Confused About Router Whereabouts

Alright here's the basic gist: I'm totally lost. I just bought a Wireless -G Broadband Router with SpeedBooster and a Wireless -G PCI Adapter with Speedbooster, okay? So I go an hook up my Compaq computer and discover I dunno what to even do. Alright, to start off the Adapter doesn't seem to have anywhere to be slotted in but forget that fact -right now that's not important. What I'm concerned with is this router of yours. The modem is my problem. You see, I have my modem hooked up to my Dell computer, and the Compaq is the only other one I'm setting up. So what am I to do? Connect the router to the Dell because its the one with the modem? My family is telling me that the router AND adapter both need connected into my Compaq -the one lacking modem so there for no internet. Meanwhile, I'm convinced I'm to put the router on the modem of the Dell and have the adapter in the Compaq. Yet no one agrees with me and they all think I dunno what I'm talking about. Yet how can I connect my router to my Compaq if it doesn't own a modem? I'm not suppose to go out and buy another modem? No....then what would be the point of your products? Ah, I'm asking stupid questions. So yeah, I guess what I'm asking is : I know my adapter goes on the Compaq, so is the router to go on the Dell? And if not, how am I to set it up on the Compaq when the Compaq lacks a modem? Please, any help would be greatly appericated. 

I assume you want to have a wired connection for your Dell and a wireless connection for your Compaq.  I also assume that the "modem" you are talking about is a high speed cable or DSL or ADSL modem, and not a 56K modem.  I also assume that the Compaq is a desktop or tower computer, and not a laptop.  (Note: if the Compaq is a laptop, the wireless G PCI will not fit.)
First, follow the instructions that came with your router, and use the setup disk that came with the router.  It will give you step by step instructions, telling you when to connect your computer to the router and when to connect the router to the modem.
Ultimately you will have connections like this:
modem ---- router ----- Dell computer.
After you get your wired internet connection up and running, then try to set up your Compaq computer.
The wireless PCI card must be installed inside the Compaq computer (the antena part will stick out the back of the computer).  Follow the directions that came with the wireless PCI card.  The wireless card will send out a radio signal and connect wirelessly (via the radio signal) to the router.  The router will allow you to share the internet connection with both of your computers.
You do not need a second modem.  The router needs only one modem.  Both computers connect to the router, and through the same modem.
If you prefer to use a wired connection to your Compaq computer, you can wire the router to the 10/100 port on the Compaq.  In this case, you would not need the wireless G PCI adapter.
Message Edited by toomanydonuts on 12-28-200603:37 AM
Message Edited by toomanydonuts on 12-28-200603:42 AM
Message Edited by toomanydonuts on 12-28-200603:50 AM

Similar Messages

  • A little confusion about router

    I understand that I can use my Airport Extreme Base Station as my secondary router.  Am I correct that I leave all my Cat5 cables plugged into the Airport Extreme and run a Cat 5 from the FIOS router to the WAN of the Airport, and turn off the radio of the FIOS router?  By doing this do I loose and functions? Keep in mind I have TV, Internet and Phone.

    There is a great deal of information  on DSL Reports about the configuration of the Airport Extreme as a secondary router in FiOS installations.  In fact there are many step-by-step recipes for a  wide variety of installation options, and tables that show which FiOS functions (e.g.., Caller ID, Media Manager) operate successfully under  the various configurations.  I am far from expert in such things but the DSL information made installing and configuring my secondary router quite easy.

  • I'm new and confused about "connection" things

    I'm new to BlackBerry--I have an 8320 Curve, I'm a small business owner and I'm not connected to a BES. I use the BB Desktop Manager to synchronize with Outlook and to back up my BB and I've done pretty well on most things, but I still have a few things I'm confused about. In this forum, I'll ask my "confusion questions" concerning data options.
    I have a "pay as you go" data plan with AT&T, my provider, because there is virtually no cell reception at my home where I also work. (I'm not using my BB for email since I'm in front of my computer most of the time). I have a home network set up and I've incorporated a router that supports wireless. I've connected a netbook to the wireless network and used it to surf the Internet, so, I know my wireless connection works. I've also managed to create a wireless connection on my BB to this network and on the Home screen, it will display my wireless network's name when I'm here at home, so, I know the device is connected to my network.
    BUT, I don't think I'm actually using my home wireless network...I tried the other day by browsing the Internet and then AT&T told me I incurred data charges--which I thought I shouldn't have if I wasn't using their network. Either I'm wrong about assuming they won't charge me if I use my network or I have something set up incorrectly on my BB...can anyone provide some guidance?
    Next, I don't truly understand what BIS is...I searched through the KB and couldn't find anything that actually defines BIS...could somebody please explain what BIS is?
    Finally, can somebody please explain the difference between "mobile network" and "wi-fi"? It seems, if I turn off "mobile network" I have no connection at all, including wi-fi. Is that the way things should be? But, I can turn off wi-fi and still get a connection (if I go outside as far from my house as possible and face south <g>).
    Thanks...and now I'm off to the BB Desktop Manager forum to ask a few questions there!
    Solved!
    Go to Solution.

    Hi and Welcome to the forums!
    I can help you with one or two of your questions:
    ejm1 wrote:
    Next, I don't truly understand what BIS is...I searched through the KB and couldn't find anything that actually defines BIS...could somebody please explain what BIS is?
    BIS is Blackberry Internet Service...a service, hosted by your carrier, that provides a conduit between internet facing email systems (e.g., Yahoo, GMail, etc.) and your BB. Inside of BIS, you create conduits for each of your email providers that you desire to receive OTA email for on your BB. BIS will check your provider on a periodic basis (documented to be every 15 minutes) and only when there is something that needs to come to your BB does it generate any traffic over the carrier network with your BB. BIS is an add-service, only available to those who, from their carrier, contract for The Blackberry Data Plan (as it is usually called) -- a generic data plan is not usually adequate to have access to BIS.
    ejm1 wrote:
    Finally, can somebody please explain the difference between "mobile network" and "wi-fi"? It seems, if I turn off "mobile network" I have no connection at all, including wi-fi. Is that the way things should be? But, I can turn off wi-fi and still get a connection (if I go outside as far from my house as possible and face south <g>).
    Mobile Network is your carriers network...data and/or voice services provided OTA for your BB. WiFi is wireless networking (802.11a/b/g/n) through your home WAP, hotspots, etc. I don't know if turning off Mobile Networ should or should not affect your ability to continue to use WiFi...I would think they are separate, but I don't have a BB model with WiFi.
    I know nothing about the pay-as-you-go programs, but from all you describe, it seems that you may well be using your carrier network at times. You will need to find out (and there are others here who know) how to shut off your carrier network yet leave WiFi running so that you don't incurr the costs of surfing via the carrier network.
    Hope that helps a little!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Confused about mpls mtu command

    hi,
    i confuse about mpls mtu command
    test platforms are 76 pfc3b,mpls,gigabit sip400 spa interface
    if i didn't config mpls mtu command ,using default,ping command is successful,if more than 1496 packets, i can see fragment from show ip traffic.
    if i config mpls mtu override 1504,ping command is sucessful too. there is fragment too when i use 1501 byte packet.
    if i config mpls mtu override 1524 byte.
    ping command failed if i use packet more than 1500, , all packet are droped,even 1501 byte.only 1500 byte packet can success.
    all config above interface mtu is 1500.
    this confused me.
    why i use default 1500 interace mtu, mpls mtu override 1504 ,ping packet can fragment,ping success, but i use mpls mtu override 1524, i can see fragment in show ip traffic,but ping command failed. i can't see packet in destination router,how this work.
    thank you!
    jun

    topology is simple
    7609-1--sip GE spa----7609-2--pos---7609-3--flexwan E1-----7604-1--ge--ce
    i config mpls mtu 1524 between 7609-1 and 7609-2 . and keep interface mtu 1500 default.
    ping packet from 7609-1 to 7604-1 loopback 0.
    ping 1500 byte packet is ok, but ping 1501 byte packet is totally lost.then i config mtu 1524 between 7604-1 and 7609-3, it is useless,notwork, i can't see packet coming from 7609-1 on 7604-1.
    but i add config mtu 1524 between 7609-1 and 7609-2. config mtu 1500 between 7604-1 and 7609-3,ping 1501 bytes from 7609-1 to 7604-1 loopback0 is ok. but i can see fragment from show ip traffic command in 7609-3.
    i have a question, why we need mpls mtu command. if we don't change interface mtu,just only config mpls mtu 1524, it doesn't work, if we just change mpls mtu,how it work in the ios. if we config interface mtu 1524,interface mtu size is big enough, it seems mpls mtu command is useless, we don't need mpls mtu command, just interface mtu 1524 is ok.
    why we need mpls mtu command. we just only change interface mtu is enough.
    thank you!
    jun

  • I am confused about something.  How do I read a book on my MacBook Pro?  I can't find the iBook app anywhere, which is what I use on my iPad.  The book I want to read is in my iTunes but I can't click on it.  My iBook library does not show up in iTunes.

    I am confused about something.  How do I read a book on my MacBook Pro?  I can't find the iBook app anywhere, which is what I use on my iPad.  The book I want to read is in my iTunes but I can't click on it.  Some of my iBooks show up in my iTunes but they are "grayed" out.  The only books that respond in iTunes are audiobooks and that's not what I'm looking for.  Is this a stupid question?

    Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro.  If I want to read on my mac I have to use Kindle or Nook.  Which means any book I've already purchased through iBooks has to be read on my iPad.  Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

  • Confuse about the injecting entity in EJB 3.0?

    Hi all,
    I have an customersBean which is inherit from customersRemote and my problem is i' am little confuse about injecting the entity(customer).
    Where can you apply the EntityManagerFactory is it outside on EJB or Inside the EJB? means outside EJB is use the web application or java application. i have and example.
    this is inside on EJB...............
    public class CustomersBean implements com.savingsaccount.session.CustomersRemote {
    @PersistenceContext(unitName="SavingAccounts")
    EntityManagerFactory emf;
    EntityManager em;
    /** Creates a new instance of CustomersBean */
    public CustomersBean() {
    public void create(int id, String name, String address, String telno, String mobileno)
    try{
    //This is the entity.
    Customer _customer = new Customer();
    _customer.setId(id);
    _customer.setName(name.toString());
    _customer.setAddress(address.toString());
    _customer.setTelno(telno.toString());
    _customer.setMobileno(mobileno.toString());
    em = emf.createEntityManager();
    em.persist(_customer);
    emf.close();
    }catch(Exception ex){
    throw new EJBException(ex.toString());
    in web application, i'm using the @EJB in customer servlets.
    public class CustomerProcessServlet extends HttpServlet {
    @EJB
    private CustomersRemote customerBean;
    blah blah inject directly coming request field from jsp.
    }

    Hi all,
    I have an customersBean which is inherit from customersRemote and my problem is i' am little confuse about injecting the entity(customer).
    Where can you apply the EntityManagerFactory is it outside on EJB or Inside the EJB? means outside EJB is use the web application or java application. i have and example.
    this is inside on EJB...............
    public class CustomersBean implements com.savingsaccount.session.CustomersRemote {
    @PersistenceContext(unitName="SavingAccounts")
    EntityManagerFactory emf;
    EntityManager em;
    /** Creates a new instance of CustomersBean */
    public CustomersBean() {
    public void create(int id, String name, String address, String telno, String mobileno)
    try{
    //This is the entity.
    Customer _customer = new Customer();
    _customer.setId(id);
    _customer.setName(name.toString());
    _customer.setAddress(address.toString());
    _customer.setTelno(telno.toString());
    _customer.setMobileno(mobileno.toString());
    em = emf.createEntityManager();
    em.persist(_customer);
    emf.close();
    }catch(Exception ex){
    throw new EJBException(ex.toString());
    in web application, i'm using the @EJB in customer servlets.
    public class CustomerProcessServlet extends HttpServlet {
    @EJB
    private CustomersRemote customerBean;
    blah blah inject directly coming request field from jsp.
    }

  • Confused about logical table source

    Hi,
    I'm confused about logical table source(LTS), there are 'General', 'Column Mapping', 'Content' tabs in
    LTS, in General tab ,there are some information,like 'Map to there tables' and 'joins',
    just here, we have created relationships in physical layer and BMM layer, so I would like to ask what's the use of the 'joins' here?

    Hi Alpha,
    Valid query, when you establish a complex join it is always between a logical fact and dimension table.Consider a scenario,
    Example:w_person_dx is an extension table not directly joined to a fact but joins to a dimension w_person_d.
    When you model the person_d tables in BMM, you ll have a single logical table with w_person_d as source.If you have to pull columns from both w_person_d and w_person_dx tables in a report, you add dx table as inner join to persond table in the general tab.Now when you check your physical query, you can see the inner join fired between the two dimensions.
    Rgds,
    Dpka

  • Confused about transaction, checkpoint, normal recovery.

    After reading the documentation pdf, I start getting confused about it's description.
    Rephrased from the paragraph on the transaction pdf:
    "When database records are created, modified, or deleted, the modifications are represented in the BTree's leaf nodes. Beyond leaf node changes, database record modifications can also cause changes to other BTree nodes and structures"
    "if your writes are transaction-protected, then every time a transaction is committed the leaf nodes(and only leaf nodes) modified by that transaction are written to JE logfiles on disk."
    "Normal recovery, then is the process of recreating the entire BTree from the information available in the leaf nodes."
    According to the above description, I have following concerns:
    1. if I open a new environment and db, insert/modify/delete several million records, and without reopen the environment, then normal recovery is not run. That means, so far, the BTree is not complete? Will that affact the query efficiency? Or even worse, will that output incorrect results?
    2. if my above thinking is correct, then every time I finish commiting transactions, I need to let the checkpoint to run in order to recreate the whole BTree. If my above thinking is not correct, then, that means that, I don't need to care about anything, just call transaction.commit(), or db.sync(), and let je to care about all the details.(I hope this is true :>)
    michael.

    http://www.oracle.com/technology/documentation/berkeley-db/je/TransactionGettingStarted/chkpoint.html
    Checkpoints are normally performed by the checkpointer background thread, which is always running. Like all background threads, it is managed using the je.properties file. Currently, the only checkpointer property that you may want to manage is je.checkpointer.bytesInterval. This property identifies how much JE's log files can grow before a checkpoint is run. Its value is specified in bytes. Decreasing this value causes the checkpointer thread to run checkpoints more frequently. This will improve the time that it takes to run recovery, but it also increases the system resources (notably, I/O) required by JE.
    """

  • Confused about extending the Sprite class

    Howdy --
    I'm learning object oriented programming with ActionScript and am confused about the Sprite class and OO in general.
    My understanding is that the Sprite class allows you to group a set of objects together so that you can manipulate all of the objects simultaneously.
    I've been exploring the Open Flash Chart code and notice that the main class extends the Sprite class:
    public class Base extends Sprite {
    What does this enable you to do?
    Also, on a related note, how do I draw, say, a line once I've extended it?
    Without extending Sprite I could write:
    var graphContainer:Sprite = new Sprite();
    var newLine:Graphics = graphContainer.graphics;
    And it would work fine. Once I extend the Sprite class, I'm lost. How do I modify that code so that it still draws a line? I tried:
    var newLine:Graphics = this.graphics;
    My understanding is that since I'm extending the Sprite class, I should still be able to call its graphics method (or property? I have no idea). But, it yells at me, saying "1046: Type was not found or was not a compile-time constant: Graphics.

    Thanks -- that helped get rid of the error, I really appreciate it.
    Alas, I am still confused about the extended Sprite class.
    Here's my code so far. I want to draw an x-axis:
    package charts {
        import flash.display.Sprite;
        import flash.display.Graphics;
        public class Chart extends Sprite {
            // Attributes
            public var chartName:String;
            // Constructor
            public function Chart(width:Number, height:Number) {
                this.width = width;
                this.height = height;
            // Methods
            public function render() {
                drawAxis();
            public function drawAxis() {
                var newLine:Graphics = this.graphics;
                newLine.lineStyle(1, 0x000000);
                newLine.moveTo(0, 100);
                newLine.lineTo(100, 100);
    I instantiate Chart by saying var myChart:Chart = new Chart(); then I say myChart.render(); hoping that it will draw the axis, but nothing happens.
    I know I need the addChild method somewhere in here but I can't figure out where or what the parameter is, which goes back to my confusion regarding the extended Sprite class.
    I'll get this eventually =)

  • Confused about standby redo log groups

    hi masters,
    i am little bit confuse about creating redo log group for standby database,as per document number of standby redo group depends on following equation.
    (maximum number of logfiles for each thread + 1) * maximum number of threads
    but i dont know where to fing threads? actually i would like to know about thread in deep.
    how to find current thread?
    thanks and regards
    VD

    is it really possible that we can install standby and primary on same host??
    yes its possible and i have done it many times within the same machine.
    For yours confusion about spfile ,i agree document recommend you to use spfile which is for DG broker handling if you go with DG borker in future only.
    There is no concern spfile using is an integral step for primary and standby database implementation you can go with pfile but good is use spfile.Anyhow you always keep pfile on that basis you created spfile,i said you make an entry within pfile then mount yours standby database with this pfile or you can create spfile from this pfile after adding these parameter within pfile,i said cause you might be adding this parmeter from SQL prompt.
    1. logs are not getting transfered(even i configure listener using net manager)
    2.logs are not getting archived at standby diectory.
    3.'ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION' NEVER COMPLETE ITS RECOVERY
    4. when tried to open database it always note it 'always' said system datafile is not from sufficiently old backup.
    5.i tried 'alter database recover managed standby database camncel' also.Read yours alert log file and paste the latest log here..
    Khurram

  • Confused about SOAP

    Hi all,
    As far as I know, SOAP is initially designed to be an XML based
    RPC protocol.
    But Java API for XML Messaging (JAXM), which is actually a
    messaging API (and not RPC), is also based on SOAP.
    How do they fit to each other?
    In a few words, what does actually SOAP define?
    I am confused about that, can you help me?
    Any idea will be appreciated.
    Thank you

    In a few words -- no. Try here:
    http://java.sun.com/webservices/docs/1.0/tutorial/index.html

  • Confused about passing by reference and passing by valule

    Hi,
    I am confuse about passing by reference and passing by value. I though objects are always passed by reference. But I find out that its true for java.sql.PreparedStatement but not for java.lang.String. How come when both are objects?
    Thanks

    Hi,
    I am confuse about passing by reference and passing
    by value. I though objects are always passed by
    reference. But I find out that its true for
    java.sql.PreparedStatement but not for
    java.lang.String. How come when both are objects?
    ThanksPass by value implies that the actual parameter is copied and that copy is used as the formal parameter (that is, the method is operating on a copy of what was passed in)
    Pass by reference means that the actual parameter is the formal parameter (that is, the method is operating on the thing which is passed in).
    In Java, you never, ever deal with objects - only references to objects. And Java always, always makes a copy of the actual parameter and uses that as the formal parameter, so Java is always, always pass by value using the standard definition of the term. However, since manipulating an object's state via any reference that refers to that object produces the same effect, changes to the object's state via the copied reference are visible to the calling code, which is what leads some folk to think of java as passing objects by reference, even though a) java doesn't pass objects at all and b) java doesn't do pass by reference. It passes object references by value.
    I've no idea what you're talking about wrt PreparedStatement, but String is immutable, so you can't change its state at all, so maybe that's what's tripping you up?
    Good Luck
    Lee
    PS: I will venture a guess that this is the 3rd reply. Let's see...
    Ok, second. Close enough.
    Yeah, good on yer mlk, At least I beat Jos.
    Message was edited by:
    tsith

  • PSE 7 confusion about folder location, help needed

    Here's some background: I'm using PhotoShop Elements 7 on Win XP.  I have an external firewire hard drive I use for overflow/backups.  Originally, this showed up as a K: drive on my system.
    I added a RAID controller and two more drives to stripe as a single drive for temp space rendering movies.  This ended up as a K: drive and the external moved to L:  However, when I did this there were some pictures from my catalog that I had on the external drive.  I have used File > reconnect missing files to handle the moves, but PSE is still confused (very).
    PSE has started to mix up the RAID (K:) and external (L:) content.  If I move a set of pictures (e.g. a folder of them) onto the external drive (L:) via drag and drop in the folder location view, the folder will show up empty on the L: heirarchy, but will show up as a gray folder icon in the K: RAID drive hierarchy.  If I open up windows explorer, the RAID drive will appear empty.  In other cases (I'm not sure when/how yet), pictures physically end up on the RAID drive itself instead of the external.  I have uninstalled both the external drive and the RAID drive and reinstalled them both, but they are still getting confused in the folder view by PSE.  I've also tried moving content outside of PSE and just reconnecting missing files, but it still wants to put things under the K: RAID drive instead of the external L:.
    I've searched everywhere I can think of for a description of what gray folder icons in the folder location view means and can find none.  I'm not sure how to convince PSE that there's nothing on the RAID K: drive and it shouldn't try to connect the two.  Any suggestions?
    Thanks,
    Jim

    Thank you!  I ran psedbtool and the output shows the catalog has the wrong drive letter for the L: drive.
    Is there a way to make PSE forget about the K: and L: drives that it is so confused about so that it can relearn of their existence?  If I use the drive letter reassignment to fix PSE, it will break other apps that are now dependent on the current drive letter assignments.  I've tried removing all files from the L: drive, but it's still remembered as part of the catalog.
    Thanks,
    Jim
    psedbtool version 1.07
    Opening catalog C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\Catalogs\Moms pics\catalog.pse7db
    Photoshop Elements version:      7
    Total files               :   4833
    Total files missing       :      0
    Total files offline       :    278
    Total files wrong volume  :      0
    ****** Volumes with warnings: 1
    PSE Volume Table
    Path used by PSE        : F:
    Type                    : builtin_drive
    Status                  : online
    Total files             : 0
    Total files missing     : 0
    Total files wrong volume: 0
    Description             : MEDIA
    Serial                  : 1C2F-9805
    Drive_path_if_builtin   : F:
    Id                      : 32520
    Path used by PSE        : M:
    Type                    : builtin_drive
    Status                  : online
    Total files             : 938
    Total files missing     : 0
    Total files wrong volume: 0
    Description             : FreeAgent Drive
    Serial                  : 7830-2970
    Drive_path_if_builtin   : M:
    Id                      : 93626
    Path used by PSE        : E:
    Type                    : builtin_drive
    Status                  : online
    Total files             : 0
    Total files missing     : 0
    Total files wrong volume: 0
    Description             : GAMES
    Serial                  : 025A-4B70
    Drive_path_if_builtin   : E:
    Id                      : 93625
    Path used by PSE        : L:
    Type                    : builtin_drive
    Status                  : online
    Total files             : 114
    Total files missing     : 0
    Total files wrong volume: 0
    Description             : FreeAgent Drive
    Serial                  : 60AE-A816
    Drive_path_if_builtin   : K:
    Id                      : 31354
    ***** WARNING *****     : Wrong drive letter in catalog
    Path used by PSE        : \\dmzhost\media
    Type                    : network_drive
    Status                  : offline
    Total files             : 278
    Total files missing     : 0
    Total files wrong volume: 0
    Description             : //dmzhost/media
    Serial                  : //dmzhost/media
    Drive_path_if_builtin   :
    Id                      : 26948
    Path used by PSE        : J:
    Type                    : builtin_drive
    Status                  : online
    Total files             : 3503
    Total files missing     : 0
    Total files wrong volume: 0
    Description             : MEDIA2
    Serial                  : BAC0-B5A3
    Drive_path_if_builtin   : J:
    Id                      : 108
    Path used by PSE        : C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\Catalogs\Moms pics
    Type                    : database_relative_drive
    Status                  : online
    Total files             : 0
    Total files missing     : 0
    Total files wrong volume: 0
    Description             : database relative
    Serial                  : amoc:database_relative_volume
    Drive_path_if_builtin   :
    Id                      : 2
    Windows Drives
    Drive  Type             Serial     Path
    A:     removable_drive  0000-0000 
    C:     builtin_drive    9088-07F9 
    D:     builtin_drive    F408-1CB0 
    E:     builtin_drive    025A-4B70 
    F:     builtin_drive    1C2F-9805 
    G:     builtin_drive    242D-15ED 
    H:     readonly_drive   0000-0000 
    I:     builtin_drive    427D-3F6B 
    J:     builtin_drive    BAC0-B5A3 
    K:     builtin_drive    64E8-9846 
    L:     builtin_drive    60AE-A816 
    M:     builtin_drive    7830-2970
    Thanks so much for your help!
    Jim

  • Confused about schema..

    I'm currently working on a project using VB 2010 Express and Oracle 11g XE. On my Oracle My SQL Developer, I am currently logged on as 'user X' and I created three tables. All of which are just listed on the 'tables' tree. Does it mean that 'user X' is like a schema when compared to MySQL?
    I have already integrated my database to my vb project and is working fine ATM. I'm just really confused about schemas in Oracle 11g XE.

    I'm just really confused about schemas in Oracle 11g XE.http://docs.oracle.com/cd/E11882_01/server.112/e25789/intro.htm#CEGJFFFD

  • I am confused about Icloud. I have a 5 year old Macbook, a 2 year old macbook and a 5 year old mac mini. What exactly do I need to do to get all this connected via Icloud. I also have an Iphone 3G. Help please!

    I am confused about Icloud. I have a 5 year old Macbook, a 2 year old macbook and a 5 year old mac mini. What exactly do I need to do to get all this connected via Icloud. I also have an Iphone 3G. Help please! Also, I still don't understand exactly what the benefits are. At the moment it seems a lot of hassle to change a system that's been working perfectly well and that I'm very happy with. I'm not at all sure whether the mac mini (1.66 GHz INtel Core Duo) can be brought up to the relevant spec to run ICloud.  Any thoughts?

    There are two aspects to iCloud.  One is simply getting an account, or migrating a mobileme account to iCloud.  The second part is using the various features of iCloud to sync contacts, calendars, use music match or photo sharing, and store iWorks documents.
    First to get an iCloud account:
    If you have a mobileme account, you can migrate by simply logging onto www.icloud.com (ignore any references to Lion and just click through to complete the migration).  If you have OS X Lion or an iOS 5 mobile device, you can create an iCloud account on that device using any valid AppleID.
    Once you have an account, you can use JUST the mail account if you wishi - it is a standard IMAP account so you would set it up like any other IMAP email account you have, in whatever client program you use to read email.
    To use the OTHER feautes of iCloud, your computers will have to be running OS X Lion (10.7).  Your iPhone 3G will never be able to use iCloud as it cannot run iOS 5 (you need a min. of an iPhone 3GS to run iOS 5).
    The requirements for OS X Lion are here - http://www.apple.com/macosx/specs.html  You need a min. of a Core 2 duo processor so you mini is not capable of running Lion.
    So, in your case, the single reasons for iCloud would be if you have a mobileme account, then use the online www.icloud.com to migrate your account so you do not lose your @me.com email address.  You can use iCloud email (without using any other iCloud features) by setting it up as IMAP mail with these settings - http://support.apple.com/kb/HT4864
    If you want an iCloud account and do NOT already have a mobileme account, you will need to upgrade one machine at least to Lion in order to be able to create an iCloud account.

Maybe you are looking for