my attachments are located at:
steve/library/mail/[email protected]@mail.xxx.com/INBOX.imapmbox/Attachments/<m anyindividualfolders>
They only move to steve/library/mail downloads
if I press the Quick Look button.
If I press the Save button they go to my designated downloads folder, but it takes quite a while to copy.
Is this normal?
I have mail set to keep all msgs and their attachments for offline viewing.
Steve

StevenFrank wrote:
It seems that my attachments are located at:
steve/library/mail/[email protected]@mail.xxx.com/INBOX.imapmbox/Attachments/<manyindividualfolders>
They only move to steve/library/mail downloads
if I press the Quick Look button.
that's quite normal.
If I press the Save button they go to my designated downloads folder, but it takes quite a while to copy.
Is this normal?
That depends on how you set up your imap account preferences. In account preferences->advanced there is a scroll button "keep copies of messages for offline viewing". If you set it to "All messages and their attachments" then there will be no significant delay when you press the Save button.
Also in general preferences you can set the option "Remove unedited downloads" to "when Mail quits". This will clear the folder
homedirectory/library/mail downloads of all unedited downloads every time you quit Mail. This has no effect on the copies you downloaded using Save button.
I have mail set to keep all msgs and their attachments for offline viewing.
Steve

I'm confused about 'downloading' options via iTunes

When updating via iTunes, you get two options: (1) Download & Install NOW or (2) Download only [to install later]. I chose the 2nd option, as I wasn't quite ready to update my iPod touch to iOS 5. The download went surprisingly quick... took only 5 minutes. I thought it was strange, considering that people were Tweeting left and right that it was going to take 5-7 hours for their downloads to complete. When I finally went to update my iPod several hours later, instead of the update being there and ready to install... iTunes connected to the Apple Servers and started downloading the entire iOS 5 from the BEGINNING! Now, I'm also getting the estimated 7 hours to complete mantra. What gives? What the h*** is the purpose of giving me an option to download and install at a later time, if that's now what actually takes place? What am I confused about? Can anyone provide some insight? I'm highly upset right now.

"I just upgraded a song but i checked back a few hours later to see that the song i just upgraded was available for an upgrade that i already purchased.
What sense does that make? "
Er, none at all actually.
Wanna re-post the question?

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this.

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this. Thank you.

The DVD recorder I'm referring to is one I've use for years. It is not attached to my aging iMac in any way. I simply play the video from my camcorder (mini-dv tape based Canon HV20) into the DVD recorder and create a DVD that can be played in any DVD player. I can only do minimum editing so what goes in is what I get. This has been fine for creating dupes of the various things I shoot.
If I buy a new iMac (21 inch), I'd like to be able to download the video to the iMac through iMovie, work with it to whatever degree I wish, and burn it to a DVD that can also be played in any DVD player -- or to use as a master to dupe copies.
What I'm understanding from you and others is that this would be possible if Apple had included iDVD in the software that comes with the iMac, or if I purchase the iLife Family Pack, or buy the correct version of Toast. I'm hoping I can persuade Apple to sell me an iMac with iDVD installed.
Essentially I want to move from a basic process of creating DVD copies to the more sophisticated process of creating one from an iMac.
Thank you again for your help and wisdom.

HT203167 I am trying to download songs onto my PC it gets to about 85% download then my computer crashes. When I look in my account I have been charged for the items but it has not downloaded and there are no available downloads??

I am trying to download songs onto my PC it gets to about 85% downloaded and then freezes I have to turn off and restart but then I have been charged for the item but it is not available in my downloads can anyone help?

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.

Hi i have had to re install i unes how do i go about re downloading the music i have purchased, as i went to purchases and all it came up with is apps? thanks

hi i have had to re install itunes how do i go about re downloading the music i have purchased, as i went to purchases and all it came up with is apps? thanks

Expanding on what The Fiend said, the license to play music from a CD is tied to and stays with the CD. So if you sell or give away the CDs, the license to play the music goes with them, at which point you legally no longer have the right to the tracks. You need to keep the CDs if you want to keep the music.
As for transferring the tracks from your iPhone back to your computer so you don't have to re-import all your CDs, check out this post from Zevoneer for some iPod/iPhone media recovery options:
http://discussions.apple.com/thread.jspa?messageID=10570955#10570955
Regards.

Swamped and confused about products

Hi guys,
I am new to Oracle middleware products. After looking at a few articles, I am swamped and confused about those products, WebCenter (WC), Content Server (CS), Universal Content Management (UCM).
1. WC has a built-in content database, part of Oracle database. CS also stores contents into Oracle database. Then what are differences between two types of content storage? Can I build WebCenter with Content Server as the content storage?
2. WebCenter provides management functions on content. So does UCM. Users could contribute, review and release contents to web via both. Then what are differences between two types of content management? What more does UMC provide than the built-in content management in WC.
3. Content Server needs a third-party web server (port:80) to publish its content. WebCenter Suite seems use Oracle HTTP Server (port:7777) to render web pages. Is it possible to integrate those two on one web server? Why is Oracle HTTP Server using a weird port?
4. JDeveloper has the built-in OC4J container. But how can JDeveloper access or interact with Content Server or WC content database? Site Studio can access Content Server directly but only provides very limited portlet or ajax components. If I want to store web pages, static or dynamic, into WC and/or CS, which tool should I use?
Can anybody help me with them? Or please point me to the right direction. I really appreciate it.
thanks,
Chen

Plug it in and use the Transfer Purchases function, either from the resulting dialog box or from the File menu. If you need to authorize the computer, choose it from the Store menu.
(65603)

Confused about accounts

We are trying to set up security using account but i'm a bit confused about it.
We have for example a structure like this:
* Company
***** Section 1
********* subsection A
********* subsection B
***** Section 2
********** subsection A
********** subsection B
1) When i define a path like company/Section1/subsection A
does the user also have right to company, Section 1 or does he only has right to subsection A of section 1?
1.B) If user has right to company, section 1, how can i give a user only rights to section1/subsection A?
1.C) if user doesn't have right to company, section 1, how do i give a user right to all folders above?
2) can i define "subsection A" so user has right to section1/subsection A and section2/subsection or does a path always have to start from the root?

Account permission are inclusive.... so if you give some user read permission on Company account then he will get read permissionon Section 1 ,subsection A ,subsection B, Section 2 , subsection A ,subsection B.
If you want to give a user read to one of the subsection then dont give him read permission on any of the parent of the subsection.e.g. you will need to give him access rights on "Company/Section1/subsectionA"
1
A)only has right to subsection A of section 1
B) only rights to section1/subsection A, remove his other rights and give him rights to
"Company/Section1/subsectionA".
1.C) if user doesn't have right to company, section 1, how do i give a user right to all folders above?
can you please elabrate on this question.....
2) can i define "subsection A" so user has right to section1/subsection A and section2/subsection or does a path always have to start from the root?
I think it will have to start from the root.
regards,
sapan

[SOLVED] Confused about Mobility Radeon HD 3200

I've always found hard to find good information about this card - some sources, even, contradict themselves. All what I know is that it is an integrated graphics card and that it features the RS780M chipset. These are some tips I've got from the system logs:
grep -i r600 /var/log/Xorg.0.log
[ 23.353] (II) RADEON(0): [DRI2] DRI driver: r600
[ 23.353] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 24.099] (II) AIGLX: Loaded and initialized r600
dmesg | grep -i radeon
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-hf root=UUID=ab92c2db-22b5-4fcb-a33f-2efe3f3f104c ro radeon.modeset=1 radeon.benchmark=0 radeon.tv=0 radeon.pm=0 init=/usr/lib/systemd/systemd quiet
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-hf root=UUID=ab92c2db-22b5-4fcb-a33f-2efe3f3f104c ro radeon.modeset=1 radeon.benchmark=0 radeon.tv=0 radeon.pm=0 init=/usr/lib/systemd/systemd quiet
[ 1.463857] [drm] radeon kernel modesetting enabled.
[ 1.464337] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 1.464340] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 1.464779] [drm] radeon: 256M of VRAM memory ready
[ 1.464781] [drm] radeon: 512M of GTT memory ready.
[ 1.472494] radeon 0000:01:05.0: WB enabled
[ 1.472499] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800374a5c00
[ 1.472502] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff8800374a5c0c
[ 1.472570] [drm] radeon: irq initialized.
[ 1.472672] radeon 0000:01:05.0: setting latency timer to 64
[ 1.504277] [drm] radeon atom DIG backlight initialized
[ 1.504279] [drm] Radeon Display Connectors
[ 1.504311] [drm] radeon: power management initialized
[ 2.344989] fbcon: radeondrmfb (fb0) is primary device
[ 2.441483] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 2.441486] radeon 0000:01:05.0: registered panic notifier
[ 2.441502] [drm] Initialized radeon 2.30.0 20080528 for 0000:01:05.0 on minor 0
I also found good (?) information, or at least a clearly-explained article, here. After reading it, UVD appears as the AMD's counterpart of NVIDIA's VDPAU for video acceleration.
What I'm not sure about, is:
- Does it support video acceleration? I'd like to offload video processing to the GPU, but am not sure if my card and the open-source drivers support it or not. Wikipedia's article about VDPAU states it comes from NVIDIA, but then it says it has an open-source implementation.
- What has gallium to do with it? What gallium drivers should I enable in mesa? And what about DRI drivers?
I configured mesa as follows:
./configure --prefix=/usr \
--sysconfdir=/etc \
--with-dri-driverdir=/usr/lib/xorg/modules/dri \
--with-gallium-drivers=r600 \
--with-dri-drivers=radeon \
--with-llvm-shared-libs \
--enable-gallium-llvm \
--enable-egl \
--enable-gallium-egl \
--with-egl-platforms=x11,drm \
--enable-shared-glapi \
--enable-gbm \
--enable-glx-tls \
--enable-dri \
--enable-glx \
--enable-osmesa \
--enable-texture-float \
--enable-xa \
--enable-vdpau
Not sure if I missed something, though.
I am very confused about how Linux manages graphics, and what all those layers are for. DRM, DRI, VDPAU, VA-API, gl, gl3, xv, xvmc... it's a mess!
Thanks in advance.
Last edited by Kalrish (2013-06-16 17:54:04)

The feature matrix might help. The easy part to answer is that the 3D driver is split into two parts: DRM which is part of the kernel and DRI which is in userspace and comes from the mesa package.
Xv is an Xserver extension supported by pretty much all drivers. Found in the DDX (xf86-video-*), it uses features of the card to speed up the display of video (but not decoding). It can either do this by using the "video overlay" or creating a shader.
Now if you want to use Xv but also offload decoding to the card, you need a video acceleration API. The ones to choose from are XvMC, VA-API, VDAPU in increasing order of feature support. They were developed by Xorg, Intel, Nvidia respectively but anyone is free to implement them. I don't think it's correct to call UVD a counterpart of VDPAU. UVD is a bunch of registers on newer AMD cards. And if you sent bits to those registers in the right way, you can implement VDPAU.
The other way to implement VDPAU (say if the documentation for UVD registers was not released) is to use gallium. There is a gallium state tracker which can still do it at the expense of being slower. It is a hack whereby you convert video frames to polygon textures and make the OpenGL part of the card think that it's calculating part of a 3D scene when really it's decoding video.

Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

Support for the Nikon D750 was introduced in the latest version of LR 5.7 and ACR 8.7 on Novemder 18th 2014.
Further updates to LR 4 were stopped when LR 5 was released on June 9th 2013. No further updates for bug fixes and new camera support.
Nada, LR 4 will never support Nikon D750. The Nikon D750 was introduced into the market in September 2014 some 15 months after further development of LR 4 was discontinued.
You can use the Adobe DNG program (free download for the package) to convert the Nef (raw) files from your Nikon D750 to the Adobe DNG format which will permit you to import those into LR 4. This is the crutch provided by Adobe to allow for the processing of raw files with outdated versions of LR and ACR.
You can also update the ACR plugin for PS CS6 to version 8.7 which can also work with the raw files from the D750. For direct support in Lightroom you will need to upgrade (paid) to version 5.7.

New bie confused about linking different things BP and org struc

Dear Experts,
It might sound very silly question but as a fresher to a functional module i am bit confused about all the different concepts.
1. How actually we start a CRM implementation like after blue printing what are the activities we first start
like do we first config master data and then org structure and then activities.
what is the inter linking between these three , i have read CR100, after reading that i am not able to link each one of them like which one is first.
And last but not least please kindly guide me how to practise the config.
thanks and regards
Neel

Hi Neel,
first go through with CRM Replication (B09) from building blocks
http://help.sap.com/bp_crmv340/CRM_DE/BBLibrary/html/BBLibrary.htm
and also
http://help.sap.com/bp_crmv250/CRM_DE/index.htm
technical information - building blocks library
abt transactions wat ever the std transactions in R3 will present in CRM which already mapped if there r any Ztransactions u have to create the same Ztransactions in CRM for Ztransactions u need to create Zitem categories item category determination and copy controls everything manually and u have to map them, it is not possible to download these from R3 to CRM
About Business Partners
Watever u r willing to replicate the BPs from CRM to R3 (u can also avoid some BPs not the replicate to R3) u have to do proper settings in R3 in PIDE transaction, u can do here both dimentional replication settings.
go through the building block u can understand
Regards
Manohar
Edited by: Manohar R on May 12, 2008 11:51 AM
Edited by: Manohar R on May 12, 2008 11:52 AM

Confused about conflicting disk guidelines

This is my first time on the forum and I am learning a tremendous amount - thanks everyone. I am planning a machine with 3 disks and I'm a little confused about apparently conflicting guidellines issued by Harm. In the "Storage rules for an editing rig", he states in Rule 4 that "If you have OS & programs on disk C:, set your pagefile on another disk". However, in the "Guidelines for disk disk storage", he says that, for 3 disks, that the OS, programs and pagefile should be on drive C: Which is right? Thanks

You may be somewhat confused, as it appears to be contradictory, but let me try to explain.
The basic rule for a fast disk system is to spread the load across as many disks as you have.
Every disk can access only one location at a time, and if a program requires access to a number of files, it would be great to have all those files on different disks, because then all these files can be accessed in parallel, making it much faster than in a serial way. There are however practical limitations to doing it that way. It does not make sense to organize the location of your clips in such a way that all these clips are on different disks, your potential gains would be far outweighed by the effort to move your clips to different disks. It does not even make sense to allocate a different disk for different tracks, although from a disk performance view it may make a lot of sense.
It has to make sense from a workflow view as well, so you have to compromise and try to follow a 'KISS' approach. As you can see from the Generic Guideline, the allocation of the pagefile can change, depending on the number of disks in the system. The reasoning behind it is to spread the load as much as possible but keep it as simple as possible from an organizational point of view.
Remember, it is only a guideline, not a strict rule. Consider for instance a situation where a lot of stock footage is used in nearly all projects. It makes sense to put all this stock footage on a different disk than your normal clips, if you also add a lot of music to your projects, it makes sense to use a separate disk for your music files, because you spread access load across different disks and still keep it relatively simple to organize. Now, if this does not happen often and only for very limited parts of the timeline, this may not be worth the effort or the dedicated disks. So, the guideline is exactly that and can be influenced by your specific workflow and material. Someone may want to have all his HDV captures on one disk and all his AVCHD imports on another disk and maybe from a third camera on a third disk, thereby improving multicam performance.
Hope this clears it up a bit.

Confused about usage of usage types (NW2004s vs. NW 7.1 vs. NW mobile 7.1)

Hello all
I'm confused about the different combination possibilities / restrictions when it comes to compare NW2004s, NW PI 7.1 PI and NW Mobile 7.1. I already consulted the Master Guides and technical installation guides but am still confused. So if someone could shed some more light on it it would be great!
We plan to implement our interfaces, whether internal (system to system) or external (customers, suppliers) using XI (now called PI, right?). But we also intend to develop and run mobile apps (occasionally conected ones). So my questions around it are:
1) Do we need to install at least two separate servers for this? I mean:
- 1 server for SAP Netweaver PI 7.1
- 1 server for SAP Netweaver Mobile 7.1
2) Or is possible to have all this on one single server using SAP Netweaver 2004s with usage types AS ABAP, PI and Mobile.
3) Is usage type AS JAVA required when choosing usage type Mobile?
4) What would you recommend for production environments (note: I'm aware of the sizing / scaling question but I'm only interested in some kind of best practices advices in terms of maintenance, patching, etc.).
Thanks anyone for some input on it
BR
Renaud

Thanks Russell and Larissa for your clarifications.
Re-checked the master guide for NW 2004s (7.0) and now found the relevant text in chapter 3.3.1 on pages 30 + 31. Must have overlooked it the 1st time.
Other questions:
a) What is the difference between a installation of NW 7.0 with usage type AS ABAP and PI compared to NW PI 7.1 ?!?
b) What is the difference between an installation of NW 7.0 with usage type AS ABAP and Mobile compared to NW Mobile 7.1 ?!?
Do the 7.1 versions contain real newer releases or is it just another packaging of same components? What are the advanteges of the 7.1 versions?
Thanks again in advance for some more clarification!
Renaud

Confused about re-download rights

Similar Messages

Maybe you are looking for