Confused about why LR 4.3 won't export jpgs

Good evening, major frustration.
I apparently cannot export some jpegs from my catalogs after about 4pm this afternoon.
Win 7 64 bit-24gigs ram LR 4.3 exporting onto Local h
LR 4.2 simply stopped at 12% exporting low res files to a local HD-
rather than bore with specifics location suffice to say, there was nothing different in the manner in which the files were exported that worked previously.
The program simply stated it was exporting the files, then promptly stopped.
I upgraded to LR 4.3 in the hopes that something would fix, nothing did.
however I can export full res 300 dpi @ 100 quality with no restrictions, while this is fine, I need to produce low res watermarked versions for online as well as registration.
Whilst I appreciate inquiry about what I am doing differently, please note the answer is nothing, my workflow is the same as it was for years.
I'm hoping someone could think outside the box (and that doesn't mean do I have Admin privleges?) and suggest what might be INTERRUPTING the output of lower res jpegs, or what signals might have been corrupted.
*I have not changed any program, altered any firewall, etc. etc. prior to this problem occurring, it simply started.
I am positive that it's some kind of interference with the command, I simply do not possess the technical know-how to spot check local/app/local settings gobbeldy-****...Damn it Jim, I'm a photographer, not a code breaker.
So, any input that doesn't involve the previously mentioned spot fixes like-reboot-upgrade-admin-new program, and instead can suggest WHY this is happening, and thus teaching me to fish in this instance.
would be appreciated.
Again-export to (local HD) will not operate, simply hangs whilst the memory usage of the CPU increases and increases, the program is doing something-it just isn't producing jpegs. (and no-these jpegs are being looked for in the correct location)
thanks

You are going to have to render using lightroom in order to use the latest ACR updates since you can no longer get ACR updates for PS CS4.  But when you click on Render using LR, it still should open in CS4 I would think.  You might be able to fix this by telling LR that you have another editing program, CS4, and then select it instead of the generic photoshop at the top of the this.  But I would not think that you would have to do this. 

Similar Messages

  • Confused about the instructions for installing MySQL on my OS X client

    I installed MySQL for OS X as recommended here:
    http://developer.apple.com/internet/opensource/osdb.html
    it looks like I managed to created a test database in the mysql directory, but now can't access it.
    Basically, I'm confused about what to do after installing the MySQL server about setting permissions, getting databases to be where I want them to be, etc.
    I tried download phpMyAdmin, since I am used to using that via cPanel on my ISP, but don't know how to use it on my Mac. Do I need to start up Apache to do that? And if I do that, won't it interfere with the mongrel server that I'm trying to use in the separate Ruby on Rails instructions?
    I guess I could probably do all my development online via my ISP, which supports Ruby on Rails and where it is easy to set up MySQL databases, but if I could just figure out how to use MySQL on my Mac it would be fun to try to do this development offline.
    Any hints?
    Thanks,
    doug

    Have you done anything past those instructions? like creating MySQL user accounts, granting permissions, etc?
    There's a whole lot more to running MySQL that just installing it (and I'm not sure why Apple suggest building from scratch when MySQL offer binary distributions which do all the hard work for you.
    Once installed you should follow the MySQL Post Install Instructions for guidance on setting up accounts and configuring MySQL.
    As for the PHPMyAdmin question, yes, you'll need Apache running. Whether that will conflict with any other web services you're running depends on how they're configured. I've never heard of mongrel to be able to advise further there.

  • "About this Mac"  (System Profiler) won't open

    I have been having some strange problems with my computer. I got a new MBA a couple of weeks ago. I installed 10.6.4 with all the old folders and files from the old computer (MBA too Rev C).
    Now "About this Mac won't open". It opened before I shifted everything over to the new computer.
    The other thing is that an external USB drive won't mount. It mounts on the Powerbook I have and I can move files from and to it. However, on the new MBA, only the external drive appears. The other part is grayed out, and it doesn't mount, as I have said.
    I don't know whether these two things are related or not but I thought I would just mention this other problem I just noticed at the same time. (I will make a new question about it.)
    The external USB memory drive is formatted to MacOSX extended journal.
    I did repair and verify on Disk Utility and these things checked out OK.
    I just checked it on the old MBA (same OS) and it mounts fine and I can manipulate contents of the drive.
    Is it something to do with firmware issues?
    I just tested another USB memory drive and it has the same problem as the other USB memory drive.
    I don't know what my next step is.
    I want to use the newer MBA instead of having to use the older MBA and the Powerbook to use the USB memory drives. These USB memory drives are USB 2.0. As I have said they work fine on the other older computers.
    On the older MBA, "About this Mac" works fine.
    I haven't done that much since I migrated everything over to the new MBA. I have just been surfing the Internet. I don't know when the System Profiler failed to work. I tried to open it for the first time since I moved the contents of the old MBA over just now.

    I opened System Profiler by launching it from Utilities.
    It comes up with a different name to the admin name though. Maybe that's why it won't open from "About this Mac"?
    For example, the computer's name when I set it up using the USB installer stick is "Harry Potter".
    But the old MBA that I had was named "js".
    When I install programs, it comes up with "Harry Potter", put in password.
    However, when I look up the System Profiler information using Utilities, it comes up with "js's MacBook Air (2)".
    Does that matter?
    Is the name thing causing the problem with the "About This Mac" not opening?
    I am really confused about all of this.
    The information in the System Profiler is about the newer MBA.
    Should I just not worry about this problem? And just open it up from Utilities if I need to look up System Profiler information?

  • Help, my hard drive is about to die and icloud won't let me sign in it's saying you can't sign in becauseof server error

    Help, my hard drive is about to die and icloud won't let me sign in it's saying "you can't sign in becauseof server error"

    The best approach would be to take the iPad to the school's IT person and see what is going wrong, why it will not accept your sign-in.  That person can make sure the userid and password are correct on the iPad.

  • Confuse about Configuring Oracle Warehouse Builder

    newbie here... i am abit confuse on how to configure the Oracle Warehouse builder...
    I have 2 database... 1 source and 1 new one...
    I understand that i have to install the Runtime Repository in the database computer and the Target Schema through the client's computer...
    so all this while... i am just confuse about what to install into the source database and what to install into the new database...
    Please help...

    Location is a logical entity in your OWB design that can be either a database schema, a flat file location, an SAP application location etc. Once you complete your design and are ready to deploy the design into the runtime environment, you will have to 'register' the locations by providing the physical details of your location to OWB (user name/password, database, hostname etc.).
    I am a bit confused by your configuration - are the source and the target in two separate schemas or in the same schema? Your posts are somewhat contradictory.
    If they are in two different schemas, you should:
    1. Create a source module pointing to a source schema (you can then import data object structures from the source schema - i.e. you don't have to create source tables manually in OWB, but you can import them into the module automatically). This module will have a source location (for example SRC_LOC).
    2. Create a target module where all your target objects will be (i.e. where the data will be loaded). This module will have a different location (TGT_LOC). In your target module you will also create the mappings.
    3. When deploying, you will register SRC_LOC with the physical details of your source schema, while the target location will be registered with the physical details of the target schema. The code generated by OWB during deployment will make sure that the data is extracted from the source schema and inserted into the target schema (either by generating and using DB links or by qualifying the schemas in the extraction queries if source and target are in the same database instance).
    On the other hand, if both source and target objects are in the same db schema, you can have all your objects in the same target module and you will only have to register the location of this target module when deploying (LOC_TGT).
    That said, there can be a variety of reasons why there is no data in the target after you run the extract mapping that have nothing to do with locations, such as logical errors in the mapping (an inappropriate filter or a wrong join), insufficient privileges etc. I suggest you take a look in the runtime audit browser that should contain the error messages relative to your mapping.
    Regards:
    Igor

  • Confusion about Kodo and JCA

    Hi,
    I'm a bit confused about Kodo's Connection Architecture strategy. It is my understanding that
    PMF's can be built to use the connection architecture. Along this line, one would configure the
    ConnectionFactory or ConnectionFactoryName, and possibly the ConnectionFactory2 and
    ConnectionFactory2Name properties in a PMF. The result of the PMF implementation supporting the
    connection architecture is nice integration with the application servers in terms of security,
    transaction, and connection management. One can lookup in JNDI a reference to a Kodo PMF that
    supports datastore transactions or to another one that supports optimistic transactions or to
    another one that supports NTR, and with proper settings of the transactional properties and suitable
    application code, one's sesson bean will work.
    But from what I can see of Kodo's JDOPersistenceManagerFactory class, it, itself, implements the
    ManagedConnectionFactory interface, meaning, I think, that this class is resource adaptor. And that
    the part that confuses me. Why would Kodo be a resource adaptor? I thought it used a resource
    adaptor, which I think is the same thing as a connection factory.
    Anyway, I'm puzzled, and I'm hoping that someone could straighten me out.
    David Ezzio

    David-
    The fact that Kodo can integrate into an application server as a
    Resource Adaptor, and section 3.2.2 of the specification that says that
    the PersistentManagerFactory should be able to utilize a Resource
    Adaptor to obtain connections to the data store are two separate issues.
    We implement Kodo itself as a Resource Adaptor in order to provide ease
    of integration into recent application servers. Your confusion is
    understandable, since we do not actually yet support the use of Resource
    Adaptors as the Connection Factories as per section 3.2.2.
    Does that make sense?
    David Ezzio <[email protected]> wrote:
    Hi,
    I'm a bit confused about Kodo's Connection Architecture strategy. It is my understanding that
    PMF's can be built to use the connection architecture. Along this line, one would configure the
    ConnectionFactory or ConnectionFactoryName, and possibly the ConnectionFactory2 and
    ConnectionFactory2Name properties in a PMF. The result of the PMF implementation supporting the
    connection architecture is nice integration with the application servers in terms of security,
    transaction, and connection management. One can lookup in JNDI a reference to a Kodo PMF that
    supports datastore transactions or to another one that supports optimistic transactions or to
    another one that supports NTR, and with proper settings of the transactional properties and suitable
    application code, one's sesson bean will work.
    But from what I can see of Kodo's JDOPersistenceManagerFactory class, it, itself, implements the
    ManagedConnectionFactory interface, meaning, I think, that this class is resource adaptor. And that
    the part that confuses me. Why would Kodo be a resource adaptor? I thought it used a resource
    adaptor, which I think is the same thing as a connection factory.
    Anyway, I'm puzzled, and I'm hoping that someone could straighten me out.
    David Ezzio--
    Marc Prud'hommeaux [email protected]
    SolarMetric Inc. http://www.solarmetric.com
    Kodo Java Data Objects Full featured JDO: eliminate the SQL from your code

  • I'm a bit confused about standby log files

    Hi all,
    I'm a bit confused about something and wondering if someone can explain.
    I have a Primary database that ships logs to a Logical Standby database.
    Everything appears to be working properly. If I check the v$archived_log table in the Primary and compare it to the dba_logstdby_log view in the Logical Standby, I'm seeing that logs are being applied.
    On the logical standby, I have the following configured for log_archive_dest_n parameters:
    *.log_archive_dest_1='LOCATION=/u01/oracle/archivedlogs/ORADB1
    VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PNX8A_GMD'
    *.log_archive_dest_2='LOCATION=/u02/oracle/archivedlogs/ORADB1
    VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PNX8A_GMD'
    *.log_archive_dest_3='LOCATION=/u03/oracle/archivedlogs/ORADB1
    VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PNX8A_GMD'
    *.log_archive_dest_4='SERVICE=PNX8A_WDC ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=PNX8A_WDC'
    *.log_archive_dest_5='LOCATION=/u01/oracle/standbylogs/ORADB1
    VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=PNX8A_GMD'
    *.log_archive_dest_6='LOCATION=/u02/oracle/standbylogs/ORADB1
    VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=PNX8A_GMD'
    *.log_archive_dest_7='LOCATION=/u03/oracle/standbylogs/ORADB1
    VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=PNX8A_GMD'
    Here is my confusion now. Before converting from a Physical standby database to a Logical Standby database, I was under the impression that I needed the standby logs (i.e. log_archive_dest_5, 6 and 7 above) because a Physical Standby database would receive the redo from the primary and write it into the standby logs before applying the redo in the standby logs to the Physical standby database.
    I've now converted to a Logical Standby database. What's happening is that the standby logs are accumulating in the directory pointed to by log_archive_dest_6 above (/u02/oracle/standbylogs/ORADB1). They do not appear to be getting cleaned up by the database.
    In the Logical Standby database I do have STANDBY_FILE_MANAGEMENT parameter set to AUTO. Can anyone explain to me why standby log files would continue to accumulate and how I can get the Logical Standby database to remove them after they are no longer needed on the LSB db?
    Thanks in advance.
    John S

    JSebastian wrote:
    I assume you mean in your question, why on the standby database I am using three standby log locations (i.e. log_archive_dest_5, 6, and 7)?
    If that is your question, my answer is that I just figured more than one location would be safer but I could be wrong about this. Can you tell me if only one location should be sufficient for the standby logs? The more I think of this, that is probably correct because I assume that Log Transport services will re-request the log from the Primary database if there is some kind of error at the standby location with the standby log. Is this correct?As simple configure as below. Why more multiple destinations for standby?
    check notes Step by Step Guide on How to Create Logical Standby [ID 738643.1]
    >
    LOG_ARCHIVE_DEST_1='LOCATION=/arch1/boston VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=boston'
    LOG_ARCHIVE_DEST_2='SERVICE=chicago LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=chicago'
    LOG_ARCHIVE_DEST_3='LOCATION=/arch2/boston/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=boston'
    The following table describes the archival processing defined by the initialization parameters shown in Example 4-2.
         When the Boston Database Is Running in the Primary Role      When the Boston Database Is Running in the Logical Standby Role
    LOG_ARCHIVE_DEST_1      Directs archival of redo data generated by the primary database from the local online redo log files to the local archived redo log files in /arch1/boston/.      Directs archival of redo data generated by the logical standby database from the local online redo log files to the local archived redo log files in /arch1/boston/.
    LOG_ARCHIVE_DEST_2      Directs transmission of redo data to the remote logical standby database chicago.      Is ignored; LOG_ARCHIVE_DEST_2 is valid only when boston is running in the primary role.
    LOG_ARCHIVE_DEST_3      Is ignored; LOG_ARCHIVE_DEST_3 is valid only when boston is running in the standby role.      Directs archival of redo data received from the primary database to the local archived redo log files in /arch2/boston/.
    >
    Source:-
    http://docs.oracle.com/cd/B19306_01/server.102/b14239/create_ls.htm

  • Swamped and confused about products

    Hi guys,
    I am new to Oracle middleware products. After looking at a few articles, I am swamped and confused about those products, WebCenter (WC), Content Server (CS), Universal Content Management (UCM).
    1. WC has a built-in content database, part of Oracle database. CS also stores contents into Oracle database. Then what are differences between two types of content storage? Can I build WebCenter with Content Server as the content storage?
    2. WebCenter provides management functions on content. So does UCM. Users could contribute, review and release contents to web via both. Then what are differences between two types of content management? What more does UMC provide than the built-in content management in WC.
    3. Content Server needs a third-party web server (port:80) to publish its content. WebCenter Suite seems use Oracle HTTP Server (port:7777) to render web pages. Is it possible to integrate those two on one web server? Why is Oracle HTTP Server using a weird port?
    4. JDeveloper has the built-in OC4J container. But how can JDeveloper access or interact with Content Server or WC content database? Site Studio can access Content Server directly but only provides very limited portlet or ajax components. If I want to store web pages, static or dynamic, into WC and/or CS, which tool should I use?
    Can anybody help me with them? Or please point me to the right direction. I really appreciate it.
    thanks,
    Chen

    Plug it in and use the Transfer Purchases function, either from the resulting dialog box or from the File menu. If you need to authorize the computer, choose it from the Store menu.
    (65603)

  • Why After Effects CC won´t let me import an .obj file as AE CS6?

    Why After Effects CC won´t let me import an .obj file as AE CS6? How could I solve this?
    Thanks.

    Hi, it's been a long time. I'm sure it was something silly I was missing.  I'll be thinking about it, as soon as I remember I'll let you know.
    Maybe if you tell me what kind of message is AE giving you or something would help me to remeber.

  • I'm new and confused about "connection" things

    I'm new to BlackBerry--I have an 8320 Curve, I'm a small business owner and I'm not connected to a BES. I use the BB Desktop Manager to synchronize with Outlook and to back up my BB and I've done pretty well on most things, but I still have a few things I'm confused about. In this forum, I'll ask my "confusion questions" concerning data options.
    I have a "pay as you go" data plan with AT&T, my provider, because there is virtually no cell reception at my home where I also work. (I'm not using my BB for email since I'm in front of my computer most of the time). I have a home network set up and I've incorporated a router that supports wireless. I've connected a netbook to the wireless network and used it to surf the Internet, so, I know my wireless connection works. I've also managed to create a wireless connection on my BB to this network and on the Home screen, it will display my wireless network's name when I'm here at home, so, I know the device is connected to my network.
    BUT, I don't think I'm actually using my home wireless network...I tried the other day by browsing the Internet and then AT&T told me I incurred data charges--which I thought I shouldn't have if I wasn't using their network. Either I'm wrong about assuming they won't charge me if I use my network or I have something set up incorrectly on my BB...can anyone provide some guidance?
    Next, I don't truly understand what BIS is...I searched through the KB and couldn't find anything that actually defines BIS...could somebody please explain what BIS is?
    Finally, can somebody please explain the difference between "mobile network" and "wi-fi"? It seems, if I turn off "mobile network" I have no connection at all, including wi-fi. Is that the way things should be? But, I can turn off wi-fi and still get a connection (if I go outside as far from my house as possible and face south <g>).
    Thanks...and now I'm off to the BB Desktop Manager forum to ask a few questions there!
    Solved!
    Go to Solution.

    Hi and Welcome to the forums!
    I can help you with one or two of your questions:
    ejm1 wrote:
    Next, I don't truly understand what BIS is...I searched through the KB and couldn't find anything that actually defines BIS...could somebody please explain what BIS is?
    BIS is Blackberry Internet Service...a service, hosted by your carrier, that provides a conduit between internet facing email systems (e.g., Yahoo, GMail, etc.) and your BB. Inside of BIS, you create conduits for each of your email providers that you desire to receive OTA email for on your BB. BIS will check your provider on a periodic basis (documented to be every 15 minutes) and only when there is something that needs to come to your BB does it generate any traffic over the carrier network with your BB. BIS is an add-service, only available to those who, from their carrier, contract for The Blackberry Data Plan (as it is usually called) -- a generic data plan is not usually adequate to have access to BIS.
    ejm1 wrote:
    Finally, can somebody please explain the difference between "mobile network" and "wi-fi"? It seems, if I turn off "mobile network" I have no connection at all, including wi-fi. Is that the way things should be? But, I can turn off wi-fi and still get a connection (if I go outside as far from my house as possible and face south <g>).
    Mobile Network is your carriers network...data and/or voice services provided OTA for your BB. WiFi is wireless networking (802.11a/b/g/n) through your home WAP, hotspots, etc. I don't know if turning off Mobile Networ should or should not affect your ability to continue to use WiFi...I would think they are separate, but I don't have a BB model with WiFi.
    I know nothing about the pay-as-you-go programs, but from all you describe, it seems that you may well be using your carrier network at times. You will need to find out (and there are others here who know) how to shut off your carrier network yet leave WiFi running so that you don't incurr the costs of surfing via the carrier network.
    Hope that helps a little!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Confused about mpls mtu command

    hi,
    i confuse about mpls mtu command
    test platforms are 76 pfc3b,mpls,gigabit sip400 spa interface
    if i didn't config mpls mtu command ,using default,ping command is successful,if more than 1496 packets, i can see fragment from show ip traffic.
    if i config mpls mtu override 1504,ping command is sucessful too. there is fragment too when i use 1501 byte packet.
    if i config mpls mtu override 1524 byte.
    ping command failed if i use packet more than 1500, , all packet are droped,even 1501 byte.only 1500 byte packet can success.
    all config above interface mtu is 1500.
    this confused me.
    why i use default 1500 interace mtu, mpls mtu override 1504 ,ping packet can fragment,ping success, but i use mpls mtu override 1524, i can see fragment in show ip traffic,but ping command failed. i can't see packet in destination router,how this work.
    thank you!
    jun

    topology is simple
    7609-1--sip GE spa----7609-2--pos---7609-3--flexwan E1-----7604-1--ge--ce
    i config mpls mtu 1524 between 7609-1 and 7609-2 . and keep interface mtu 1500 default.
    ping packet from 7609-1 to 7604-1 loopback 0.
    ping 1500 byte packet is ok, but ping 1501 byte packet is totally lost.then i config mtu 1524 between 7604-1 and 7609-3, it is useless,notwork, i can't see packet coming from 7609-1 on 7604-1.
    but i add config mtu 1524 between 7609-1 and 7609-2. config mtu 1500 between 7604-1 and 7609-3,ping 1501 bytes from 7609-1 to 7604-1 loopback0 is ok. but i can see fragment from show ip traffic command in 7609-3.
    i have a question, why we need mpls mtu command. if we don't change interface mtu,just only config mpls mtu 1524, it doesn't work, if we just change mpls mtu,how it work in the ios. if we config interface mtu 1524,interface mtu size is big enough, it seems mpls mtu command is useless, we don't need mpls mtu command, just interface mtu 1524 is ok.
    why we need mpls mtu command. we just only change interface mtu is enough.
    thank you!
    jun

  • Confusion about disc setup.

    Hi all
    I've read lots and lots about how best to set up discs for Premiere Pro but I'm sitll confused about my own particular setup and was wondering if some nice person here could advise me on how I should proceed.
    I have just built a new PC for video and picture editing which consists of a 6 core Intel i7, Nvidia 680, 32GB Memory (Windows 7 Pro to utilise it all) and 3 hard drives consiting of 2 SSD's and 1 mechanical, all conected via 6Gbps SATA.
    I have the hard drives arranged as 128 GB SSD for system and programs, 1 TB larger mechanical for footage and 128GB SSD for cache.
    So in Premiere Pro I have Edit>Preferences>Media  as follows:
    Media cache files pointing at the cache SSD
    Media cache database pointing at the cache SSD
    In Project>Project Settings>Scrath disc I have:
    captured video same as project, that is the mechanical 1 TB footage drive
    captured audio likewise
    Video previews set to the cache SSD
    Audio previews likewise
    also in the general tab I have video rendering and playback as Mercury engine GPU acceleration
    Does that concur with the wisdom of you more experienced users?

    It should be fine. Just keep an eye on your preview files to ensure that they don't start to get too large for the SSD.
    They probably won't because rendering is required less often but you want to keep en eye on it. It all depends on your workflow and the tye of effects you use.

  • Bought lots of music last night. Tried to sync my 5th generation nano.It's been saying something like, "step two, attempting to sync a***'s ipod for about 8 hours. It won't let me stop it. I can't disconnect at this time. Please help.

    Bought lots of music last night. Tried to sync my 5th generation nano.It's been saying something like, "step two, attempting to sync a***'s ipod for about 8 hours. It won't let me stop it. I can't disconnect at this time. Please help.I thought about using control. alt delete and stopping it. It says I will lose any unsaved data. The music appears to be in my library, so I should be safe, right? However even if that works and I can disconnect my ipod, why isn't it syncing? I have a 2nd one to sync as well. I am frustrated. Thank you!

    Thanks you for replying planb77! My husband got home and told me to just disconnect the ipod. It had been at least 12 hours by then, The music was in my library but not on my ipod, He had me shut down, unplug my computer, take a rest from it and restart. I reset my ipod following instructions on the itunes site. I tried syncing again and was successful syncing both ipods. I really think it was great of you to take the time to help someone else.

  • Why my new iMac won't read my external hard drive?

    Why my new imac won't read my external hard drive??

    Liz,
    Sorry for not responding sooner, I support your position completely - as for the external drive I assumed that the individual was a previous mac user and knew about that (my mistake) at home I have a couple of external drives
    one drive is acknowledged regardless of format (mac/win) its a partitioned drive.... the other one - far as the mac is concerned does exist when i connect it.  I believe its a win only drive (will have to check the specs on it) but it works on the win-notebooks.
    so my point of reference was coming that perspective, with no additional posts I have to assume you had the correct answer.  have a great day.

  • Confusion about Master data text

    Hello all, I am little bit confused about the modelling concept in BI7. My confusion is about the Text table creation and its concepts.
    I got a Flat File data in my PC .Here is the scenario:
    Material Num, Material Name,  Material Description
                1111,       Desk ,               Dining table
    Material Name and Material Description are the Attributes of Materaial Number here. When i created Infoobjects Material Number , Material Name (Attribute). I can see that system created a Text table with Short descripton and Language key selected. I understand that i have to load master data and text separately. My question is How did that "short text exists" box got changed?
    In my case "Material Description" is showing Text data "dining table" correct? do i have to create this material description Infoobject as an attributes of Material Num, and later on load this as Text data to it?
    Could anyone tell me how Text data /table come in to play in this example?  Under data/texts tab i see that "language dependent" and "short description" are checked. why "long text exist" and "med text" are not ticked? AFter clicking this T table i know its empty at this point, but is this table waiting for the data to be loaded from "Material Description" Field? if anyone could clarify this confusion i will really appreciat it..thanks
    DK

    Hi DK,
    When you create a characteristic, by default 'With Master Data' & 'With Text' option would be checked.
    We need to manually un-check this if the characteristic created by us is not master or doesn't have text.
    Also, by default 'Short Text Exists' is checked. Short Text can hold description upto 20 chars,
    Medium Text - 40 Chars & Long Text - 60 Chars. Depending on the length of the maximum possible length of description that could come from our source, we need to check the appropriate Texts.
    And you need not create a separate InfoObject for 'MAterial Description'.
    While loading the texts (using Text Transformation & DTP), you can map the Material Description to '0TXTSH' (InfoObject for Short Text).
    Hope this helps!
    Meera

Maybe you are looking for