Confused about storing files in 1.5

I want to store my files in Aperture, not scattered about my hard drive. So I assume when importing I need to click on Store files in Aperture? Mine defaults to "In their current location." I just imported 2000 images and not sure what I had clicked.
Should I re-import those images?
I have read what the difference is, but not sure really what it means and what it does.
Thanks for your help.

Kevin,
There is a 'badge' to show that images are referenced (as opposed to fully managed in Aperture). It should be fairly obvious which button you pushed. Have a hunt around.
Paul

Similar Messages

IAd Unit sizes: I am a bit confused about the file limits

Say I have the bottom banner for iPad (hr) and full size iPad banner, what is the max iAdUnit size?
Is it: 350kb for full size iPad banner (including all the images included on that page), + 200kb for the bottom banner
Or how does it even work with sizes?

It appears that Lightroom will warn you when your original file (or XMP sidecar) is out of sync with the Lightroom database. In other words, if you import an image with no metadata, then add metadata within Lightroom, the Lightroom database will have metadata that the file (or XMP sidecar) will not. That is what the warning is concerning.
Nothing more, and no worries if you choose to ignore it. All current data would be in the database.
Actually, I suppose it is a little more complicated than that, but basically speaking, there's nothing to worry about. That being said, if you edit metadata in an outside application, and then tell Lightroom to sync the folder, I expect the warning will appear because the file (or XMP sidecar) now has data that the Lightroom database doesn't. The point is still the same...
Anyone with more than a day's worth of knowledge care to jump in and correct me?

Confused about .ffx files

I was watching a tutorial on aetuts and they offered a preset.
I downloaded the preset and its a .ffx file.
How do I open this file on After Effects?
I tried right clicking and selecting
"Open with After Effects"
but then I get the error message:
"After Effects error: Can't import file
"Type-on_Text_Preset.ffx"
unsupported filetype or extension"
( 0:: 1 )
I am running After Effect cs6

See this section of After Effects Help for an introduction to animation presets:
http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7c30 a.html#WS3878526689cb91655866c1103906c6dea-7ddaa
... especially this section on applying them:
http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7c30 a.html#WS3878526689cb91655866c1103906c6dea-7c2ba
Start here to learn After Effects: http://adobe.ly/bjBT3P

ITunes confused about .wma files

I had some .wma files in My Music. They, unsurprisingly, did not play on my new iPod. So I purchased them anew from iTunes. They now play on the computer and show up in the music library, but will not load onto my iPod. They still have an exclamation point next to them. I have tried removing the .wma files from My Music, at which point iTunes cannot find these tunes at all. Help!

*I just noticed that the software I have instaled in my laptop is not converting this kind of file (wma) to another one which can be played by ipod's*
Does that mean you're using a different kind of audio converter other than iTunes? If so, try converting the files through iTunes, as iTunes does have the ability to convert audio to a compatible format.
If you are already trying to use iTunes, then that is a different story. Do you know where you got the wma files from? Were they purchased online, or were they imported from CD using Windows Media Player?

About passwd file !!!!!!!!!

Dear Friends ,
I m confused about password file . Plz tell me , where contain SYS user password and other oracle user's passwd ?
Both are stored in the passwd file ?
My anotehr question , I know the "remote_login_passwordfile " parameter file are three types . NONE , Shared and Exclusive . I m not clear about this three types of options . Can u plz tell me the difference between them , so that I understand clearly .

+The [exclusive] password file can contain SYS as well as non-SYS users.+
Sorry to be picky, but the wording on that leaves a little bit to be desired.
A password file is only ever used for external authentication of privileged users, with "a privilged user" being defined as someone who can perform the five main classes of privileged action (startup, shutdown, backup, recover and create database). In fact, there is only ever one privileged user in this respect: SYS. Log on, for example, as fred/smith as sysdba in SQL*Plus and then do a show user and you will find you have been logged on as SYS. It doesn't matter what user names you supply (assuming they're valid usernames at all, of course), and you will find yourself always logged on as SYS.
So, you are right: 'grant sysdba to fred' causes fred's data dictionary credentials to be transferred to an exclusive password file, and that password file therefore must be said to contain 'non-SYS' users. But the minute Fred uses the fact that he has an entry in the password file to log on to the database as a privileged user, he will connect as SYS. He'll only connect as Fred if he doesn't use the 'as sysdba' clause of the logon command and therefore uses the internal authentication mechanism which is the data dictionary.
What you wrote isn't wrong, therefore, but it's potentially misleading, I think. It's also out-of-date, because it's not true for 10g... but see below for that.
I would have said:
1. The normal way to authenticate normal users of a database is to look up their details in a bunch of tables contained within the database itself (SYS.USER$, for example). This is called Data Dictionary Authentication, and the connection string would look like connect fred/smith
2. If you want to be authenticated as a user who is allowed to startup the database, however, it's not very helpful to discover that the only way of authenticating users is to look at tables inside the database you're trying to start up! There has to be an external authentication mechanism, allowing authentication of users even when the database hasn't even been created yet
3. In fact, there are two external authentication mechanisms: either you, the user of the operating system, can have membership of a special operating system group (dba on Unix, usually; ORA_DBA on Windows, usually). Or, a password file is created, using an Oracle tool that runs whether a database exists or not, called orapwd. These are called OS Authentication or Password File Authentication
4. No matter which external authentication mechanism you make use of, you will always end up logged on as SYS.
5. To indicate you want to use an external authentication mechanism, of either type, you add the as sysdba keywords to the standard logon string. Seeing that, Oracle will always check the operating system groups first to see if your OS account has group membership; if it fails there, then it looks for a password file, unless REMOTE_LOGIN_PASSWORDFILE=NONE (in which case, it doesn't bother looking for a file you've declared doesn't exist)
6. Password files, if they exist, can be SHARED (one per server, and all databases on that server can use it) or EXCLUSIVE (one per database, and not shareable) -but see below for more recent information about this. The principle difference these days between the two types is that the SYS password cannot be changed if the file is SHARED (and neither can any other of its contents), but can be if it's EXCLUSIVE.
7. If your password file is EXCLUSIVE, it must live in ORACLE_HOME/dbs (or ORACLE_HOME\database on Windows) and have a name that conforms to the OS-platform-specific default. On Windows, for example, that is pwdXXXX.ora, where XXXX is the ORACLE_SID.
I don't want to confuse anyone, either, but in fact the story has changed a bit with 10g, because EXCLUSIVE is no longer documented as a valid value for REMOTE_LOGIN_PASSWORDFILE. See http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams179.htm#REFRN10184. It's still supported for backwards compatibility, and it's in fact still the default, but allegedly -according to that document- an EXCLUSIVE password file behaves exactly like a SHARED one. That is sort-of true, in the sense that it's now possible for a SHARED file to contain details of users who aren't called SYS. However, it's still impossible to add a non-SYS user into a password file which is in SHARED mode (so, in a sense, setting SHARED locks the password file from any modification -including changing SYS's password).
But you can now do this for example:
set R_P_L=EXCLUSIVE
grant sysdba to scott;
set R_P_L=SHARED
bounce instance
show parameter remote_login -> proves the password file in use is SHARED
select * from v$pwfile_users; -> both SYS and SCOTT will be listed, even though the password file is SHARED
grant sysdba to fred; -> This will produce an ORA-01999: password file cannot be updated in SHARED mode error
In earlier versions of Oracle, that demo would have failed at step 3, because the existence of SCOTT in the password file would have prevented the file from becoming a SHARED one.

I'm a bit confused about standby log files

Hi all,
I'm a bit confused about something and wondering if someone can explain.
I have a Primary database that ships logs to a Logical Standby database.
Everything appears to be working properly. If I check the v$archived_log table in the Primary and compare it to the dba_logstdby_log view in the Logical Standby, I'm seeing that logs are being applied.
On the logical standby, I have the following configured for log_archive_dest_n parameters:
*.log_archive_dest_1='LOCATION=/u01/oracle/archivedlogs/ORADB1
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PNX8A_GMD'
*.log_archive_dest_2='LOCATION=/u02/oracle/archivedlogs/ORADB1
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PNX8A_GMD'
*.log_archive_dest_3='LOCATION=/u03/oracle/archivedlogs/ORADB1
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PNX8A_GMD'
*.log_archive_dest_4='SERVICE=PNX8A_WDC ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=PNX8A_WDC'
*.log_archive_dest_5='LOCATION=/u01/oracle/standbylogs/ORADB1
VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=PNX8A_GMD'
*.log_archive_dest_6='LOCATION=/u02/oracle/standbylogs/ORADB1
VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=PNX8A_GMD'
*.log_archive_dest_7='LOCATION=/u03/oracle/standbylogs/ORADB1
VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=PNX8A_GMD'
Here is my confusion now. Before converting from a Physical standby database to a Logical Standby database, I was under the impression that I needed the standby logs (i.e. log_archive_dest_5, 6 and 7 above) because a Physical Standby database would receive the redo from the primary and write it into the standby logs before applying the redo in the standby logs to the Physical standby database.
I've now converted to a Logical Standby database. What's happening is that the standby logs are accumulating in the directory pointed to by log_archive_dest_6 above (/u02/oracle/standbylogs/ORADB1). They do not appear to be getting cleaned up by the database.
In the Logical Standby database I do have STANDBY_FILE_MANAGEMENT parameter set to AUTO. Can anyone explain to me why standby log files would continue to accumulate and how I can get the Logical Standby database to remove them after they are no longer needed on the LSB db?
Thanks in advance.
John S

JSebastian wrote:
I assume you mean in your question, why on the standby database I am using three standby log locations (i.e. log_archive_dest_5, 6, and 7)?
If that is your question, my answer is that I just figured more than one location would be safer but I could be wrong about this. Can you tell me if only one location should be sufficient for the standby logs? The more I think of this, that is probably correct because I assume that Log Transport services will re-request the log from the Primary database if there is some kind of error at the standby location with the standby log. Is this correct?As simple configure as below. Why more multiple destinations for standby?
check notes Step by Step Guide on How to Create Logical Standby [ID 738643.1]
>
LOG_ARCHIVE_DEST_1='LOCATION=/arch1/boston VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=boston'
LOG_ARCHIVE_DEST_2='SERVICE=chicago LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=chicago'
LOG_ARCHIVE_DEST_3='LOCATION=/arch2/boston/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=boston'
The following table describes the archival processing defined by the initialization parameters shown in Example 4-2.
     When the Boston Database Is Running in the Primary Role      When the Boston Database Is Running in the Logical Standby Role
LOG_ARCHIVE_DEST_1      Directs archival of redo data generated by the primary database from the local online redo log files to the local archived redo log files in /arch1/boston/.      Directs archival of redo data generated by the logical standby database from the local online redo log files to the local archived redo log files in /arch1/boston/.
LOG_ARCHIVE_DEST_2      Directs transmission of redo data to the remote logical standby database chicago.      Is ignored; LOG_ARCHIVE_DEST_2 is valid only when boston is running in the primary role.
LOG_ARCHIVE_DEST_3      Is ignored; LOG_ARCHIVE_DEST_3 is valid only when boston is running in the standby role.      Directs archival of redo data received from the primary database to the local archived redo log files in /arch2/boston/.
>
Source:-
http://docs.oracle.com/cd/B19306_01/server.102/b14239/create_ls.htm

Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

Support for the Nikon D750 was introduced in the latest version of LR 5.7 and ACR 8.7 on Novemder 18th 2014.
Further updates to LR 4 were stopped when LR 5 was released on June 9th 2013. No further updates for bug fixes and new camera support.
Nada, LR 4 will never support Nikon D750. The Nikon D750 was introduced into the market in September 2014 some 15 months after further development of LR 4 was discontinued.
You can use the Adobe DNG program (free download for the package) to convert the Nef (raw) files from your Nikon D750 to the Adobe DNG format which will permit you to import those into LR 4. This is the crutch provided by Adobe to allow for the processing of raw files with outdated versions of LR and ACR.
You can also update the ACR plugin for PS CS6 to version 8.7 which can also work with the raw files from the D750. For direct support in Lightroom you will need to upgrade (paid) to version 5.7.

Not sure about derviatives, file types, and export for lightroom

hello:
I am a new LR user and new to the DAM process. I am confused about something that is probably basic and fundamental to this process. My computer setup is two internal drives (working drive and a photo archive), as well as external backup and burning to dvd. Using LR for both image adjustment and catalog management (not using Photoshop). For raw I will be converting to dng on ingestion. I will add bulk metadata on ingestion and then bring images into LR to rate images and make basic image adjustments. These images will then be archived as originals.
Now, if I perform additional work on any of these archived images (addl. image adjustment or metadata) would these images be considered derviatives? If so, would I then go to export in LR to add to file name (e.g., masterfile, master.dng or .tif) before sending to, for instance, a working derviative folder before sending off to the archive?
Also, if I am sending these images to archive, but not sending out for email or web, do I need to change the dng to another file type (e.g., tif)?
Lastly, I have some old jpegs on media cards that I want to put through this process. Is there anything special that I need to do in handling these images versus dealing with raw?
I have read the DAM book as well as reading through various online resources, but this whole process is quite confusing for a beginner.
Please respond anytime.
Thanks
joe.

Lightroom is a non-destructive editor. This may be different than anything you have used in the past.
With non-destructive editors, there is no concept of original and derivative (unless you choose to use a 2nd program like Photoshop, sounds like you're not planning to do that). With a non-destructive editor, you make your changes in the editor (Develop Module), and these instructions are stored by Lightroom as a "recipe" and not as a distinct file on your hard disk. These instructions about your edits are applied whenever you use Lightroom to view your image (or whenever you choose to print from Lightroom or make a slidesehow from LR or make a web page from LR). The original is completely unchanged, and there is no edited derivative photo exported or saved. Thus, there is no need to segregate original and edited photo, because there is no saved edited photo. Additional edits in Lightroom are handled the same, original is unchanged, your edits are stored, and there is no derivative or saved photo.
The only time you would save a copy of the photo is if you wanted a copy for some non-Lightroom purpose, in which case you use File->Export... to make a file on disk in a "temporary" folder, then you use the file created in whatever non-Lightroom purpose you have, and when completed, you can delete the file in the temporary folder, knowing that LR can re-create it exactly if you ever need it again. If you are going to print from LR, or e-mail from LR, or create a web page from LR, or create a slideshow from LR, you do not need to create an exported photo.
JPGs and RAWs and DNGs are all handled the same by you, the user. Yes, there is internal differences that aren't important to your workflow.

Confusion about digital audio handling in Apple eco-sphere

Confusion among Apple users. We need some answers about bit rate and word lengths in the Apple eco-sphere. This is the source material we have today:
CD 16/44.1 -> iTunes rip at 16/44.1
CD 16/44.1 -> iTunes rip at 16/48
HD audio 24/96 -> iTunes 24/96 downloads (maybe in FLAC or WAV converted to AIFF or ALAC?)
On the Mac lots of things happen with audio:
1 Conversion programs are available for CD ripping and file format changes. I have a small contribution to this part of the confusion, I purchase FLAC files and convert to AIFF using the program XLD, which seems to me to be ideal. Others may have different solution. iTunes also has a good reputation for direct CD ripping.
2 The setting of AudioMIDI (number of bits and rate) can be changed for the output up to 24/96, what effect does this have? I know for certain you have to restart iTunes if you change the settings as it reads them only once at startup.
3 Playing a file with a different bits/rate may or may not up-/down-sample. For example with AudioMIDI set to 24/96, what comes out when you play a 16/44.1 file? And vice versa, play a 24/96 with AudioMIDI set to 16/44.1, what comes out? Is it the setting of AudioMIDI that defines the output itself or the setting iTunes reads from AudioMIDI when it starts up?
For example if I start iTunes with AudioMIDI set at 16/44.1, then change it to 24/96, does iTunes continue to output 16/44.1 or does the system up-sample to 24/96? And vice versa.
4 Now the confusion gets worse if you stream the files to an Airport Express or New Apple TV. What conversions does iTunes make, does AudioMIDI have any effect, what is the bits/rate spec for the stream,is this different for Ethernet wired or WiFi connections, what conversion do the AE or ATV do, if any, and what does it output for each of the stored file types.
We need a complete and clear description of all of these issues so we can resolve the many, many discussions that are on the forum.
Any volunteers to prepare the manual?

I have had no issues with the D3 and Apple TV working after sleep. Indeed, there is no data connection between the two except that the Apple TV sends a laser based digitial audio signal to the D3 for DA conversion. The D3 does not communicate with the Apple TV and the Apple TV does not signal to the D3 that it is asleep or awake. The D3 just sits there and waits for the light to come in for conversion to analog.
I suspect your problem is in the Apple TV. Perhaps you have a bad unit and need to get a replacement under warranty (ASAP if still under the 90 day but hopefully you bought the Apple care 1-3 year warranty with it?) Regardless, even out of warranty, if you make an appointment with an Apple store via the web, show up, very nicely tell the Genius Bar person that the toslink feature seems to never have been working (does not matter that it goes to a D3 or a $6000 DAC so don't mention it!), they will check your warranty, see that it is bad, and 9 times out of ten, hand you a brand new Apple TV unit! They take the old one back, refurb it, and resell it. No one looses. Be nice the whole time! Even if they say you are out of luck, just be nice. Nice really works at the Apple store!
The other issue that might cause this is syncing. If the D3 or Apple TV are hooked up to a power strip that shuts off to save power (or that you shut off manually), this might unsync the two. So leave both on power lines that always remain on. That's how I have mine set up.

So, iDisk (great with MobileMe) is closed! Ok. I got the most expensive iCloud Plan and LOVED storing files online. Is that REALLY OVER??!! (besides Numbers', Pages', and Keynote's docs sync).. Will I REALLY have to downgrade to "free" on iCloud?!!

So, iDisk (great with MobileMe) is closed! Ok. I got the most expensive iCloud Plan and LOVED storing files online. Is that REALLY OVER??!! (besides Numbers', Pages', and Keynote's docs sync).. Will I REALLY have to downgrade to "free" on iCloud and PAY for "DropBox", "Google Drive" or "Microsft's Sky Whatever.."?!!
I could not log in to this Support Community with my UPDATED Apple ID (and this is another issue I can't believe Apple just says "NO, you CAN'T!" - deleting other (old) Apple IDs we've created by mistake or a long time ago and being able to have it all on ONE SINGLE UPDATED Apple ID - ALSO saving Apple's storage servers, etc.).
Anyway, my Apple ID for better communication is [email protected] (but I really couldn't log in here - it kept saying that the e-mail is already registered, etc. I know it, I'm trying to use it here, that's all...
So, really. Of course a lot of people don't care about the iDisk issue. That's fine, we all love and hate specific apps or software.. But why has Apple just shut it down, since it was so EASY to use (as DropBox) on all our Apple devices?!! So, we really can't upload/store any kind of files anymore and that's it?!
I used iDisk when MobileMe was still alive, and it was great to have my files from work, home, any backup (whatever we want) uploaded and synced and used in our Macs, iPhones and iPads. If we have the OPTION of an iCloud Plan (the top one, for example), but we just don't like the automatick backups for the iPhones and iPads, nor the Pictures' sync function.. Why can't we just have the SAME simple and efficient/great service of the iDisk installed in each device?!
Do we really have to go back and downgrade back to the free iCloud Option (just for keeping the e-mail) and paying extra for DropBox, Google, Microsoft, any other services?! I have nothing against them - I actually have DropBox and it works great because it REMINDS me of iDisk!! But WHY NOT just keep it simple and closed with 1 company/platform/option - Apple's iOS, OSX, etc.
That's why I decided to have a Macbook Pro, an iPhone 4S and an iPad 3rd. Generation (for example, along with other products and services such as Apple TV).. I know I'm CHOOSING to stay with 1 world, that's fine. And that's why I didn't (yet) go for a Samsung phone or another tablet.. I wanna stick with 1 pattern and I have chosen Apple's..
Just can't understand such an innovative company make such decisions (such as shutting down iDisk or not letting us just DELETE Apple IDs we do NOT use anymore).. Please, just some guidance or confirmation if that's correct: No way of uploading files others than Numbers', Pages' or Keynote's!!??
Thank you very much!!
Peace.

Thank you Roger.
That's exactly what I was afraid of...
During all the time I have been a loyal customer of Apple's products and services, these have been the only 2 issues that I really can't understand (specially when we look at Apple's strategies and management)...
1) Not being able to DELETE (simply delete or deactivate) old or duplicated Apple IDs... I have 3 different Apple IDs but only one is the real Apple ID I use for everything, with all my purchases and services (such as e-mail) related to it (Why won't Apple jus let people delet, deactivate or - at least - merge Apple IDs?! That would help everyone, including Apple when we think about costs, storage, database maintenance, etc.) - Actually, even when I gave up on trying to delete other Apple IDs, I tried to have the one I really use and have organized to use my @me.com address as the Apple ID itself (as Apple asks us to do - and makes sense, of course). But never worked. Just because I created that Apple ID with a @hotmail.com account (since it asks for a valid e-mail when you create an Apple ID, it NEVER lets me now change my Apple ID to my @me.com e-mail address - I mean JUST having my @me.com e-mail address as my primary e-mail and my Apple ID (for example, having that old @hotmail.com e-mail address out of it, cleaned..)!
2) The other issue was this one, about iDisk. Of course there must be reasons for having it shut down, maybe the apps used by iPhone and iPad, along with the folder on Mac OSX, is way too complicated, expensive, full of bugs, I don't know. But if we decide to pay for 50GB of online storage, why even THINK about different options for files we use?! I have Dropbox, I've read about Google Drive and Microsoft SkyDrive, etc. But I just wanted to STICK with a single ALL-APPLE solution.. That is.. Pay the annual fee for the 50GB and just still keep any file I want on the cloud with iDisk. So, what Apple tells me is that if I have other files than iWork or PDF (and some few exceptions), I should actually downgrade to "free" iCloud and decide to PAY for another solution (organization), such as DropBox, Google Disk or Drive (I don't really know), Micrsoft's SkyDrive..
Of course there's the strategy of getting more and more people to use Pages, Numbers and Keynote (buying them for iOS and Mac OSX, as I already have and love them). But "killing" iDisk and just telling users to look for other storage solutions doesn't really sound like Apple.
I have seen so many questions here about both issues (deleting or merging Apple IDS + iDisk back since we pay for storage) that I really believe Apple should reconsider these issues or, at least, open the issue and let us know what would be the best "partner solution" for iCloud...
Thanks a lot!
All the best...
Eduardo Rocha.
[email protected]

Question about download file in OAS4

Question about download file in OAS4:
I use Oracle Application Server 4.0.7 on my Windows NT 4.0 SP6;
I use PL/Sql Cartridge developer a document system; It's use the
upload/download in PL/Sql Cartridge;
I read the document , the Upload/download in Pl/Sql Base on the
Oracle Application Server's Content Service. the Problem is when I
download a document, If I upload a Html or MsWord file, It will store in a LongRaw column, when me download ; It's tell me can't
find a application to open this file; I will select a application
from list to open the download file;
As normal, It will open MsWord Automatic when download a "doc" file ; also It will open a new window of Browser to view a Html file;
I check the download process on client Browser; when download
file, The content-type always return "application/octet-stream";
Also the download File will lost the postfix of the file,
So Browser don't open the File Automatic;
I think If I set the correct Content-Type , Browser can know how open the file; So I use owa_content.set_content_type procedure
set the Doc file to "application/msword" , but the WEb Server always
return "application/octet-stream";
I didn't know how to do this problem, Plese help me.
null

I have a Tecra M2 and rely on your email update to ensure I have the latest drivers on my machine.
When I received a Toshiba support email on 14 April 2005 giving reference to a QFE from Microsoft I assumed it would be necessary for my Tecra.
I was very confused when I found that this QFE and subsequent ones posted on the 16 April 2005 relate to Pre SP2 critical updates no9t required if one has already taken earlier advice of updating to Service Pack, at the very least your narrative should make mention of this. I find it very difficult to believe that your updates are two+ years out of date.

Confused about transaction, checkpoint, normal recovery.

After reading the documentation pdf, I start getting confused about it's description.
Rephrased from the paragraph on the transaction pdf:
"When database records are created, modified, or deleted, the modifications are represented in the BTree's leaf nodes. Beyond leaf node changes, database record modifications can also cause changes to other BTree nodes and structures"
"if your writes are transaction-protected, then every time a transaction is committed the leaf nodes(and only leaf nodes) modified by that transaction are written to JE logfiles on disk."
"Normal recovery, then is the process of recreating the entire BTree from the information available in the leaf nodes."
According to the above description, I have following concerns:
1. if I open a new environment and db, insert/modify/delete several million records, and without reopen the environment, then normal recovery is not run. That means, so far, the BTree is not complete? Will that affact the query efficiency? Or even worse, will that output incorrect results?
2. if my above thinking is correct, then every time I finish commiting transactions, I need to let the checkpoint to run in order to recreate the whole BTree. If my above thinking is not correct, then, that means that, I don't need to care about anything, just call transaction.commit(), or db.sync(), and let je to care about all the details.(I hope this is true :>)
michael.

http://www.oracle.com/technology/documentation/berkeley-db/je/TransactionGettingStarted/chkpoint.html
Checkpoints are normally performed by the checkpointer background thread, which is always running. Like all background threads, it is managed using the je.properties file. Currently, the only checkpointer property that you may want to manage is je.checkpointer.bytesInterval. This property identifies how much JE's log files can grow before a checkpoint is run. Its value is specified in bytes. Decreasing this value causes the checkpointer thread to run checkpoints more frequently. This will improve the time that it takes to run recovery, but it also increases the system resources (notably, I/O) required by JE.
"""

Confused about standby redo log groups

hi masters,
i am little bit confuse about creating redo log group for standby database,as per document number of standby redo group depends on following equation.
(maximum number of logfiles for each thread + 1) * maximum number of threads
but i dont know where to fing threads? actually i would like to know about thread in deep.
how to find current thread?
thanks and regards
VD

is it really possible that we can install standby and primary on same host??
yes its possible and i have done it many times within the same machine.
For yours confusion about spfile ,i agree document recommend you to use spfile which is for DG broker handling if you go with DG borker in future only.
There is no concern spfile using is an integral step for primary and standby database implementation you can go with pfile but good is use spfile.Anyhow you always keep pfile on that basis you created spfile,i said you make an entry within pfile then mount yours standby database with this pfile or you can create spfile from this pfile after adding these parameter within pfile,i said cause you might be adding this parmeter from SQL prompt.
1. logs are not getting transfered(even i configure listener using net manager)
2.logs are not getting archived at standby diectory.
3.'ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION' NEVER COMPLETE ITS RECOVERY
4. when tried to open database it always note it 'always' said system datafile is not from sufficiently old backup.
5.i tried 'alter database recover managed standby database camncel' also.Read yours alert log file and paste the latest log here..
Khurram

PSE 7 confusion about folder location, help needed

Here's some background: I'm using PhotoShop Elements 7 on Win XP. I have an external firewire hard drive I use for overflow/backups. Originally, this showed up as a K: drive on my system.
I added a RAID controller and two more drives to stripe as a single drive for temp space rendering movies. This ended up as a K: drive and the external moved to L: However, when I did this there were some pictures from my catalog that I had on the external drive. I have used File > reconnect missing files to handle the moves, but PSE is still confused (very).
PSE has started to mix up the RAID (K:) and external (L:) content. If I move a set of pictures (e.g. a folder of them) onto the external drive (L:) via drag and drop in the folder location view, the folder will show up empty on the L: heirarchy, but will show up as a gray folder icon in the K: RAID drive hierarchy. If I open up windows explorer, the RAID drive will appear empty. In other cases (I'm not sure when/how yet), pictures physically end up on the RAID drive itself instead of the external. I have uninstalled both the external drive and the RAID drive and reinstalled them both, but they are still getting confused in the folder view by PSE. I've also tried moving content outside of PSE and just reconnecting missing files, but it still wants to put things under the K: RAID drive instead of the external L:.
I've searched everywhere I can think of for a description of what gray folder icons in the folder location view means and can find none. I'm not sure how to convince PSE that there's nothing on the RAID K: drive and it shouldn't try to connect the two. Any suggestions?
Thanks,
Jim

Thank you! I ran psedbtool and the output shows the catalog has the wrong drive letter for the L: drive.
Is there a way to make PSE forget about the K: and L: drives that it is so confused about so that it can relearn of their existence? If I use the drive letter reassignment to fix PSE, it will break other apps that are now dependent on the current drive letter assignments. I've tried removing all files from the L: drive, but it's still remembered as part of the catalog.
Thanks,
Jim
psedbtool version 1.07
Opening catalog C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\Catalogs\Moms pics\catalog.pse7db
Photoshop Elements version:      7
Total files               :   4833
Total files missing       :      0
Total files offline       :    278
Total files wrong volume :      0
****** Volumes with warnings: 1
PSE Volume Table
Path used by PSE        : F:
Type                    : builtin_drive
Status                  : online
Total files             : 0
Total files missing     : 0
Total files wrong volume: 0
Description             : MEDIA
Serial                  : 1C2F-9805
Drive_path_if_builtin   : F:
Id                      : 32520
Path used by PSE        : M:
Type                    : builtin_drive
Status                  : online
Total files             : 938
Total files missing     : 0
Total files wrong volume: 0
Description             : FreeAgent Drive
Serial                  : 7830-2970
Drive_path_if_builtin   : M:
Id                      : 93626
Path used by PSE        : E:
Type                    : builtin_drive
Status                  : online
Total files             : 0
Total files missing     : 0
Total files wrong volume: 0
Description             : GAMES
Serial                  : 025A-4B70
Drive_path_if_builtin   : E:
Id                      : 93625
Path used by PSE        : L:
Type                    : builtin_drive
Status                  : online
Total files             : 114
Total files missing     : 0
Total files wrong volume: 0
Description             : FreeAgent Drive
Serial                  : 60AE-A816
Drive_path_if_builtin   : K:
Id                      : 31354
***** WARNING *****     : Wrong drive letter in catalog
Path used by PSE        : \\dmzhost\media
Type                    : network_drive
Status                  : offline
Total files             : 278
Total files missing     : 0
Total files wrong volume: 0
Description             : //dmzhost/media
Serial                  : //dmzhost/media
Drive_path_if_builtin   :
Id                      : 26948
Path used by PSE        : J:
Type                    : builtin_drive
Status                  : online
Total files             : 3503
Total files missing     : 0
Total files wrong volume: 0
Description             : MEDIA2
Serial                  : BAC0-B5A3
Drive_path_if_builtin   : J:
Id                      : 108
Path used by PSE        : C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\Catalogs\Moms pics
Type                    : database_relative_drive
Status                  : online
Total files             : 0
Total files missing     : 0
Total files wrong volume: 0
Description             : database relative
Serial                  : amoc:database_relative_volume
Drive_path_if_builtin   :
Id                      : 2
Windows Drives
Drive Type             Serial     Path
A:     removable_drive 0000-0000
C:     builtin_drive    9088-07F9
D:     builtin_drive    F408-1CB0
E:     builtin_drive    025A-4B70
F:     builtin_drive    1C2F-9805
G:     builtin_drive    242D-15ED
H:     readonly_drive   0000-0000
I:     builtin_drive    427D-3F6B
J:     builtin_drive    BAC0-B5A3
K:     builtin_drive    64E8-9846
L:     builtin_drive    60AE-A816
M:     builtin_drive    7830-2970
Thanks so much for your help!
Jim

Can't find my stored files -

I have an iPhoto Library on my Main computer;
I have another iPhoto Library on an exterior drive. Although it only shows up when I search Spotlight, this external drive has the Library.iPhoto file along with a Library6.iPhoto file. and... It appears to mirror my desktop iPhoto Library that stored on the main computer exactly as I use my desktop iPhoto application. ??
? I can't open any folder to view the original stored files (not that I care to change them). But I used to be able to see these stored pictures in their folders?
? This mirroring would seem to be a great backup solution but I can't find any discussions and am now thinking there is a problem that should be fixed?
I don't get it.
Thanks for any ideas...

Your files are stored in the iPhoto Library. By default this is in your Pictures Folder. With iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Unix Style Package File. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
The Library.iPhoto file and the library6.iphoto files are elements within the Library. They are databases and contain no photos themselves.
Iphoto has no facility to mirror itself, so I’m not sure what’s on that other drive, unless you have run some back up utility on it.
Some FYI:
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 Only*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and 10.5* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Regards
TD

Confused about storing files in 1.5

Similar Messages

Maybe you are looking for